Michal Privoznik [Thu, 15 Sep 2016 08:45:26 +0000 (10:45 +0200)]
m4: Check for sanlock_write_lockspace
Currently, we are checking for sanlock_add_lockspace_timeout
which is good for now. But in a subsequent patch we are going to
use sanlock_write_lockspace (which sets an initial value for io
timeout for sanlock). Now, there is no reason to check for both
functions in sanlock library as the sanlock_write_lockspace was
introduced in 2.7 release and the one we are currently checking
for in the 2.5 release. Therefore it is safe to assume presence
of sanlock_add_lockspace_timeout when sanlock_write_lockspace
is detected.
Moreover, the macro for conditional compilation is renamed to
HAVE_SANLOCK_IO_TIMEOUT (as it now encapsulates two functions).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There is a logic in place that if there is no real need for
memory-backend-file, qemuBuildMemoryBackendStr() returns 0. However
that wasn't the case with hugepage backing. The reason for that was
that we abused the 'pagesize' variable for storing that information, but
we should rather have a separate one that specifies whether we really
need the new object for hugepage backing. And that variable should be
set only if this particular NUMA cell needs special treatment WRT
hugepages.
During the code motion and creation of vsh.c, the function 'vshDeinit()'
in the (new) vsh.c was altered from whence it came in virsh.c such that
calling 'vshReadlineDeinit(ctl)' was conditional on "ctl->imode".
This causes a problem for the interactive running if the "quit" and "exit"
commands are used because 'cmdQuit' will clear ctl->imode, thus when the
interactive loop in main() of virsh.c exits because ctl->mode is clear and
virshDeinit is called which calls vshDeinit, the history file is now not
written. Conversely, if one had exited the interactive loop via pressing
<ctrl>D the file would be created because loop control is broken on EOF
and ctl->imode is not set to false.
This patch will remove the conditional call to vshReadlineDeinit and
restore the former behaviour.
Jim Fehlig [Wed, 28 Sep 2016 04:43:51 +0000 (22:43 -0600)]
doc: fix note about Xen credit scheduler
Commit 6c504d6a added a note to the virsh man page about the
deprecation of 'cap' and 'weight' settings for the credit
scheduler. To this day, the default scheduler in Xen is credit
and it supports setting 'cap' and 'weight'. Remove the deprecation
notice from the note on the Xen credit scheduler.
Jim Fehlig [Wed, 28 Sep 2016 04:18:50 +0000 (22:18 -0600)]
libxl: fix param assignment in domainGetSchedulerParameters
Due to a copy and paste error, the scheduler 'cap' parameter
was over-writing the 'weight' parameter when preparing the
return parameters in libxlDomainGetSchedulerParametersFlags.
As a result, the scheduler weight was never shown when getting
schedinfo and setting the weight failed as well
And allow libxl to handle channel element which creates a Xen
console visible to the guest as a low-bandwitdh communication
channel. If type is PTY we also fetch the tty after boot using
libxl_channel_getinfo to fetch the tty path. On socket case,
we autogenerate a path if not specified in the XML. Path autogenerated
is slightly different from qemu driver: qemu stores also on
"channels/target" but it creates then a directory per domain with
each channel target name. libxl doesn't appear to have a clear
definition of private files associated with each domain, so for
simplicity we do it slightly different. On qemu each autogenerated
channel goes like:
channels/target/<domain-name>/<target name>
Whereas for libxl:
channels/target/<domain-name>-<target name>
Should note that if path is not specified it won't persist,
existing only on live XML, unless user had initially specified it.
Since support for libxl channels only came on Xen >= 4.5 we therefore
need to conditionally compile it with LIBXL_HAVE_DEVICE_CHANNEL.
After this patch and having a qemu guest agent:
$ cat domain.xml | grep -a1 channel | head -n 5 | tail -n 4
<channel type='unix'>
<source mode='bind' path='/tmp/channel'/>
<target type='xen' name='org.qemu.guest_agent.0'/>
</channel>
The qemucapsprobe helper calls virQEMUCapsNewForBinaryInternal with
caps == NULL, causing the following crash:
Program received signal SIGSEGV, Segmentation fault.
