hw/riscv/virt.c: skip 'mmu-type' FDT if satp mode not set

The absence of a satp mode in riscv_host_cpu_init() is causing the
following error:

$ ./qemu/build/qemu-system-riscv64  -machine virt,accel=kvm \
    -m 2G -smp 1  -nographic -snapshot \
    -kernel ./guest_imgs/Image \
    -initrd ./guest_imgs/rootfs_kvm_riscv64.img \
    -append "earlycon=sbi root=/dev/ram rw" \
    -cpu host
**
ERROR:../target/riscv/cpu.c:320:satp_mode_str: code should not be
reached
Bail out! ERROR:../target/riscv/cpu.c:320:satp_mode_str: code should
not be reached
Aborted

The error is triggered from create_fdt_socket_cpus() in hw/riscv/virt.c.
It's trying to get satp_mode_str for a NULL cpu->cfg.satp_mode.map.

For this KVM cpu we would need to inherit the satp supported modes
from the RISC-V host. At this moment this is not possible because the
KVM driver does not support it. And even when it does we can't just let
this broken for every other older kernel.

Since mmu-type is not a required node, according to [1], skip the
'mmu-type' FDT node if there's no satp_mode set. We'll revisit this
logic when we can get satp information from KVM.

[1] https://github.com/torvalds/linux/blob/master/Documentation/devicetree/bindings/riscv/cpus.yaml

Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230706101738.460804-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: skip features setup for KVM CPUs

As it is today it's not possible to use '-cpu host' if the RISC-V host
has RVH enabled. This is the resulting error:

$ ./qemu/build/qemu-system-riscv64 \
    -machine virt,accel=kvm -m 2G -smp 1 \
    -nographic -snapshot -kernel ./guest_imgs/Image  \
    -initrd ./guest_imgs/rootfs_kvm_riscv64.img \
    -append "earlycon=sbi root=/dev/ram rw" \
    -cpu host
qemu-system-riscv64: H extension requires priv spec 1.12.0

This happens because we're checking for priv spec for all CPUs, and
since we're not setting  env->priv_ver for the 'host' CPU, it's being
default to zero (i.e. PRIV_SPEC_1_10_0).

In reality env->priv_ver does not make sense when running with the KVM
'host' CPU. It's used to gate certain CSRs/extensions during translation
to make them unavailable if the hart declares an older spec version. It
doesn't have any other use. E.g. OpenSBI version 1.2 retrieves the spec
checking if the CSR_MCOUNTEREN, CSR_MCOUNTINHIBIT and CSR_MENVCFG CSRs
are available [1].

'priv_ver' is just one example. We're doing a lot of feature validation
and setup during riscv_cpu_realize() that it doesn't apply to KVM CPUs.
Validating the feature set for those CPUs is a KVM problem that should
be handled in KVM specific code.

The new riscv_cpu_realize_tcg() helper contains all validation logic that
are applicable to TCG CPUs only. riscv_cpu_realize() verifies if we're
running TCG and, if it's the case, proceed with the usual TCG realize()
logic.

[1] lib/sbi/sbi_hart.c, hart_detect_features()

Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/riscv: virt: Convert fdt_load_addr to uint64_t

fdt_load_addr was previously declared as uint32_t which doe not match
with the return type of riscv_compute_fdt_addr().

This patch modifies the fdt_load_addr type from a uint32_t to a uint64_t
to match the riscv_compute_fdt_addr() return type.

This fixes calculating the fdt address when DRAM is mapped to higher
64-bit address.

Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Lakshmi Bai Raja Subramanian <lakshmi.bai.rajasubramanian@bodhicomputing.com>
[ Change by AF:
 - Cleanup commit title and message
]
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <168872495192.6334.3845988291412774261-1@git.sr.ht>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

riscv: Generate devicetree only after machine initialization is complete

If the devicetree is created before machine initialization is complete,
it misses dynamic devices. Specifically, the tpm device is not added
to the devicetree file and is therefore not instantiated in Linux.
Load/create devicetree in virt_machine_done() to solve the problem.

Cc: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Cc: Alistair Francis <alistair23@gmail.com>
Cc: Daniel Henrique Barboza <dbarboza@ventanamicro.c>
Fixes: 325b7c4e75 hw/riscv: Enable TPM backends
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706035937.1870483-1-linux@roeck-us.net>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv KVM_RISCV_SET_TIMER macro is not configured correctly

Should set/get riscv all reg timer,i.e, time/compare/frequency/state.

Signed-off-by: Yang Zhang <yang.zhang@hexintek.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1688
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230707032306.4606-1-gaoshanliukou@163.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Add disas support for BF16 extensions

Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230703071759.86775-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Set the correct exception for implict G-stage translation fail

The privileged spec states:
For a memory access made to support VS-stage address translation (such as
to read/write a VS-level page table), permissions are checked as though
for a load or store, not for the original access type. However, any
exception is always reported for the original access type (instruction,
load, or store/AMO).

The current implementation converts the access type to LOAD if implicit
G-stage translation fails which results in only reporting "Load guest-page
fault". This commit removes the convertion of access type, so the reported
exception conforms to the spec.

Signed-off-by: Jason Chien <jason.chien@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230627074915.7686-1-jason.chien@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Expose properties for BF16 extensions

Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230615063302.102409-6-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Add support for Zvfbfwma extension

Add trans_* and helper function for Zvfbfwma instructions.

Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230615063302.102409-5-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Add support for Zvfbfmin extension

Add trans_* and helper function for Zvfbfmin instructions.

Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230615063302.102409-4-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Add support for Zfbfmin extension

Add trans_* and helper function for Zfbfmin instructions.

Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230615063302.102409-3-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Add properties for BF16 extensions

Add ext_zfbfmin/zvfbfmin/zvfbfwma properties.
Add require check for BF16 extensions.

Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230615063302.102409-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

linux-user/riscv: Add syscall riscv_hwprobe

This patch adds the new syscall for the
"RISC-V Hardware Probing Interface"
(https://docs.kernel.org/riscv/hwprobe.html).

Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Robbin Ehn <rehn@rivosinc.com>
Message-Id: <06a4543df2aa6101ca9a48f21a3198064b4f1f87.camel@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/riscv/virt: Restrict ACLINT to TCG

The Advanced Core Local Interruptor (ACLINT) device can
only be used with TCG. Check for TCG enabled instead of
KVM being not. Only add the property when TCG is used.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230629121103.87733-3-philmd@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Add RVV registers to log

Print RvV extension register to log if VPU option is enabled.

Signed-off-by: Ivan Klokov <ivan.klokov@syntacore.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230629083730.386604-1-ivan.klokov@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Only build KVM guest with same wordsize as host

Per Anup Patel in [*]:

 > Currently, we only support running rv64 guest on rv64 host
 > and rv32 guest on rv32 host.
 >
 > In the future, we might support running rv32 guest on rv64
 > host but as of now we don't see a strong push for it.

Therefore, when only using the KVM accelerator it is pointless
to build qemu-system-riscv32 on a rv64 host (or qemu-system-riscv64
on a rv32 host). Restrict meson to only build the correct binary,
avoiding to waste ressources building unusable code.

[*] https://lore.kernel.org/qemu-devel/CAAhSdy2JeRHeeoEc1XKQhPO3aDz4YKeyQsPT4S8yKJcYTA+AiQ@mail.gmail.com/

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230627143235.29947-3-philmd@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Only unify 'riscv32/64' -> 'riscv' for host cpu in meson

We want to keep the ability to distinct between 32/64-bit host.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230627143235.29947-2-philmd@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

tests/qtest: sifive-e-aon-watchdog-test.c: Add QTest of watchdog of sifive_e

Add some simple tests of the watchdog timer in the always-on domain device
of HiFive 1 rev b.

Signed-off-by: Tommy Wu <tommy.wu@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230627141216.3962299-4-tommy.wu@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/riscv: sifive_e: Support the watchdog timer of HiFive 1 rev b.

Create the AON device when we realize the sifive_e machine.
This patch only implemented the functionality of the watchdog timer,
not all the functionality of the AON device.

Signed-off-by: Tommy Wu <tommy.wu@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230627141216.3962299-3-tommy.wu@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/misc: sifive_e_aon: Support the watchdog timer of HiFive 1 rev b.

The watchdog timer is in the always-on domain device of HiFive 1 rev b,
so this patch added the AON device to the sifive_e machine. This patch
only implemented the functionality of the watchdog timer.

Signed-off-by: Tommy Wu <tommy.wu@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230627141216.3962299-2-tommy.wu@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

tests/avocado: riscv: Enable 32-bit Spike OpenSBI boot testing

The 32-bit Spike boot issue has been fixed in the OpenSBI v1.3.
Let's enable the 32-bit Spike OpenSBI boot testing.

Signed-off-by: Bin Meng <bmeng@tinylab.org>
Message-Id: <20230630160717.843044-2-bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

roms/opensbi: Upgrade from v1.2 to v1.3

Upgrade OpenSBI from v1.2 to v1.3 and the pre-built bios images.

The v1.3 release includes the following commits:

