David Bright [Mon, 24 May 2021 19:02:43 +0000 (14:02 -0500)]
pciconf: Fix up pciconf -lc output
The pciconf command fails to emit newlines when particular ecap field
values are seen. Fix them up. This has been seen on several systems at
$JOB. The documentation for PCI capabilities says that capability
type 0 should not be used once the spec for PCI capabilities was
published, but that seems more wishful-thinking than reality. pciconf
also chooses not to print fields related to field values that are
zero, but it seems several of these fields are zero on actual
hardware.
The flag values seem to be the same between Linux and FreeBSD.
Comparing to a Linux VM on the same hardware, we're missing
HWCAP_EVTSTRM, HWCAP_CPUID, HWCAP_DCPOP, HWCAP_USCAT, HWCAP_PACA,
and HWCAP_PACG.
Rick Macklem [Tue, 1 Jun 2021 02:41:17 +0000 (19:41 -0700)]
nfsd: Delete extraneous NFSv4 root checks
There are several NFSv4.1/4.2 server operation functions which
have unneeded checks for the NFSv4 root being set up.
The checks are not needed because the operations always follow
a Sequence operation, which performs the check.
This patch deletes these checks, simplifying the code so
that a future patch that fixes the checks to conform with
RFC5661 Sec. 2.6 will be less extension.
Cy Schubert [Thu, 20 May 2021 21:28:17 +0000 (14:28 -0700)]
wpa: Restructure wpa build
The current WPA build assumes a flat namespace. However the latest sources
from w1.fi now have a duplicate config.c, in two separate subdirectories.
The flat namespace will overwrite config.o with the output from the most
recently modified config.c, of which there are two of them.
This commit resolves this problem by building each component in
wpa's src subdirectory tree into its own .a archive, just as the w1.fi
upstream build as used by the port does. The advantages of this approach
are:
1. Duplicate source file names, i.e. config.c in the wpa_supplicant
direcory and another config.c in src/utils in the next wpa
will result in both compiles writing to the same .o file.
2. This restructure simplifies maintanence. A develper needs only to add
new files as identified by git status in the vendor branch to the
appropriate Makefile within the usr.sbin/wpa tree. This also reduces
time required to prepare a new import and should reduce error.
3. The new wpa build structure more closely represents the build as
performed by the upstream tarball.
This is in preparation for the next wpa update from w1.fi.
Reviewed by: philip
Tested by: philip
MFC after: 2 months
Differential Revision: https://reviews.freebsd.org/D30372
Mark Johnston [Mon, 31 May 2021 22:53:34 +0000 (18:53 -0400)]
tcp, udp: Permit binding with AF_UNSPEC if the address is INADDR_ANY
Prior to commit f161d294b we only checked the sockaddr length, but now
we verify the address family as well. This breaks at least ttcp. Relax
the check to avoid breaking compatibility too much: permit AF_UNSPEC if
the address is INADDR_ANY.
Fixes: f161d294b
Reported by: Bakul Shah <bakul@iitbombay.org>
Reviewed by: tuexen
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D30539
Mark Johnston [Mon, 31 May 2021 22:51:14 +0000 (18:51 -0400)]
x86: Fix lapic_ipi_alloc() on i386
The loop which checks to see if "dynamic" IDT entries are allocated
needs to compare with the trampoline address of the reserved ISR.
Otherwise it will never succeed.
Reported by: Harry Schmalzbauer <freebsd@omnilan.de>
Tested by: Harry Schmalzbauer <freebsd@omnilan.de>
Reviewed by: kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D30576
Mark Johnston [Mon, 31 May 2021 22:49:33 +0000 (18:49 -0400)]
amd64: Avoid enabling interrupts when handling kernel mode prot faults
When PTI is enabled, we may have been on the trampoline stack when iret
faults. So, we have to switch back to the regular stack before
re-entering trap().
trap() has the somewhat strange behaviour of re-enabling interrupts when
handling certain kernel-mode execeptions. In particular, it was doing
this for exceptions raised during execution of iret. When switching
away from the trampoline stack, however, the thread must not be migrated
to a different CPU. Fix the problem by simply leaving interrupts
disabled during the window.
