This patch updates the PTE flags when translate further (TF) is
enabled:
- With translate_further enabled, invalid PTEs can be 0. Reading
consecutive invalid PTEs as 0 is considered a fault. To prevent
this, ensure invalid PTEs have at least 1 bit set.
- The current invalid PTE flags settings to translate a retry fault
into a no-retry fault, doesn't work with TF enabled. As a result,
update invalid PTE flags settings which works for both TF enabled
and disabled case.
Fixes: 352e683b72e79d ("drm/amdgpu: Enable translate_further to extend UTCL2 reach") Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Suggested-by: Felix Kuehling <felix.kuehling@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: make optc32_phantom_crtc_post_enable, optc32_setup_manual_trigger and optc32_set_drr static
These three functions are not used outside the function
dcn32_optc.c, so the modification is defined as static.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_optc.c:159:6: warning: no previous prototype for function 'optc32_phantom_crtc_post_enable'.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_optc.c:218:6: warning: no previous prototype for ‘optc32_set_drr’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_optc.c:193:6: warning: no previous prototype for ‘optc32_setup_manual_trigger’.
These functions are not used outside the file dcn32_dccg.c, so the
modification is defined as static.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_dccg.c:257:6: warning: no previous prototype for ‘dccg32_otg_drop_pixel’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_dccg.c:248:6: warning: no previous prototype for ‘dccg32_otg_add_pixel’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_dccg.c:211:6: warning: no previous prototype for ‘dccg32_set_dpstreamclk’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_dccg.c:136:6: warning: no previous prototype for ‘dccg32_set_dtbclk_dto’.
These functions are not used outside the file dcn32_hubbub.c, so the
modification is defined as static.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_hubbub.c:912:6: warning: no previous prototype for ‘hubbub32_force_wm_propagate_to_pipes’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_hubbub.c:823:6: warning: no previous prototype for ‘hubbub32_wm_read_state’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_hubbub.c:772:6: warning: no previous prototype for ‘hubbub32_init_watermarks’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_hubbub.c:712:6: warning: no previous prototype for ‘hubbub32_force_usr_retraining_allow’.
These functions are not used outside the file dcn32_hubbub.c, so the
modification is defined as static.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_dccg.c:223:6: warning: no previous prototype for ‘dccg314_set_valid_pixel_rate’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_dccg.c:184:6: warning: no previous prototype for ‘dccg314_set_dpstreamclk’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_dccg.c:140:6: warning: no previous prototype for ‘dccg314_set_dtbclk_dto’.
drm/amd/display: make enc314_stream_encoder_dvi_set_stream_attribute static
This symbol is not used outside of dcn314_dio_stream_encoder.c, so marks
it static.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_dio_stream_encoder.c:84:6: warning: no previous prototype for ‘enc314_stream_encoder_dvi_set_stream_attribute’.
These functions are not used outside the file dcn30_resource.c, so the
modification is defined as static.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_resource.c:1949:6: warning: no previous prototype for ‘is_refresh_rate_support_mclk_switch_using_fw_based_vblank_stretch’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_resource.c:1919:5: warning: no previous prototype for ‘get_frame_rate_at_max_stretch_100hz’.
Alex Deucher [Tue, 30 Aug 2022 14:59:49 +0000 (10:59 -0400)]
drm/amdgpu: make sure to init common IP before gmc
Move common IP init before GMC init so that HDP gets
remapped before GMC init which uses it.
This fixes the Unsupported Request error reported through
AER during driver load. The error happens as a write happens
to the remap offset before real remapping is done.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373
The error was unnoticed before and got visible because of the commit
referenced below. This doesn't fix anything in the commit below, rather
fixes the issue in amdgpu exposed by the commit. The reference is only
to associate this commit with below one so that both go together.
Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 9 Sep 2022 15:53:27 +0000 (11:53 -0400)]
drm/amdgpu: move nbio sdma_doorbell_range() into sdma code for vega
This mirrors what we do for other asics and this way we are
sure the sdma doorbell range is properly initialized.
There is a comment about the way doorbells on gfx9 work that
requires that they are initialized for other IPs before GFX
is initialized. However, the statement says that it applies to
multimedia as well, but the VCN code currently initializes
doorbells after GFX and there are no known issues there. In my
testing at least I don't see any problems on SDMA.