#0 0x00007ffff788775f in virQEMUCapsInitHostCPUModel
(qemuCaps=qemuCaps@entry=0x649680, host=host@entry=0x10) at
src/qemu/qemu_capabilities.c:2969
#1 0x00007ffff7889dbf in virQEMUCapsNewForBinaryInternal
(caps=caps@entry=0x0, binary=<optimized out>,
libDir=libDir@entry=0x4033f6 "/tmp", cacheDir=cacheDir@entry=0x0,
runUid=runUid@entry=4294967295, runGid=runGid@entry=4294967295,
qmpOnly=true) at src/qemu/qemu_capabilities.c:4039
#2 0x0000000000401702 in main (argc=2, argv=0x7fffffffd968) at
tests/qemucapsprobe.c:73
So far, when it comes to 'virsh update-device --config' of disks
we are limiting ourselves for just the disk source update and
just for CDROMs and floppies. This makes no sense. Especially if
you look around and see that we already allow full update to
graphics and net devices. So let's just take whatever XML user
wants to have there and replace our internal definition with it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Jim Fehlig [Wed, 21 Sep 2016 21:02:34 +0000 (15:02 -0600)]
libxl: find virDomainObj in libxlDomainShutdownThread
libxl events are delivered to libvirt via the libxlDomainEventHandler
callback registered with libxl. Documenation in
$xensrc/tools/libxl/libxl_event.h states that the callback "may occur
on any thread in which the application calls libxl". This can result
in deadlock since many of the libvirt callees of libxl hold a lock on
the virDomainObj they are working on. When the callback is invoked, it
attempts to find a virDomainObj corresponding to the domain ID provided
by libxl. Searching the domain obj list results in locking each obj
before checking if it is active, and its ID equals the requested ID.
Deadlock is possible when attempting to lock an obj that is already
locked further up the call stack. Indeed, Max Ustermann reported an
instance of this deadlock
Fix the deadlock by moving the lookup of virDomainObj to the
libxlDomainShutdownThread. After this patch, libxl events are
enqueued on the libvirt side and processed by dedicated thread,
avoiding the described deadlock.
Reported-by: Max Ustermann <ustermann78@web.de> Reported-by: Guido Rossmueller <Guido.Rossmueller@gdata.de>
qemu: make qemuGetCompressionProgram return int not an enum
enum types are unsigned and the qemuGetCompressionProgram
function can return -1 on error. It is therefore inappropriate
to return an enum type. This fixes a build error where the
internal 'ret' variable was used in a comparison with -1
../../src/qemu/qemu_driver.c: In function 'qemuGetCompressionProgram':
../../src/qemu/qemu_driver.c:3280:5: error: comparison of unsigned expression < 0 is always false [-Werror=type-limits]
../../src/qemu/qemu_driver.c:3289:5: error: comparison of unsigned expression < 0 is always false [-Werror=type-limits]
cc1: all warnings being treated as errors
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Michal Privoznik [Tue, 20 Sep 2016 12:21:26 +0000 (14:21 +0200)]
conf: Skip post parse callbacks when creating copy
When creating a copy of virDomainDef we save ourselves the
trouble of writing deep-copy functions and just format and parse
back domain/device XML. However, the XML we are parsing was
already fully formatted - there is no reason to run post parse
callbacks (which fill in blanks - there are none!).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This is an internal flag that prevents our two entry points to
XML parsing (virDomainDefParse and virDomainDeviceDefParse) from
running post parse callbacks. This is expected to be used in
cases when we already have full domain/device XML and we are just
parsing it back (i.e. virDomainDefCopy or virDomainDeviceDefCopy)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Fri, 16 Sep 2016 14:29:41 +0000 (16:29 +0200)]
qemuDomainDefPostParse: Fetch qemuCaps from domain object
We can't rely on def->emulator path. It may be provided by user
as we give them opportunity to provide their own XML for
migration. Therefore the path may point to just whatever binary
(or even to a non-existent file). Moreover, this path is meant
for destination, but the capabilities lookup is done on source.
