Testing found an inventive way to cause an error at shutdown by providing the
parent name for the fc host creation using the "same name" as the HBA. Since
the code thus assumed the parent host name provided was the parent HBA and
just extracted out the host number and sent that along to the vport_destroy
this avoided checks made for equality.
So just add the equality check to that path to resolve.
Peter Krempa [Mon, 22 May 2017 15:48:09 +0000 (17:48 +0200)]
rpc: Bump maximum message size to 32M
While most of the APIs are okay with 16M messages, the bulk stats API
can run into the limit in big configurations. Before we devise a new
plan for this, bump this limit slightly to accomodate some more configs.
Pavel Hrdina [Mon, 15 May 2017 13:28:15 +0000 (15:28 +0200)]
conf: don't iterate over backcompat console in virDomainChrDefForeach
If the first console is just a copy of the first serial device we
don't need to iterate over the same device twice in order to perform
actions like security labeling, cgroup configuring, etc.
Currently only security SELinux manager was aware of this fact.
We have to use waitDomainJob instead of waitJob, because of it
unlock the domain until job has finished, so domain will be available
for other clients.
Signed-off-by: Konstantin Neumoin <kneumoin@virtuozzo.com>
Peter Krempa [Tue, 23 May 2017 15:21:56 +0000 (17:21 +0200)]
qemu: Properly check return value of VIR_STRDUP in qemuDomainGetBlockIoTune
Setting the 'group_name' for a disk would falsely trigger a error path
as in commit 4b57f76502 we did not properly check the return value of
VIR_STRDUP.
Jim Fehlig [Tue, 28 Mar 2017 23:34:16 +0000 (17:34 -0600)]
libxl: add default controllers for USB devices
Attempting to start a domain with USB hostdevs but no USB controllers
fails with the rather cryptic error
libxl: error: libxl_qmp.c:287:qmp_handle_error_response: received an
error message from QMP server: Bus 'xenusb-0.0' not found
This can be fixed by creating default USB controllers. When no USB
controllers are defined, create the number of 8 port controllers
necessary to accommodate the number of defined USB devices.
Note that USB controllers are already created as needed in the
domainAttachDevice code path. E.g. a USB controller will be created,
if necessary, when attaching a USB device with
'virsh attach-device dom usbdev.xml'.
It turns out that adding the host_mtu field to the PCI capabilities in
the guest bumps the length of PCI capabilities beyond the 32 byte
boundary, so the virtio-net device gets 64 bytes of ioport space
instead of 32, which offsets the address of all the other following
devices. Migration doesn't work very well when the location and length
of PCI capabilities of devices is changed between source and
destination.
This means that we need to make sure that the absence/presence of
host_mtu on the qemu commandline always matches between source and
destination, which means that we need to make setting of host_mtu an
opt-in thing (it can't happen automatically when the bridge being used
has a non-default MTU, which is what commit 2841e675 implemented).
I do want to re-implement this feature with an <mtu auto='on'/>
setting, but probably won't backport that to any stable branches, so
I'm first reverting the original commit, and that revert can be pushed
to the few releases that have been made since the original (3.1.0 -
3.3.0)
Jim Fehlig [Fri, 19 May 2017 21:52:04 +0000 (15:52 -0600)]
libxl: add default listen address for VNC and spice
If a VNC listen address is not specified in domXML, libxl
will default to 127.0.0.1, but this is never reflected in the domXML.
In the case of spice, a missing listen address resulted in listening
on all interfaces, i.e. '0.0.0.0'. If not specified, set the listen
address in virDomainGraphicsDef struct to the libxl default when
creating the frame buffer device. Additionally, set default spice
listen address to 127.0.0.1.
Michal Privoznik [Mon, 22 May 2017 09:44:26 +0000 (11:44 +0200)]
virStreamSparseSendAll: Reset @want in each iteration
There's a slight problem with the current function. Assume we are
currently in a data section and we have say 42 bytes until next
section. Therefore, just before (handler) is called to fill up
the buffer with data, @want is changed to 42 to match the amount
of data left in the current section. However, after hole is
processed, we are back in data section but with incredibly small
@want size. Nobody will ever reset it back. This results in
incredible data fragmentation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Peter Krempa [Fri, 12 May 2017 15:46:31 +0000 (17:46 +0200)]
qemu: hotplug: print correct vcpu when validating hot(un)plug config
The error message would contain first vcpu id after the list of vcpus
selected for modification. To print the proper vcpu id remember the
first vcpu selected to be modified.
