Laine Stump [Mon, 26 Aug 2019 05:51:40 +0000 (01:51 -0400)]
util: make a couple virNetDevMacVlan*() functions public
In virNetDevMacVLanOpen(), The "retries" arg has been removed and the
value hardcoded as 10, since previously the function was only called
from one place, so it was always 10.
Signed-off-by: Laine Stump <laine@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Laine Stump [Mon, 26 Aug 2019 05:24:08 +0000 (01:24 -0400)]
util: new function virNetDevMacVLanIsMacvtap()
This function returns T if the given name is a macvtap device. This is
determined by 1) getting the ifindex of the device with that name (if
there is one), and 2) checking for existence of /dev/tapXX, where "XX"
is the ifindex learned in (1).
It's also possible to learn this by getting a netlink dump of the
interface and parsing through it to look for some attributes, but that
is complicated to figure out, takes longer to execute, and I'm lazy.
Signed-off-by: Laine Stump <laine@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
tests: Add a baseline test for multifunction pci device use case
There are already good number of test cases with hostdevices,
few have multifunction devices but none having more than one
than one multifunction cards.
This patch adds a case where there are two multifunction cards
and two Virtual functions part of the same XML.
0001:01:00.X & 0005:09:00.X - are Multifunction PCI cards.
0000:06:12.[5|6] - are SRIOV Virtual functions
Future commits will improve on automatically detecting the
multifunction cards and auto-assinging the addresses
appropriately.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Previous patch had to add '/sys/kernel/' prefix in opendir() because
the path, which is being mocked, wasn't being considered due to
an 'if SYSFS_PCI_PREFIX' guarding the call to getrealpath().
In fact, all current getrealpath() callers are guarding it with a
conditional to ensure that the function will never be called with
a non-mocked path. In this case, an extra non-NULL verification is
needed for the 'newpath' string to use the variable - which is
counterintuitive, given that getrealpath() will always write the
'newpath' string in any non-error conditon.
However, simply removing the guard of all getrealpath() instances
causes an abort in init_env(). This happens because tests will
execute access() to non-mocked paths even before the
LIBVIRT_FAKE_ROOT_DIR variable is declared in the test files. We
don't need 'fakerootdir' to be created at this point though.
This patch does the following changes to simplify getrealpath()
usage:
- getrealpath() will now guard the init_env() call by checking if
both fakeroot isn't created and the required path is being mocked.
This ensures that we're not failing inside init_env() because
we're too early and LIBVIRT_FAKE_ROOT_DIR wasn't defined yet;
- remove all conditional guards to call getrealpath() from
access(), virMockStatRedirect(), open(), open_2(), opendir()
and virFileCanonicalizePath(). As a bonus, remove all ternary
conditionals with 'newpath';
- a new 'pathPrefixIsMocked()' helper to aggregate all the prefixes
we're mocking, making it easier to add/remove them. If a prefix
is added inside this function, we can be sure that all functions
are mocking them.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds hostdev test cases in qemuhotplugtest.c.
Note: the small tweak inside virpcimock.c was needed because
the new tests added a code path in which virHostHasIOMMU()
(virutil.c) started being called, and the mocked '/sys/kernel/'
prefix that is mocked in virpcimock.c wasn't being considered
in the opendir() mock. An alternative to avoid these situations
in virpcimock.c is implemented in the next patch.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The softlink to physfn is the way to know if the device is
VF or not. So, the patch softlinks 'physfn' to the parent function.
The multifunction PCI devices dont have 'physfn' softlinks.
The patch adds few Virtual functions to the mock environment and
changes the existing VFIO test xmls using the VFs to use the newly
added VFs for their use case.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds mock of the /dev/vfio path, needed for proper
implementation of the support for multifunction/multiple devices
per iommu groups.
To do that, the existing bind and unbind operations were adapted
to operate with the mocked filesystem as well.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Eric Farman [Tue, 3 Sep 2019 20:09:48 +0000 (22:09 +0200)]
qemu: Adjust max memlock on mdev hotplug
When starting a domain, we use the presence of a vfio-pci or
mdev hostdev to determine if the memlock maximum needs to be
increased. But if we hotplug either of these devices, only the
vfio-pci path gets that love. This means that attaching a, say,
vfio-ccw device will appear to succeed but the device may be
unusable as the guest may see I/O errors on long CCW chains.
