When updating a network and adding new ip-dhcp-host entry, the deamon
may crash. The problem is, we iterate over existing <host/> entries
trying to compare MAC addresses to see if there's already an existing
rule. However, not all entries are required to have MAC address. For
instance, the following is perfectly valid entry:
When the checking loop iterates over this, the entry's MAC address is
accessed directly. Well, the fix is obvious - check if the address is
defined before trying to compare it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add support for schema validation when passing in XML
The virDomainDefineXMLFlags and virDomainCreateXML APIs both
gain new flags allowing them to be told to validate XML.
This updates all the drivers to turn on validation in the
XML parser when the flags are set
Log dtrace/systemd probes at INFO level instead of DEBUG
Every dtrace/systemd probe also include a libvirt log message.
These are logged at level DEBUG currently, which means if you
want to see all probes they are drowned by the rest of the
DEBUG messages. Since we don't really use the INFO log level
for much, it seems reasonable to suggest we log all probes at
level INFO.
When debugging libvirt it is helpful to set probes around RPC
calls. We already have probes for libvirt's native RPC layer,
so it makes sense to add them for the DBus RPC layer too.
Add support for systemd-machined CreateMachineWithNetwork
systemd-machined introduced a new method CreateMachineWithNetwork
that obsoletes CreateMachine. It expects to be given a list of
VETH/TAP device indexes for the host side device(s) associated
with a container/machine.
This falls back to the old CreateMachine method when the new
one is not supported.
When we meet error in qemuMigrationPrepareAny and goto
cleanup with rc < 0, we forget clear the priv->origname and this
will make this vm migrate fail next time because leave a wrong
origname in priv, and will Generate a wrong cookie when do
migrate next time.
This patch will make priv->origname is NULL when migrate fail
in target host.
Ján Tomko [Wed, 7 Jan 2015 13:50:34 +0000 (14:50 +0100)]
Fix vmdef usage while in monitor in qemu process
Make local copy of the disk alias in qemuProcessInitPasswords,
instead of referencing the one in domain definition, which
might get freed if the domain crashes while we're in monitor.
Ján Tomko [Tue, 16 Dec 2014 08:30:49 +0000 (09:30 +0100)]
Fix vmdef usage while in monitor in qemuDomainHotplugVcpus
Exit the monitor right after we've done with it to get
the virDomainObjPtr lock back, otherwise we might be accessing
vm->def while it's being cleaned up by qemuProcessStop.
If the domain crashed while we were in the monitor, exit
early instead of changing vm->def which is now the persistent
definition.
check IOMMU group devices usage when preparing device for vfio passthrough
The virsh start <domain> fails with qemu error when the hostdevices of the
same iommu group are used actively by other vms. It is not clear which
hostdev from the same iommu group is used by any of the running guests.
User has to go through every guest xml to figure out who is using the
hostdev of same iommu group.
Solution:
Iterate the iommu group of the hostdev and error our neatly in case a
device in the same iommu group is busy. Reattach code also does the same
kind of check, remove duplicate code as well.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Kiarie Kahurani [Tue, 16 Dec 2014 04:30:06 +0000 (21:30 -0700)]
libxl: Add support for parsing/formating Xen XL config
Now that xenconfig supports parsing and formatting Xen's
XL config format, integrate it into the libxl driver's
connectDomainXML{From,To}Native functions.
Signed-off-by: Kiarie Kahurani <davidkiarie4@gmail.com> Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Jim Fehlig [Sat, 10 Jan 2015 00:12:52 +0000 (17:12 -0700)]
Introduce support for parsing/formatting Xen xl config format
Introduce a parser/formatter for the xl config format. Since the
deprecation of xm/xend, the VM config file format has diverged as
new features are added to libxl. This patch adds support for parsing
and formating the xl config format. It supports the existing xm config
format, plus adds support for spice graphics and xl disk config syntax.
