David CARLIER [Mon, 13 Jul 2020 13:36:09 +0000 (14:36 +0100)]
osdep.h: Always include <sys/signal.h> if it exists
Regularize our handling of <sys/signal.h>: currently we include it in
osdep.h, but only for OpenBSD, and we include it without an ifdef
guard in a couple of C files. This causes problems for Haiku, which
doesn't have that header.
Instead, check in configure whether sys/signal.h exists, and if it
does then always include it from osdep.h.
Signed-off-by: David Carlier <devnexen@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200703145614.16684-5-peter.maydell@linaro.org
[PMM: Expanded commit message; rename to HAVE_SYS_SIGNAL_H] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
David CARLIER [Mon, 13 Jul 2020 13:36:09 +0000 (14:36 +0100)]
build: Check that mlockall() exists
Instead of assuming that all POSIX platforms provide mlockall(),
test for it in configure. If the host doesn't provide this platform
then os_mlock() will fail -ENOSYS, as it does already on Windows.
This is necessary for Haiku, which does not have mlockall().
Signed-off-by: David Carlier <devnexen@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200703145614.16684-4-peter.maydell@linaro.org
[PMM: Expanded commit message; rename to HAVE_MLOCKALL] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
David CARLIER [Mon, 13 Jul 2020 13:36:09 +0000 (14:36 +0100)]
util/qemu-openpty.c: Don't assume pty.h is glibc-only
Instead of using an OS-specific ifdef test to select the "openpty()
is in pty.h" codepath, make configure check for the existence of
the header and use the new CONFIG_PTY instead.
This is necessary to build on Haiku, which also provides openpty()
via pty.h.
Signed-off-by: David Carlier <devnexen@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200703145614.16684-3-peter.maydell@linaro.org
[PMM: Expanded commit message; rename to HAVE_PTY_H] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Eric Auger [Mon, 13 Jul 2020 13:36:08 +0000 (14:36 +0100)]
virtio-iommu: Fix coverity issue in virtio_iommu_handle_command()
Coverity points out (CID 1430180) that the new case is missing
break or a /* fallthrough */ comment. Break is the right thing to
do as in that case, tail is not used.
Fixes 1733eebb9e ("virtio-iommu: Implement RESV_MEM probe request") Signed-off-by: Eric Auger <eric.auger@redhat.com> Reported-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200708160147.18426-1-eric.auger@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Raw writes to this register when in KVM mode can cause interrupts to be
raised (even when the PMU is disabled). Because the underlying state is
already aliased to PMINTENSET (which already provides raw write
functions), we can safely disable raw accesses to PMINTENCLR entirely.
Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Message-id: 20200707152616.1917154-1-aaron@os.amperecomputing.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Thomas Huth [Thu, 9 Jul 2020 16:00:39 +0000 (18:00 +0200)]
docs/system/s390x: Improve the 3270 documentation
There is some additional information about the 3270 support in our Wiki
at https://wiki.qemu.org/Features/3270 - so let's include this information
into the main documentation now to have one single source of information
(the Wiki page could later be removed).
While at it, I also shortened the lines of the first example a little bit.
Otherwise they showed up with a horizontal scrollbar in my Firefox browser.
Message-Id: <20200713075112.442-1-thuth@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
This script is intended to be used right after a push to a branch.
By default, it will look for the pipeline associated with the commit
that is the HEAD of the *local* staging branch. It can be used as a
one time check, or with the `--wait` option to wait until the pipeline
completes.
If the pipeline is successful, then a merge of the staging branch into
the master branch should be the next step.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20200709024657.2500558-2-crosa@redhat.com>
[thuth: Added the changes suggested by Erik Skultety] Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Tue, 30 Jun 2020 05:03:44 +0000 (07:03 +0200)]
disas/sh4: Add missing fallthrough annotations
Add fallthrough annotations to be able to compile the code without
warnings with -Wimplicit-fallthrough. Looking at the code, it seems
like the fallthrough is indeed intended here, so the comments should
be appropriate.
Message-Id: <20200630055953.9309-1-thuth@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Wed, 8 Jul 2020 18:19:44 +0000 (20:19 +0200)]
Remove the CONFIG_PRAGMA_DIAGNOSTIC_AVAILABLE switch
GCC supports "#pragma GCC diagnostic" since version 4.6, and
Clang seems to support it, too, since its early versions 3.x.
That means that our minimum required compiler versions all support
this pragma already and we can remove the test from configure and
all the related #ifdefs in the code.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200710045515.25986-1-thuth@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Thu, 9 Jul 2020 08:40:59 +0000 (10:40 +0200)]
docs/devel/fuzzing: Fix bugs in documentation
Fix typo - the option is called "--fuzz-target" and not "--fuzz_taget".