The host, meanwhile, would be flooded with these messages:
Let's adjust the maximum memlock value in the mdev hotplug path,
so that the domain has the same value as if it were started with
one or more mdev devices in its configuration.
Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Eric Farman [Tue, 3 Sep 2019 20:09:47 +0000 (22:09 +0200)]
qemu: Reset the maximum locked memory on hotplug fail
If attaching a PCI hostdev fails, there are several things that
need to be un-done as part of the cleanup. One thing that is
not done is re-calculating/re-setting the maximum amount of locked
memory for the domain, since we may have changed that.
Let's fix that, just to ensure everything is back the way it was.
Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Eric Farman [Tue, 3 Sep 2019 20:09:46 +0000 (22:09 +0200)]
qemu: Refactor the max memlock routine
Let's pull this hunk out into a function, so it can be reused
in another codepath that needs to do the same thing.
Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
In f08e6883cb4 I've made @pcidevs in
virHostdevReAttachPCIDevices() to be automatically unrefed using
VIR_AUTOUNREF() but I forgot to remove the line that explicitly
unrefs the object at the end of the function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We currently generate two completely separate API references for the
libvirt public API. One at 'docs/html/' and one at 'docs/devhelp/'.
Both are published on the website, but we only link to content in
the 'docs/html/' pages.
Both are installed in the libvirt-docs sub-RPM, with a full copy
of the website including 'docs/html/' in /usr/share/docs/libvirt-docs,
while the 'docs/devhelp/' content goes to /usr/share/gtk-doc/. The
latter was broken for years until:
Our XSLT magic generates one Devhelp-compatible HTML file
per documentation module, but so far we have only shipped
and installed documentation for virterror.
Now that we have $(modules), however, we can generate the
list of files the same way we do for regular documentation
and make sure we always ship and install everything.
That this bug went unnoticed for so long is a sign of how few
people are using the devhelp docs. The only commits to the devhelp
code since it was first introduced have been fixing various build
problems that hit.
The only obvious difference between the two sets of docs is the CSS
styling in use. Overall devhelp does not look compelling enough to
justify having two duplicated sets of API docs. Eliminating it will
reduce the amount of XSL code we are carrying in the tree which is
an attractive benefit.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
After the previous commits, qemuAddSharedDevice() and
qemuRemoveSharedDevice() are now the same code with a different
flag to call the internal functions.
This patch aggregates the common code into a new function called
qemuAddRemoveSharedDeviceInternal() to further reduce
code repetition. Both qemuAddSharedDevice() and
qemuRemoveSharedDevice() are kept since they are public
functions used elsewhere.
No functional change was made.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Following the same idea of avoid code repetition from the
previous patch, this commit introduces a new function that
aggregates the functions of qemuAddSharedDisk() and
qemuRemoveSharedDisk() into a single place, using a flag to
switch between add/remove operations.
Both qemuAddSharedDisk() and qemuRemoveSharedDisk() are
public, so keep them around to avoid changing other files
due to an internal qemu_conf.c refactory.
No functional change was made.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
remote: stop trying to print help as giant blocks of text
The socket path built would be libvirt//var/run/libvirt-sock
instead of /var/run/libvirt/libvirt-sock. Fortunately this only
affects users who have set the 'unix_sock_dir' config parameter
in /etc/libvirt/libvirtd.conf, which is pretty rare/unusual.
Signed-off-by: eater <=@eater.me>
Exception made for the psuedonym above since patch is considered
trivial & thus non-copyrightable material.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
lib: Grab write lock when modifying list of domains
In some places where virDomainObjListForEach() is called the
passed callback calls virDomainObjListRemoveLocked(). Well, this
is unsafe, because the former only grabs a read lock but the
latter modifies the list.
I've identified the following unsafe calls:
libxl: Fix libxlDomainPMSuspendForDuration domain active check
virDomainObjCheckActive() returns -1 if domain is not active, not 0.
Fixes cb50436c6f "libxl: implement virDomainPM* functions" Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Julio Faracco [Mon, 2 Sep 2019 17:00:27 +0000 (14:00 -0300)]
util: Set backing file name for LOOP_GET_STATUS64 queries.
