Maxime Ripard [Fri, 28 Jul 2023 09:06:17 +0000 (11:06 +0200)]
drm/tests: probe-helper: Remove call to drm_kunit_helper_free_device()
Calling drm_kunit_helper_free_device() to clean up the resources
allocated by drm_kunit_helper_alloc_device() is now optional and not
needed in most cases.
Maxime Ripard [Fri, 28 Jul 2023 09:06:16 +0000 (11:06 +0200)]
drm/tests: modes: Remove call to drm_kunit_helper_free_device()
Calling drm_kunit_helper_free_device() to clean up the resources
allocated by drm_kunit_helper_alloc_device() is now optional and not
needed in most cases.
Maxime Ripard [Fri, 28 Jul 2023 09:06:15 +0000 (11:06 +0200)]
drm/tests: client-modeset: Remove call to drm_kunit_helper_free_device()
Calling drm_kunit_helper_free_device() to clean up the resources
allocated by drm_kunit_helper_alloc_device() is now optional and not
needed in most cases.
Zhu Wang [Mon, 31 Jul 2023 02:13:45 +0000 (10:13 +0800)]
drm/bridge: fix -Wunused-const-variable= warning
When building with W=1, the following warning occurs.
drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c:48:17: warning: ‘anx781x_i2c_addresses’ defined but not used [-Wunused-const-variable=] static const u8 anx781x_i2c_addresses[] = {
^~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c:40:17: warning: ‘anx7808_i2c_addresses’ defined but not used [-Wunused-const-variable=] static const u8 anx7808_i2c_addresses[] = {
When CONFIG_IO is disabled, above two variables are not used,
since the place where it is used is inclueded in the macro
CONFIG_OF.
Even for drivers that do not depend on CONFIG_OF, it's almost
always better to leave out the of_match_ptr(), since the only
thing it can possibly do is to save a few bytes of .text if a
driver can be used both with and without it. Hence we remove
all of_match_ptr() used in other places.
drm: Fix references to drm_plane_helper_check_state()
As of commit a01cb8ba3f628293 ("drm: Move drm_plane_helper_check_state()
into drm_atomic_helper.c"), drm_plane_helper_check_state() no longer
exists, but is part of drm_atomic_helper_check_plane_state().
The section about converting existing KMS drivers to atomic modesetting
mentions the existence of a conversion guide, but does not reference it.
While the guide is old and rusty, it still contains useful information,
so add a link to it. Also link to the LWN.net articles that give an
overview about the atomic mode setting design.
While at it, remove the reference to unconverted virtual HW drivers, as
they've been converted.
drm/repaper: Reduce temporary buffer size in repaper_fb_dirty()
As the temporary buffer is no longer used to store 8-bit grayscale data,
its size can be reduced to the size needed to store the monochrome
bitmap data.
Fixes: 24c6bedefbe71de9 ("drm/repaper: Use format helper for xrgb8888 to monochrome conversion") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220317081830.1211400-6-geert@linux-m68k.org
drm_connector_init_with_ddc() can fail, but the call in
drm_bridge_connector_init() does not check that. Fix this by adding
the missing error handling.
Lyude Paul [Fri, 28 Jul 2023 22:58:57 +0000 (18:58 -0400)]
drm/nouveau/nvkm/dp: Add workaround to fix DP 1.3+ DPCD issues
Currently we use the drm_dp_dpcd_read_caps() helper in the DRM side of
nouveau in order to read the DPCD of a DP connector, which makes sure we do
the right thing and also check for extended DPCD caps. However, it turns
out we're not currently doing this on the nvkm side since we don't have
access to the drm_dp_aux structure there - which means that the DRM side of
the driver and the NVKM side can end up with different DPCD capabilities
for the same connector.
Ideally in order to fix this, we just want to use the
drm_dp_read_dpcd_caps() helper in nouveau. That's not currently possible
though, and is going to depend on having a bunch of the DP code moved out
of nvkm and into the DRM side of things as part of the GSP enablement work.
Until then however, let's workaround this problem by porting a copy of
drm_dp_read_dpcd_caps() into NVKM - which should fix this issue.
drm/ast: report connection status on Display Port.
Aspeed always report the display port as "connected", because it
doesn't set a .detect_ctx callback.
Fix this by providing the proper detect callback for astdp and dp501.