Disk config is specified a bit differently in xl as compared to xm. In
xl, disk config consists of comma-separated positional parameters and
keyword/value pairs separated by commas. Positional parameters are
specified as follows
target, format, vdev, access
Supported keys for key=value options are
devtype, backendtype
The positional paramters can also be specified in key/value form. For
example the following xl disk config are equivalent
See $xen_sources/docs/misc/xl-disk-configuration.txt for more details.
xl disk config is parsed with the help of xlu_disk_parse() from
libxlutil, libxl's utility library. Although the library exists
in all Xen versions supported by the libxl virt driver, only
recently has the corresponding header file been included. A check
for the header is done in configure.ac. If not found, xlu_disk_parse()
is declared externally.
Signed-off-by: Kiarie Kahurani <davidkiarie4@gmail.com> Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Pavel Hrdina [Wed, 10 Dec 2014 14:31:23 +0000 (15:31 +0100)]
qemu_process: detect updated video ram size values from QEMU
QEMU internally updates the size of video memory if the domain XML had
provided too low memory size or there are some dependencies for a QXL
devices 'vgamem' and 'ram' size. We need to know about the changes and
store them into the status XML to not break migration or managedsave
through different libvirt versions.
The values would be loaded only if the "vgamem_mb" property exists for
the device. The presence of the "vgamem_mb" also tells that the
"ram_size" and "vram_size" exists for QXL devices.
Pavel Hrdina [Tue, 9 Dec 2014 15:21:45 +0000 (16:21 +0100)]
qemu_monitor: introduce new function to get QOM path
The search is done recursively only through QOM object that has a type
prefixed with "child<" as this indicate that the QOM is a parent for
other QOM objects.
The usage is that you give known device name with starting path where to
search.
Pavel Hrdina [Tue, 13 Jan 2015 12:33:43 +0000 (13:33 +0100)]
qemu_driver: fix setting vcpus for offline domain
Commit e3435caf fixed hot-plugging of vcpus with strict memory pinning
on NUMA hosts, but unfortunately it also broke updating number of vcpus
for offline guests using our API.
The issue is that we try to create a cpu cgroup for non-running guest
which fails as there are no cgroups for that domain. We should create
cgroups and update cpuset.mems only if we are hot-plugging.
So, there are still plenty of vNIC types that we don't know how to set
bandwidth on. Let's warn explicitly in case user has requested it
instead of pretending everything was set.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Shanzhi Yu [Sat, 6 Dec 2014 16:32:18 +0000 (00:32 +0800)]
qemu: snapshot: inactive external snapshot can't work after libvirtd restart
When create inactive external snapshot, after update disk definitions,
virDomainSaveConfig is needed, if not after restart libvirtd the new snapshot
file definitions in xml will be lost.
Reproduce steps:
1. prepare a shut off guest
$ virsh domstate rhel7 && virsh domblklist rhel7
shut off
There's this function virNetDevBandwidthParse which parses the
bandwidth XML snippet. But it's not clever much. For the
following XML it allocates the virNetDevBandwidth structure even
though it's completely empty:
<bandwidth>
</bandwidth>
Later in the code there are some places where we check if
bandwidth was set or not. And since we obtained pointer from the
parsing function we think that it is when in fact it isn't.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Give virDomainDef parser & formatter their own flags
The virDomainDefParse* and virDomainDefFormat* methods both
accept the VIR_DOMAIN_XML_* flags defined in the public API,
along with a set of other VIR_DOMAIN_XML_INTERNAL_* flags
defined in domain_conf.c.
This is seriously confusing & error prone for a number of
reasons:
- VIR_DOMAIN_XML_SECURE, VIR_DOMAIN_XML_MIGRATABLE and
VIR_DOMAIN_XML_UPDATE_CPU are only relevant for the
formatting operation
- Some of the VIR_DOMAIN_XML_INTERNAL_* flags only apply
to parse or to format, but not both.
This patch cleanly separates out the flags. There are two
distint VIR_DOMAIN_DEF_PARSE_* and VIR_DOMAIN_DEF_FORMAT_*
flags that are used by the corresponding methods. The
VIR_DOMAIN_XML_* flags received via public API calls must
be converted to the VIR_DOMAIN_DEF_FORMAT_* flags where
needed.