This is a prerequisite for fixing the Unsupported Request error
reported through AER during driver load.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373
The error was unnoticed before and got visible because of the commit
referenced below. This doesn't fix anything in the commit below, rather
fixes the issue in amdgpu exposed by the commit. The reference is only
to associate this commit with below one so that both go together.
Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 9 Sep 2022 15:47:20 +0000 (11:47 -0400)]
drm/amdgpu: move nbio ih_doorbell_range() into ih code for vega
This mirrors what we do for other asics and this way we are
sure the ih doorbell range is properly initialized.
There is a comment about the way doorbells on gfx9 work that
requires that they are initialized for other IPs before GFX
is initialized. In this case IH is initialized before GFX,
so there should be no issue.
This is a prerequisite for fixing the Unsupported Request error
reported through AER during driver load.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373
The error was unnoticed before and got visible because of the commit
referenced below. This doesn't fix anything in the commit below, rather
fixes the issue in amdgpu exposed by the commit. The reference is only
to associate this commit with below one so that both go together.
Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Li Ma [Mon, 5 Sep 2022 09:20:58 +0000 (17:20 +0800)]
drm/amd/pm:add new gpu_metrics_v2_3 to acquire average temperature info
Add new gpu_metrics_v2_3 to acquire average temperature info from SMU metrics. To acquire average temp info from gpu_metrics interface, but gpu_metrics_v2_2 only has members to show current temp info.
---
v1:
Only add average_temperature_gfx in gpu_metrics_v2_3.
v2:
Add average temp members for soc, core and l3 in gpu_metrics_v2_3 and put these new members at the end of gpu_metrics_v2_3. Add operation to read average temp info from metrics table.
v3:
Merge v1 and v2 and rename the patch.
v4:
Merge v3. Add firmware version judgment in vangogh_common_get_gpu_metrics to maintain backward compatibility and rename the patch. "return ret" on error scenario in smu_cmn_get_smc_version.
Signed-off-by: Li Ma <li.ma@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: make mpc32_program_shaper and mpc32_program_3dlut static
These two functions are not used outside the function dcn32_mpc.c, so the
modification is defined as static.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_mpc.c:704:6: warning: no previous prototype for ‘mpc32_program_shaper’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_mpc.c:900:6: warning: no previous prototype for ‘mpc32_program_3dlut’.
drm/amd/display: make dcn32_link_encoder_is_in_alt_mode and dcn32_link_encoder_get_max_link_cap static
These two functions are not used outside the function
dcn32_dio_link_encoder.c, so the modification is defined as static.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_dio_link_encoder.c:121:6: warning: no previous prototype for ‘dcn32_link_encoder_is_in_alt_mode’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_dio_link_encoder.c:136:6: warning: no previous prototype for ‘dcn32_link_encoder_get_max_link_cap’.
drm/amd/display: make enc32_stream_encoder_dvi_set_stream_attribute static
This symbol is not used outside of dcn32_dio_stream_encoder.c, so marks
it static.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_dio_stream_encoder.c:63:6: warning: no previous prototype for ‘enc32_stream_encoder_dvi_set_stream_attribute’.
Rafael Mendonca [Mon, 12 Sep 2022 22:34:32 +0000 (19:34 -0300)]
drm/amdgpu: Fix memory leak in hpd_rx_irq_create_workqueue()
If construction of the array of work queues to handle hpd_rx_irq offload
work fails, we need to unwind. Destroy all the created workqueues and
the allocated memory for the hpd_rx_irq_offload_work_queue struct array.
Fixes: 8e794421bc98 ("drm/amd/display: Fork thread to offload work of hpd_rx_irq") Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 8 Sep 2022 06:43:15 +0000 (08:43 +0200)]
drm/amdgpu: reorder CS code
Sort the functions in the order they are called
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 7 Sep 2022 09:37:06 +0000 (11:37 +0200)]
drm/amdgpu: cleanup CS init/fini and pass1
Cleanup the coding style and function names to represent the data
they process. Only initialize and cleanup the CS structure in
init/fini.