440fa81 treewide: Replace TRUE/FALSE with true/false
6509127 Makefile: Remove -N ldflag to prevent linker RWX warning
65638f8 lib: utils/sys: Allow custom HTIF base address for RV32
f14595a lib: sbi: Allow platform to influence cold boot HART selection
6957ae0 platform: generic: Allow platform_override to select cold boot HART
cb7e7c3 platform: generic: Allow platform_override to perform firmware init
8020df8 generic/starfive: Add Starfive JH7110 platform implementation
6997552 lib: sbi_hsm: Rename 'priv' argument to 'arg1'
9e397e3 docs: domain_support: Use capital letter for privilege modes
9e0ba09 include: sbi: Fine grain the permissions for M and SU modes
aace1e1 lib: sbi: Use finer permission semantics for address validation
22dbdb3 lib: sbi: Add permissions for the firmware start till end
1ac14f1 lib: sbi: Use finer permission sematics to decide on PMP bits
44f736c lib: sbi: Modify the boot time region flag prints
20646e0 lib: utils: Use SU-{R/W/X} flags for region permissions during parsing
3e2f573 lib: utils: Disallow non-root domains from adding M-mode regions
59a08cd lib: utils: Add M-mode {R/W} flags to the MMIO regions
001106d docs: Update domain's region permissions and requirements
da5594b platform: generic: allwinner: Fix PLIC array bounds
ce2a834 docs: generic.md: fix typo of andes-ae350
8ecbe6d lib: sbi_hsm: handle failure when hart_stop returns SBI_ENOTSUPP
b1818ee include: types: add always inline compiler attribute
9c4eb35 lib: utils: atcsmu: Add Andes System Management Unit support
787296a platform: andes/ae350: Implement hart hotplug using HSM extension
7aaeeab lib: reset/fdt_reset_atcwdt200: Use defined macros and function in atcsmu.h
a990309 lib: utils: Fix reserved memory node for firmware memory
fefa548 firmware: Split RO/RX and RW sections
2f40a99 firmware: Move dynsym and reladyn sections to RX section
c10e3fe firmware: Add RW section offset in scratch
b666760 lib: sbi: Print the RW section offset
230278d lib: sbi: Add separate entries for firmware RX and RW regions
dea0922 platform: renesas/rzfive: Configure Local memory regions as part of root domain
33bf917 lib: utils: Add fdt_add_cpu_idle_states() helper function
c45992c platform: generic: allwinner: Advertise nonretentive suspend
c8ea836 firmware: Fix fw_rw_offset computation in fw_base.S
8050081 firmware: Not to clear all the MIP
84d15f4 lib: sbi_hsm: Use csr_set to restore the MIP
199189b lib: utils: Mark only the largest region as reserved in FDT
66b0e23 lib: sbi: Ensure domidx_to_domain_table is null-terminated
642f3de Makefile: Add missing .dep files for fw_*.elf.ld
09b34d8 include: Add support for byteorder/endianness conversion
680bea0 lib: utils/fdt: Use byteorder conversion functions in libfdt_env.h
b224ddb include: types: Add typedefs for endianness
aa5dafc include: sbi: Fix BSWAPx() macros for big-endian host
e3bf1af include: Add defines for SBI debug console extension
0ee3a86 lib: sbi: Add sbi_nputs() function
4e0572f lib: sbi: Add sbi_ngets() function
eab48c3 lib: sbi: Add sbi_domain_check_addr_range() function
5a41a38 lib: sbi: Implement SBI debug console extension
c43903c lib: sbi: Add console_puts() callback in the console device
29285ae lib: utils/serial: Implement console_puts() for semihosting
65c2190 lib: sbi: Speed-up sbi_printf() and friends using nputs()
321293c lib: utils/fdt: Fix fdt_pmu.c header dependency
aafcc90 platform: generic/allwinner: Fix sun20i-d1.c header dependency
745aaec platform: generic/andes: Fix ae350.c header dependency
99d09b6 include: fdt/fdt_helper: Change fdt_get_address() to return root.next_arg1
6861ee9 lib: utils: fdt_fixup: Fix compile error
4f2be40 docs: fix typo in fw.md
30ea806 lib: sbi_hart: Enable hcontext and scontext
81adc62 lib: sbi: Align SBI vendor extension id with mvendorid CSR
31b82e0 include: sbi: Remove extid parameter from vendor_ext_provider() callback
c100951 platform: generic: renesas: rzfive: Add support to configure the PMA
2491242 platform: generic: renesas: rzfive: Configure the PMA region
67b2a40 lib: sbi: sbi_ecall: Check the range of SBI error
5a75f53 lib: sbi/sbi_domain: cosmetic style fixes
bc06ff6 lib: utils/fdt/fdt_domain: Simplify region access permission check
17b3776 docs: domain_support: Update the DT example
1364d5a lib: sbi_hsm: Factor out invalid state detection
40f16a8 lib: sbi_hsm: Don't try to restore state on failed change
c88e039 lib: sbi_hsm: Ensure errors are consistent with spec
b1ae6ef lib: sbi_hsm: Move misplaced comment
07673fc lib: sbi_hsm: Remove unnecessary include
8a40306 lib: sbi_hsm: Export some functions
73623a0 lib: sbi: Add system suspend skeleton
c9917b6 lib: sbi: Add system_suspend_allowed domain property
7c964e2 lib: sbi: Implement system suspend
37558dc docs: Correct opensbi-domain property name
5ccebf0 platform: generic: Add system suspend test
908be1b gpio/starfive: add gpio driver and support gpio reset
4b28afc make: Add a command line option for debugging OpenSBI
e9d08bd lib: utils/i2c: Add minimal StarFive jh7110 I2C driver
568ea49 platform: starfive: add PMIC power ops in JH7110 visionfive2 board
506144f lib: serial: Cadence: Enable compatibility for cdns,uart-r1p8
1fe8dc9 lib: sbi_pmu: add callback for counter width
51951d9 lib: sbi_pmu: Implement sbi_pmu_counter_fw_read_hi
60c358e lib: sbi_pmu: Reserve space for implementation specific firmware events
548e4b4 lib: sbi_pmu: Rename fw_counter_value
b51ddff lib: sbi_pmu: Update sbi_pmu dev ops
641d2e9 lib: sbi_pmu: Use dedicated event code for platform firmware events
57d3aa3 lib: sbi_pmu: Introduce fw_counter_write_value API
c631a7d lib: sbi_pmu: Add hartid parameter PMU device ops
d56049e lib: sbi: Refactor the calls to sbi_hart_switch_mode()
e8e9ed3 lib: sbi: Set the state of a hart to START_PENDING after the hart is ready
c6a092c lib: sbi: Clear IPIs before init_warm_startup in non-boot harts
ed88a63 lib: sbi_scratch: Optimize the alignment code for alloc size
73ab11d lib: sbi: Fix how to check whether the domain contains fw_region
f64dfcd lib: sbi: Introduce sbi_entry_count() function
30b9e7e lib: sbi_hsm: Fix sbi_hsm_hart_start() for platform with hart hotplug
8e90259 lib: sbi_hart: clear mip csr during hart init
45ba2b2 include: Add defines for SBI CPPC extension
33caae8 lib: sbi: Implement SBI CPPC extension
91767d0 lib: sbi: Print the CPPC device name
edc9914 lib: sbi_pmu: Align the event type offset as per SBI specification
ee016a7 docs: Correct FW_JUMP_FDT_ADDR calculation example
2868f26 lib: utils: fdt_fixup: avoid buffer overrun
66fa925 lib: sbi: Optimize sbi_tlb
24dde46 lib: sbi: Optimize sbi_ipi
80078ab sbi: tlb: Simplify to tlb_process_count/tlb_process function
bf40e07 lib: sbi: Optimize sbi_tlb queue waiting
eeab500 platform: generic: andes/renesas: Add SBI EXT to check for enabling IOCP errata
f692289 firmware: Optimize loading relocation type
e41dbb5 firmware: Change to use positive offset to access relocation entries
bdb3c42 lib: sbi: Do not clear active_events for cycle/instret when stopping
674e019 lib: sbi: Fix counter index calculation for SBI_PMU_CFG_FLAG_SKIP_MATCH
f5dfd99 lib: sbi: Don't check SBI error range for legacy console getchar
7919530 lib: sbi: Add debug print when sbi_pmu_init fails
4e33530 lib: sbi: Remove unnecessary semicolon
6bc02de lib: sbi: Simplify sbi_ipi_process remove goto
dc1c7db lib: sbi: Simplify BITS_PER_LONG definition
f58c140 lib: sbi: Introduce register_extensions extension callback
e307ba7 lib: sbi: Narrow vendor extension range
042f0c3 lib: sbi: pmu: Remove unnecessary probe function
8b952d4 lib: sbi: Only register available extensions
767b5fc lib: sbi: Optimize probe of srst/susp
c3e31cb lib: sbi: Remove 0/1 probe implementations
33f1722 lib: sbi: Document sbi_ecall_extension members
d4c46e0 Makefile: Dereference symlinks on install
8b99a7f lib: sbi: Fix return of sbi_console_init
264d0be lib: utils: Improve fdt_serial_init
9a0bdd0 lib: utils: Improve fdt_ipi
122f226 lib: utils: Improve fdt_timer
df75e09 lib: utils/ipi: buffer overrun aclint_mswi_cold_init
bdde2ec lib: sbi: Align system suspend errors with spec
aad7a37 include: sbi_scratch: Add helper macros to access data type
5cf9a54 platform: Allow platforms to specify heap size
40d36a6 lib: sbi: Introduce simple heap allocator
2a04f70 lib: sbi: Print scratch size and usage at boot time
bbff53f lib: sbi_pmu: Use heap for per-HART PMU state
ef4542d lib: sbi: Use heap for root domain creation
66daafe lib: sbi: Use scratch space to save per-HART domain pointer
fa5ad2e lib: utils/gpio: Use heap in SiFive and StartFive GPIO drivers
903e88c lib: utils/i2c: Use heap in DesignWare and SiFive I2C drivers
5a8cfcd lib: utils/ipi: Use heap in ACLINT MSWI driver
3013716 lib: utils/irqchip: Use heap in PLIC, APLIC and IMSIC drivers
7e5636a lib: utils/timer: Use heap in ACLINT MTIMER driver
3c1c972 lib: utils/fdt: Use heap in FDT domain parsing
acbd8fc lib: utils/ipi: Use scratch space to save per-HART MSWI pointer
f0516be lib: utils/timer: Use scratch space to save per-HART MTIMER pointer
b3594ac lib: utils/irqchip: Use scratch space to save per-HART PLIC pointer
1df52fa lib: utils/irqchip: Don't check hartid in imsic_update_hartid_table()
355796c lib: utils/irqchip: Use scratch space to save per-HART IMSIC pointer
524feec docs: Add OpenSBI logo and use it in the top-level README.md
932be2c README.md: Improve project copyright information
8153b26 platform/lib: Set no-map attribute on all PMP regions
d64942f firmware: Fix find hart index
27c957a lib: reset: Move fdt_reset_init into generic_early_init
8bd666a lib: sbi: check A2 register in ecall_dbcn_handler.
2552799 include: Bump-up version to 1.3