Also use a different fuzzer in the example, since "virtio-net-fork-fuzz"
does not seem to be a valid fuzzer target (anymore?).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200709084059.22539-1-thuth@redhat.com>
Thomas Huth [Thu, 9 Jul 2020 08:37:19 +0000 (10:37 +0200)]
tests/qtest/fuzz: Add missing spaces in description
There should be a space between "forking" and "for".
Message-Id: <20200709083719.22221-1-thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Thomas Huth <thuth@redhat.com>
In 45222b9a90, I fixed a broken check for rcu_enable_atfork introduced
in d6919e4cb6. I added a call to rcu_enable_atfork after the
call to qemu_init in fuzz.c, but forgot to include the corresponding
header, breaking --enable-fuzzing --enable-werror builds.
Fixes: 45222b9a90 ("fuzz: fix broken qtest check at rcu_disable_atfork") Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200708200104.21978-3-alxndr@bu.edu> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
configure: do not clobber CFLAGS with --enable-fuzzing
When configuring with --enable-fuzzing, we overwrote the CFLAGS
added by all the preceding checks. Instead of overwriting CFLAGS, append
the ones we need.
Fixes: adc28027ff ("fuzz: add configure flag --enable-fuzzing") Reported-by: Li Qiang <liq3ea@163.com> Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200708200104.21978-2-alxndr@bu.edu> Tested-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Message-Id: <20200707171326.16422-1-olaf@aepfle.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
* remotes/elmarco/tags/chardev-pull-request:
chardev: Extract system emulation specific code
chardev: Reduce "char-mux.h" scope, rename it "chardev-internal.h"
chardev: Restrict msmouse / wctablet / testdev to system emulation
tests/test-char: Remove unused "chardev/char-mux.h" include
monitor/misc: Remove unused "chardev/char-mux.h" include
char: fix use-after-free with dup chardev & reconnect
chardev: don't abort on attempt to add duplicated chardev
char-socket: initialize reconnect timer only when the timer doesn't start
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Li Feng [Fri, 22 May 2020 02:55:54 +0000 (10:55 +0800)]
char-socket: initialize reconnect timer only when the timer doesn't start
When the disconnect event is triggered in the connecting stage,
the tcp_chr_disconnect_locked may be called twice.
The first call:
#0 qemu_chr_socket_restart_timer (chr=0x55555582ee90) at chardev/char-socket.c:120
#1 0x000055555558e38c in tcp_chr_disconnect_locked (chr=<optimized out>) at chardev/char-socket.c:490
#2 0x000055555558e3cd in tcp_chr_disconnect (chr=0x55555582ee90) at chardev/char-socket.c:497
#3 0x000055555558ea32 in tcp_chr_new_client (chr=chr@entry=0x55555582ee90, sioc=sioc@entry=0x55555582f0b0) at chardev/char-socket.c:892
#4 0x000055555558eeb8 in qemu_chr_socket_connected (task=0x55555582f300, opaque=<optimized out>) at chardev/char-socket.c:1090
#5 0x0000555555574352 in qio_task_complete (task=task@entry=0x55555582f300) at io/task.c:196
#6 0x00005555555745f4 in qio_task_thread_result (opaque=0x55555582f300) at io/task.c:111
#7 qio_task_wait_thread (task=0x55555582f300) at io/task.c:190
#8 0x000055555558f17e in tcp_chr_wait_connected (chr=0x55555582ee90, errp=0x555555802a08 <error_abort>) at chardev/char-socket.c:1013
#9 0x0000555555567cbd in char_socket_client_reconnect_test (opaque=0x5555557fe020 <client8unix>) at tests/test-char.c:1152
The second call:
#0 0x00007ffff5ac3277 in raise () from /lib64/libc.so.6
#1 0x00007ffff5ac4968 in abort () from /lib64/libc.so.6
#2 0x00007ffff5abc096 in __assert_fail_base () from /lib64/libc.so.6
#3 0x00007ffff5abc142 in __assert_fail () from /lib64/libc.so.6
#4 0x000055555558d10a in qemu_chr_socket_restart_timer (chr=0x55555582ee90) at chardev/char-socket.c:125
#5 0x000055555558df0c in tcp_chr_disconnect_locked (chr=<optimized out>) at chardev/char-socket.c:490
#6 0x000055555558df4d in tcp_chr_disconnect (chr=0x55555582ee90) at chardev/char-socket.c:497
#7 0x000055555558e5b2 in tcp_chr_new_client (chr=chr@entry=0x55555582ee90, sioc=sioc@entry=0x55555582f0b0) at chardev/char-socket.c:892
#8 0x000055555558e93a in tcp_chr_connect_client_sync (chr=chr@entry=0x55555582ee90, errp=errp@entry=0x7fffffffd178) at chardev/char-socket.c:944
#9 0x000055555558ec78 in tcp_chr_wait_connected (chr=0x55555582ee90, errp=0x555555802a08 <error_abort>) at chardev/char-socket.c:1035
#10 0x000055555556804b in char_socket_client_test (opaque=0x5555557fe020 <client8unix>) at tests/test-char.c:1023