What we can do is to assume same capabilities for post parse
callbacks as the running domain has. They will be used just to
add some default models/controllers/devices/... anyway.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Some callers might want to pass yet another pointer to opaque
data to post parse callbacks. The driver generic one is not
enough because two threads executing post parse callback might
want to see different data (e.g. domain object pointer that
domain def belongs to).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
John Ferlan [Tue, 13 Sep 2016 16:05:39 +0000 (12:05 -0400)]
qemu: Get/return compressedpath program
Based upon a patch from Chen Hanxiao <chenhanxiao@gmail.com>, rather than
need to call virFindFileInPath twice, let's just save the path and pass it
along with the compressed type. (NB: the second call would be in virExec as
called from virCommandRunAsync which is called from qemuMigrationToFile
using the argument 'compressor' which up to this point would be the string
from the cfg file that isn't the fully qualified path).
Since we now have the path, we can remove qemuCompressProgramName which
would return NULL or the string representation of the compress type.
John Ferlan [Tue, 13 Sep 2016 15:51:54 +0000 (11:51 -0400)]
qemu: Remove qemuCompressProgramAvailable
There's only one caller and the code is duplicitous just converting the
recently converted cfg image name back into it's string value in order to
get/find the path to the image. A subsequent patch can return this path.
John Ferlan [Tue, 13 Sep 2016 14:11:00 +0000 (10:11 -0400)]
qemu: Use qemuGetCompressionProgram for error paths
Let's do some more code reuse - there are 3 other callers that care to
check/get the compress program. Each of those though cares whether the
requested cfg image is valid and exists. So, add a parameter to handle
those cases.
NB: We won't need to initialize the returned value in the case where
the cfg image doesn't exist since the called program will handle that.
John Ferlan [Fri, 23 Sep 2016 11:09:03 +0000 (07:09 -0400)]
qemu: Alter qemuGetCompressionProgram warning message
Add a new parameter 'styleFormat' to be used when printing the
warning message so that it's "clearer" what style of compression
call caused the error. Add that style to both messages as a paremter.
Also a VIR_WARN error message doesn't need to be translated
(e.g. inside _()), so remove the need for the translation.
John Ferlan [Tue, 13 Sep 2016 14:31:37 +0000 (10:31 -0400)]
qemu: Remove getCompressionType
There's only one caller now anyway... Besides it's just a shell for
getting the compress type. Subsequent patches will return the path
to the compression program.
John Ferlan [Tue, 13 Sep 2016 14:01:47 +0000 (10:01 -0400)]
qemu: Introduce helper qemuGetCompressionProgram
Split out the guts of getCompressionType to perform the same functionality
in the new helper program with a subsequent patch goal to be reusable for
other callers making similar checks/calls to ensure the compression type
is valid and that the compression program cannot be found.
libxl: increase usbdevice list only when finding such an input device
If passing an empty usbdevice_list to libxl, qemu will always get an
-usb parameter for HVM guests with only non-USB input devices. This
causes qemu to crash when passing pvusb device on HVM guests.
The solution is to allocate the list only when an item to put in it
is found.
Pavel Hrdina [Thu, 22 Sep 2016 14:36:33 +0000 (16:36 +0200)]
qemuhelptest: regenerate data for qemu-1.2.0
This patch also removes device data for qemu-1.2.0 as it was removed for
qemu-kvm-1.2.0 by commit ae3e29e6e. They are not required because we
parse only version from help output and return with error that this qemu
is too new to use help parsing.
Jiri Denemark [Wed, 22 Jun 2016 13:53:48 +0000 (15:53 +0200)]
qemu: Update guest CPU def in live XML
Storing the updated CPU definition in the live domain definition saves
us from having to update it over and over when we need it. Not to
mention that we will soon further update the CPU definition according to
QEMU once it's started.