Signed-off-by: Bin Meng <bmeng@tinylab.org>
Message-Id: <20230630160717.843044-1-bmeng@tinylab.org>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: update cur_pmbase/pmmask based on mode affected by MPRV

Pointer mask is also affected by MPRV which means cur_pmbase/pmmask
should also take MPRV into consideration. As pointer mask for instruction
is not supported currently, so we can directly update cur_pmbase/pmmask
based on address related mode and xlen affected by MPRV now.

Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230614032547.35895-3-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Add additional xlen for address when MPRV=1

As specified in privilege spec:"When MPRV=1, load and store memory
addresses are treated as though the current XLEN were set to MPP’s
XLEN". So the xlen for address may be different from current xlen.

Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230614032547.35895-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv/cpu.c: fix veyron-v1 CPU properties

Commit 7f0bdfb5bfc2 ("target/riscv/cpu.c: remove cfg setup from
riscv_cpu_init()") removed code that was enabling mmu, pmp, ext_ifencei
and ext_icsr from riscv_cpu_init(), the init() function of
TYPE_RISCV_CPU, parent type of all RISC-V CPUss. This was done to force
CPUs to explictly enable all extensions and features it requires,
without any 'magic values' that were inherited by the parent type.

This commit failed to make appropriate changes in the 'veyron-v1' CPU,
added earlier by commit e1d084a8524a. The result is that the veyron-v1
CPU has ext_ifencei, ext_icsr and pmp set to 'false', which is not the
case.

The reason why it took this long to notice (thanks LIU Zhiwei for
reporting it) is because Linux doesn't mind 'ifencei' and 'icsr' being
absent in the 'riscv,isa' DT, implying that they're both present if the
'i' extension is enabled. OpenSBI also doesn't error out or warns about
the lack of 'pmp', it'll just not protect memory pages.

Fix it by setting them to 'true' in rv64_veyron_v1_cpu_init() like
7f0bdfb5bfc2 already did with other CPUs.

Reported-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Fixes: 7f0bdfb5bfc2 ("target/riscv/cpu.c: remove cfg setup from riscv_cpu_init()")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-Id: <20230620152443.137079-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Remove redundant assignment to SXL

SXL is initialized as env->misa_mxl which is also the mxl value.
So we can just remain it unchanged to keep it read-only.

Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230603134236.15719-4-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Support MSTATUS.MPV/GVA only when RVH is enabled

MPV and GVA bits are added by hypervisor extension to mstatus
and mstatush (if MXLEN=32).

Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230603134236.15719-3-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Make MPV only work when MPP != PRV_M

Upon MRET or explicit memory access with MPRV=1, MPV should be ignored
when MPP=PRV_M.

Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230603134236.15719-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

disas/riscv: Add support for XThead* instructions

Support for emulating XThead* instruction has been added recently.
This patch adds support for these instructions to the RISC-V disassembler.

Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230612111034.3955227-9-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

disas/riscv: Add support for XVentanaCondOps

This patch adds XVentanaCondOps support to the RISC-V disassembler.

Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230612111034.3955227-8-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

disas/riscv: Provide infrastructure for vendor extensions

A previous patch provides a pointer to the RISCVCPUConfig data.
Let's use this to add the necessary code for vendor extensions.
This patch does not change the current behaviour, but clearly
defines how vendor extension support can be added to the disassembler.

Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230612111034.3955227-7-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

disas/riscv: Encapsulate opcode_data into decode

This patch adds a reference to a struct rv_opcode_data object
into struct rv_decode. This further allows to remove all references
to the global variable opcode_data (which is renamed to rvi_opcode_data).

This patch does not introduce any functional change, but prepares
the code for more struct rv_opcode_data objects in the future.

This patch is based on previous work from Liu Zhiwei:
  https://lists.nongnu.org/archive/html/qemu-devel/2022-08/msg03662.html

Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230612111034.3955227-6-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

disas/riscv: Make rv_op_illegal a shared enum value

The enum value 'rv_op_illegal' does not represent an
instruction, but is a catch-all value in case we have
no match in the decoder. Let's make the value a shared
one, so that other compile units can reuse it.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230612111034.3955227-5-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

disas/riscv: Move types/constants to new header file

In order to enable vendor disassembler support, we need to
move types and constants into a header file so that other
compilation units can use them as well.