This also fixes the following regression:
Since commit fae7d186403e ("drm/probe-helper: Default to 640x480 if no
EDID on DP") The default resolution is now 640x480 when no monitor is
connected. But Aspeed graphics is mostly used in servers, where no monitor
is attached. This also affects the remote BMC resolution to 640x480, which
is inconvenient, and breaks the anaconda installer.
v2: Add .detect callback to the dp/dp501 connector (Jani Nikula)
v3: Use .detect_ctx callback, and refactors (Thomas Zimmermann)
Add a BMC virtual connector
v4: Better indent detect_ctx() functions (Thomas Zimmermann)
v5: Enable polling of the dp and dp501 connector status
(Thomas Zimmermann)
v6: Change check order in ast_astdp_is_connected (Jammy Huang)
Most aspeed devices have a BMC, which allows to remotely see the screen.
Also in the common use case, those servers don't have a display connected.
So add a Virtual connector, to reflect that even if no display is
connected, the framebuffer can still be seen remotely.
This prepares the work to implement a detect_ctx() for the Display port
connector.
v4: call drm_add_modes_noedid() with 4096x4096 (Thomas Zimmermann)
remove useless struct field init to 0 (Thomas Zimmermann)
don't use drm_simple_encoder_init() (Thomas Zimmermann)
inline ast_bmc_connector_init() (Thomas Zimmermann)
drm/panel: simple: Simplify matching using of_device_get_match_data()
Both the patform_driver and mipi_dsi_driver structures contain pointers
to the match table used, so the custom code to obtain match and match
data can be replaced by calls to of_device_get_match_data().
video: logo: LOGO should depend on FB_CORE i.s.o. FB
If CONFIG_FB_CORE=y and CONFIG_FB=n, the frame buffer bootup logos can
no longer be enabled. Fix this by making CONFIG_LOGO depend on
CONFIG_FB_CORE instead of CONFIG_FB, as there is no good reason for the
logo code to depend on the presence of real frame buffer device drivers.
This commit is redundant, as the root cause that resulted in a false
positive was fixed by commit 27f644dc5a77f8d9 ("x86: kmsan: use C
versions of memset16/memset32/memset64").
All debug messages in drm_gem_framebuffer_helper.c use drm_dbg_kms(),
except for one, which uses drm_dbg().
Replace the outlier by drm_dbg_kms() to restore consistency.
Maíra Canal [Tue, 23 May 2023 12:32:08 +0000 (09:32 -0300)]
drm/vkms: Fix race-condition between the hrtimer and the atomic commit
Currently, it is possible for the composer to be set as enabled and then
as disabled without a proper call for the vkms_vblank_simulate(). This
is problematic, because the driver would skip one CRC output, causing CRC
tests to fail. Therefore, we need to make sure that, for each time the
composer is set as enabled, a composer job is added to the queue.
In order to provide this guarantee, add a mutex that will lock before
the composer is set as enabled and will unlock only after the composer
job is added to the queue. This way, we can have a guarantee that the
driver won't skip a CRC entry.
This race-condition is affecting the IGT test "writeback-check-output",
making the test fail and also, leaking writeback framebuffers, as the
writeback job is queued, but it is not signaled. This patch avoids both
problems.
[v2]:
* Create a new mutex and keep the spinlock across the atomic commit in
order to avoid interrupts that could result in deadlocks.
v2:
- Add interpolation between the values of the LUT (Simon Ser)
v3:
- s/ratio/delta (Pekka)
- s/color_channel/channel_value (Pekka)
- s/lut_area/lut_channel
- Store the `drm_color_lut`, `lut_length`, and
`channel_value2index_ratio` inside a struct called `vkms_lut`
(Pekka)
- Pre-compute some constants values used through the LUT procedure
(Pekka)
- Change the switch statement to a cast to __u16* (Pekka)
- Make the apply_lut_to_channel_value return the computation result
(Pekka)
v4:
- Add a comment explaining that `enum lut_area` depends on the
layout of `struct drm_color_lut` (Pekka)
- Remove unused variable (kernel test robot)
v5:
- Mention that this will make it possible to run the test
igt@kms_plane@pixel-format (Maíra)
- s/had/has (Maíra)
Maxim Schwalm [Sun, 18 Jun 2023 08:50:45 +0000 (11:50 +0300)]
drm/tegra: output: hdmi: Support bridge/connector
Some Tegra device-trees may specify a video output graph, which involves
MHL bridge/simple bridge and/or connector framework. This patch adds
support for the bridge/connector attached to the HDMI output, allowing
us to model the hardware properly.