A highly wanted side effect of this patch, libvirt will pass all CPU
features explicitly specified in domain XML to QEMU, even those that are
already included in the host model.
This patch should fix the following bugs:
https://bugzilla.redhat.com/show_bug.cgi?id=1207095
https://bugzilla.redhat.com/show_bug.cgi?id=1339680
https://bugzilla.redhat.com/show_bug.cgi?id=1371039
https://bugzilla.redhat.com/show_bug.cgi?id=1373849
https://bugzilla.redhat.com/show_bug.cgi?id=1375524
https://bugzilla.redhat.com/show_bug.cgi?id=1377913
Jiri Denemark [Tue, 9 Aug 2016 11:26:53 +0000 (13:26 +0200)]
cpu: Rework cpuCompare* APIs
Both cpuCompare* APIs are renamed to virCPUCompare*. And they should now
work for any guest CPU definition, i.e., even for host-passthrough
(trivial) and host-model CPUs. The implementation in x86 driver is
enhanced to provide a hint about -noTSX Broadwell and Haswell models
when appropriate.
The function is similar to virCPUDataCheckFeature, but it works directly
on CPU definition rather than requiring it to be transformed into CPU
data first.
Jiri Denemark [Fri, 17 Jun 2016 07:45:48 +0000 (09:45 +0200)]
cpu: Introduce virCPUTranslate
The API is supposed to make sure the provided CPU definition does not
use a CPU model which is not supported by the hypervisor (if at all
possible, of course).
Jiri Denemark [Thu, 4 Aug 2016 22:01:42 +0000 (00:01 +0200)]
cpu: Set nfeatures_max correctly in x86Decode
Keeping nfeatures_max set to 0 while nfeatures > 0 and some features are
already stored in features array is just asking for problems once we
want to add a new feature into the array.
Jiri Denemark [Thu, 23 Jun 2016 13:27:07 +0000 (15:27 +0200)]
cpu: Rework cpuUpdate
The reworked API is now called virCPUUpdate and it should change the
provided CPU definition into a one which can be consumed by the QEMU
command line builder:
- host-passthrough remains unchanged
- host-model is turned into custom CPU with a model and features
copied from host
- custom CPU with minimum match is converted similarly to host-model
- optional features are updated according to host's CPU
Jiri Denemark [Sat, 18 Jun 2016 09:19:17 +0000 (11:19 +0200)]
cpu: Make x86ModelFromCPU a bit smarter
x86ModelFromCPU is used to provide CPUID data for features matching
@policy. This patch allows callers to set @policy to -1 to get combined
CPUID for all CPU features (including those implicitly provided a CPU
model) specified in CPU def.
Jiri Denemark [Wed, 15 Jun 2016 14:45:47 +0000 (16:45 +0200)]
Show host model in domain capabilities
The domain capabilities XML is capable of showing whether each guest CPU
mode is supported or not with a possibility to provide additional
details. This patch enhances host-model capability to advertise the
exact CPU model which will be used as a host-model:
Jiri Denemark [Tue, 21 Jun 2016 14:02:07 +0000 (16:02 +0200)]
cpu: Drop false support for ARM cpu-model
The ARM CPU driver wrongly reported host CPU model as "host", which made
host-model to be just an alias for host-passthrough. Let's drop this
insanity.
Jiri Denemark [Wed, 15 Jun 2016 12:35:18 +0000 (14:35 +0200)]
qemu: Store host-model CPU in qemu capabilities
Host capabilities provide libvirt's view of the host CPU, but for a
useful support for host-model CPUs we really need a hypervisor's view of
the CPU. And since the view can be differ with emulator, qemu
capabilities is the best place to store the host CPU model.
This patch just copies the CPU model from host capabilities, but this
will change in the future.
