Erik Skultety [Tue, 3 Mar 2015 15:57:38 +0000 (16:57 +0100)]
storage: tweak condition to properly test lseek
According to the POSIX standard, off_t (returned by lseek) is defined as
signed integral type no shorter than int. Because our offset variable is defined
as unsigned long long, the original check was passed successfully if UINT64_MAX had
been used as offset value, due to implicit conversion.
Erik Skultety [Tue, 24 Feb 2015 16:25:55 +0000 (17:25 +0100)]
virsh: tweak domif-getlink link state reporting message
According to docs, we only support 2 link states for an interface
up/down, 'up' being the default state if link state is unspecified in
domain's XML, so the message when no link state is provided should be
changed a little.
Shanzhi Yu [Sat, 28 Feb 2015 09:51:36 +0000 (17:51 +0800)]
qemu: snapshot: Don't skip check for qcow2 format with network disks
When the domain's source disk type is network, if source protocol is rbd
or sheepdog, the 'if().. break' will end the current case, which lead to
miss check the driver type is raw or qcow2. Libvirt will allow to create
internal snapshot for a running domain with raw format disk which based
on rbd storage.
While both protocols support internal snapshots of the disk qemu is not
able to use it as it requires some place to store the memory image. The
check if the disk is backed by a qcow2 image needs to be executed
always.
The timestamp is invalid as the monitor was not entered for that domain.
We can use that to detect that the domain has an active job and report a
better error instead:
Instead of copying the whole object onto stack when calling the
function, just pass the pointer to the object and save up some
space on the stack. Moreover, this prepares the code to hide the
virNetworkObjList structure into network_conf.c and use accessors
only.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Wed, 25 Feb 2015 14:10:53 +0000 (15:10 +0100)]
virNetworkObjIsDuplicate: s/@doms/@nets/
This is probably a copy-paste error from virDomainObj*
counterpart. But when speaking of virNetworkObj we should use
variable @nets for an array of networks, rather than @doms. It's
just confusing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Wed, 25 Feb 2015 16:46:45 +0000 (17:46 +0100)]
testNetworkUpdate: Unlock network at the end
Silly this bug went unnoticed so long. At the beginning we try to
find the passed network in the list of network objects. If found,
it's locked and real work takes place. Then, in the end, the
network object is never unlocked.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Mon, 23 Feb 2015 18:00:57 +0000 (19:00 +0100)]
bridge_driver: Don't check network active unlocked
Okay, this is mainly for educational purposes since is called
from single point only with all the possible locks held. So
there's no way for other thread to hop in and do something wrong.
Nevertheless, we should not give bad example.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Mon, 23 Feb 2015 14:05:44 +0000 (15:05 +0100)]
networkLookupByUUID: Improve error message
We have this function networkObjFromNetwork() which for given
virNetworkPtr tries to find corresponding virNetworkObjPtr. If no
object is found, a nice error message is printed out:
no network with matching uuid '$uuid' ($name)
Let's improve the error message produced by networkLookupByUUID to
follow that logic.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So, libvirt uses pid file to track pid of started qemus. Whenever
a domain is started, its pid is put into corresponding pid file.
The pid file path is generated based on domain name and stored
into domain object internals. However, it's not stored in the
status XML and therefore lost on daemon restarts. Hence, later,
when domain is being shut down, the daemon does not know which
pid file to unlink, and the correct pid file is left behind. To
avoid this, lets generate the pid file path again in
qemuProcessReconnect().
Reported-by: Luyao Huang <lhuang@redhat.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Pavel Hrdina [Fri, 27 Feb 2015 14:07:03 +0000 (15:07 +0100)]
qemu: check defaultMode for spice graphics independently
Instead of checking defaultMode for every channel that has no mode
configured, test it only once outside of channel loop. This fixes a bug
that in case all possible channels are fore example set to insecure, but
defaultMode is set to secure, we wouldn't auto-generate TLS port. This
results in failure while starting a guest.
Pavel Hrdina [Fri, 27 Feb 2015 13:28:53 +0000 (14:28 +0100)]
qemu: remove duplicated code for allocating spice ports
We have two different places that needs to be updated while touching
code for allocation spice ports. Add a bool option to
'qemuProcessSPICEAllocatePorts' function to switch between true and fake
allocation so we can use this function also in qemu_driver to generate
native domain definition.