Paste's man page contains an example for a reimplementation of
nl(1). This example uses the command line
sed = myfile | paste -s -d '\t\n' - -
in order to concatenate consecutive lines with an intervening tab.
However, the way the example uses the switches -s and -d and two `dash`
input files is redundant. There are in fact two equivalent but simpler
ways to achieve the desired result:
sed = myfile | paste -s -d '\t\n' -
uses the same style as the previous example, while
sed = myfile | paste - -
is arguably even simpler and illustrates the final sentence of the
DESCRIPTION.
Mitchell Horne [Mon, 31 May 2021 14:24:44 +0000 (11:24 -0300)]
libpmc: make libpmc_pmu_utils.c more amenable to porting
The current version has every function stubbed out for !x86. Only two
functions (pmu_alias_get() and pmc_pmu_pmcallocate() are really platform
dependent, so reduce the width of the ifdefs and remove some of the
stubs.
Reviewed by: ray
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D30532
Mitchell Horne [Mon, 31 May 2021 14:21:57 +0000 (11:21 -0300)]
libpmc: eliminate pmc_pmu_stat_mode()
There is a single consumer, the pmc utility, that clearly has knowledge
of which counters it is expecting. Remove this function and have it
use common counter aliases instead.
Reviewed by: gnn
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D30528
J.R. Oldroyd [Mon, 31 May 2021 19:33:07 +0000 (22:33 +0300)]
iichid(4): disable interrupt on suspend
Commit message of the identical change in Linux driver says:
"When an I2C HID device is powered off during system sleep, as a result
of removing its power resources (by the ACPI core) the interrupt line
might go low as well. This results inadvertent interrupts."
This change fixes suspend/resume on Asus S510UQ laptops.
While here add a couple of typo fixes as well as a slight change to the
iichid_attach() code to have the power_on flag set properly.
- Allow firmware downloading for hw_variant #8;
- Enter manufacturer mode for setting of event mask;
- Handle multi-event response on HCI commands for 7260;
This allows to remove kludge with skipping of 0xfc2f opcode.
- Disable patch and exit manufacturer mode on downloading failure;
- Use default firmware if correct firmware file is not found;
Kristof Provost [Sat, 15 May 2021 11:45:55 +0000 (13:45 +0200)]
pf: Convenience function for optional (numeric) arguments
Add _opt() variants for the uint* functions. These functions set the
provided default value if the nvlist doesn't contain the relevant value.
This is helpful for optional values (e.g. when the API is extended to
add new fields).
While here simplify the header by also using macros to create the
prototypes for the macro-generated function implementations.
Kristof Provost [Thu, 27 May 2021 09:28:36 +0000 (11:28 +0200)]
libpfctl: fix memory leak
When we create an nvlist and insert it into another nvlist we must
remember to destroy it. The nvlist_add_nvlist() function makes a copy,
just like nvlist_add_string() makes a copy of the string.
Emmanuel Vadot [Mon, 31 May 2021 12:06:20 +0000 (14:06 +0200)]
arm64: allwinner: clk: Test with the current parent freq first
Even if the clock is flagged with AW_CLK_SET_PARENT the current parent
freq might be enough to get a correct divisor.
So test first if we can get the expected freq before changing the parent
freq.
Lutz Donnerhacke [Sat, 15 May 2021 13:24:12 +0000 (15:24 +0200)]
libalias: Remove unused function LibAliasCheckNewLink
The functionality to detect a newly created link after processing a
single packet is decoupled from the packet processing. Every new
packet is processed asynchronously and will reset the indicator, hence
the function is unusable. I made a Google search for third party code,
which uses the function, and failed to find one.
That's why the function should be removed: It unusable and unused.
A much simplified API/ABI will remain in anything below 14.
If two contexts read and modify bw_meter values
it might happen that these are corrupted.
Guard only code fragments which do read-and-modify.