Inspired by: 29efdc2 ("drm/tegra: output: rgb: Support LVDS encoder bridge")
Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # ASUS TF T30 Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> # ASUS P1801-T T30 Tested-by: Robert Eckelmann <longnoserob@gmail.com> # ASUS TF101 T20 Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # ASUS TF201 T30 Signed-off-by: Maxim Schwalm <maxim.schwalm@gmail.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230618085046.10081-2-clamor95@gmail.com
Mikko Perttunen [Tue, 13 Jun 2023 09:52:14 +0000 (12:52 +0300)]
drm/tegra: Enable runtime PM during probe
Currently, engine drivers only enable runtime PM during the host1x
init callback. This can happen slightly later than the probe, which
can cause the power domain to intermittently not be turned off after
probe.
My hypothesis is that there is a race condition between the post-probe
power domain poweroff that is done from a queued work, and the
pm_runtime_enable call happening in the host1x init callback.
If the pm_runtime_enable call happens first, everything is OK and
the power off work can disable the power domain as PM runtime is
enabled and the device is runtime suspended. If power off work runs
first, PM runtime is still disabled for the device and the domain
must be kept powered.
Resolve the issue by moving the runtime PM enablement to the
probe function.
Yang Li [Fri, 21 Apr 2023 08:49:52 +0000 (16:49 +0800)]
drm/tegra: dpaux: Use devm_platform_ioremap_resource()
Convert platform_get_resource(),devm_ioremap_resource() to a single
call to devm_platform_ioremap_resource(), as this is exactly what this
function does.
Mikko Perttunen [Thu, 13 Apr 2023 08:22:02 +0000 (11:22 +0300)]
gpu: host1x: Return error when context device not attached to IOMMU
If a context device was not attached to IOMMU, we kept the old
success err value causing context devices to be unregistered but
success to be returned. This would mean that things would go on
but with context isolation disabled.
To decide on an explicit behavior, let's return an error code
here instead. If someone wants to go without IOMMU on a platform
modern enough to support context isolation, they can remove the
context devices from device tree.
drm/i915: Avoid -Wconstant-logical-operand in nsecs_to_jiffies_timeout()
A proposed update to clang's -Wconstant-logical-operand to warn when the
left hand side is a constant shows the following instance in
nsecs_to_jiffies_timeout() when NSEC_PER_SEC is not a multiple of HZ,
such as CONFIG_HZ=300:
drivers/gpu/drm/i915/gem/i915_gem_wait.c:189:24: warning: use of logical '&&' with constant operand [-Wconstant-logical-operand]
189 | if (NSEC_PER_SEC % HZ &&
| ~~~~~~~~~~~~~~~~~ ^
drivers/gpu/drm/i915/gem/i915_gem_wait.c:189:24: note: use '&' for a bitwise operation
189 | if (NSEC_PER_SEC % HZ &&
| ^~
| &
drivers/gpu/drm/i915/gem/i915_gem_wait.c:189:24: note: remove constant to silence this warning
1 warning generated.
Turn this into an explicit comparison against zero to make the
expression a boolean to make it clear this should be a logical check,
not a bitwise one.
drm/v3d: Avoid -Wconstant-logical-operand in nsecs_to_jiffies_timeout()
A proposed update to clang's -Wconstant-logical-operand to warn when the
left hand side is a constant shows the following instance in
nsecs_to_jiffies_timeout() when NSEC_PER_SEC is not a multiple of HZ,
such as CONFIG_HZ=300:
In file included from drivers/gpu/drm/v3d/v3d_debugfs.c:12:
drivers/gpu/drm/v3d/v3d_drv.h:343:24: warning: use of logical '&&' with constant operand [-Wconstant-logical-operand]
343 | if (NSEC_PER_SEC % HZ &&
| ~~~~~~~~~~~~~~~~~ ^
drivers/gpu/drm/v3d/v3d_drv.h:343:24: note: use '&' for a bitwise operation
343 | if (NSEC_PER_SEC % HZ &&
| ^~
| &
drivers/gpu/drm/v3d/v3d_drv.h:343:24: note: remove constant to silence this warning
1 warning generated.