The various calls to virDomainDefParse which hardcoded the
use of the VIR_DOMAIN_XML_INACTIVE flag change to use the
VIR_DOMAIN_DEF_PARSE_INACTIVE flag.
Decouple CPU XML formatting from domain XML public API flags
The virCPUDefFormat* methods were relying on the VIR_DOMAIN_XML_*
flag definitions. It is not desirable for low level internal
functions to be coupled to flags for the public API, since they
may need to be called from several different contexts where the
flags would not be appropriate.
Eric Blake [Mon, 12 Jan 2015 23:13:21 +0000 (16:13 -0700)]
qemu: forbid second blockcommit during active commit
https://bugzilla.redhat.com/show_bug.cgi?id=1135339 documents some
confusing behavior when a user tries to start an inactive block
commit in a second connection while there is already an on-going
active commit from a first connection. Eventually, qemu will
support multiple simultaneous block jobs, but as of now, it does
not; furthermore, libvirt also needs an overhaul before we can
support simultaneous jobs. So, the best way to avoid confusing
ourselves is to quit relying on qemu to tell us about the situation
(where we risk getting in weird states) and instead forbid a
duplicate block commit ourselves.
Note that we are still relying on qemu to diagnose attempts to
interrupt an inactive commit (since we only track XML of an active
commit), but as inactive commit is less confusing for libvirt to
manage, there is less that can go wrong by leaving that detection
up to qemu.
* src/qemu/qemu_driver.c (qemuDomainBlockCommit): Hoist check for
active commit to occur earlier outside of conditions.
Fix flags passed to virDomainDefParseString by XenAPI driver
The XenAPI driver was passing the flags for
virDomainCreateXML straight into the virDomainDefParseString
method, even though they expect totally different sets of
flags. It should have been using VIR_DOMAIN_XML_INACTIVE
The virDomainDefineXML method is one of the few that still lacks
an 'unsigned int flags' parameter. This will be needed for adding
XML validation to this API. virDomainCreateXML fortunately already
has flags.
When we try to hotplug a channel chr device with no target, we
will get success (which should fail) in virDomainChrDefParseXML,
because we use goto cleanup this place and return an incomplete
definition (with no target). In qemuDomainAttachChrDevice,
we add it to the domain definition, but fail to remove it from
there when chardev-add fails, because virDomainChrRemove
matches chardevices according to the target name.
The device definition is then freed in qemuDomainAttachDeviceFlags,
leaving a stale pointer in the domain definition.
Signed-off-by: Luyao Huang <lhuang@redhat.com> Signed-off-by: Ján Tomko <jtomko@redhat.com>
qemu: Allow enabling/disabling features with host-passthrough
QEMU supports feature specification with -cpu host and we just skip
using that. Since QEMU developers themselves would like to use this
feature, this patch modifies the code to work.
Michal Privoznik [Mon, 12 Jan 2015 14:47:52 +0000 (15:47 +0100)]
qemuxml2argvtest: Fix test after change of qxl vgamem_mb default
Well, apparently it's possible for a patch to sneak in through
review process and break 'make check'. It happened just lately
with 0e502466acb84a which changed the default of vgamem_mb for
qxl device. However, there were left some domain XMLs within our
test suite relying on the old default. These should be updated to
match the change.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Daniel Hansel [Fri, 19 Dec 2014 14:49:35 +0000 (15:49 +0100)]
cpu: Bugfix for s390 CPU driver to return a host CPU model
The curent libvirt CPU driver for s390 does not return a host CPU model.
This patch returns 'host' according to the other platforms that would
not decode any CPU model.
This is an intermediate bugfix due to a discussion on OpenStack mailing
list. The final patch introducing the CPU model support for s390x will
exchange the hard-coded decode method.