Check the size of the IB chunk in pass1.
v2: fix job initialisation order and use correct scheduler instance
v3: try to move all functional changes into a separate patch.
v4: move reordering and pass2 out of this patch as well
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Tue, 5 Apr 2022 08:35:31 +0000 (10:35 +0200)]
drm/amdgpu: use DMA_RESV_USAGE_BOOKKEEP v2
Use DMA_RESV_USAGE_BOOKKEEP for VM page table updates and KFD preemption fence.
v2: actually update all usages for KFD
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We found that the bo_list is missing a protection for its list entries.
Since that is fixed now this workaround can be removed again.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Tue, 1 Mar 2022 09:59:14 +0000 (10:59 +0100)]
drm/amdgpu: move setting the job resources
Move setting the job resources into amdgpu_job.c
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 28 Feb 2022 19:46:57 +0000 (20:46 +0100)]
drm/amdgpu: remove SRIOV and MCBP dependencies from the CS
We should not have any different CS constrains based
on the execution environment.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit a0f7e7f759cf ("drm/amd/display: fix i386 frame size warning")
aimed to address this for i386 but it did not help x86_64.
To reduce the amount of stack space that
dml30_ModeSupportAndSystemConfigurationFull() uses, mark
UseMinimumDCFCLK() as noinline, using the _for_stack variant for
documentation. While this will increase the total amount of stack usage
between the two functions (1632 and 1304 bytes respectively), it will
make sure both stay below the limit of 2048 bytes for these files. The
aforementioned change does help reduce UseMinimumDCFCLK()'s stack usage
so it should not be reverted in favor of this change.
drm/amd/display: Reduce number of arguments of dml31's CalculateFlipSchedule()
Most of the arguments are identical between the two call sites and they
can be accessed through the 'struct vba_vars_st' pointer. This reduces
the total amount of stack space that
dml31_ModeSupportAndSystemConfigurationFull() uses by 112 bytes with
LLVM 16 (1976 -> 1864), helping clear up the following clang warning:
drm/amd/display: Reduce number of arguments of dml31's CalculateWatermarksAndDRAMSpeedChangeSupport()
Most of the arguments are identical between the two call sites and they
can be accessed through the 'struct vba_vars_st' pointer. This reduces
the total amount of stack space that
dml31_ModeSupportAndSystemConfigurationFull() uses by 240 bytes with
LLVM 16 (2216 -> 1976), helping clear up the following clang warning:
drm/amd/display: Reduce number of arguments of dml32_CalculatePrefetchSchedule()
Several of the arguments are identical between the two call sites and
they can be accessed through the 'struct vba_vars_st' pointer. This
reduces the total amount of stack space that
dml32_ModeSupportAndSystemConfigurationFull() uses by 208 bytes with
LLVM 16 (1936 -> 1728), helping clear up the following clang warning:
drm/amd/display: Reduce number of arguments of dml32_CalculateWatermarksMALLUseAndDRAMSpeedChangeSupport()
Most of the arguments are identical between the two call sites and they
can be accessed through the 'struct vba_vars_st' pointer created at the
top of dml32_ModeSupportAndSystemConfigurationFull(). This reduces the
total amount of stack space that
dml32_ModeSupportAndSystemConfigurationFull() uses by 216 bytes with
LLVM 16 (2152 -> 1936), helping clear up the following clang warning:
Additionally, while modifying the arguments to
dml32_CalculateWatermarksMALLUseAndDRAMSpeedChangeSupport(), use 'v'
consistently, instead of 'v' mixed with 'mode_lib->vba'.
drm/amd/display: Fix register definitions for DCN32/321
[Why & How]
Fix the instatiation sequence for MPC registers and add a few other
missing register definitions that were ommited erroneously when copying
them over to enable runtime initialization of reigster offsets for
DCN32/321
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Fri, 5 Aug 2022 17:58:00 +0000 (01:58 +0800)]
drm/amd/display: Refactor SubVP calculation to remove FPU
Refactor calculation to remove floating point operations from dmub_srv.
To ensure that 32-bit compilation works well, we use the div64 family of
macros to do integer division for SubVP-related timing parameters.