This patch does not introduce any functional changes.

Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230612111034.3955227-4-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Factor out extension tests to cpu_cfg.h

This patch moves the extension test functions that are used
to gate vendor extension decoders, into cpu_cfg.h.
This allows to reuse them in the disassembler.

This patch does not introduce new functionality.
However, the patch includes a small change:
The parameter for the extension test functions has been changed
from 'DisasContext*' to 'const RISCVCPUConfig*' to keep
the code in cpu_cfg.h self-contained.

Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-Id: <20230612111034.3955227-3-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Use xl instead of mxl for disassemble

Disassemble function(plugin_disas, target_disas, monitor_disas) will
always call set_disas_info before disassembling instructions.

plugin_disas  and target_disas will always be called under a TB, which
has the same XLEN.

We can't ensure that monitor_disas will always be called under a TB,
but current XLEN will still be a better choice, thus we can ensure at
least the disassemble of the nearest one TB is right.

Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230612111034.3955227-2-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

Merge tag 'pull-vfio-20230710' of https://github.com/legoater/qemu into staging

vfio queue:

* Fixes in error handling paths of VFIO PCI devices
* Improvements of reported errors for VFIO migration
* Linux header update
* Enablement of AtomicOps completers on root ports
* Fix for unplug of passthrough AP devices

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmSrug0ACgkQUaNDx8/7
# 7KHYCRAAt6UeZi8nKPlN+cs6guOagCcAJOu13nm7XN0bFxjYf/Q2t618cpM7PLSk
# h+4VGsMUVJ1dumcCkBmv7LAn0G6CpVR3VDi5QuGfMODRhpWfSoaypPIizRgrbarL
# lSyaVaPIaddlDZ4AIfFA9Ebnytvm5/ecsyTr0cv7OejVKWI/jN6bC/v36AmNQKKQ
# J5RCDpQ6fOsdqf0Dzvn7xjuHRE4DYtsWkVoslDoBQMgPWHLF8UwRu/OPD6cBQYAR
# /fmgoOkkNDMdN3laqwAyfAUjKfOFpLuZzJ5KNFjtkBiktm66dw4Y8/lWoChVR+S6
# PRZ3nk0HxyzB96zCytfggBX905PBD54LIuockRaYKTlTxT19C3fDjDz5tsjKNhLR
# aFec4KiJaUJj0fa/Vw8DB/WUbCgbOXGHiWhY8vNdpVoc9AZe8xj9z4nB3hmzx1i/
# lZhsM/s3kTNHpVGlW7vTfbToFBmt1eoglu+ILe/HeHLi8LjzCsHy+wR5c0n0/HVI
# fLUuUS1AGQvi8+HCCUi7gwzpJkl4rPJsPx51wfXJk+q/3GQ8g9Mg9qotHNHm4N60
# zq/I5VqqEkJzdaMjup04ZqsMAWqGrnU2f4aNPvBhgaeO9CQE/buIsA34buQRwiG4
# wTodqm0jrkx0Z59jliZ0mFU/LxMvhMaQCEh+OdyZ9vRtfLBjF4c=
# =U2Hc
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 10 Jul 2023 08:58:05 AM BST
# gpg:                using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B  0B60 51A3 43C7 CFFB ECA1

* tag 'pull-vfio-20230710' of https://github.com/legoater/qemu:
  vfio/pci: Enable AtomicOps completers on root ports
  pcie: Add a PCIe capability version helper
  s390x/ap: Wire up the device request notifier interface
  linux-headers: update to v6.5-rc1
  vfio: Fix null pointer dereference bug in vfio_bars_finalize()
  vfio/migration: Return bool type for vfio_migration_realize()
  vfio/migration: Remove print of "Migration disabled"
  vfio/migration: Free resources when vfio_migration_realize fails
  vfio/migration: Change vIOMMU blocker from global to per device
  vfio/pci: Disable INTx in vfio_realize error path
  hw/vfio/pci-quirks: Sanitize capability pointer

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

vfio/pci: Enable AtomicOps completers on root ports

Dynamically enable Atomic Ops completer support around realize/exit of
vfio-pci devices reporting host support for these accesses and adhering
to a minimal configuration standard.  While the Atomic Ops completer
bits in the root port device capabilities2 register are read-only, the
PCIe spec does allow RO bits to change to reflect hardware state.  We
take advantage of that here around the realize and exit functions of
the vfio-pci device.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Robin Voetter <robin@streamhpc.com>
Tested-by: Robin Voetter <robin@streamhpc.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>

pcie: Add a PCIe capability version helper

Report the PCIe capability version for a device

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Robin Voetter <robin@streamhpc.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>

s390x/ap: Wire up the device request notifier interface

Let's wire up the device request notifier interface to handle device unplug
requests for AP.

Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20230530225544.280031-1-akrowiak@linux.ibm.com/
Signed-off-by: Cédric Le Goater <clg@redhat.com>

linux-headers: update to v6.5-rc1

Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>

vfio: Fix null pointer dereference bug in vfio_bars_finalize()

vfio_realize() has the following flow:
1. vfio_bars_prepare() -- sets VFIOBAR->size.
2. msix_early_setup().
3. vfio_bars_register() -- allocates VFIOBAR->mr.

After vfio_bars_prepare() is called msix_early_setup() can fail. If it
does fail, vfio_bars_register() is never called and VFIOBAR->mr is not
allocated.

In this case, vfio_bars_finalize() is called as part of the error flow
to free the bars' resources. However, vfio_bars_finalize() calls
object_unparent() for VFIOBAR->mr after checking only VFIOBAR->size, and
thus we get a null pointer dereference.

Fix it by checking VFIOBAR->mr in vfio_bars_finalize().

Fixes: 89d5202edc50 ("vfio/pci: Allow relocating MSI-X MMIO")
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>

vfio/migration: Return bool type for vfio_migration_realize()

Make vfio_migration_realize() adhere to the convention of other realize()
callbacks(like qdev_realize) by returning bool instead of int.