Wang King [Sat, 20 May 2017 01:31:57 +0000 (09:31 +0800)]
util: Don't leak @reply in virSystemdGetMachineNameByPID
@reply is a DBusMessage object returned by virDBusCallMethod in
get machine object call path, dereference it before calling
virDBusCallMethod again to get machine name.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Julio Faracco [Sat, 20 May 2017 14:53:54 +0000 (11:53 -0300)]
test: fixing variable names for test suite inside configure.ac.
Both variables for gcov and oom have wrong names inside configure.ac.
For this reason, the Test Suite configuration is not showing the current
configuration.
Before patching:
configure: windres: no
configure:
configure: Test suite
configure:
configure: Coverage:
configure: Alloc OOM:
configure:
configure: Miscellaneous
After patching (using --enable-test-coverage and --enable-test-oom):
configure: windres: no
configure:
configure: Test suite
configure:
configure: Coverage: yes
configure: Alloc OOM: yes
configure:
configure: Miscellaneous
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Wim ten Have [Fri, 19 May 2017 14:38:43 +0000 (16:38 +0200)]
xenconfig: fix handling of NULL disk source
It is possible to crash libvirtd when converting xl native config to
domXML when the xl config contains an empty disk source, e.g. an empty
CDROM. Fix by checking that the disk source is non-NULL before parsing it.
Signed-off-by: Wim ten Have <wim.ten.have@oracle.com>
Peter Krempa [Thu, 18 May 2017 11:27:24 +0000 (13:27 +0200)]
qemu: monitor: Don't bother extracting vCPU halted state in text monitor
The code causes the 'offset' variable to be overwritten (possibly with
NULL if neither of the vCPUs is halted) which causes a crash since the
variable is still used after that part.
Additionally there's a bug, since strstr() would look up the '(halted)'
string in the whole string rather than just the currently processed line
the returned data is completely bogus.
Rather than switching to single line parsing let's remove the code
altogether since it has a commonly used JSON monitor alternative and
the data itself is not very useful to report.
Julio Faracco [Thu, 18 May 2017 01:53:23 +0000 (22:53 -0300)]
datatypes: removing unnecessary return statement.
There is a wrong 'return' statement after a 'goto' statement inside the
function virConnectCloseCallbackDataRegister(). This commit only removes
the 'return'.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Wang King [Thu, 18 May 2017 04:06:42 +0000 (12:06 +0800)]
util: Do not leak @handles in stop netlink event service
Commit e3ba4025 introduced srv->handles and VIR_RESIZE_N to allocate
@handles as necessary, but did not free the handles during when calling
virNetlinkEventServiceStop.
Wang King [Thu, 18 May 2017 04:06:41 +0000 (12:06 +0800)]
util: Deduplicate code in virNetlinkEventServiceStopAll
Commit 15a71e60 introduced the virNetlinkEventServiceStopAll function, and
the code in virNetlinkEventServiceStop is copied to this function, so just
call virNetlinkEventServiceStop instead.
Erik Skultety [Mon, 6 Mar 2017 16:18:48 +0000 (17:18 +0100)]
nodedev: Introduce mdev capability for mediated devices
Start discovering the mediated devices on the host system and format the
attributes for the mediated device into the XML. Compared to the parent
device which reports generic information about the abstract mediated
devices types, a child device only reports the type name it has been
instantiated from and the IOMMU group number, since that's device
specific compared to the rest of the info that can be gathered about
mediated devices at the moment.
This patch introduces both the formatting and parsing routines, updates
nodedev.rng schema, adding a testcase as well.