Turn this into an explicit comparison against zero to make the
expression a boolean to make it clear this should be a logical check,
not a bitwise one.
drm/ssd130x: Use shadow-buffer helpers when managing plane's state
The commit 45b58669e532 ("drm/ssd130x: Allocate buffer in the plane's
.atomic_check() callback") moved the buffers allocation to be done in
the primary plane's .atomic_check() callback.
But it missed that since the driver uses a shadow-buffered plane, the
__drm_gem_{reset,duplicate,destroy}_shadow_plane() helper functions
must be used in the struct drm_plane_funcs handlers.
This was missed because the mentioned commit did not remove the macro
DRM_GEM_SHADOW_PLANE_FUNCS, which leads to the custom plane's atomic
state management handlers to not be used.
Fixes: 45b58669e532 ("drm/ssd130x: Allocate buffer in the plane's .atomic_check() callback") Reported-by: Arnd Bergmann <arnd@arndb.de> Closes: https://lore.kernel.org/dri-devel/20230727122412.2464210-1-arnd@kernel.org Suggested-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230727140453.577445-1-javierm@redhat.com
drm/ssd130x: Allocate buffer in the plane's .atomic_check() callback
Drivers are not allowed to fail after drm_atomic_helper_swap_state() has
been called and the new atomic state is stored into the current sw state.
Since the struct ssd130x_device .data_array is allocated in the encoder's
.atomic_enable callback, the operation can fail and this is after the new
state has been stored. So it can break an atomic mode settings assumption.
Fix this by having custom helpers to allocate, duplicate and destroy the
plane state, that will take care of allocating and freeing these buffers.
The fbdev emulation currently uses fbdev's default mmap code, which
has been written for I/O memory. Provide an mmap that uses GEM's mmap
infrastructure.
Utilize fine-grained fbdev macros to initialize struct fb_ops. The
macros set the read/write and the draw callbacks for DMA memory. Set
the fb_mmap callback to omapdrm's new mmap helper. Also select the
correct Kconfig token for fbdev's DMA helpers. Note that the DMA
helpers are the same as for system memory.
drm/omapdrm: Set VM flags in GEM-object mmap function
Use the mmap callback in struct drm_gem_object_funcs to set the
VM flags. Replace a number of mmap helpers in omapdrm with their
GEM helper counterparts. Generate DRM's file-operations instance
with GEM's DEFINE_DRM_GEM_FOPS.
The omapdrm driver uses DRM's drm_gem_mmap() helper to prepare
the VMA structure. It then modifies the resulting VMA state in
its own helper omap_gem_mmap_obj(). The patch improves this by
setting up the VMA in the mmap callback in drm_gem_object_funcs,
which is called from within drm_gem_mmap().
Omapdrm's omap_gem_mmap() and omap_gem_mmap() can then be removed
from the driver. A call to drm_gem_mmap() is sufficient for the
mmap operation.
Finally, with the omap functions gone, the drivers file_ops in
omapdriver_fops can be generated with DEFINE_DRM_GEM_FOPS, which
sets DRM's default helpers.
v2:
* detailed commit message (Javier)
* do not set VM_PFNMAP
Use fbdev's DMA helpers for fbdev emulation. The driver previously
used the I/O-memory helpers, while allocating DMA-able system memory.
This could (in theory) result in bus errors from accessing the memory
range.
This bug has been present since the exynos driver was first added.
v2:
* drop the pointless Fixes tag (Javier)
* fix typo in commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Inki Dae <inki.dae@samsung.com> Acked-by: Maxime Ripard <mripard@kernel.org> Cc: Inki Dae <inki.dae@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Cc: Alim Akhtar <alim.akhtar@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230707083422.18691-7-tzimmermann@suse.de
drm/tegra: Store pointer to vmap'ed framebuffer in screen_buffer
Tegra uses DMA-able memory, which has to be acessed with CPU ops
for system-memory. Store the framebuffer's vmap address in struct
fb_info.screen_buffer. The currently used field 'screen_base' is
for I/O memory.