Cc: Maíra Canal <mairacanal@riseup.net> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Isabella Basso <isabbasso@riseup.net> Cc: Magali Lemes <magalilemes00@gmail.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Samson Tam <Samson.Tam@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Co-developed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aric Cyr [Fri, 26 Aug 2022 21:53:34 +0000 (17:53 -0400)]
drm/amd/display: Don't adjust VRR unnecessarily
[why]
Do not need to spend time reprogramming DRR if there were no updates to
the parameters.
[how]
Compare the current stream state to the requested one to determine if an
update is required.
In amdgpu_dm the timing_changed flag is set but never used so can remove it.
Similarly, the stream update for VRR is done after dc_commit and should
not update its adjust field until after the update is completed. The
adjust field is managed by dc_stream_adjust_vmin_vmax and should not be
manually updated in amdgpu_dm.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo Chen [Fri, 26 Aug 2022 15:29:23 +0000 (11:29 -0400)]
drm/amd/display: Adding log for spread_spectrum_info
[Why & How]
Enable logging for spread_spectrum_percentage in spread_spectrum_info
to facilitate debugging for audio compliance issues
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Co-authored-by: Leo Chen <SanChuan.Chen@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by: Leo Chen <SanChuan.Chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yao Wang1 [Mon, 22 Aug 2022 10:30:31 +0000 (18:30 +0800)]
drm/amd/display: Limit user regamma to a valid value
[Why]
For HDR mode, we get total 512 tf_point and after switching to SDR mode
we actually get 400 tf_point and the rest of points(401~512) still use
dirty value from HDR mode. We should limit the rest of the points to max
value.
[How]
Limit the value when coordinates_x.x > 1, just like what we do in
translate_from_linear_space for other re-gamma build paths.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by: Yao Wang1 <Yao.Wang1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aurabindo Pillai [Thu, 25 Aug 2022 19:05:58 +0000 (15:05 -0400)]
drm/amd/display: add workaround for subvp cursor corruption for DCN32/321
[Why&How]
Kernel does not have a means to tell the userspace to use software
cursor. Due to lack of this functionality, reducing the max cursor size
is the only way to ensure that power savings of Subview port feature is
utilized for asics that support it. The workaround could be removed
after cursor caching is fixed while a subviewport config is active.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lee, Alvin [Thu, 25 Aug 2022 20:05:03 +0000 (16:05 -0400)]
drm/amd/display: Added debug option for forcing subvp num ways
[Description]
Regkey option for forcing num ways for subvp for debug purposes
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Thu, 25 Aug 2022 20:04:29 +0000 (16:04 -0400)]
drm/amd/display: Update viewport position for phantom pipes
[Description]
In some cases the viewport position of the main pipes can change without
triggering a full update. In this case the subvp phantom viewports must
be updated accordingly.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Taimur Hassan [Thu, 25 Aug 2022 16:33:12 +0000 (12:33 -0400)]
drm/amd/display: Round cursor width up for MALL allocation
[Why & How]
When calculating cursor size for MALL allocation, the cursor width should
be the actual width rounded up to 64 alignment. Additionally, the bit
depth should vary depending on color format.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Duncan Ma [Wed, 24 Aug 2022 18:35:03 +0000 (14:35 -0400)]
drm/amd/display: Correct dram channel width for dcn314
[Why]
The interpretation of the number of memory channels
differ by memory type, and this affects channel width
for the DML input.
[How]
Set dram channel width according to memory type for
dcn314.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by: Duncan Ma <duncan.ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Relax swizzle checks for video non-RGB formats on DCN314
[Why]
HW can support the display swizzle modes for video, and those are
preferable over standard or linear for decode use.
[How]
Remove the check for DCN314.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Hook up DCN314 specific dml implementation
[Why & How]
Add support for the DML314 functions and hook up DCN314 to use them.
This has some necessary additions for calculating Max VSTARTUP for
future features, but there's also some changes that we have to make
for pixel format/swizzle support.
That will come in a following patch to make this transition easier to
bisect.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Enable dlg and vba compilation for dcn314
We were not using the VBA and DLG files for DCN314, but the next
sequence of changes for DCN314 will require those files. This commit
adds the necessary files to the Makefile.