Context which only do "reads" are not done inside
spinlock block. The only sideffect that can happen is
an 1-p;acket outdated value reported back to userspace.
2. replace all locks with a single RWLOCK
Multiple locks caused a performance issue in routing
hot path, when two of them had to be taken. All locks
were replaced with single RWLOCK which makes the hot
path able to take only shared access to lock most of
the times.
All configuration routines have to take exclusive lock
(as it was done before) but these operation are very rare
compared to packet routing.
3. redesign MFC expire and UPCALL expire
Use generic kthread and cv_wait/cv_signal for deferring
work. Previously, upcalls could be sent from two contexts
which complicated the design. All upcall sending is now
done in a kthread which allows hot path to work more
efficient in some rare cases.
4. replace mutex-guarded linked list with lock free buf_ring
All message and data is now passed over lockless buf_ring.
This allowed to remove some heavy locking when linked
lists were used.
Rick Macklem [Mon, 31 May 2021 00:52:43 +0000 (17:52 -0700)]
nfsd: Add support for the NFSv4.1/4.2 Secinfo_no_name operation
The Linux client is now attempting to use the Secinfo_no_name
operation for NFSv4.1/4.2 mounts. Although it does not seem to
mind the NFSERR_NOTSUPP reply, adding support for it seems
reasonable.
I also noticed that "savflag" needed to be 64bits in
nfsrvd_secinfo() since nd_flag in now 64bits, so I changed
the declaration of it there. I also added code to set "vp" NULL
after performing Secinfo/Secinfo_no_name, since these
operations consume the current FH, which is represented
by "vp" in nfsrvd_compound().
Fixing when the server replies NFSERR_WRONGSEC so that
it conforms to RFC5661 Sec. 2.6 still needs to be done
in a future commit.
Alan Somers [Sun, 30 May 2021 21:54:46 +0000 (15:54 -0600)]
[skip ci] add a CODEOWNERS file
Summary:
Convert MAINTAINERS into a Github CODEOWNERS file. This will
automatically assign reviewers to some GH pull requests. The conversion
is not 1:1; some committers don't have Github accounts (e.g. adrian),
some functional areas don't neatly correspond to a set of files (e.g.
kqueue), and mailing lists can't be assigned as a reviewer (e.g.
secteam@). But it's a start.
vinvalbuf: do not panic if we were unable to flush dirty buffers
Return EBUSY instead and let caller to handle the issue.
For vgone()/vnode reclamation, caller first does vinvalbuf(V_SAVE),
which return EBUSY in case dirty buffers where not flushed. Then caller
calls vinvalbuf(0) due to non-zero return, which gets rid of all dirty
buffers without dependencies.
PR: 238565
Reviewed by: asomers, mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D30555
VFS_QUOTACTL(9): allow implementation to indicate busy state changes
Instead of requiring all implementations of vfs_quotactl to unbusy
the mount for Q_QUOTAON and Q_QUOTAOFF, add an "mp_busy" in/out param
to VFS_QUOTACTL(9). The implementation may then indicate to the caller
whether it needed to unbusy the mount.
Also, add stbool.h to libprocstat modules which #define _KERNEL
before including sys/mount.h. Otherwise they'll pull in sys/types.h
before defining _KERNEL and therefore won't have the bool definition
they need for mp_busy.
Lutz Donnerhacke [Sun, 30 May 2021 13:41:24 +0000 (15:41 +0200)]
libalias: Fix nameing and initialization of a constant
The commit 189f8eea contains a refactorisation of a constant. During
later review D30283 the naming of the constant was improved and the
initialization became explicit. Put this into the tree, in order to
MFC the correct naming.
Parts of libprocstat like to pretend they're kernel components for the
sake of including mount.h, and including sys/types.h in the _KERNEL
case doesn't fix the build for some reason. Revert both the
VFS_QUOTACTL() change and the follow-up "fix" for now.
VFS_QUOTACTL(9): allow implementation to indicate busy state changes
Instead of requiring all implementations of vfs_quotactl to unbusy
the mount for Q_QUOTAON and Q_QUOTAOFF, add an "mp_busy" in/out param
to VFS_QUOTACTL(9). The implementation may then indicate to the caller
whether it needed to unbusy the mount.