Suggested-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Mikko Perttunen <mperttunen@nvidia.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230707083422.18691-6-tzimmermann@suse.de
fbdev: Add fb_ops init macros for framebuffers in DMA-able memory
Add initializer macros for struct fb_ops for framebuffers in DMA-able
memory areas. Also add a corresponding Kconfig token. As of now, this
is equivalent to system framebuffers and mostly useful for labeling
drivers correctly.
A later patch may add a generic DMA-specific mmap operation. Linux
offers a number of dma_mmap_*() helpers for different use cases.
sh: mach-sh7763rdp: Assign FB_MODE_IS_UNKNOWN to struct fb_videomode.flag
Assign FB_MODE_IS_UNKNOWN to sh7763fb_videomode.flag instead of
FBINFO_FLAG_DEFAULT. Both are 0, so the stored value does not change.
FBINFO_FLAG_DEFAULT is a flag for a framebuffer in struct fb_info.
Flags for videomodes are prefixed with FB_MODE_.
v3:
* include board name in commit message (Adrian)
v2:
* assign FB_MODE_IS_UNKNOWN (Adrian)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230715185343.7193-9-tzimmermann@suse.de
The flag FBINFO_DEFAULT is 0 and has no effect, as struct fbinfo.flags
has been allocated to zero by dmam_alloc_coherent(__GFP_ZERO). So do not
set it.
Flags should signal differences from the default values. After cleaning
up all occurrences of FBINFO_DEFAULT, the token will be removed.
Dan Carpenter [Fri, 21 Jul 2023 14:57:49 +0000 (17:57 +0300)]
drm/managed: Clean up GFP_ flag usage in drmm_kmalloc()
This code is not using the correct gfp flags which were passed in.
However, this does not affect runtime because kstrdup_const() is a
no-op in this context. (It just returns the "kmalloc" string literal
without doing an allocation.)
Pin-yen Lin [Tue, 18 Jul 2023 11:04:05 +0000 (19:04 +0800)]
drm/bridge: Remove redundant i2c_client in anx7625/it6505
These two drivers embed a i2c_client in their private driver data, but
only strict device is actually needed. Replace the i2c_client reference
with a struct device one.
Signed-off-by: Pin-yen Lin <treapking@chromium.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230718110407.1005200-1-wenst@chromium.org
drm/bridge: anx7625: Drop device lock before drm_helper_hpd_irq_event()
The device lock is used to serialize the low level power sequencing
operations. Since drm_helper_hpd_irq_event() could end up calling
.atomic_enable, which also calls power sequencing functions through
runtime PM, this results in a real deadlock. This was observed on an
MT8192-based Chromebook's external display (with appropriate patches [1]
and DT changes applied).
Move the drm_helper_hpd_irq_event() call outside of the lock range. The
lock only needs to be held so that the device status can be read back.
This is the bare minimum change to avoid the deadlock. The lock could
be dropped completely and have pm_runtime_get_if_in_use() increase the
reference count, but this is not the same as pm_runtime_suspended().
Dropping the lock completely also causes the internal display of the
same device to not function correctly if the internal bridge's
interrupt line is added in the device tree. Both the internal and
external display of said device each use one anx7625 bridge.
fbdev: Split frame buffer support in FB and FB_CORE symbols
Currently the CONFIG_FB option has to be enabled even if no legacy fbdev
drivers are needed (e.g: only to have support for framebuffer consoles).
The DRM subsystem has a fbdev emulation layer, but depends on CONFIG_FB
and so it can only be enabled if that dependency is enabled as well.
That means fbdev drivers have to be explicitly disabled if users want to
enable CONFIG_FB, only to use fbcon and/or the DRM fbdev emulation layer.
This patch introduces a non-visible CONFIG_FB_CORE symbol that could be
enabled just to have core support needed for CONFIG_DRM_FBDEV_EMULATION,
allowing CONFIG_FB to be disabled (and automatically disabling all the
fbdev drivers).
Nothing from fb_backlight.o and fbmon.o is used by the DRM fbdev emulation
layer so these two objects can be compiled out when CONFIG_FB is disabled.
video: Add auxiliary display drivers to Graphics support menu
The drivers in this subsystem are for either character-based or monochrome
LCD controllers. Which can fall into the same category of the DRM/KMS and
fbdev drivers, that are located under the "Graphics support" menu.
Add the auxdisplay drivers there as well to have all display drivers under
the same menu.