Cc: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We have some compilation errors in some DML files from DCN314 that we
never noticed because we were not compiling some of the DML files. This
commit fixes those syntax errors before we enable the compilation.
Cc: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aric Cyr [Wed, 24 Aug 2022 20:34:53 +0000 (16:34 -0400)]
drm/amd/display: Fix divide by zero in DML
[why]
Incorrectly using MicroTileWidth instead of MacroTileWidth for
calculations.
[how]
Remove all unused references to MicroTile and change them to MacroTile.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo Chen [Wed, 24 Aug 2022 19:34:24 +0000 (15:34 -0400)]
drm/amd/display: Fixing DIG FIFO Error
[Why & How]
DIG_FIFO_READ_START_LEVEL should only be set to default value (7) by software.
Removed all instances of resetting the register to 0
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by: Leo Chen <sancchen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Wed, 24 Aug 2022 15:53:50 +0000 (11:53 -0400)]
drm/amd/display: SW cursor fallback for SubVP
[Description]
Leverage SW cursor fall back for SubVP when the cursor is too big. We
want to take advantage of being able to fallback to SW cursor when
possible because it's not worth it to disable MCLK switching because the
cursor is slightly too big.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Tue, 23 Aug 2022 21:14:03 +0000 (17:14 -0400)]
drm/amd/display: Update MBLK calculation for SubVP
[Description]
Update MBLK calculation according to hardware doc. For DCC case we were
not allocation enough MALL due to an inaccurate MBLK calculation.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aurabindo Pillai [Thu, 11 Aug 2022 20:42:12 +0000 (16:42 -0400)]
drm/amd/display: Revert "Fallback to SW cursor if SubVP + cursor too big"
This reverts commit a4f1b04216023ff0f4cd89328b59ee6890248130 since
returning false in case of SubVP results in no cursor being visible on
desktop as there is no sw cursor fallback path on all platforms.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Chris Park [Tue, 23 Aug 2022 16:21:52 +0000 (12:21 -0400)]
drm/amd/display: Correct I2C register offset
[Why]
I2C register name starts with 1, unlike other registers that start with
0. This creates a problem with the new register macro refactoring when
I2C HW objects are created in an array.
[How]
Correct I2C register offset by making a new macro to account for array
offset.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by: Chris Park <chris.park@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aric Cyr [Sat, 20 Aug 2022 21:20:30 +0000 (17:20 -0400)]
drm/amd/display: Optimizations for DML math
[why]
Conditionals in the DML basic math functions significantly impact mode
enumeration.
[how]
Remove conditionals for floor/ceil operations which are used frequently
in DML and add an assertion for invalid callers using zero granuality.
Fix existing callers that rely on 0 granularity.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 30 Aug 2022 15:08:09 +0000 (11:08 -0400)]
drm/amdgpu: add HDP remap functionality to nbio 7.7
Was missing before and would have resulted in a write to
a non-existant register. Normally APUs don't use HDP, but
other asics could use this code and APUs do use the HDP
when used in passthrough.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jingyu Wang [Mon, 5 Sep 2022 08:38:25 +0000 (16:38 +0800)]
drm/amdgpu: cleanup coding style in amdgpu_amdkfd_gpuvm.c
Fix everything checkpatch.pl complained about in amdgpu_amdkfd_gpuvm.c
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Jingyu Wang <jingyuwang_vip@163.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yang Li [Thu, 1 Sep 2022 08:34:38 +0000 (16:34 +0800)]
drm/amd/display: remove possible condition with no effect (if == else)
Conditional statements have no effect to next process.So remove it.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2028 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yang Li [Thu, 1 Sep 2022 08:11:31 +0000 (16:11 +0800)]
drm/amd/display: Simplify bool conversion
The result of relational operation is Boolean, and the question mark
expression is redundant.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2027 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yang Li [Thu, 1 Sep 2022 07:56:55 +0000 (15:56 +0800)]
drm/amd/display: clean up some inconsistent indentings
This if statement is the content of the for statement above it. It
should be indented.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2026 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Thu, 8 Sep 2022 21:56:09 +0000 (17:56 -0400)]
drm/amdkfd: Migrate in CPU page fault use current mm
migrate_vma_setup shows below warning because we don't hold another
process mm mmap_lock. We should use current vmf->vma->vm_mm instead, the
caller already hold current mmap lock inside CPU page fault handler.