Peter Maydell [Sun, 12 Jul 2020 14:32:05 +0000 (15:32 +0100)]
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-misc-110720-2' into staging
Testing and misc build updates:
- tests/vm support for aarch64 VMs
- tests/tcg better cross-compiler detection
- update docker tooling to support registries
- update docker support for xtensa
- gitlab build docker images and store in registry
- gitlab use docker images for builds
- a number of skipIf updates to support move
- linux-user MAP_FIXED_NOREPLACE fix
- qht-bench compiler tweaks
- configure fix for secret keyring
- tsan fiber annotation clean-up
- doc updates for mttcg/icount/gdbstub
- fix cirrus to use brew bash for iotests
- revert virtio-gpu breakage
- fix LC_ALL to avoid sorting changes in iotests
# gpg: Signature made Sat 11 Jul 2020 15:56:42 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-and-misc-110720-2: (50 commits)
iotests: Set LC_ALL=C for sort
Revert "vga: build virtio-gpu as module"
tests: fix "make check-qtest" for modular builds
.cirrus.yml: add bash to the brew packages
tests/docker: update toolchain set in debian-xtensa-cross
tests/docker: fall back more gracefully when pull fails
docs: Add to gdbstub documentation the PhyMemMode
docs/devel: add some notes on tcg-icount for developers
docs/devel: convert and update MTTCG design document
tests/qht-bench: Adjust threshold computation
tests/qht-bench: Adjust testing rate by -1
travis.yml: Test also the other targets on s390x
shippable: pull images from registry instead of building
testing: add check-build target
containers.yml: build with docker.py tooling
gitlab: limit re-builds of the containers
tests: improve performance of device-introspect-test
gitlab: add avocado asset caching
gitlab: enable check-tcg for linux-user tests
linux-user/elfload: use MAP_FIXED_NOREPLACE in pgb_reserved_va
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Sat, 11 Jul 2020 18:27:59 +0000 (19:27 +0100)]
Merge remote-tracking branch 'remotes/philmd-gitlab/tags/avr-port-20200711' into staging
8bit AVR port from Michael Rolnik.
Michael started to work on the AVR port few years ago [*] and kept
improving the code over various series.
List of people who help him (in chronological order):
- Richard Henderson
- Sarah Harris and Edward Robbins
- Philippe Mathieu-Daudé and Aleksandar Markovic
- Pavel Dovgalyuk
- Thomas Huth
[*] The oldest contribution I could find on the list is from 2016:
https://lists.nongnu.org/archive/html/qemu-devel/2016-06/msg02985.html
$ make check-qtest-avr
TEST check-qtest-avr: tests/qtest/boot-serial-test
TEST check-qtest-avr: tests/qtest/cdrom-test
TEST check-qtest-avr: tests/qtest/device-introspect-test
TEST check-qtest-avr: tests/qtest/machine-none-test
TEST check-qtest-avr: tests/qtest/qmp-test
TEST check-qtest-avr: tests/qtest/qmp-cmd-test
TEST check-qtest-avr: tests/qtest/qom-test
TEST check-qtest-avr: tests/qtest/test-hmp
TEST check-qtest-avr: tests/qtest/qos-test
CI results:
. https://cirrus-ci.com/build/5697049146425344
. https://gitlab.com/philmd/qemu/-/pipelines/165328058
. https://travis-ci.org/github/philmd/qemu/builds/705817933
. https://app.shippable.com/github/philmd/qemu/runs/822/summary/console
# gpg: Signature made Sat 11 Jul 2020 10:03:11 BST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* remotes/philmd-gitlab/tags/avr-port-20200711: (32 commits)
target/avr/disas: Fix store instructions display order
target/avr/cpu: Fix $PC displayed address
target/avr/cpu: Drop tlb_flush() in avr_cpu_reset()
target/avr: Add section into QEMU documentation
tests/acceptance: Test the Arduino MEGA2560 board
tests/boot-serial: Test some Arduino boards (AVR based)
hw/avr: Add limited support for some Arduino boards
hw/avr: Add some ATmega microcontrollers
hw/avr: Add support for loading ELF/raw binaries
hw/misc: avr: Add limited support for power reduction device
hw/timer: avr: Add limited support for 16-bit timer peripheral
hw/char: avr: Add limited support for USART peripheral
tests/machine-none: Add AVR support
target/avr: Register AVR support with the rest of QEMU
target/avr: Add support for disassembling via option '-d in_asm'
target/avr: Initialize TCG register variables
target/avr: Add instruction translation - CPU main translation function
target/avr: Add instruction translation - MCU Control Instructions
target/avr: Add instruction translation - Bit and Bit-test Instructions
target/avr: Add instruction translation - Data Transfer Instructions