Signed-off-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
John Ferlan [Fri, 9 Jan 2015 13:42:13 +0000 (08:42 -0500)]
virconf: Resolve a possible memory leak in virConfSetValue
Found this one by inspection... The API claims to "own" the input
value even in the case of error. However, in the initial entry
to the API if the value exists, was STRING, but without a str value
it just returned without freeing the 'value' which it claims to now
own. So I added the virConfFreeValue() call in order to resolve.
John Ferlan [Fri, 9 Jan 2015 15:48:37 +0000 (10:48 -0500)]
openvz: Check errors from virSocketAddrFormat
Commit id 'a4e86390' modified the command line to allow --ipadd multiple
times; however, it did not account for the condition where a NULL is
returned which will could lead to some interesting errors with multiple
--ipadd's without parameters.
John Ferlan [Fri, 9 Jan 2015 12:38:17 +0000 (07:38 -0500)]
openvz: Resolve Coverity RESOURCE_LEAK
Commit id 'a4e86390' modified the command line to allow --ipadd multiple
times, which caused Coverity to notice a latent memory leak with the
'ipAddr' string not being VIR_FREE()'d
Pavel Hrdina [Mon, 12 Jan 2015 12:18:46 +0000 (13:18 +0100)]
qxl: change the default value for vgamem_mb to 16 MiB
The default value should be 16 MiB instead of 8 MiB. Only really old
version of upstream QEMU used the 8 MiB as default for vga framebuffer.
Without this change if you update your libvirt where we introduced the
"vgamem" attribute for QXL video device the value will be set to 8 MiB,
but previously your guest had 16 MiB because we didn't pass any value to
QEMU command line which means QEMU used its own 16 MiB as default.
This will affect all users with guest's display resolution higher than
1920x1080.
docs: Document some -boot option limitations on UEFI
It was brought to my attention that some -boot options may not
work with UEFI. For instance, rebootTimeout is very SeaBIOS
specific,splash logo is not implemented yet on OVMF, and so on.
We should document this limitation at least.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Hao Liu [Thu, 11 Dec 2014 02:46:15 +0000 (10:46 +0800)]
virsh: Emit error for VSH_OT_DATA without VSH_OFLAG_REQ
Commit 6b9964 enforces checking invalid use of VSH_OT_STRING with
VSH_OFLAG_REQ. This commit tries to do the same thing to stop using
VSH_OT_DATA without VSH_OFLAG_REQ and also fix existing misuse.
Ján Tomko [Wed, 7 Jan 2015 15:49:00 +0000 (16:49 +0100)]
safezero: fall back to writing zeroes even when resizing
Remove the resize flag and use the same code path for all callers.
This flag was added by commit 18f0316 to allow virStorageFileResize
use 'safezero' while preserving the behavior.
Explicitly return -2 when a fallback to a different method should
be done, to make the code path more obvious.
Fail immediately when ftruncate fails in the mmap method,
as we did before commit 18f0316.
John Ferlan [Fri, 9 Jan 2015 12:36:01 +0000 (07:36 -0500)]
virsh.pod: Update description
The 'pool-build' command description for --overwrite and --no-overwrite
indicated usage for only 'filesystem' pools; however, the 'disk' pool
also supports the flags as of commit id 'afa1029a'. So add a description
for that usage.
Eric Blake [Thu, 8 Jan 2015 00:05:36 +0000 (17:05 -0700)]
maint: in src/Makefile.am, $(top_srcdir)/src is verbose
I noticed this while working on a previous commit. Why should
we be calling out '../src/' when it is sufficient to refer to just
'./'? Blind copy-and-paste runs rampant in this file :)
* src/Makefile.am (INCLUDES, *_CFLAGS): Shorten to $(srcdir).
Pavel Hrdina [Thu, 8 Jan 2015 06:54:22 +0000 (07:54 +0100)]
src/Makefile: Fix parallel build after xen_xl_disk parser introduction
Well, the parallel build doesn't work as there are not dependencies
set correctly. When running 'make -j' I see this error:
make[2]: Entering directory '/home/zippy/work/libvirt/libvirt.git/src'
GEN util/virkeymaps.h
GEN locking/lock_protocol.h
make[2]: *** No rule to make target 'xenconfig/xen_xl_disk.h', needed by 'all'. Stop.
make[2]: *** Waiting for unfinished jobs....