Justin Hibbits [Mon, 10 May 2021 00:19:07 +0000 (19:19 -0500)]
Apply r350463(43ded0a321a) to powerpc64 radix pmap
Invalidate the last page of a demoted superpage mapping, instead of the
first page, as it results in slightly more promotions and fewer
failures. While here, replace 'boolean_t's with 'bool's in
mmu_radix_advise().
Justin Hibbits [Sun, 9 May 2021 16:07:28 +0000 (11:07 -0500)]
Apply r350335(5d18382b728) to powerpc64 radix pmap
Simplify pmap_clear_modify() a bit, by assuming that since the superpage
demotion succeeded, all 4k mappings from it are valid. Deindent the
surrounding code, as there are no 'else' branches in the code anyway.
Navdeep Parhar [Tue, 25 May 2021 20:47:06 +0000 (13:47 -0700)]
cxgbe(4): Update firmwares to 1.25.6.0.
Changes since 1.25.0.0 are listed here. This list comes from the
Release Notes for the "Chelsio Unified Wire v3.14.0.3 for Linux"
release dated 2021-05-21.
Fixes
-----
BASE:
- Fixed Back to back T6 100G-CR4 link coming up with NO FEC sometimes.
- [T5] Try to bring up link in 1G speed if link doesn't come up on 10G.
- Fixed a bug to not allow BaseR fec in 100G speed.
- Fixed linkup issues on BT adapter in 1G and 100M speed.
- Fixed an issue to allow driver to send VI_ENABLE multiple times (once
with rx disable and then later rx enable).
- Fixed rate limiting not working on class number 16 to 30.
- Fixed backward compatibility issue in port type interpretation with vpd
version 0x80.
ETH:
- Fixed a case when firmware failed to deliver NIC WR completion to host.
- No rate limit support for WR ETH_TX_PKTS2 due to performance reasons.
OFLD
- Fixed a connection hang in SO adapters when tp_plen_max (set by driver)
is more than the window size.
- Added fw_filter_vnic_mode to firmware API file (t4fw_interface.h)
- Use correct rx channel in coprocessor crypto completion (CPL_FW6_PLD). This
was causing out of order completion to host.
FOiSCSI
- Fixed a crash due to unaligned access of ipv6 address.
- Fixed a crash during lun reset.
Enhancements
------------
ETH:
- Rate limiting support added for encapsulated (vxlan, nvgre, geneve) NIC TCP
packets.
OFLD:
- More than 128 SGLs supported in FW_RI_FR_NSMR_WR. Now, more than 16GB
(upto 64GB) of PBLs can be written with single FW_RI_FR_NSMR_WR.
Warner Losh [Sat, 29 May 2021 05:01:52 +0000 (23:01 -0600)]
nvme: fix a race between failing the controller and failing requests
Part of the nvme recovery process for errors is to reset the
card. Sometimes, this results in failing the entire controller. When nda
is in use, we free the sim, which will sleep until all the I/O has
completed. However, with only one thread, the request fail task never
runs once the reset thread sleeps here. Create two threads to allow I/O
to fail until it's all processed and the reset task can proceed.
This is a temporary kludge until I can work out questions that arose
during the review, not least is what was the race that queueing to a
failure task solved. The original commit is vague and other error paths
in the same context do a direct failure. I'll investigate that more
completely before committing changing that to a direct failure. mav@
raised this issue during the review, but didn't otherwise object.
Multiple threads, though, solve the problem in the mean time until other
such means can be perfected.
Jessica Clarke [Sat, 29 May 2021 03:36:36 +0000 (04:36 +0100)]
.github: Attempt to un-break Clang 9 action
GitHub removed Clang 9 from the 20.04 image[1], breaking this build.