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/bonzini/tags/for-upstream: (47 commits)
linux-headers: update again to 5.8
apic: Report current_count via 'info lapic'
scripts: improve message when TAP based tests fail
target/i386: Enable TSX Suspend Load Address Tracking feature
target/i386: Add SERIALIZE cpu feature
softmmu/vl: Remove the check for colons in -accel parameters
cpu-throttle: new module, extracted from cpus.c
softmmu: move softmmu only files from root
pc: fix leak in pc_system_flash_cleanup_unused
cpus: Move CPU code from exec.c to cpus-common.c
target/i386: Correct the warning message of Intel PT
checkpatch: Change occurences of 'kernel' to 'qemu' in user messages
iscsi: return -EIO when sense fields are meaningless
iscsi: handle check condition status in retry loop
target/i386: sev: fail query-sev-capabilities if QEMU cannot use SEV
target/i386: sev: provide proper error reporting for query-sev-capabilities
KVM: x86: believe what KVM says about WAITPKG
target/i386: implement undocumented "smsw r32" behavior
target/i386: remove gen_io_end
Makefile: simplify MINIKCONF rules
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Max Reitz [Fri, 10 Jul 2020 16:32:52 +0000 (18:32 +0200)]
iotests: Set LC_ALL=C for sort
Otherwise the result is basically unpredictable.
(Note that the precise environment variable to control sorting order is
LC_COLLATE, but LC_ALL overrides LC_COLLATE, and we do not want the
sorting order to be messed up if LC_ALL is set in the environment.)
Reported-by: John Snow <jsnow@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200710163253.381630-3-mreitz@redhat.com>
Compiling all virtio-gpu objects into a single module isn't a good plan
because the individual objects have different CONFIG_* dependencies.
Leads to module load failures on s390x due to vga support being
disabled, which in turn breaks '-device virtio-gpu-device' (flagged by
travis ci).
So back to the drawing board for modular virtio-gpu ...
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200710203652.9708-3-kraxel@redhat.com>
Max Filippov [Thu, 9 Jul 2020 14:13:26 +0000 (15:13 +0100)]
tests/docker: update toolchain set in debian-xtensa-cross
Switch to the prebuilt xtensa toolchains release 2020.07.
Drop csp toolchain as the csp core is not a part of QEMU.
Add de233_fpu and dsp3400 toolchains to enable DFPU and FPU2000 tests.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[AJB: fix path in configure.sh] Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200708082347.27318-1-jcmvbkbc@gmail.com>
Message-Id: <20200709141327.14631-13-alex.bennee@linaro.org>
Alex Bennée [Thu, 9 Jul 2020 14:13:25 +0000 (15:13 +0100)]
tests/docker: fall back more gracefully when pull fails
I only spotted this in the small window between my testing with my
registry while waiting for the gitlab PR to go in. As we pre-pull the
registry image we know if that fails there isn't any point attempting
to use the cache. Fall back to the way we used to do it at that point.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200709141327.14631-12-alex.bennee@linaro.org>
Alex Bennée [Thu, 9 Jul 2020 14:13:16 +0000 (15:13 +0100)]
docs/devel: add some notes on tcg-icount for developers
This attempts to bring together my understanding of the requirements
for icount behaviour into one reference document for our developer
notes.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Pavel Dovgalyuk <dovgaluk@ispras.ru> Cc: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200709141327.14631-3-alex.bennee@linaro.org>
Alex Bennée [Thu, 9 Jul 2020 14:13:15 +0000 (15:13 +0100)]
docs/devel: convert and update MTTCG design document
Do a light conversion to .rst and clean-up some of the language at the
start now MTTCG has been merged for a while.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200709141327.14631-2-alex.bennee@linaro.org>
In 06c4cc3660b3, we split the multiplication in two parts to avoid
a clang warning. But because double still rounds to 53 bits, this
does not provide additional precision beyond multiplication by
nextafter(0x1p64, 0), the largest representable value smaller
than 2**64.
However, since we have eliminated 1.0, mutiplying by 2**64 produces
a better distribution of input values to the output values.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200626200950.1015121-3-richard.henderson@linaro.org>
Since the seed must be non-zero, subtracting 1 means puts the
rate in 0..UINT64_MAX-1, which allows the 0 and UINT64_MAX
thresholds to corrspond to 0% (never) and 100% (always).