Erik Skultety [Mon, 6 Mar 2017 16:17:34 +0000 (17:17 +0100)]
nodedev: Introduce the mdev capability to a PCI parent device
The parent device needs to report the generic stuff about the supported
mediated devices types, like device API, available instances, type name,
etc. Therefore this patch introduces a new nested capability element of
type 'mdev_types' with the resulting XML of the following format:
Erik Skultety [Mon, 6 Mar 2017 16:20:00 +0000 (17:20 +0100)]
nodedev: Introduce new mdev_types and mdev nodedev capabilities
The reason for introducing two capabilities, one for the device itself
(cap 'mdev') and one for the parent device listing the available types
('mdev_types'), is that we should be able to do
'virsh nodedev-list --cap' not only for existing mdev devices but also
for devices that support creation of mdev devices, since one day libvirt
might be actually able to create the mdev devices in an automated way
(just like we do for NPIV/vHBA).
Erik Skultety [Wed, 26 Apr 2017 12:47:15 +0000 (14:47 +0200)]
mdev: Pass a uuidstr rather than an mdev object to some util functions
Namely, this patch is about virMediatedDeviceGetIOMMUGroup{Dev,Num}
functions. There's no compelling reason why these functions should take
an object, on the contrary, having to create an object every time one
needs to query the IOMMU group number, discarding the object afterwards,
seems odd.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Commit 8e09663 "pci: recognize/report GEN4 (PCIe 4.0) card 16GT/s Link
speed" introduced another speed into enum, but mistakenly also altered
field width, so one bit of link width was included there.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Michal Privoznik [Wed, 27 Apr 2016 12:21:10 +0000 (14:21 +0200)]
virsh: Implement sparse stream to vol-upload
Similarly to previous commit, implement sparse streams feature
for vol-upload. This is, however, slightly different approach,
because we must implement a function that will tell us whether
we are in a data section or in a hole. But there's no magic
hidden in here.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Tue, 12 Apr 2016 13:35:04 +0000 (15:35 +0200)]
virsh: Implement sparse stream to vol-download
Add a new --sparse switch that does nothing more than
enables the sparse streams feature for this command. Among with
the switch new helper function is introduced: virshStreamSkip().
This is the callback that is called whenever daemon sends us a
hole. In the callback we reflect the hole in underlying file by
seeking as many bytes as told.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
These flags to APIs will tell if caller wants to use sparse
stream for storage transfer. At the same time, it's safe to
enable them in storage driver frontend and rely on our backends
checking the flags. This way we can enable specific flags only on
some specific backends, e.g. enable
VIR_STORAGE_VOL_DOWNLOAD_SPARSE_STREAM for filesystem backend but
not iSCSI backend.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Tue, 12 Apr 2016 13:17:30 +0000 (15:17 +0200)]
gendispatch: Introduce @sparseflag for our calls
Now, not all APIs are going to support sparse streams. To some it
makes no sense at all, e.g. virDomainOpenConsole() or
virDomainOpenChannel(). To others, we will need a special flag to
indicate that client wants to enable sparse streams. Instead of
having to write RPC dispatchers by hand we can just annotate in
our .x files that a certain flag to certain RPC call enables this
feature. For instance:
Michal Privoznik [Wed, 27 Apr 2016 08:51:46 +0000 (10:51 +0200)]
fdstream: Implement sparse stream
Basically, what is needed here is to introduce new message type
for the messages passed between the event loop callbacks and the
worker thread that does all the I/O. The idea is that instead of
a queue of read buffers we will have a queue where "hole of size
X" messages appear. That way the event loop callbacks can just
check the head of the queue and see if the worker thread is in
data or a hole section and how long the section is.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Mon, 11 Apr 2016 09:58:19 +0000 (11:58 +0200)]
daemonStreamHandleRead: Wire up seekable stream
Whenever client is able to receive some data from stream
daemonStreamHandleRead is called. But now the behaviour of this
function needs to be changed a bit. Previously it just read data
from underlying file (of chardev or whatever) and sent those
through the stream to client. This model will not work any longer
because it does not differentiate whether underlying file is in
data or hole section. Therefore, at the beginning of this
function add code that checks this situation and acts
accordingly.