Suggested-by: Cédric Le Goater <clg@redhat.com>
Suggested-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>

vfio/migration: Remove print of "Migration disabled"

Property enable_migration supports [on/off/auto].
In ON mode, error pointer is passed to errp and logged.
In OFF mode, we doesn't need to log "Migration disabled" as it's intentional.
In AUTO mode, we should only ever see errors or warnings if the device
supports migration and an error or incompatibility occurs while further
probing or configuring it. Lack of support for migration shoundn't
generate an error or warning.

Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>

vfio/migration: Free resources when vfio_migration_realize fails

When vfio_realize() succeeds, hot unplug will call vfio_exitfn()
to free resources allocated in vfio_realize(); when vfio_realize()
fails, vfio_exitfn() is never called and we need to free resources
in vfio_realize().

In the case that vfio_migration_realize() fails,
e.g: with -only-migratable & enable-migration=off, we see below:

(qemu) device_add vfio-pci,host=81:11.1,id=vfio1,bus=root1,enable-migration=off
0000:81:11.1: Migration disabled
Error: disallowing migration blocker (--only-migratable) for: 0000:81:11.1: Migration is disabled for VFIO device

If we hotplug again we should see same log as above, but we see:
(qemu) device_add vfio-pci,host=81:11.1,id=vfio1,bus=root1,enable-migration=off
Error: vfio 0000:81:11.1: device is already attached

That's because some references to VFIO device isn't released.
For resources allocated in vfio_migration_realize(), free them by
jumping to out_deinit path with calling a new function
vfio_migration_deinit(). For resources allocated in vfio_realize(),
free them by jumping to de-register path in vfio_realize().

Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Fixes: a22651053b59 ("vfio: Make vfio-pci device migration capable")
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>

vfio/migration: Change vIOMMU blocker from global to per device

Contrary to multiple device blocker which needs to consider already-attached
devices to unblock/block dynamically, the vIOMMU migration blocker is a device
specific config. Meaning it only needs to know whether the device is bypassing
or not the vIOMMU (via machine property, or per pxb-pcie::bypass_iommu), and
does not need the state of currently present devices. For this reason, the
vIOMMU global migration blocker can be consolidated into the per-device
migration blocker, allowing us to remove some unnecessary code.

This change also makes vfio_mig_active() more accurate as it doesn't check for
global blocker.

Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>

vfio/pci: Disable INTx in vfio_realize error path

When vfio realize fails, INTx isn't disabled if it has been enabled.
This may confuse host side with unhandled interrupt report.

Fixes: c5478fea27ac ("vfio/pci: Respond to KVM irqchip change notifier")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>

hw/vfio/pci-quirks: Sanitize capability pointer

Coverity reports a tained scalar when traversing the capabilities
chain (CID 1516589).  In practice I've never seen a device with a
chain so broken as to cause an issue, but it's also pretty easy to
sanitize.

Fixes: f6b30c1984f7 ("hw/vfio/pci-quirks: Support alternate offset for GPUDirect Cliques")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>

Merge tag 'pull-tcg-20230709' of https://gitlab.com/rth7680/qemu into staging

crypto: Provide aes-round.h and host accel

# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmSqvGodHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV+1bgf9EG57jfnCQLCfMQ6C
# 0bQ0MaeAkGg+7+mUwyi3OPB1VO0yjEKv5pWEnolzrGud35P0KsyoO+msqGqxnbMv
# IbhPkQZbmfMsGFPG1DbswjiwmQU5cV+ciONDM+C+qepnuUN+JrzIDHoEFzQRFoQo
# eQL/LnuyUkYBvR7YCKNJxFHtwILKcYQPH4jiC6a92C11AzYjDfilSxnuQ2RwL3Tn
# Zwf8TKJP5QGExvUdtm8f6xJ1LT7WAvsk9ZTwudE/+XRTnw8RWk6RmZSEQPx+cBdI
# p3opaoxkkMrdmcaXbr+9eSfBGq2gsVkKYPiyTDuwVW26575Nob9ZmodT3oSBNlkC
# +njd4w==
# =Nf5i
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 09 Jul 2023 02:55:54 PM BST
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]

* tag 'pull-tcg-20230709' of https://gitlab.com/rth7680/qemu: (37 commits)
  crypto: Unexport AES_*_rot, AES_TeN, AES_TdN
  crypto: Remove AES_imc
  crypto: Implement aesdec_IMC with AES_imc_rot
  crypto: Remove AES_shifts, AES_ishifts
  target/riscv: Use aesdec_ISB_ISR_IMC_AK
  target/riscv: Use aesenc_SB_SR_MC_AK
  target/riscv: Use aesdec_IMC
  target/riscv: Use aesdec_ISB_ISR_AK
  target/riscv: Use aesenc_SB_SR_AK
  target/arm: Use aesdec_IMC
  target/arm: Use aesenc_MC
  target/arm: Use aesdec_ISB_ISR_AK
  target/arm: Use aesenc_SB_SR_AK
  target/arm: Demultiplex AESE and AESMC
  target/i386: Use aesdec_ISB_ISR_IMC_AK
  target/i386: Use aesenc_SB_SR_MC_AK
  target/i386: Use aesdec_IMC
  target/i386: Use aesdec_ISB_ISR_AK
  target/i386: Use aesenc_SB_SR_AK
  target/ppc: Use aesdec_ISB_ISR_AK_IMC
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Merge tag 'linux-user-fcntl64-pull-request' of https://github.com/hdeller/qemu-hppa into staging

linux-user: Fix fcntl64() and accept4() for 32-bit targets

A set of 3 patches:
The first two patches fix fcntl64() and accept4().
the 3rd patch enhances the strace output for pread64/pwrite64().