Jiri Denemark [Thu, 23 Jun 2016 10:54:19 +0000 (12:54 +0200)]
conf: Introduce virCPUDefStealModel
The function moves CPU model related parts from one CPU definition to
another. It can be used to avoid unnecessary copies from a temporary CPU
definitions which will be freed anyway.
Jiri Denemark [Wed, 15 Jun 2016 14:15:44 +0000 (16:15 +0200)]
domcaps: Add CPU usable flag
In case a hypervisor is able to tell us a list of supported CPU models
and whether each CPU models can be used on the current host, we can
propagate this to domain capabilities. This is a better alternative
to calling virConnectCompareCPU for each supported CPU model.
Jiri Denemark [Tue, 14 Jun 2016 09:12:49 +0000 (11:12 +0200)]
cpu: Special case models == NULL in cpuGetModels
Some CPU drivers (such as arm) do not provide list of CPUs libvirt
supports and just pass any CPU model from domain XML directly to QEMU.
Such driver need to return models == NULL and success from cpuGetModels.
Jiri Denemark [Fri, 5 Aug 2016 12:42:15 +0000 (14:42 +0200)]
qemuxml2argvtest: Reorder CPU features
The x86 CPU driver translated each CPU definition from domain XML into
CPUID data and then back to CPU definition. This effectively sorted the
list of CPU features according to their CPUID values. Since this is
going to change, we need to reorder CPU features in a few test files to
make sure the generated QEMU command lines will not change.
Jiri Denemark [Thu, 4 Aug 2016 11:19:39 +0000 (13:19 +0200)]
qemuxml2argvtest: Set correct architecture for KVM guests
Testing PPC64/AArch64 KVM domains on x86_64 host only works because we
have a lot of bugs in our code. Since this series is going to fix them,
we need to make sure the host architecture matches guest for KVM
domains.
Jiri Denemark [Thu, 4 Aug 2016 11:25:02 +0000 (13:25 +0200)]
qemuxml2argvtest: Properly setup CPU models in qemuCaps
Adding x86 CPU models into a list of supported CPUs for non-x86
architectures is not a very good idea. Each architecture we test needs
to maintain its own list of supported CPU models.
Jiri Denemark [Thu, 4 Aug 2016 11:16:55 +0000 (13:16 +0200)]
testutilsqemu: Helpers for changing host CPU and arch
Changing a host architecture or a CPU is not as easy as assigning a new
value to the appropriate element in virCaps since there is a relation
between the CPU and host architecture (we don't really want to test
anything on an AArch64 host with core2duo CPU). This patch introduces
qemuTestSetHostArch and qemuTestSetHostCPU helpers which will make sure
the host architecture matches the host CPU.
Jiri Denemark [Wed, 3 Aug 2016 10:21:19 +0000 (12:21 +0200)]
qemuxml2argvtest: Update qemuCaps after parsing domain XML
Some parts of qemuCaps depend on guest architecture, machine type, and
possibly other things that we know only once the domain XML has been
parsed. Let's move all these updates into a dedicated function.
qemu: Use virDomainCapsCPUModels for cpuDefinitions
The list of supported CPU models in domain capabilities is stored in
virDomainCapsCPUModels. Let's use the same object for storing CPU models
in QEMU capabilities.
Applications can use it to inspect what CPU configuration modes are
supported for a specific combination of domain type, emulator binary,
guest architecture and machine type.
Jim Fehlig [Mon, 19 Sep 2016 17:34:34 +0000 (11:34 -0600)]
libxl: support VIR_MIGRATE_PERSIST_DEST migration flag
By default, virt-manager (and likely other libvirt-based apps) sets
the VIR_MIGRATE_PERSIST_DEST flag when invoking the migrate API, which
fails in a Xen setup since the libxl driver does not support the flag.
Persisting a domain is a trivial task in the grand scheme of migration,
so be nice to libvirt apps and add support for VIR_MIGRATE_PERSIST_DEST
in the libxl driver.
projects / libvirt.git / log