This is an issue for LXC loop devices when you are trying to get loop
devices info using `ioctl`. Modern apps uses `/sys/dev/block` to grab
information about devices, but if you use the method mention you won't
be able to retrive the associated file with that loop device. See
example below from cryptsetup sources:
It will return an empty string because lo_file_name was not set.
Function `virFileLoopDeviceOpenSearch()` is using `ioctl` to query data,
but it is not checking `lo_file_name` field.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
When the network interface is of "user" type, and QEMU has the "-net
socket,fd=" datagram support, call qemuInterfacePrepareSlirp() to
probe and associate a slirp-helper with the interface.
The usage of automated slirp-helper can be prevented with
disableSlirp (in particular when resuming a
VM that didn't start with slirp-helper before).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemu-command: use -net socket, fd= with slirp-helper
If a slirp-helper is associated with a network interface (after
probing & preparing succesfully), pass the socket fd to QEMU and use
"-net socket,fd=".
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The unit provides the functions associated with a slirp-helper:
- probing / checking capabilities
- opening the socketpair
- starting / stoping the helper
- registering for dbus-vmstate migration
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
A slirp helper is a process that provides user-mode networking through
a unix domain socket. It is expected to follow the following
specification:
https://gitlab.freedesktop.org/slirp/libslirp-rs/blob/master/src/bin/README.rst
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add dbusVMStates to keep a list of dbus-vmstate objects needed for
migration. They are populated on the command line during start or
qemuDBusVMStateAdd/Remove() will hotplug them as needed.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
pid filenames (from swtpm and other helpers from this series) are
based on VM shortname, which is derived from VM id. If the id is reset
to early, the state filenames will not be found.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemu: replace logCtxt with qemuDomainLogAppendMessage()
Once QEMU is started, the qemuDomainLogContext is owned by it, and can
no longer be used from libvirt. Instead, use
qemuDomainLogAppendMessage() which will redirect the log.
This is not strictly necessary for swtpm, but the following patches
are going to reuse qemuExtDeviceLogCommand().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Peter Krempa [Mon, 12 Aug 2019 16:31:44 +0000 (18:31 +0200)]
qemu: qapi: Limit traversal depth for QAPI schema queries
Implicitly the query depth is limited by the length of the QAPI schema
query, but 'alternate' and 'array' QAPI meta-types don't consume a part
of the query string thus a loop on such types would get our traversal
code stuck in an infinite loop. Prevent this from happening by limiting
the nesting depth to 1000.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
After parsing a video device with a model type of
VIR_DOMAIN_VIDEO_TYPE_NONE, all device info is cleared (see
virDomainDefPostParseVideo()) in order to avoid formatting any
auto-generated values for the XML. Subsequently, however, an alias is
generated for the video device (e.g. 'video0'), which results in an
alias property being formatted in the XML output anyway. This creates
confusion if the user has explicitly provided an alias for the video
device since the alias will change.
To avoid this, don't clear the user-defined alias for video devices of
type "none".
Pavel Hrdina [Thu, 5 Sep 2019 09:22:11 +0000 (11:22 +0200)]
vircgroupv2: fix setting cpu.max period
When we set cpu.max period we need to parse the cpu.max file first as
it contains both quota and period values separated by space. When only
a single number is written to that file it will set quota. However,
in order to change period we need to write both values.
The code was prepared for that but mistakenly used new line to end the
string with the first value.
Peter Krempa [Tue, 13 Aug 2019 11:37:17 +0000 (13:37 +0200)]
qemu: Defer support checks for external active snapshots to blockdev code or qemu
Remove libvirt's support check for the target of an external snapshot to
the blockdev code or qemu. This will potentially require a more complex
cleanup but removes a level of hardcoded feature checks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Tue, 13 Aug 2019 10:23:00 +0000 (12:23 +0200)]
qemu: snapshot: Skip overlay file creation/interogation if unsupported
With blockdev we'll be able to support protocols which are not supported
by the storage backends in libvirt. This means that we have to be able
to skip the creation and relative storage path reading if it's not
supported. This will make it impossible to use relative backing for
network protocols but that would be almost insane anyways.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
After we always assume support for the 'transaction' command
(c358adc57113b) and follow-up cleanups
qemuDomainSnapshotCreateSingleDiskActive lost its value. Move the code
into appropriate helpers and remove the function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Wed, 28 Aug 2019 07:31:28 +0000 (09:31 +0200)]
qemu: snapshot: Save status and config XMLs only on success
We changed to always saving the status and config XMLs to simplify
code. After a few more refactors it's now possible to move it to the
appropriate place and save the XMLs only on success again.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Wed, 28 Aug 2019 07:30:33 +0000 (09:30 +0200)]
qemu: snapshot: Fix image lock handling when taking a snapshot
When we take a snapshot we must properly remove our locking
infrastructure locks. This was broken by commit 3817fa10c4ad9 which
attempted to properly track the readonly state for the image as the
locking code was executed after this change. Since we forced the image
which was locked as read-write to read-only prior to unlocking it the
write lock was not dropped.