Thus, manually add the specific versioned packages we need for the
Ubuntu jobs to ensure they're installed. Note that we don't do the same
for macOS, as Homebrew does not allow multiple llvm@N to co-exist,
giving an error if you attempt to install a second one. In practice we
don't actually use the compiler field here for anything other than the
build name, it's only the cross-bindir that matters, so when it
eventually moves to 12 the name will get confusing but the job will
still work.
Kirk McKusick [Sat, 29 May 2021 02:41:05 +0000 (19:41 -0700)]
Fix fsck_ufs segfault when it needs to rerun.
The segfault was being hit in the rerun of Pass 1 in ginode() when
trying to get an inode that needs to be repaired. When the first run
of fsck_ffs finishes it clears the inode cache, but ginode() was
failing to check properly and tried to access the deallocated cache entry.
Reported by: Peter Holm
Reviewed by: Chuck Silvers
Tested by: Peter Holm and Chuck Silvers
MFC after: 3 days
Sponsored by: Netflix
John Baldwin [Fri, 21 May 2021 00:16:23 +0000 (17:16 -0700)]
cxgbe tom: Free pending iSCSI mbufs on connection shutdown.
If an iSCSI connection is shutdown abruptly (e.g. by a RST from the
peer), pending iSCSI PDUs and page pod work requests can be in the
ulp_pduq when the final CPL is received indicating the death of the
connection.
John Baldwin [Thu, 20 May 2021 23:03:19 +0000 (16:03 -0700)]
cxgbei: Fix a race between transfer setup and a peer reset.
In 4427ac3675f9, the TOM driver stopped sending work requests to
program iSCSI page pods directly and instead queued them to be written
asynchronously with iSCSI PDUs. The queue of mbufs to send is
protected by the inp lock. However, the inp cannot be safely obtained
from the toep since a RST from the remote peer might have cleared
toep->inp asynchronously in an ithread. To fix, obtain the inp from
the socket as is already done in icl_cxgbei_conn_pdu_queue_cb() and
fail the new transfer setup with ECONNRESET if the connection has been
reset.
To avoid passing sockets or inps into the page pod routines, pull the
mbufq out of the two relevant page pod routines such that the routines
queue new work request mbufs to a caller-supplied mbufq.
John Baldwin [Fri, 28 May 2021 23:45:29 +0000 (16:45 -0700)]
cxgbei: Support iSCSI offload on T6.
T6 makes several changes relative to T5 for receive of iSCSI PDUs.
First, earlier adapters issue either 2 or 3 messages to the host for
each PDU received: CPL_ISCSI_HDR contains the BHS of the PDU,
CPL_ISCSI_DATA (when DDP is not used for zero-copy receive) contains
the PDU data as buffers on the freelist, and CPL_RX_ISCSI_DDP with
status of the PDU such as result of CRC checks. In T6, a new
CPL_RX_ISCSI_CMP combines CPL_ISCSI_HDR and CPL_RX_ISCSI_DDP. Data
PDUs which are directly placed via DDP only report a single
CPL_RX_ISCSI_CMP message. Data PDUs received on the free lists are
reported as CPL_ISCSI_DATA followed by CPL_RX_ISCSI_CMP. Control PDUs
such as R2T are still reported via CPL_ISCSI_HDR and CPL_RX_ISCSI_DDP.
Supporting this requires changing the CPL_ISCSI_DATA handler to
allocate a PDU structure if it is not preceded by a CPL_ISCSI_HDR as
well as support for the new CPL_RX_ISCSI_CMP.
Second, when using DDP for zero-copy receive, T6 will only issue a
CPL_RX_ISCSI_CMP after a burst of PDUs have been received (indicated
by the F flag in the BHS). In this case, the CPL_RX_ISCSI_CMP can
reflect the completion of multiple PDUs and the BHS and TCP sequence
number included in the message are from the last PDU received in the
burst. Notably, the message does not include any information about
earlier PDUs received as part of the burst. Instead, the driver must
track the amount of data already received for a given transfer and use
this to compute the amount of data received in a burst. In addition,
the iSCSI layer currently has no way to permit receiving a logical PDU
which spans multiple PDUs. Instead, the driver presents each burst as
a single, "large" PDU to the iSCSI target and initiators. This is
done by rewriting the buffer offset and data length fields in the BHS
of the final PDU as well as rewriting the DataSN so that the received
PDUs appear to be in order.