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Helge Deller <deller@gmx.de> Acked-by: Miguel Ojeda <ojeda@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230719081544.741051-2-javierm@redhat.com
David Jander [Fri, 21 Jul 2023 16:53:28 +0000 (18:53 +0200)]
drm/bridge: tc358767: give VSDELAY some positive value
The documentation is not clear about how this delay works.
Empirical tests have shown that with a VSDELAY of 0, the first
scanline is not properly formatted in the output stream when
DSI->DP mode is used. The calculation spreadsheets from Toshiba
seem to always make this value equal to the HFP + 10 for DSI->DP
use-case. For DSI->DPI this value should be > 2 and for DPI->DP
it seems to always be 0x64.
David Jander [Fri, 21 Jul 2023 16:53:27 +0000 (18:53 +0200)]
drm/bridge: tc358767: increase PLL lock time delay
The PLL often fails to lock with this delay. The new value was
determined by trial and error increasing the delay bit by bit
until the error did not occurr anymore even after several tries.
Then double that value was taken as the minimum delay to be safe.
Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Marek Vasut <marex@denx.de> Tested-by: Marek Vasut <marex@denx.de> # TC9595 Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Marek Vasut <marex@denx.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230721165328.3968759-1-l.stach@pengutronix.de
Faiz Abbas [Wed, 12 Jul 2023 06:49:37 +0000 (12:19 +0530)]
drm/arm/komeda: Remove component framework and add a simple encoder
The Komeda driver always expects the remote connector node to initialize
an encoder. It uses the component aggregator framework which consists
of component->bind() calls used to initialize the remote encoder and attach
it to the crtc. This makes it incompatible with connector drivers which
implement drm_bridge APIs.
Remove all component framework calls from the komeda driver and declare and
attach an encoder inside komeda_crtc_add().
The remote connector driver has to implement the DRM bridge APIs which
can be used to glue the encoder to the remote connector. Since we
usually pair this with a component encoder that also implements a
drm_bridge, dropping support is not expected to affect users of this
driver.
Rob Herring [Fri, 14 Jul 2023 17:45:34 +0000 (11:45 -0600)]
drm: Explicitly include correct DT includes
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Steven Price <steven.price@arm.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Acked-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230714174545.4056287-1-robh@kernel.org
Rob Herring [Fri, 14 Jul 2023 17:45:49 +0000 (11:45 -0600)]
gpu/host1x: Explicitly include correct DT includes
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Miquel Raynal [Thu, 22 Jun 2023 21:32:14 +0000 (23:32 +0200)]
gpu: host1x: Stop open-coding of_device_uevent()
There is apparently no reasons to open-code of_device_uevent() besides:
- The helper receives a struct device while we want to use the of_node
member of the struct device *parent*.
- of_device_uevent() could not be called by modules because of a missing
EXPORT_SYMBOL*().
In practice, the former point is not very constraining, just calling
of_device_uevent(dev->parent, ...) would have made the trick.
The latter point is more an observation rather than a real blocking
point because nothing prevented of_uevent() (called by the inline
function of_device_uevent()) to be exported to modules. In practice,
this helper is now exported, so nothing prevent us from using
of_device_uevent() anymore.
Let's use the core helper directly instead of open-coding it.
Cc: Thierry Reding <thierry.reding@gmail.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Mikko Perttunen <mperttunen@nvidia.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230622213214.3586530-3-miquel.raynal@bootlin.com
Miquel Raynal [Thu, 22 Jun 2023 21:32:13 +0000 (23:32 +0200)]
of: module: Export of_device_uevent()
The content of of_device_uevent() is currently hardcoded in a driver
that can be compiled as a module. Nothing prevents of_device_uevent() to
be exported to modules, most of the other helpers in of/device.c
actually are. The reason why this helper was not exported is because it
has been so far only useful in drivers/base, which is built-in anyway.
With the idea of getting rid of the hardcoded implementation of
of_device_uevent() in other places in the kernel, let's export it to GPL
modules (very much like its cousins in the same file).
Steven Price [Thu, 20 Jul 2023 10:51:27 +0000 (11:51 +0100)]
drm: debugfs: Silence warning from cast
Casting a pointer to an integer of a different size generates a warning
from the compiler. First cast the pointer to a pointer-sized type to
keep the compiler happy.
projects / people / pauldu / linux.git / log