GEN lxc/lxc_controller_dispatch.h
The fix is to correctly set dependencies by letting make know that .c
and .h are to be generated from .l. Moreover, the section is moved
closer to the other section which uses it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Geoff Hickey [Wed, 7 Jan 2015 23:45:42 +0000 (18:45 -0500)]
vmx: Fix a VMX parsing problem
VMware ESX does not always set the "serialX.fileType" tag in VMX files. The
default value for this tag is "device", and when adding a new serial port
of this type VMware will omit the fileType tag. This caused libvirt to
fail to parse the VMX file. Fixed by making this tag optional and using
"device" as a default value. Also updated vmx2xmltest to test for this
case.
Eric Blake [Wed, 7 Jan 2015 23:32:32 +0000 (16:32 -0700)]
build: fix xenconfig VPATH builds
Ever since commit 2c78051 split out a helper library for the sake of
changing CFLAGS, a VPATH build with xenconfig enabled has failed:
CC xenconfig/libvirt_xenxldiskparser_la-xen_xl_disk.lo
../../src/xenconfig/xen_xl_disk.l:37:21: fatal error: xen_xl.h: No such file or directory
# include "xen_xl.h"
^
compilation terminated.
Makefile:9462: recipe for target 'xenconfig/libvirt_xenxldiskparser_la-xen_xl_disk.lo' failed
The solution is to tell the build to look for xen_xl.h relative
to $(srcdir), since we keep that file under version control.
[Not fixed here - the raw use of -Wno-unused-parameter in CFLAGS
is NOT portable; ideally, we should be doing a configure test
and only supplying that argument when we know the compiler supports
-Wunused-parameter; but that's a patch for another day]
[Not fixed here - there are still issues with parallel builds hitting
a race between generating the files and trying to compile/distribute
them]
* src/Makefile.am (libvirt_xenxldiskparser_la_CFLAGS): Add another
include directory.
qemu: Fix system pages handling in <memoryBacking/>
In one of my previous commits (311b4a67) I've tried to allow to
pass regular system pages to <hugepages>. However, there was a
little bug that wasn't caught. If domain has guest NUMA topology
defined, qemuBuildNumaArgStr() function takes care of generating
corresponding command line. The hugepages backing for guest NUMA
nodes is handled there too. And here comes the bug: the hugepages
setting from XML is stored in KiB internally, however, the system
pages size was queried and stored in Bytes. So the check whether
these two are equal was failing even if it shouldn't.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Stefan Berger [Wed, 7 Jan 2015 16:41:49 +0000 (11:41 -0500)]
nwfilter: Add support for icmpv6 filtering
Make use of the ebtables functionality to be able to filter certain
parameters of icmpv6 packets. Extend the XML parser for icmpv6 types,
type ranges, codes, and code ranges. Extend the nwfilter documentation,
schema, and test cases.
Being able to filter icmpv6 types and codes helps extending the DHCP
snooper for IPv6 and filtering at least some parameters of IPv6's NDP
(Neighbor Discovery Protocol) packets. However, the filtering will not
be as good as the filtering of ARP packets since we cannot
check on IP addresses in the payload of the NDP packets.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Peter Krempa [Wed, 7 Jan 2015 10:35:08 +0000 (11:35 +0100)]
qemu: Don't unref domain after exit from nested async job
In commit 540c339a2535ec30d79e5ef84d8f50a17bc60723 the whole domain
reference counting was refactored in the qemu driver. Domain jobs now
don't need to reference the domain object as they now expect the
reference from the calling function.
However, the patch forgot to remove the unref call in case we exit the
monitor when we were acquiring a nested job. This caused the daemon to
crash on a subsequent access to the domain object once we've done an
operation requiring a nested job for a monitor access.
An easy reproducer case:
1) Start a vm with qcow disks
2) virsh snapshot-create-as DOMNAME
3) virsh dumpxml DOMNAME
4) daemon crashes in a semi-random spot while accessing a now-removed VM
object.