Peter Krempa [Mon, 2 Mar 2015 16:21:23 +0000 (17:21 +0100)]
schema: Fix interface link state schema
In commit edd1295e1da6bfe8e4e257e5fbfad71ac0bf7c87 I've introduced an
XML element that allows to configure state of the network interface
link. Somehow the RNG schema hunk ended up in a weird place in the
network schema definition. Move it to the right place and add a test
case.
Note that the link state is set up via the monitor at VM startup so I
originally didn't think of adding a test case.
Since adding the support for scheduler policy settings in commit 8680ea97, there are two enums with the same information. That was
caused by rewriting the patch since first draft.
Find out thanks to clang, but there was no impact whatsoever.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The problem here was that when opening a channel, we were checking
whether the channel given is alias (can't be NULL for running domain) or
it's name, which can be NULL (for example with spicevmc). In case of
such domain qemuDomainOpenChannel() made the daemon crash.
STREQ_NULLABLE() is safe to use since the code in question is wrapped in
"if (name)" and is more readable, so use that instead of checking for
non-NULL "vm->def->channels[i]->target.name".
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Add to the man page a more complete description of what exactly the
command expects on input and will return on output based on what is
currently supported.
Perhaps missing findPoolSources implementations are backends for
sheepdog and rbd. Also missing any backend is zfs.
John Ferlan [Wed, 25 Feb 2015 22:31:55 +0000 (17:31 -0500)]
iscsi: Adjust error message for findStorageSources backend
The virStorageBackendISCSIFindPoolSources API only needs the 'host' name
in order to discover iSCSI pools, it returns the various device paths.
On input, it's also possible to further restrict a search by providing the
port attribute for the host element and the (undocumented) initiator element.
For example:
$ virsh find-storage-pool-sources-as iscsi
error: Failed to find any iscsi pool sources
error: invalid argument: hostname and device path must be specified for iscsi sources
Modify the virsh man page to more accurately describe which values are
set by the virsh setmem and displayed by the virsh memtune or dominfo
based on the setmem command results.
According to the formatstorage.html description for <source> element
and "format" attribute: "All drivers are required to have a default
value for this, so it is optional."
As it turns out the disk backend did not choose a default value, so I
added a default of "msdos" if the source type is "unknown" as well as
updating the storage.html backend disk volume driver documentation to
indicate the default format is dos.
This patch resolves a situation where the same "<target dev='$name'...>"
can be used for multiple disks in the domain.
While the $name is "mostly" advisory regarding the expected order that
the disk is added to the domain and not guaranteed to map to the device
name in the guest OS, it still should be unique enough such that other
domblk* type operations can be performed.
Without the patch, the domblklist will list the same Target twice:
Additionally, getting domblkstat, domblkerror, domblkinfo, and other block*
type calls will not be able to reference the second target.
Fortunately, hotplug disallows adding a "third" sda value:
$ qemu-img create -f raw /var/lib/libvirt/images/file2.img 10M
$ virsh attach-disk $dom /var/lib/libvirt/images/file2.img sda
error: Failed to attach disk
error: operation failed: target sda already exists
$
BUT, it since 'sdb' doesn't exist one would get the following on the same
hotplug attempt, but changing to use 'sdb' instead of 'sda'
$ virsh attach-disk $dom /var/lib/libvirt/images/file2.img sdb
error: Failed to attach disk
error: internal error: unable to execute QEMU command 'device_add': Duplicate ID 'scsi0-0-1' for device
$
Since we cannot fix this issue at parsing time, the best that can be done so
as to not "lose" a domain is to make the check prior to starting the guest
with the results as follows:
$ virsh start $dom
error: Failed to start domain $dom
error: XML error: target 'sda' duplicated for disk sources '/var/lib/libvirt/images/file.qcow2' and '/var/lib/libvirt/images/file.img'
$
Running 'make check' found a few more instances in the tests where this
duplicated target dev value was being used. These also exhibited some
duplicated 'id=' values (negating the uniqueness argument of aliases) in
the corresponding .args file and of course the *xmlout version of a few
input XML files.
Peter Krempa [Tue, 17 Feb 2015 15:53:25 +0000 (16:53 +0100)]
qemu: Forbid setting maximum memory size with the API with NUMA enabled
NUMA enabled guest configuration explicitly specifies memory sizes for
individual nodes. Allowing the virDomainSetMemoryFlags API (and friends)
to change the total doesn't make sense as the individual node configs
are not updated in that case.