Suggested-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200626200950.1015121-2-richard.henderson@linaro.org>
Thomas Huth [Mon, 8 Jun 2020 11:40:49 +0000 (13:40 +0200)]
travis.yml: Test also the other targets on s390x
s390x is our only big endian host in our CI, so building and testing QEMU
there is quite valuable. Thus let's also test the other targets with
additional jobs (also using different sets of pre-installed libraries to
get a better coverage of the things that we test).
Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200608114049.4693-1-thuth@redhat.com>
Alex Bennée [Wed, 1 Jul 2020 13:56:51 +0000 (14:56 +0100)]
testing: add check-build target
If we want to continue to split build and check phase it seems like a
good idea to allow building of the tests during our multi-threaded
build phase.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200701135652.1366-40-alex.bennee@linaro.org>
Alex Bennée [Wed, 1 Jul 2020 13:56:50 +0000 (14:56 +0100)]
containers.yml: build with docker.py tooling
Instead of building the docker files directly use the same docker.py
scripting as we do for building locally. This should help ensure we
use the exact same steps and allow us to cache properly when building
locally.
To get this working you have to have a fairly recent docker binary
otherwise you will see the error message:
=> ERROR importing cache manifest from registry.gitlab....
So far docker 19.03.12 works (from the docker apt repos) but 18.09.1,
build 4c52b90 which is packaged in Debian Buster fails.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200701135652.1366-39-alex.bennee@linaro.org>
Alex Bennée [Wed, 1 Jul 2020 13:56:49 +0000 (14:56 +0100)]
gitlab: limit re-builds of the containers
Most of the time we are just rebuilding the same things. We can skip
this although currently there is no mechanism for picking up new
distro releases.
Rather than try to be too fine grained allow any change to trigger all
the images being rebuilt.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200701135652.1366-38-alex.bennee@linaro.org>
tests: improve performance of device-introspect-test
Total execution time with "-m slow" and x86_64 QEMU, drops from 3
minutes 15 seconds, down to 54 seconds.
Individual tests drop from 17-20 seconds, down to 3-4 seconds.
The cost of this change is that any QOM bugs resulting in the test
failure will not be directly associated with the device that caused
the failure. The test case is not frequently identifying such bugs
though, and the cause is likely easily visible in the patch series
that causes the failure. So overall the shorter running time is
considered the more important factor.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
[thuth: Add the tree check to test_device_intro_none() and
test_device_intro_abstract(), too, just to be sure...] Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200710060719.22386-1-thuth@redhat.com>
Alex Bennée [Wed, 1 Jul 2020 13:56:47 +0000 (14:56 +0100)]
gitlab: add avocado asset caching
These can be quite big so lets cache them. I couldn't find any nots on
ccache in the gitlab docs so I've just ignored it for now.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200701135652.1366-36-alex.bennee@linaro.org>
Alex Bennée [Wed, 1 Jul 2020 13:56:46 +0000 (14:56 +0100)]
gitlab: enable check-tcg for linux-user tests
Switch to building in the new debian-all-test-cross image which has
most of the cross compilers inline.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200701135652.1366-35-alex.bennee@linaro.org>
Alex Bennée [Wed, 1 Jul 2020 13:56:45 +0000 (14:56 +0100)]
linux-user/elfload: use MAP_FIXED_NOREPLACE in pgb_reserved_va
Given we assert the requested address matches what we asked we should
also make that clear in the mmap flags. Otherwise we see failures in
the GitLab environment for some currently unknown but allowable
reason. We use MAP_FIXED_NOREPLACE if we can so we don't just clobber
an existing mapping. Also include the strerror string for a bit more
info on failure.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200701135652.1366-34-alex.bennee@linaro.org>
Alex Bennée [Wed, 1 Jul 2020 13:56:44 +0000 (14:56 +0100)]
tests/docker: add a linux-user testing focused image
We happily use all the cross images for both cross-building QEMU as
well as building the linux-user tests. However calling docker from
within docker seems not to work. As we can build in Debian anyway why
not include an image that has all the compilers available for
non-docker invocation.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200701135652.1366-33-alex.bennee@linaro.org>
Alex Bennée [Wed, 1 Jul 2020 13:56:43 +0000 (14:56 +0100)]
tests/tcg: add more default compilers to configure.sh
We were missing a bunch of compilers which we could use if they were
locally installed. The defaults are based on Debian as they seem to be
the best distro for well distributed cross-build compilers.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200701135652.1366-32-alex.bennee@linaro.org>
Alex Bennée [Wed, 1 Jul 2020 13:56:42 +0000 (14:56 +0100)]
gitlab: add acceptance testing to system builds
As part of migrating things from Travis to GitLab add the acceptance
tests. To do this:
- rename system1 to system-ubuntu-main
- rename system2 to system-fedora-misc
- split into build/check/acceptance
- remove -j from check stages
- use artifacts to save build stage
- add post acceptance template and use