Fix it by moving the locking code prior to modifying the readonly flag.
Peter Krempa [Tue, 3 Sep 2019 12:26:20 +0000 (14:26 +0200)]
qemu: driver: Fix shallow non-reuse block copy
The code preparing data for creating/attaching the target image of block
copy didn't use the correct reference to the existing backing chain in
case when the copy should inherit it. This meant that qemu actually
opened a second copy of the chain and operated on that.
This would de-sync qemu from libvirt's view of node names. Luckily this
is only hypothetical at this point since it happens only when -blockdev
is enabled.
Fix it by passing 'mirrorBacking' which has the proper data as the
backing store when calling
qemuBuildStorageSourceChainAttachPrepareBlockdevTop.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Tue, 3 Sep 2019 12:22:41 +0000 (14:22 +0200)]
qemu: Explicitly pass backing store to qemuBuildStorageSourceChainAttachPrepareBlockdevTop
In some cases we'll need to pass in a backing store which is not
recorded as the backing store of @src. Export backingStore as variable
and fix all callers to pass in the backing store. No semantic changes
for now.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extract the loop and supporting infrastructure to the caller as only one
of the two callers actually cares about looping and rename the helper to
qemuBuildStorageSourceChainAttachPrepareBlockdevOne.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Wed, 4 Sep 2019 14:58:08 +0000 (16:58 +0200)]
qemu: Prevent storage causing too much nested XML
Since libvirt stores the backing chain into the XML in a nested way it
is the prime possibility to hit libxml2's parsing limit of 256 layers.
Introduce code which will crawl the backing chain and verify that it's
not too deep. The maximum nesting is set to 200 layers so that there's
still some space left for additional properties or nesting into snapshot
XMLs.
The check is applied to all disk use cases (starting, hotplug, media
change) as well as block copy which changes image and snapshots.
We simply report an error and refuse the operation.
Without this check a restart of libvirtd would result in the status XML
failing to be parsed and thus losing the VM.
When virtlogd is used to capture QEMU's stdout, qemuDomainObjTaint would
always fail to write the message to the log file when QEMU is already
running (i.e., outside qemuProcessLaunch). This can happen during device
hotplug or by sending a custom QEMU guest agent command:
warning : qemuDomainObjTaint:8757 : Domain id=9 name='blaf'
uuid=9cfa4e37-2930-405b-bcb4-faac1829dad8 is tainted:
custom-ga-command
error : virLogHandlerDomainOpenLogFile:388 : Cannot open log file:
'/var/log/libvirt/qemu/blaf.log': Device or resource busy
error : virNetClientProgramDispatchError:172 : Cannot open log file:
'/var/log/libvirt/qemu/blaf.log': Device or resource busy
The fix is easy, we just need to use the right API for appending a
message to QEMU log file instead of creating a new log context.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Fri, 30 Aug 2019 14:33:48 +0000 (16:33 +0200)]
qemu: block: Use correct type when creating image size JSON entries
The 'u' modifier creates an unsigned int JSON attribute but the disk size
and capacity fields are unsigned long long. If the size of the created
image would be more than 4GiB we'd overflow and create sub-4G image.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Jim Fehlig [Tue, 3 Sep 2019 04:24:00 +0000 (22:24 -0600)]
xenapi: remove driver
The xenapi driver has not seen any development since its initial
contribution 9 years ago. There have been no bug reports, no patches,
and no queries about the driver on the developer or user mailing lists.
Remove the driver from the libvirt sources.
Signed-off-by: Jim Fehlig <jfehlig@suse.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Peter Krempa [Mon, 2 Sep 2019 14:11:46 +0000 (16:11 +0200)]
qemu: domain: Fix potential NULL deref when parsing job private data
A specially crafted XML which would reference a non-existing disk but
request the mirror to be registered with the blockjob could potentially
make the parser dereference NULL. Fix it by moving the code slightly and
just treat it as a wrong job XML. Found by Coverity.