Erik Skultety [Fri, 27 Feb 2015 11:45:57 +0000 (12:45 +0100)]
docs: add a note that attr 'managed' is only used by PCI devices
Our documentation isn't 100% clear about hostdev 'managed' attribute usage,
because it only makes sense to use it with PCI devices, yet we format
this attribute to all hostdev devices. By adding a note into the docs,
we can possibly avoid confusion from customer's side and also avoid a solution
using ternary logic.
Ján Tomko [Tue, 17 Feb 2015 15:55:59 +0000 (16:55 +0100)]
Allow omitting volume capacity when backing store is specified
Add VIR_VOL_XML_PARSE_OPT_CAPACITY flag to virStorageVolDefParseXML.
With this flag, no error is reported when the capacity is missing
if there is a backing store.
Ján Tomko [Wed, 18 Feb 2015 16:25:10 +0000 (17:25 +0100)]
Make -boot arg generation more readable
If we combine the boot order on the command line with other
boot options, we prepend order= in front of it.
Instead of checking if the number of added arguments is between
0 and 2, separate the strings for boot order and options
and prepend boot order only if both strings are not empty.
Michal Privoznik [Fri, 27 Feb 2015 15:11:25 +0000 (16:11 +0100)]
docs: Add mist.io as libvirt-based application
As reported on the libvirt-users list [1], there's new web
application called mist.io which uses libvirt as one of its
backends. Lets add it into our list of libivrt based
applications.
Ján Tomko [Thu, 26 Feb 2015 13:33:26 +0000 (14:33 +0100)]
Ignore listen attribute of <graphics> for type network listens
Commit 6992994 started filling the listen attribute
of the parent <graphics> elements from type='network' listens.
When this XML is passed to UpdateDevice, parsing fails:
XML error: graphics listen attribute 10.20.30.40 must match
address attribute of first listen element (found none)
Ignore the address in the parent <graphics> attribute
when no type='address' listens are found,
the same we ignore the address for the <listen> subelements
when parsing inactive XML.
Peter Krempa [Thu, 26 Feb 2015 09:35:47 +0000 (10:35 +0100)]
util: storage: Fix error type in virStorageSourceParseBackingURI
The gluster volume name extraction code was copied from the XML parser
without changing the VIR_ERR_XML_ERROR error code. Use
VIR_ERR_CONFIG_UNSUPPORTED instead.
Peter Krempa [Thu, 26 Feb 2015 09:28:21 +0000 (10:28 +0100)]
util: storagefile: Don't crash on gluster URIs without path
Similar to commit fdb80ed4f6563928b9942a0d1450e0c725aa6c06 libvirtd
would crash if a gluster URI without path would be used in the backing
chain of a volume. The crash happens in the gluster specific part of the
parser that extracts the gluster volume name from the path.
Fix the crash by checking that the PATH is NULL.
This patch does not contain a test case as it's not possible to test it
with the current infrastructure as the test suite would attempt to
contact the gluster server in the URI. I'm working on the test suite
addition but that will be post-release material.
Laine Stump [Fri, 20 Feb 2015 19:52:37 +0000 (14:52 -0500)]
qemu: fix ifindex array reported to systemd
Commit f7afeddc added code to report to systemd an array of interface
indexes for all tap devices used by a guest. Unfortunately it not only
didn't add code to report the ifindexes for macvtap interfaces
(interface type='direct') or the tap devices used by type='ethernet',
it ended up sending "-1" as the ifindex for each macvtap or hostdev
interface. This resulted in a failure to start any domain that had a
macvtap or hostdev interface (or actually any type other than
"network" or "bridge").
This patch does the following with the nicindexes array:
1) Modify qemuBuildInterfaceCommandLine() to only fill in the
nicindexes array if given a non-NULL pointer to an array (and modifies
the test jig calls to the function to send NULL). This is because
there are tests in the test suite that have type='ethernet' and still
have an ifname specified, but that device of course doesn't actually
exist on the test system, so attempts to call virNetDevGetIndex() will
fail.
2) Even then, only add an entry to the nicindexes array for
appropriate types, and to do so for all appropriate types ("network",
"bridge", and "direct"), but only if the ifname is known (since that
is required to call virNetDevGetIndex().