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200701135652.1366-31-alex.bennee@linaro.org>
Alex Bennée [Wed, 1 Jul 2020 13:56:41 +0000 (14:56 +0100)]
tests/acceptance: skip LinuxInitrd 2gib with v4.16 on GitLab
This fails on GitLab but not when run locally on the same container
image. It's very confusing.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200701135652.1366-30-alex.bennee@linaro.org>
Alex Bennée [Wed, 1 Jul 2020 13:56:40 +0000 (14:56 +0100)]
tests/acceptance: skip multicore mips_malta tests on GitLab
For some reason these tests fail all the time on GitLab. I can
re-create the hang around 3% of the time locally but it doesn't seem
to be MTTCG related. For now skipIf on GITLAB_CI.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-Id: <20200701135652.1366-29-alex.bennee@linaro.org>
Alex Bennée [Wed, 1 Jul 2020 13:56:39 +0000 (14:56 +0100)]
tests/acceptance: fix dtb path for machine_rx_gdbsim
The old path doesn't exist but the rx-virt.dtb file has the same
checksum so lets use that.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200701135652.1366-28-alex.bennee@linaro.org>
Alex Bennée [Wed, 1 Jul 2020 13:56:37 +0000 (14:56 +0100)]
tests/docker: add packages needed for check-acceptance
We need additional python packages to run check-acceptance. Add them
to the docker images we will be using later.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200701135652.1366-26-alex.bennee@linaro.org>
Alex Bennée [Wed, 1 Jul 2020 13:56:36 +0000 (14:56 +0100)]
tests/docker: add --registry support to tooling
This allows us to point the tools towards a registry from which they
can grab pre-built layers instead of doing everything from scratch
each time. To enable this we need to be using the DOCKER_BUILDKIT
engine.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200701135652.1366-25-alex.bennee@linaro.org>
Alex Bennée [Wed, 1 Jul 2020 13:56:35 +0000 (14:56 +0100)]
gitlab: build containers with buildkit and metadata
According to the documentation to be able to use --cache-from for
remote registries you need to enable both buildkit and inline the
metadata. We want to do this to support pulling from gitlab when users
build their local docker images.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200701135652.1366-24-alex.bennee@linaro.org>
gitlab: convert jobs to use custom built containers
Now that we're building standard container images from
dockerfiles in tests/docker/dockerfiles, we can convert
the build jobs to use them. The key benefit of this is
that a contributor can now more easily replicate the CI
environment on their local machine. The container images
are cached too, so we are not spending time waiting for
the apt-get/dnf package installs to complete.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200622153318.751107-4-berrange@redhat.com>
[AJB: tweak naming convention] Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200701135652.1366-23-alex.bennee@linaro.org>
We have a number of container images in tests/docker/dockerfiles
that are intended to provide well defined environments for doing
test builds. We want our CI system to use these containers too.
This introduces builds of all of them as the first stage in the
CI, so that the built containers are available for later build
jobs. The containers are setup to use the GitLab container
registry as the cache, so we only pay the penalty of the full
build when the dockerfiles change. The main qemu-project/qemu
repo is used as a second cache, so that users forking QEMU will
see a fast turnaround time on their CI jobs.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200622153318.751107-3-berrange@redhat.com>
[AJB: tweak the tag format] Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200701135652.1366-22-alex.bennee@linaro.org>
gitlab: introduce explicit "container" and "build" stages
If no stage is listed, jobs get put in an implicit "test" stage.
Some jobs which create container images to be used by later stages
are currently listed as in a "build" stages.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Acked-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200622153318.751107-2-berrange@redhat.com>
Message-Id: <20200701135652.1366-21-alex.bennee@linaro.org>
Alex Bennée [Wed, 1 Jul 2020 13:56:30 +0000 (14:56 +0100)]
.gitignore: un-ignore .gitlab-ci.d
The sooner we deprecate in-tree builds the sooner this mess of regexes
can be thrown away.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200701135652.1366-19-alex.bennee@linaro.org>
Alex Bennée [Wed, 1 Jul 2020 13:56:29 +0000 (14:56 +0100)]
tests/docker: change tag naming scheme of our images
We've been misusing the tag naming scheme for some time by overloading
the post : section with the image type. Really it should be saved for
the revision of that particular build. Move the details to the other
side so we have:
qemu/image-name
with the implied :latest version added by the tooling.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200701135652.1366-18-alex.bennee@linaro.org>
Alex Bennée [Wed, 1 Jul 2020 13:56:28 +0000 (14:56 +0100)]
tests/docker: check for an parameters not empty string
Reported-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Suggested-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200701135652.1366-17-alex.bennee@linaro.org>
Alex Bennée [Wed, 1 Jul 2020 13:56:27 +0000 (14:56 +0100)]
tests/vm: allow us to take advantage of MTTCG
We currently limit TCG guests to -smp 1 but now we have added some
aarch64 guests we can do better when running on x86_64 hardware.