This pull request does not includes Richard's mmap2 patch:
https://patchew.org/QEMU/20230630132159.376995-1-richard.henderson@linaro.org/20230630132159.376995-12-richard.henderson@linaro.org/

Changes:
v3:
- added r-b from Richard to patches #1 and #2
v2:
- rephrased commmit logs
- return O_LARGFILE for fcntl() syscall too
- dropped #ifdefs in accept4() patch
- Dropped my mmap2() patch (former patch #3)
- added r-b from Richard to 3rd patch

Helge

# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZKl5RQAKCRD3ErUQojoP
# X82sAQDnW53s7YkU4sZ1YREPWPVoCXZXgm587jTrmwT4v9AenQEAlbKdsw4hzzr/
# ptuKvgZfZaIp5QjBUl/Dh/CI5aVOLgc=
# =hd4O
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 08 Jul 2023 03:57:09 PM BST
# gpg:                using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg:                 aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D  25F8 3E5F 3D04 A7A2 4603
#      Subkey fingerprint: BCE9 123E 1AD2 9F07 C049  BBDE F712 B510 A23A 0F5F

* tag 'linux-user-fcntl64-pull-request' of https://github.com/hdeller/qemu-hppa:
  linux-user: Improve strace output of pread64() and pwrite64()
  linux-user: Fix accept4(SOCK_NONBLOCK) syscall
  linux-user: Fix fcntl() and fcntl64() to return O_LARGEFILE for 32-bit targets

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

crypto: Unexport AES_*_rot, AES_TeN, AES_TdN

These arrays are no longer used outside of aes.c.

Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

crypto: Remove AES_imc

This array is no longer used.

Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

crypto: Implement aesdec_IMC with AES_imc_rot

This method uses one uint32_t * 256 table instead of 4,
which means its data cache overhead is less.

Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

crypto: Remove AES_shifts, AES_ishifts

These arrays are no longer used, replaced by AES_SH_*, AES_ISH_*.

Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/riscv: Use aesdec_ISB_ISR_IMC_AK

This implements the AES64DSM instruction.  This was the last use
of aes64_operation and its support macros, so remove them all.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/riscv: Use aesenc_SB_SR_MC_AK

This implements the AES64ESM instruction.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/riscv: Use aesdec_IMC

This implements the AES64IM instruction.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/riscv: Use aesdec_ISB_ISR_AK

This implements the AES64DS instruction.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/riscv: Use aesenc_SB_SR_AK

This implements the AES64ES instruction.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/arm: Use aesdec_IMC

This implements the AESIMC instruction.  We have converted everything
to crypto/aes-round.h; crypto/aes.h is no longer needed.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/arm: Use aesenc_MC

This implements the AESMC instruction.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/arm: Use aesdec_ISB_ISR_AK

This implements the AESD instruction.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/arm: Use aesenc_SB_SR_AK

This implements the AESE instruction.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

linux-user: Improve strace output of pread64() and pwrite64()

Make the strace look nicer for those two syscalls.

Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

linux-user: Fix accept4(SOCK_NONBLOCK) syscall

The Linux accept4() syscall allows two flags only: SOCK_NONBLOCK and
SOCK_CLOEXEC, and returns -EINVAL if any other bits have been set.

Change the qemu implementation accordingly, which means we can not use
the fcntl_flags_tbl[] translation table which allows too many other
values.

Beside the correction in behaviour, this actually fixes the accept4()
emulation for hppa, mips and alpha targets for which SOCK_NONBLOCK is
different than TARGET_SOCK_NONBLOCK (aka O_NONBLOCK).

The fix can be verified with the testcase of the debian lwt package,
which hangs forever in a read() syscall without this patch.

Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

linux-user: Fix fcntl() and fcntl64() to return O_LARGEFILE for 32-bit targets

When running a 32-bit guest on a 64-bit host, fcntl[64](F_GETFL) should
return with the TARGET_O_LARGEFILE flag set, because all 64-bit hosts
support large files unconditionally.

But on 64-bit hosts, O_LARGEFILE has the value 0, so the flag
translation can't be done with the fcntl_flags_tbl[]. Instead add the
TARGET_O_LARGEFILE flag afterwards.

Note that for 64-bit guests the compiler will optimize away this code,
since TARGET_O_LARGEFILE is zero.

Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

target/arm: Demultiplex AESE and AESMC

Split these helpers so that we are not passing 'decrypt'
within the simd descriptor.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/i386: Use aesdec_ISB_ISR_IMC_AK

This implements the AESDEC instruction.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/i386: Use aesenc_SB_SR_MC_AK

This implements the AESENC instruction.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/i386: Use aesdec_IMC

This implements the AESIMC instruction.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/i386: Use aesdec_ISB_ISR_AK

This implements the AESDECLAST instruction.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/i386: Use aesenc_SB_SR_AK

This implements the AESENCLAST instruction.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/ppc: Use aesdec_ISB_ISR_AK_IMC

This implements the VNCIPHER instruction.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/ppc: Use aesenc_SB_SR_MC_AK

This implements the VCIPHER instruction.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/ppc: Use aesdec_ISB_ISR_AK

This implements the VNCIPHERLAST instruction.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/ppc: Use aesenc_SB_SR_AK

This implements the VCIPHERLAST instruction.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

host/include/ppc: Implement aes-round.h

Detect CRYPTO in cpuinfo; implement the accel hooks.

Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

host/include/aarch64: Implement aes-round.h

Detect AES in cpuinfo; implement the accel hooks.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

host/include/i386: Implement aes-round.h

Detect AES in cpuinfo; implement the accel hooks.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

crypto: Add aesdec_ISB_ISR_AK_IMC

Add a primitive for InvSubBytes + InvShiftRows +
AddRoundKey + InvMixColumns.

Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

crypto: Add aesdec_ISB_ISR_IMC_AK

Add a primitive for InvSubBytes + InvShiftRows +
InvMixColumns + AddRoundKey.

Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

crypto: Add aesenc_SB_SR_MC_AK

Add a primitive for SubBytes + ShiftRows + MixColumns + AddRoundKey.

Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

crypto: Add aesdec_IMC

Add a primitive for InvMixColumns.

Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

crypto: Add aesenc_MC

Add a primitive for MixColumns.

Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

crypto: Add aesdec_ISB_ISR_AK

Add a primitive for InvSubBytes + InvShiftRows + AddRoundKey.

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

crypto: Add aesenc_SB_SR_AK

Start adding infrastructure for accelerating guest AES.
Begin with a SubBytes + ShiftRows + AddRoundKey primitive.

Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

crypto/aes: Add AES_SH, AES_ISH macros

These macros will constant fold and avoid the indirection through
memory when fully unrolling some new primitives.

Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/arm: Move aesmc and aesimc tables to crypto/aes.c

We do not currently have a table in crypto/ for just MixColumns.
Move both tables for consistency.

Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tests/multiarch: Add test-aes

Use a shared driver and backends for i386, aarch64, ppc64, riscv64.

Acked-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

util: Add cpuinfo-ppc.c

Move the code from tcg/.  Fix a bug in that PPC_FEATURE2_ARCH_3_10
is actually spelled PPC_FEATURE2_ARCH_3_1.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Merge tag 'trivial-patches-20230708' of https://gitlab.com/mjt0k/qemu into staging

qemu trivial patches for 2023-07-08

# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEe3O61ovnosKJMUsicBtPaxppPlkFAmSo5UsPHG1qdEB0bHMu
# bXNrLnJ1AAoJEHAbT2saaT5ZIygH/0z5heVC4CnU5sNuv8GRbXZL7sOXxvoOQf9K
# dEBD0/Lzu8QL7mJBpqPuzK4FN/CNnY2nUaGGn3k7U44MrsU6g2P5ksD4Y0hUebkZ
# sw+bsaqDeG0J+kZ9IN4V1iLoyGGQ53GDynisZMWY8w/hDmCkoRe5Xy2LZrXS7fgw
# LVT04wlxTYG/EwXqMukBYd/S/lap8pUnzgc+VngHmX5gBF4O7qIAZV1j5WobIW6S
# /OOOOBZ4YJU9Ha18H4DWrE5+ptfE2sfWAO0z+c/v3bpNTUb9bCyNIE3R3mUwg7z6
# i/96za3R9XH0ChoBWrKHtFn5wygUMGHt63JwIph0bwr73ENVlrE=
# =4nBR
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 08 Jul 2023 05:25:47 AM BST
# gpg:                using RSA key 7B73BAD68BE7A2C289314B22701B4F6B1A693E59
# gpg:                issuer "mjt@tls.msk.ru"
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" [undefined]
# gpg:                 aka "Michael Tokarev <mjt@debian.org>" [undefined]
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D  4324 457C E0A0 8044 65C5
#      Subkey fingerprint: 7B73 BAD6 8BE7 A2C2 8931  4B22 701B 4F6B 1A69 3E59

* tag 'trivial-patches-20230708' of https://gitlab.com/mjt0k/qemu:
  hw/arm/virt-acpi-build.c: Add missing header
  migration: unexport migrate_fd_error()
  migration: factor out "resume_requested" in qmp_migrate()
  qemu-options.hx: Fix indentation of some option descriptions
  vdpa: Sort vdpa_feature_bits array alphabetically
  vdpa: Delete duplicated VIRTIO_NET_F_RSS in vdpa_feature_bits
  hw: Simplify calls to pci_nic_init_nofail()
  trivial: man page: document display::gtk::zoom-to-fit
  target/avr: Fix handling of interrupts above 33.
  hw/riscv/virt.c: fix typo in 'aia' description

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

hw/arm/virt-acpi-build.c: Add missing header

virt-acpi-build.c uses warn_report. However, it doesn't include
qemu/error-report.h directly, it include qemu/error-report.h via trace.h
if we enable log trace backend. But if we disable the log trace backend
(e.g., --enable-trace-backends=nop), then virt-acpi-build.c will not
include qemu/error-report.h any more and it will lead to build errors.
Include qemu/error-report.h directly in virt-acpi-build.c to avoid the
errors.

Fixes: 451b157041 ("acpi: Align the size to 128k")
Signed-off-by: Peng Liang <tcx4c70@gmail.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(mjt: move the #include higher as suggested by Ani Sinha)

migration: unexport migrate_fd_error()

The only migrate_fd_error() call sites are in "migration/migration.c",
which is also where we define migrate_fd_error(). Make the function
static, and remove its declaration from "migration/migration.h".

Cc: Juan Quintela <quintela@redhat.com> (maintainer:Migration)
Cc: Leonardo Bras <leobras@redhat.com> (reviewer:Migration)
Cc: Peter Xu <peterx@redhat.com> (reviewer:Migration)
Cc: qemu-trivial@nongnu.org
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2018404
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

migration: factor out "resume_requested" in qmp_migrate()

It cuts back on those awkward, duplicated !(has_resume && resume)
expressions.

Cc: Juan Quintela <quintela@redhat.com> (maintainer:Migration)
Cc: Leonardo Bras <leobras@redhat.com> (reviewer:Migration)
Cc: Peter Xu <peterx@redhat.com> (reviewer:Migration)
Cc: qemu-trivial@nongnu.org
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2018404
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

qemu-options.hx: Fix indentation of some option descriptions

The description of the options starts at column 16, so fix
this in some runaway lines for a more uniform output.

While we're at it, replace the capital "NOTE" with "Note"
since this seems to be the more common capitalization in
qemu-options.hx.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

vdpa: Sort vdpa_feature_bits array alphabetically

This patch sorts the vdpa_feature_bits array
alphabetically in ascending order to avoid future duplicates.

Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

vdpa: Delete duplicated VIRTIO_NET_F_RSS in vdpa_feature_bits

This entry was duplicated on referenced commit. Removing it.

Fixes: 402378407dbd ("vhost-vdpa: multiqueue support")
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

hw: Simplify calls to pci_nic_init_nofail()

pci_nic_init_nofail() calls qemu_find_nic_model(), and this function
sets nd->model = g_strdup(default_model) if it has not been initialized
yet. So we don't have to set nd->model to the default_nic in the
calling sites.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

trivial: man page: document display::gtk::zoom-to-fit

Document display::gtk::zoom-to-fit.

info from: https://superuser.com/questions/1752209/qemu-zoom-to-fit-shortcut-or-cli-switch

Signed-off-by: Jan Kratochvil <jan@jankratochvil.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

target/avr: Fix handling of interrupts above 33.

This commit addresses a bug in the AVR interrupt handling code.
The modification involves replacing the usage of the ctz32 function
with ctz64 to ensure proper handling of interrupts above 33 in the AVR
target.

Previously, timers 3, 4, and 5 interrupts were not functioning correctly
because most of their interrupt vectors are numbered above 33.

Signed-off-by: Lucas Dietrich <ld.adecy@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Rolnik <mrolnik@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: updated subject line to have subsytem prefix)