Laine Stump [Tue, 24 Feb 2015 18:17:24 +0000 (13:17 -0500)]
util: check for null ifname inside virNetDevBandwidthSet()
Previously this function relied on having ATTRIBUTE_NONNULL(1) in its
prototype rather than explicitly checking for a null
ifname. Unfortunately, ATTRIBUTE_NONNULL is just a hint to the
optimizer and code analyzers like Coverity, it doesn't actually check
anything at execution time, so the result was possible warnings from
Coverity, along with the possibility of null dereferences when ifname
wasn't available.
This patch removes the ATTRIBUTE_NONNULL from the prototype, and
checks ifname inside the function, logging an error if it's NULL (once
we've determined that the user really is trying to set a bandwidth).
Laine Stump [Tue, 24 Feb 2015 17:12:56 +0000 (12:12 -0500)]
network: only clear bandwidth if it has been set
libvirt was unconditionally calling virNetDevBandwidthClear() for
every interface (and network bridge) of a type that supported
bandwidth, whether it actually had anything set or not. This doesn't
hurt anything (unless ifname == NULL!), but is wasteful.
This patch makes sure that all calls to virNetDevBandwidthClear() are
qualified by checking that the interface really had some bandwidth
setup done, and checks for a null ifname inside
virNetDevBandwidthClear(), silently returning success if it is null
(as well as removing the ATTRIBUTE_NONNULL from that function's
prototype, since we can't guarantee that it is never null,
e.g. sometimes a type='ethernet' interface has no ifname as it is
provided on the fly by qemu).
Peter Krempa [Wed, 25 Feb 2015 10:19:15 +0000 (11:19 +0100)]
schema: Allow interleaving the /domain/os/type element
The element wasn't declared under the interleave thus it was required
always to be first. This made it inconvenient when pasting new stuff to
the XML manually in the "wrong" place.
The "virtio-mmio" is perfectly valid address type which we parse and
format correctly, but it's missing in our RNG schemas, hence editing a
domain with device having such address fails the validation.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Soo. you've successfully started yourself a domain. And since you want
to use it on your host exclusively you are confident enough to
passthrough the host CPU model, like this:
<cpu mode='host-passthrough'/>
Then, after a while, you want to save the domain into a file (e.g.
virsh save dom dom.save). And here comes the trouble. The file consist
of two parts: Libvirt header (containing domain XML among other
things), and qemu migration data. Now, the domain XML in the header is
formatted using special flags (VIR_DOMAIN_XML_SECURE |
VIR_DOMAIN_XML_UPDATE_CPU | VIR_DOMAIN_XML_INACTIVE |
VIR_DOMAIN_XML_MIGRATABLE).
Then, on your way back from the bar, you think of changing something
in the XML in the saved file (we have a command for it after all), say
listen address for graphics console. So you successfully type in the
command:
virsh save-image-edit dom.save
Change all the bits, and exit the editor. But instead of success
you're left with sad error message:
error: unsupported configuration: Target CPU model <null> does not
match source Pentium Pro
Sigh. Digging into the code you see lines, where we check for ABI
stability. The new XML you've produced is compared with the old one
from the saved file to see if qemu ABI will break or not. Wait, what?
We are using different flags to parse the XML you've provided so we
were just lucky it worked in some cases? Yep, that's right.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Wed, 18 Feb 2015 17:06:44 +0000 (18:06 +0100)]
virCPUDefFormatBufFull: Use our general error handling pattern
Well, so far there are no variables to free, no cleanup work needed on
an error, so bare 'return -1;' after each error is just okay. But this
will change in a while.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
With one exception: there's no re-indentation applied to @buf1.
The idea is, that in general both can have different indentation
(like the test I'm adding proves)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Pavel Hrdina [Tue, 24 Feb 2015 13:31:37 +0000 (14:31 +0100)]
qemu: fix memory leak while starting a guest
In commit cc41c648 I've re-factored qemuMonitorFindBalloonObjectPath, but
missed that there is a memory leak. The "nextpath" variable is
overwritten while looping in for cycle and we have to free it before next
cycle.