Fortunately, the commit wasn't released yet, so there are no security
implications.
Reported-by: Shanzi Yu <shyu@redhat.com> Signed-off-by: Peter Krempa <pkrempa@redhat.com>
When migrate a vm, we will generate a xml via qemuDomainDefFormatLive and
pass this xml to target libvirtd. Libvirt will use the current network
state in def->data.network.actual to generate the xml, this will make
migrate failed when we set a network type guest interface use a macvtap
network as a source in a vm then migrate vm to another host(which has the
different macvtap network settings: different interface name, bridge name...)
Add a flag check in virDomainNetDefFormat, if we set a VIR_DOMAIN_XML_MIGRATABLE
flag when call virDomainNetDefFormat, we won't get the current vm interface
state.
Add missing VNC setup via Parallels SDK.
Parallels Cloud Server starts one VNC server per domain,
so we could process only one VNC server definition.
Network-based listening currently is unimplemented.
Signed-off-by: Alexander Burluka <aburluka@parallels.com>
When setting new bandwidth limits via
virDomainSetInterfaceParameters, the old ones are cleared first.
However, if setting the new ones fails, the old are already gone
and interface is left in inconsistent state. Therefore, right
before failing we ought to try to restore the old bandwidth.
Lack of a lease (whether mac is given or not) is a normal expected
scenario, since we are already filling in rv with nleases (which is
okay as 0 if there is no lease). There is no need to raise an error.
This fixes:
> virsh # net-dhcp-leases --mac 00:50:56:c0:00:01 default
> error: Failed to get leases info for default
> error: internal error: no lease with matching MAC address: 00:50:56:c0:00:01
Signed-off-by: Nehal J Wani <nehaljw.kkd1@gmail.com> Signed-off-by: Eric Blake <eblake@redhat.com>
We will get a warning when we have a guest in paused
status (caused by kernel panic) and restart libvirtd,
warning message like this:
Qemu reported unknown VM status: 'guest-panicked'
and this seems because we set a wrong status name in
qemu_monitor.c, and from qemu qapi-schema.json file
we know this status should named 'guest-panicked'.
Signed-off-by: Luyao Huang <lhuang@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
Eric Blake [Mon, 5 Jan 2015 23:38:50 +0000 (16:38 -0700)]
maint: update to latest gnulib
Another update is required to pick up today's gnulib fix for mingw
builds (now that gnulib turns on mingw's replacement printf that
understands %lld, it must also tell the compiler to respect the
improved definition of PRIdMAX and friends).
Cédric Bosdonnat [Wed, 12 Nov 2014 08:30:09 +0000 (09:30 +0100)]
Openvz --ipadd can be provided multiple times
Vzctl man page says that --ipadd can be provided multiple times to add
several IP addresses. Looping over the configured ip addresses to add
one --ipadd for each. This would even handle the multiple IPs handled
by openvz_conf.c
Domain conf: allow more than one IP address for net devices
Add the possibility to have more than one IP address configured for a
domain network interface. IP addresses can also have a prefix to define
the corresponding netmask.
Add a default implementation of virNetDevSetIPv4Address using netlink
and libnl. This avoids requiring /usr/sbin/ip or /usr/sbin/ifconfig
external binaries.
Cédric Bosdonnat [Thu, 18 Dec 2014 14:42:06 +0000 (15:42 +0100)]
Fix error when starting a container after an error
The typical case for the problem is starting a domain needing a network
that isn't started. Even after starting the network, we get an unknown error
when starting the container.
This is due to dynamic security label not being removed.
Chunyan Liu [Tue, 23 Dec 2014 06:36:05 +0000 (14:36 +0800)]
Add tests to xmconfigtest
Add tests to testing HVM default features (pae, acpi, apic)
conversion from xm config to libvirt xml. If no pae|acpi|apic
specified in xm config, after conversion, libvirt xml should
by default include:
<features>
<pae/>
<apic/>
<acpi/>
</features>
projects / libvirt.git / log