To track all this, cxgbei maintains a hash table of 'cxgbei_cmp'
structures indexed by transfer tags for each offloaded iSCSI
connection. When a SCSI_DATA_IN message is received, the ITT from the
received BHS is used to find the necessary state in the hash table,
whereas SCSI_DATA_OUT replies use the TTT as the key. The structure
tracks the expected starting offset and DataSN of the next burst as
well as the rewritten DataSN value used for the previously received
PDU.
PAPANI SRIKANTH [Fri, 28 May 2021 06:17:56 +0000 (00:17 -0600)]
Newly added features and bug fixes in latest Microchip SmartPQI driver
It includes:
1)Newly added TMF feature.
2)Added newly Huawei & Inspur PCI ID's
3)Fixed smartpqi driver hangs in Z-Pool while running on FreeBSD12.1
4)Fixed flooding dmesg in kernel while the controller is offline during in ioctls.
5)Avoided unnecessary host memory allocation for rcb sg buffers.
6)Fixed race conditions while accessing internal rcb structure.
7)Fixed where Logical volumes exposing two different names to the OS it's due to the system memory is overwritten with DMA stale data.
8)Fixed dynamically unloading a smartpqi driver.
9)Added device_shutdown callback instead of deprecated shutdown_final kernel event in smartpqi driver.
10)Fixed where Os is crashed during physical drive hot removal during heavy IO.
11)Fixed OS crash during controller lockup/offline during heavy IO.
12)Fixed coverity issues in smartpqi driver
13)Fixed system crash while creating and deleting logical volume in a continuous loop.
14)Fixed where the volume size is not exposing to OS when it expands.
15)Added HC3 pci id's.
Make it under SI_SUB_CPU sysinit, instead of much later SI_SUB_DRIVERS.
The SI_SUB_DRIVERS survived from times when FPU used real ISA attachment,
now it is only pnp stub claiming id.
PR: 255997
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D30512
Jessica Clarke [Fri, 28 May 2021 18:07:17 +0000 (19:07 +0100)]
aic7xxx: Fix re-building firmware with -fno-common
The generated C output for aicasm_scan.l defines yylineno already, so
references to it from other files should use an extern declaration.
The STAILQ_HEAD use in aicasm_symbol.h also provided an identifier,
causing it to both define the struct type and define a variable of that
struct type, causing any C file including the header to define the same
variable. This variable is not used (and confusingly clashes with a
field name just below) and was likely caused by confusion when switching
between defining fields using similar type macros and defining the type
itself.
Mark Johnston [Fri, 28 May 2021 14:41:43 +0000 (10:41 -0400)]
libradius: Fix attribute length validation in rad_get_attr(3)
The length of the attribute header needs to be excluded when comparing
the attribute length against the length of the packet. Otherwise,
validation may incorrectly fail when fetching the final attribute in a
message.
Fixes: 8d5c78130 ("libradius: Fix input validation bugs")
Reported by: Peter Eriksson
Tested by: Peter Eriksson
MFC after: now
Sponsored by: The FreeBSD Foundation
Nathan Whitehorn [Fri, 28 May 2021 13:53:42 +0000 (09:53 -0400)]
Fix scripted installation from media without local distfiles.
The bsdinstall script target did not have the infrastructure to fetch
distfiles from a remote server the way the interactive installer does
on e.g. bootonly media. Solve this by factoring out the parts of the
installer that deal with fetching missing distributions into a new
install stage called 'fetchmissingdists', which is called by both the
interactive and scripted installer frontends.
In the course of these changes, cleaned up a few other issues with
the fetching of missing distribution files and added a warning if
fetching the MANIFEST file, which is used to verify the integrity of
the distribution files. We should at some point add cryptographic
signatures to MANIFEST so that it can be fetched safely if not present
on the install media (which it is for bootonly media).
projects / people / royger / freebsd.git / log