While the restriction doesn't have origin in any RFC, it matters
to us while constructing the dnsmasq config file (or command line
previously). For better picture, this is how the corresponding
part of network XML look like:
Prevent default creation of usb controller on s390 and s390x
Since s390 does not support usb the default creation of a usb controller
for a domain should not occur.
Also adjust s390 test cases by removing usb device instances since
usb devices are no longer created by default for s390 the s390
test cases need to be adjusted.
Signed-off-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com> Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Daniel Hansel [Wed, 18 Feb 2015 13:53:32 +0000 (14:53 +0100)]
man: moved virsh command cpu-models
The description of the virsh command 'cpu-models' was written in the
wrong context (i.e. beside the domain states).
This patch moves the command description just to the cpu related
commands like 'cpu-baseline' and 'cpu-compare'.
Signed-off-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Michal Privoznik [Wed, 18 Feb 2015 10:59:22 +0000 (11:59 +0100)]
libvirt-guests: Allow time sync on guests resume
Well, imagine domains were running, and as the host went down, they
were managesaved. Later, after some time, the host went up again and
domains got restored. But without correct time. And depending on how
long was the host shut off, it may take some time for ntp to sync the
time too. But hey, wait a minute. We have an API just for that! So:
1) Introduce SYNC_TIME variable in libvirt-guests.sysconf to allow
users control over the new functionality
2) Call 'virsh domtime --sync $dom' in the libvirt-guests script.
Unfortunately, this is all-or-nothing approach (just like anything
else with the script). Domains are required to have configured and
running qemu-ga inside.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
libxl: support backend domain setting for disk and net devices
This implement handling of <backenddomain name=''/> parameter introduced
in previous patch.
Works on Xen >= 4.3, because only there libxl supports setting backend
domain by name. Specifying backend domain by ID or UUID is currently not
supported.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
conf: support backend domain name in disk and network devices
At least Xen supports backend drivers in another domain (aka "driver
domain"). This patch introduces an XML config option for specifying the
backend domain name for <disk> and <interface> devices. E.g.
Laine Stump [Sun, 15 Feb 2015 03:43:16 +0000 (22:43 -0500)]
network: allow <pf> together with <interface>/<address> in network status
The function that parses the <forward> subelement of a network used to
fail/log an error if the network definition contained both a <pf>
element as well as at least one <interface> or <address> element. That
check was present because the configuration of a network should have
either one <pf>, one or more <interface>, or one or more <address>,
but never combinations of multiple kinds.
This caused a problem when libvirtd was restarted with a network
already active - when a network with a <pf> element is started, the
referenced PF (Physical Function of an SRIOV-capable network card) is
checked for VFs (Virtual Functions), and the <forward> is filled in
with a list of all VFs for that PF either in the form of their PCI
addresses (a list of <address>) or their netdev names (a list of
<interface>); the <pf> element is not removed though. When libvirtd is
restarted, it parses the network status and finds both the original
<pf> from the config, as well as the list of either <address> or
<interface>, fails the parse, and the network is not added to the
active list. This failure is often obscured because the network is
marked as autostart so libvirt immediately restarts it.
It seems odd to me that <interface> and <address> are stored in the
same array rather than keeping two separate arrays, and having
separate arrays would have made the check much simpler. However,
changing to use two separate arrays would have required changes in
more places, potentially creating more conflicts and (more
importantly) more possible regressions in the event of a backport, so
I chose to keep the existing data structure in order to localize the
change.
It appears that this problem has been in the code ever since support
for <pf> was added (0.9.10), but until commit 34cc3b2f106e296df5e64309620c79d16fd76c85 (first in libvirt 1.2.4)
networks with interface pools were not properly marked as active on
restart anyway, so there is no point in backporting this patch any
further than that.
Peter Krempa [Tue, 10 Feb 2015 16:11:40 +0000 (17:11 +0100)]
conf: Hoist validation of memory size into the post parse callback
Later patches will need to access the full definition to do check the
memory size and thus the checking needs to be done after the whole
definition including devices is known.
Peter Krempa [Mon, 16 Feb 2015 16:28:48 +0000 (17:28 +0100)]
conf: Move all NUMA configuration to virDomainNuma
For historical reasons data regarding NUMA configuration were split
between the CPU definition and numatune. We cannot do anything about the
XML still being split, but we certainly can at least store the relevant
data in one place.
This patch moves the NUMA stuff to the right place.
projects / libvirt.git / log