So after the this, when wanting to send some data we always check
whether we are not in a hole and if so, skip it an inform client
about its size.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Fri, 20 May 2016 14:35:13 +0000 (16:35 +0200)]
virNetClientStream: Wire up VIR_NET_STREAM_HOLE
Whenever server sends a client stream packet (either regular with
actual data or stream skip one) it is queued on @st->rx. So the
list is a mixture of both types of stream packets. So now that we
have all the helpers needed we can wire their processing up. But
since virNetClientStreamRecvPacket doesn't support
VIR_STREAM_RECV_STOP_AT_HOLE flag yet, let's turn all received
skips into zeroes repeating requested times.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Sun, 10 Apr 2016 13:48:27 +0000 (15:48 +0200)]
remote_driver: Implement virStreamSendHole
Now that we have RPC wrappers over VIR_NET_STREAM_HOLE we can
start wiring them up. This commit wires up situation when a
client wants to send a hole to daemon.
To keep stream offsets synchronous, upon successful call on the
daemon skip the same hole in local part of the stream.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This is a function that handles an incoming STREAM_HOLE packet.
Even though it is not wired up yet, it will be soon. At the
beginning do couple of checks whether server plays nicely and
sent us a STREAM_HOLE packed only after we've enabled sparse
streams. Then decodes the message payload to see how big the hole
is and stores it in passed @length argument.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Fri, 12 May 2017 09:26:33 +0000 (11:26 +0200)]
daemon: Implement VIR_NET_STREAM_HOLE handling
Basically, whenever the new type of stream packet arrives to the
daemon call this function that decodes it and calls
virStreamSendHole(). Otherwise a regular data stream packet has
arrived and therefore continue its processing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Wed, 13 Apr 2016 14:38:09 +0000 (16:38 +0200)]
Teach wireshark plugin about VIR_NET_STREAM_HOLE
Ideally, this would be generated, but to achieve that
corresponding XDR definitions needed to go into a different .x
file. But they belong just to the one that they are right now.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This is a special type of stream packet, that is bidirectional
and contains information regarding how many bytes each side will
be skipping in the stream.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Mon, 11 Apr 2016 14:50:04 +0000 (16:50 +0200)]
Add new flag to daemonCreateClientStream and virNetClientStreamNew
Add a new argument to daemonCreateClientStream in order to allow for
future expansion to mark that a specific stream can be used to skip
data, such as the case with sparsely populated files. The new flag will
be the eventual decision point between client/server to decide whether
both ends can support and want to use sparse streams.
A new bool 'allowSkip' is added to both _virNetClientStream and
daemonClientStream in order to perform the tracking.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Sat, 21 May 2016 12:25:14 +0000 (14:25 +0200)]
Introduce virStreamInData
This is just an internal API, that calls corresponding function
in stream driver. This function will set @data = 1 if the
underlying file is in data section, or @data = 0 if it is in a
hole. At any rate, @length is set to number of bytes remaining in
the section the file currently is.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Sat, 21 May 2016 13:47:39 +0000 (15:47 +0200)]
Introduce virStreamSparseSendAll
This is just a wrapper over new function that have been just
introduced: virStreamSendHole() . It's very similar to
virStreamSendAll() except it handles sparse streams well.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Sat, 21 May 2016 13:17:51 +0000 (15:17 +0200)]
Introduce virStreamSparseRecvAll
This is just a wrapper over new functions that have been just
introduced: virStreamRecvFlags(), virStreamRecvHole(). It's very
similar to virStreamRecvAll() except it handles sparse streams
well.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Fri, 20 May 2016 13:12:59 +0000 (15:12 +0200)]
Introduce VIR_STREAM_RECV_STOP_AT_HOLE flag
Add a new flag to virStreamRecvFlags in order to handle being able to
stop reading from the stream so that the consumer can generate a "hole"
in stream target. Generation of a hole replaces the need to receive and
handle a sequence of zero bytes for sparse stream targets.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Fri, 20 May 2016 13:03:11 +0000 (15:03 +0200)]
Introduce virStreamRecvHole
This function is basically a counterpart for virStreamSendHole().
If one side of a stream called virStreamSendHole() the other
should call virStreamRecvHole() to get the size of the hole.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Sun, 10 Apr 2016 10:01:20 +0000 (12:01 +0200)]
Introduce virStreamSendHole
This API is used to tell the other side of the stream to skip
some bytes in the stream. This can be used to create a sparse
file on the receiving side of a stream.