Raise the limit for TCG guests when it is safe to do so.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Robert Foley <robert.foley@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200701135652.1366-16-alex.bennee@linaro.org>
Alex Bennée [Wed, 1 Jul 2020 13:56:26 +0000 (14:56 +0100)]
tests/vm: switch from optsparse to argparse
optparse has been deprecated since version 3.2 and argparse is the
blessed replacement. Take the opportunity to enhance our help output
showing defaults when called.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Robert Foley <robert.foley@linaro.org>
Message-Id: <20200701135652.1366-15-alex.bennee@linaro.org>
Robert Foley [Wed, 1 Jul 2020 13:56:25 +0000 (14:56 +0100)]
tests/vm: Add workaround to consume console
This adds support to basevm.py so that we always
drain the console chars. This makes use of
support added in an earlier commit that allows
QEMUMachine to use the ConsoleSocket.
This is a workaround we found was needed since
there is a known issue where QEMU will hang waiting
for console characters to be consumed.
We also added the option of logging the console to a file.
LOG_CONSOLE=1 will now log the output to a file.
Signed-off-by: Robert Foley <robert.foley@linaro.org> Reviewed-by: Peter Puhov <peter.puhov@linaro.org> Acked-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-10-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-14-alex.bennee@linaro.org>
Robert Foley [Wed, 1 Jul 2020 13:56:24 +0000 (14:56 +0100)]
python/qemu: Add ConsoleSocket for optional use in QEMUMachine
We add the ConsoleSocket object, which has a socket interface
and which will consume all arriving characters on the
socket, placing them into an in memory buffer.
This will also provide those chars via recv() as
would a regular socket.
ConsoleSocket also has the option of dumping
the console bytes to a log file.
We also give QEMUMachine the option of using ConsoleSocket
to drain and to use for logging console to a file.
By default QEMUMachine does not use ConsoleSocket.
This is added in preparation for use by basevm.py in a later commit.
This is a workaround we found was needed for basevm.py since
there is a known issue where QEMU will hang waiting
for console characters to be consumed.
Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Cleber Rosa <crosa@redhat.com> Signed-off-by: Robert Foley <robert.foley@linaro.org> Reviewed-by: Peter Puhov <peter.puhov@linaro.org> Acked-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-9-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-13-alex.bennee@linaro.org>
Robert Foley [Wed, 1 Jul 2020 13:56:23 +0000 (14:56 +0100)]
tests/vm: change scripts to use self._config
This change converts existing scripts to using for example self.ROOT_PASS,
to self._config['root_pass'].
We made similar changes for GUEST_USER, and GUEST_PASS.
This allows us also to remove the change in basevm.py,
which adds __getattr__ for backwards compatibility.
Signed-off-by: Robert Foley <robert.foley@linaro.org> Reviewed-by: Peter Puhov <peter.puhov@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200601211421.1277-8-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-12-alex.bennee@linaro.org>
Robert Foley [Wed, 1 Jul 2020 13:56:22 +0000 (14:56 +0100)]
tests/vm: Added a new script for centos.aarch64.
centos.aarch64 creates a CentOS 8 image.
Also added a new kickstart script used to build the centos.aarch64 image.
Signed-off-by: Robert Foley <robert.foley@linaro.org> Reviewed-by: Peter Puhov <peter.puhov@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-7-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-11-alex.bennee@linaro.org>
Robert Foley [Wed, 1 Jul 2020 13:56:21 +0000 (14:56 +0100)]
tests/vm: Added a new script for ubuntu.aarch64.
ubuntu.aarch64 provides a script to create an Ubuntu 18.04 VM.
Another new file is also added aarch64vm.py, which is a module with
common methods used by aarch64 VMs, such as how to create the
flash images.
Signed-off-by: Robert Foley <robert.foley@linaro.org> Reviewed-by: Peter Puhov <peter.puhov@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-6-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-10-alex.bennee@linaro.org>
Robert Foley [Wed, 1 Jul 2020 13:56:20 +0000 (14:56 +0100)]
tests/vm: Add common Ubuntu python module
Add a common Ubuntu python module and make use of
it with the ubuntu.i386 script.