Reported-by: John Ferlan <jferlan@redhat.com> Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Erik Skultety <eskultet@redhat.com> Reviewed-by: John Ferlan <jferlan@redhat.com>
The (pre-copy) bandwidth was historically the only bandwidth we
supported and thus it is called just "bandwidth" in all other places.
E.g., virsh migrate-setspeed or in the migration typed parameter name.
Let's make the new option for virsh migrate consistent.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The (pre-copy) bandwidth was historically the only bandwidth we
supported and thus it is called just "bandwidth" in all other places.
E.g., virsh migrate-setspeed or in the migration typed parameter name.
Let's make the new option for virsh migrate consistent.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Michal Privoznik [Fri, 30 Aug 2019 12:34:12 +0000 (14:34 +0200)]
qemu_blockjob: Remove secdriver metadata more frequently
If a block job reaches failed/cancelled state, or is completed
without pivot then we must remove security driver metadata
associated to the backing chain so that we don't leave any
metadata behind.
Michal Privoznik [Fri, 30 Aug 2019 13:07:48 +0000 (15:07 +0200)]
qemu_blockjob: Print image path on failed security metadata move too
When a block job is completed, the security image metadata are
moved to the new image. If this fails an warning is printed, but
the message contains only domain name and lacks image paths. Put
them both into the warning message.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> ACKed-by: Peter Krempa <pkrempa@redhat.com>
Michal Privoznik [Fri, 30 Aug 2019 12:21:24 +0000 (14:21 +0200)]
qemu_blockjob: Move active commit failed state handling into a function
Currently, there are only a few lines of code so a separate
function was not necessary, but this will change. So instead of
putting all the new code under 'case
QEMU_BLOCKJOB_TYPE_ACTIVE_COMMIT' create a separate function.
Just like every other case has one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> ACKed-by: Peter Krempa <pkrempa@redhat.com>
selinux: Do not report an error when not returning -1
I guess the reason for that was the automatic interpretation/stringification of
setfilecon_errno, but the code was not nice to read and it was a bit confusing.
Also, the logs and error states get cleaner this way.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
'virQEMUDriverConfigPtr cfg' is declared, initiated, but never
used in virQEMUDriverCreateCapabilities().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Erik Skultety <eskultet@redhat.com> Reviewed-by: Christophe de Dinechin <dinechin@redhat.com>
Michal Privoznik [Thu, 22 Aug 2019 14:34:02 +0000 (16:34 +0200)]
security_selinux: Play nicely with network FS that only emulates SELinux
There are some network file systems that do support XATTRs (e.g.
gluster via FUSE). And they appear to support SELinux too.
However, not really. Problem is, that it is impossible to change
SELinux label of a file stored there, and yet we claim success
(rightfully - hypervisor succeeds in opening the file). But this
creates a problem for us - from XATTR bookkeeping POV, we haven't
changed the label and thus if we remembered any label, we must
roll back and remove it.
Michal Privoznik [Thu, 22 Aug 2019 08:21:11 +0000 (10:21 +0200)]
security_selinux: Drop @optional from _virSecuritySELinuxContextItem
Now, that we don't need to remember if setting context is
'optional' (the argument only made
virSecuritySELinuxSetFileconImpl() return a different success
code), we can drop it from the _virSecuritySELinuxContextItem
structure as we don't need to remember it in transactions.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Michal Privoznik [Thu, 22 Aug 2019 08:14:05 +0000 (10:14 +0200)]
security_selinux: Drop virSecuritySELinuxSetFileconOptional()
There is no real difference between
virSecuritySELinuxSetFilecon() and
virSecuritySELinuxSetFileconOptional(). Drop the latter in favour
of the former.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Michal Privoznik [Wed, 21 Aug 2019 15:50:55 +0000 (17:50 +0200)]
virSecuritySELinuxSetFileconImpl: Drop @optional argument
The only thing that the @optional argument does is that it makes
the function return 1 instead of 0 if setting SELinux context
failed in a non-critical fashion. Drop the argument then and
return 1 in that case. This enables caller to learn if SELinux
context was set or not.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
projects / libvirt.git / log