Fixes: e1f84eef313f ("drm/amdkfd: handle CPU fault on COW mapping") Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yang Wang [Fri, 9 Sep 2022 03:06:50 +0000 (11:06 +0800)]
drm/amdgpu: change the alignment size of TMR BO to 1M
align TMR BO size TO tmr size is not necessary,
modify the size to 1M to avoid re-create BO fail
when serious VRAM fragmentation.
v2:
add new macro PSP_TMR_ALIGNMENT for TMR BO alignment size
Signed-off-by: Yang Wang <KevinYang.Wang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Tue, 26 Jul 2022 19:13:30 +0000 (15:13 -0400)]
drm/amdkfd: Remove prefault before migrating to VRAM
Prefaulting potentially allocates system memory pages before a
migration. This adds unnecessary overhead. Instead we can skip
unallocated pages in the migration and just point migrate->dst to a
0-initialized VRAM page directly. Then the VRAM page will be inserted
to the PTE. A subsequent CPU page fault will migrate the page back to
system memory.
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Wed, 7 Sep 2022 16:30:12 +0000 (12:30 -0400)]
drm/amdkfd: handle CPU fault on COW mapping
If CPU page fault in a page with zone_device_data svm_bo from another
process, that means it is COW mapping in the child process and the
range is migrated to VRAM by parent process. Migrate the parent
process range back to system memory to recover the CPU page fault.
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: wangjianli <wangjianli@cdjrlc.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: Use per device reset_domain for XGMI on sriov configuration
For SRIOV configuration, host driver control the reset method(either FLR or
heavier chain reset). The host will notify the guest individually with FLR
message if individual GPU within the hive need to be reset. So for guest
side, no need to use hive->reset_domain to replace the original per
device reset_domain
Tom St Denis [Thu, 8 Sep 2022 13:36:18 +0000 (09:36 -0400)]
drm/amd/amdgpu: update GC 10.3.0 pwrdec
The 10.3 GC headers were missing most of the pwrdec block.
This patch adds the registers and bits present in the 10.1 header
but based on the contents of the 10.3 specs.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdkfd: Fix CRIU restore op due to doorbell offset
Recently introduced change to allocate doorbells only when the first
queue is created or mapped for CPU / GPU access, did not consider
Checkpoint Restore scenario completely. This fix allows the CRIU restore
operation by extending the doorbell optimization to CRIU restore
scenario.
Fixes: 16f0013157bf ("drm/amdkfd: Allocate doorbells only when needed") Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hamza Mahfooz [Tue, 6 Sep 2022 19:01:49 +0000 (15:01 -0400)]
drm/amdgpu: use dirty framebuffer helper
Currently, we aren't handling DRM_IOCTL_MODE_DIRTYFB. So, use
drm_atomic_helper_dirtyfb() as the dirty callback in the amdgpu_fb_funcs
struct.
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As per PCIE Base Spec r4.0 Section 6.18
'Software must not enable LTR in an Endpoint unless the Root Complex
and all intermediate Switches indicate support for LTR.'
This fixes the Unsupported Request error reported through AER during
ASPM enablement.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216455
The error was unnoticed before and got visible because of the commit
referenced below. This doesn't fix anything in the commit below, rather
fixes the issue in amdgpu exposed by the commit. The reference is only
to associate this commit with below one so that both go together.
Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Reported-by: Gustaw Smolarczyk <wielkiegie@gmail.com> Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie [Mon, 12 Sep 2022 11:12:22 +0000 (21:12 +1000)]
Merge tag 'drm-intel-gt-next-2022-09-09' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
UAPI Changes:
- Revert "drm/i915/dg2: Add preemption changes for Wa_14015141709"
The intent of Wa_14015141709 was to inform us that userspace can no
longer control object-level preemption as it has on past platforms
(i.e., by twiddling register bit CS_CHICKEN1[0]). The description of
the workaround in the spec wasn't terribly well-written, and when we
requested clarification from the hardware teams we were told that on the
kernel side we should also probably stop setting
FF_SLICE_CS_CHICKEN1[14], which is the register bit that directs the
hardware to honor the settings in per-context register CS_CHICKEN1. It
turns out that this guidance about FF_SLICE_CS_CHICKEN1[14] was a
mistake; even though CS_CHICKEN1[0] is non-operational and useless to
userspace, there are other bits in the register that do still work and
might need to be adjusted by userspace in the future (e.g., to implement
other workarounds that show up). If we don't set
FF_SLICE_CS_CHICKEN1[14] in i915, then those future workarounds would
not take effect.
- Align GuC/HuC firmware versioning scheme to kernel practices (John)
- Fix #6639: h264 hardware video decoding broken in 5.19 on Intel(R)
Celeron(R) N3060 (Nirmoy)
- Meteorlake (MTL) enabling (Matt R)
- GuC SLPC improvements (Vinay, Rodrigo)
- Add thread execution tuning setting for ATS-M (Matt R)
- Don't start PXP without mei_pxp bind (Juston)
- Remove leftover verbose debug logging from GuC error capture (John)
- Abort suspend on low system memory conditions (Nirmoy, Matt A, Chris)
- Add DG2 Wa_16014892111 (Matt R)
- Rename ggtt_view as gtt_view (Niranjana)
- Consider HAS_FLAT_CCS() in needs_ccs_pages (Matt A)
- Don't try to disable host RPS when this was never enabled. (Rodrigo)
- Clear stalled GuC CT request after a reset (Daniele)
- Remove runtime info printing from GuC time stamp logging (Jani)
- Skip Bit12 fw domain reset for gen12+ (Sushma, Radhakrishna)
- Make GuC log sizes runtime configurable (John)
- Selftest improvements (Daniele, Matt B, Andrzej)
Dave Airlie [Sun, 11 Sep 2022 11:46:57 +0000 (21:46 +1000)]
Merge tag 'drm-misc-next-2022-09-09' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.1-rc1:
[airlied - fix sun4i_tv build]
UAPI Changes:
- Hide unregistered connectors from GETCONNECTOR ioctl.
- drm/virtio no longer advertises LINEAR modifier, as it doesn't work.
-
Cross-subsystem Changes:
- Fix GPF in udmabuf failure path.
Core Changes:
- Rework TTM placement to use intersect/compatible functions.
- Drop legacy DP-MST support.
- More DP-MST related fixes, and move all state into atomic.
- Make DRM_MIPI_DBI select DRM_KMS_HELPER.
- Add audio_infoframe packing for DP.
- Add logging when some atomic check functions fail.
- Assorted documentation updates and fixes.
Driver Changes:
- Assorted cleanups and fixes in msm, lcdif, nouveau, virtio,
panel/ilitek, bridge/icn6211, tve200, gma500, bridge/*, panfrost, via,
bochs, qxl, sun4i.
- Add add AUO B133UAN02.1, IVO M133NW4J-R3, Innolux N120ACA-EA1 eDP panels.
- Improve DP-MST modeset state handling in amdgpu, nouveau, i915.
- Drop DP-MST from radeon driver, it was broken and only user of legacy
DP-MST.
- Handle unplugging better in vc4.
- Simplify drm cmdparser tests.
- Add DP support to ti-sn65dsi86.
- Add MT8195 DP support to mediatek.
- Support RGB565, XRGB64, and ARGB64 formats in vkms.
- Convert sun4i tv support to atomic.
- Refactor vc4/vec TV Modesetting, and fix timings.
- Use atomic helpers instead of simple display helpers in ssd130x.
Maintainer changes:
- Add Douglas Anderson as reviewer for panel-edp.
Imre Deak [Wed, 7 Sep 2022 14:25:42 +0000 (17:25 +0300)]
drm/dp_mst: Avoid deleting payloads for connectors staying enabled
When an MST connector stays enabled during a commit the connector's MST
state needs to be added to the atomic state, but the corresponding MST
payload allocation shouldn't be set for deletion; fix such modesets by
ensuring the above even if the connector was already enabled before the
modeset.
projects / people / jgross / linux.git / log