It takes @length argument, which says how big the hole is. This
skipping is done from the current point of stream. Since our
streams are not rewindable like regular files, we don't need
@whence argument like seek(2) has.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Thu, 19 May 2016 14:53:35 +0000 (16:53 +0200)]
Introduce virStreamRecvFlags
This patch is adding the virStreamRecvFlags as a variant to the
virStreamRecv function in order to allow for future expansion of
functionality for processing sparse streams using a @flags
argument.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Thu, 16 Jun 2016 08:42:47 +0000 (10:42 +0200)]
util: Introduce virFileInData
This function takes a FD and determines whether the current
position is in data section or in a hole. In addition to that,
it also determines how much bytes are there remaining till the
current section ends.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Thu, 13 Apr 2017 09:49:30 +0000 (11:49 +0200)]
virfdstream: Use messages instead of pipe
One big downside of using the pipe to transfer the data is that
we can really transfer just bare data. No metadata can be carried
through unless some formatted messages are introduced. That would
be quite painful to achieve so let's use a message queue. It's
fairly easy to exchange info between threads now that iohelper is
no longer used.
The reason why we cannot use the FD for plain files directly is
that despite us setting noblock flag on the FD, any
read()/write() blocks regardless (which is a show stopper since
those parts of the code are run from the event loop) and poll()
reports such FD as always readable/writable - even though the
subsequent operation might block.
The pipe is still not gone though. It is used to signal the event
loop that an event occurred (e.g. data is available for reading
in the queue, or vice versa).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Gordon Messmer [Fri, 12 May 2017 21:27:27 +0000 (14:27 -0700)]
virsh: add --io when attaching disks to guests
virt-install and virt-manager both default to explicitly setting
"io='native'" in the disk "driver" tag. virsh, however, does not and also
does not provide an option to specify that setting at all. As a result,
disks use a different IO mechanism (the default, "threads") when attached
post-setup using virsh. Adding this option allows users to keep disk
performance consistent for disks attached at install, and those attached
afterward.
Peter Krempa [Wed, 17 May 2017 15:16:15 +0000 (17:16 +0200)]
qemu: driver: Allow passing disk target as top image with block commit
Since we allow active layer block commit the users are allowed to commit
the top of the chain (e.g. vda) into the backing image. The API would
not accept that parameter, as it tried to look up the image in the
backing chain.
Add the ability to use the top level image target name explicitly as the
top image of the block commit operation.
Andrea Bolognani [Fri, 12 May 2017 12:38:08 +0000 (14:38 +0200)]
gic: Remove VIR_GIC_VERSION_DEFAULT
The QEMU default is GICv2, and some of the code in libvirt
relies on the exact value. Stop pretending that's not the
case and use GICv2 explicitly where needed.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Pavel Hrdina [Thu, 11 May 2017 12:09:35 +0000 (14:09 +0200)]
qemu: improve detection of UNIX path generated by libvirt
Currently we consider all UNIX paths with specific prefix as generated
by libvirt, but that's a wrong assumption. Let's make the detection
better by actually checking whether the whole path matches one of the
paths that we generate or generated in the past.
The UNIX path isn't stored in config XML since libvirt-1.3.1.
The debian etch distro was end-of-life a long time ago so we no
longer need the ULLONG_MAX hack. In any case gnulib now provides
an equivalent fix by default, and so our definition now triggers
syntax-check rule failure
src/internal.h:# define ULLONG_MAX ULONG_LONG_MAX
maint.mk: define the above via some gnulib .h file
maint.mk:843: recipe for target 'sc_prohibit_always-defined_macros' failed
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Ján Tomko [Fri, 17 Mar 2017 07:26:49 +0000 (08:26 +0100)]
qemu: format kernel_irqchip on the command line
Add kernel_irqchip=split/on to the QEMU command line
and a capability that looks for it in query-command-line-options
output. For the 'split' option, use a version check
since it cannot be reasonably probed.
If a shutdown is expected because it was triggered via libvirt we can
also expect the monitor to close. In those cases do not report an
internal error like:
"internal error: End of file from qemu monitor"
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
projects / libvirt.git / log