This is preparation for adding an Ubuntu script
ubuntu.aarch64. Splitting out the common
logic such as build_image() will reduce duplication.
Signed-off-by: Robert Foley <robert.foley@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-5-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-9-alex.bennee@linaro.org>
Robert Foley [Wed, 1 Jul 2020 13:56:19 +0000 (14:56 +0100)]
tests/vm: Added configuration file support
Changes to tests/vm/basevm.py to allow accepting a configuration file
as a parameter. Allows for specifying VM options such as
cpu, machine, memory, and arbitrary qemu arguments for specifying options
such as NUMA configuration.
Also added an example conf_example_aarch64.yml and conf_example_x86.yml.
Signed-off-by: Robert Foley <robert.foley@linaro.org> Reviewed-by: Peter Puhov <peter.puhov@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-4-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-8-alex.bennee@linaro.org>
Robert Foley [Wed, 1 Jul 2020 13:56:18 +0000 (14:56 +0100)]
tests/vm: Add configuration to basevm.py
Added use of a configuration to tests/vm/basevm.py.
The configuration provides parameters used to configure a VM.
This allows for providing alternate configurations to the VM being
created/launched. cpu, machine, memory, and NUMA configuration are all
examples of configuration which we might want to vary on the VM being created
or launched.
This will for example allow for creating an aarch64 vm.
Signed-off-by: Robert Foley <robert.foley@linaro.org> Reviewed-by: Peter Puhov <peter.puhov@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-3-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-7-alex.bennee@linaro.org>
Robert Foley [Wed, 1 Jul 2020 13:56:17 +0000 (14:56 +0100)]
tests/vm: pass args through to BaseVM's __init__
Adding the args parameter to BaseVM's __init__.
We will shortly need to pass more parameters to the class
so let's just pass args rather than growing the parameter list.
Signed-off-by: Robert Foley <robert.foley@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-2-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-6-alex.bennee@linaro.org>
Robert Foley [Wed, 1 Jul 2020 13:56:16 +0000 (14:56 +0100)]
util/coroutine: Cleanup start_switch_fiber_ for TSAN.
This is a cleanup patch to follow-up the patch which introduced TSAN.
This patch makes separate start_switch_fiber_ functions for TSAN and ASAN.
This does two things:
1. Unrelated ASAN and TSAN code is separate and each function only
has arguments that are actually needed.
2. The co->tsan_caller_fiber and co->tsan_co_fiber fields are only
access from within #ifdef CONFIG_TSAN.
Signed-off-by: Robert Foley <robert.foley@linaro.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200626170001.27017-1-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-5-alex.bennee@linaro.org>
target/avr/disas: Fix store instructions display order
While LOAD instructions use the target register as first
argument, STORE instructions use it as second argument:
LD Rd, X // Rd <- (X)
ST Y, Rd // (Y) <- Rr
Reported-by: Joaquin de Andres <me@xcancerberox.com.ar> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200707070021.10031-4-f4bug@amsat.org>
$PC is 16-bit wide. Other registers display addresses on a byte
granularity.
To have a coherent ouput, display $PC using byte granularity too.
Reviewed-by: Thomas Huth <huth@tuxfamily.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200707070021.10031-3-f4bug@amsat.org>
target/avr/cpu: Drop tlb_flush() in avr_cpu_reset()
Since commit 1f5c00cfdb tlb_flush() is called from cpu_common_reset().
Reviewed-by: Thomas Huth <huth@tuxfamily.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200707070021.10031-2-f4bug@amsat.org>
Thomas Huth [Sun, 5 Jul 2020 14:03:15 +0000 (16:03 +0200)]
target/avr: Add section into QEMU documentation
The new section explains basic ways of using AVR target in QEMU.
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
[thuth: Converted doc from texi to Sphinx syntax] Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20200705140315.260514-31-huth@tuxfamily.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Michael Rolnik [Fri, 24 Jan 2020 00:51:30 +0000 (01:51 +0100)]
tests/acceptance: Test the Arduino MEGA2560 board
The test is based on
https://github.com/seharris/qemu-avr-tests/tree/master/free-rtos/Demo
demo which. If working correctly, prints 'ABCDEFGHIJKLMNOPQRSTUVWX' out.
it also demostrates that timer and IRQ are working
As the path name demonstrates, the FreeRTOS tests target a
board based on a ATMega2560 MCU. We have one, the Arduino
MEGA2560.
Complementary documentation:
https://feilipu.me/2012/01/15/ethermega-arduino-mega-2560-and-freertos/
https://feilipu.me/2015/11/24/arduino_freertos/ (see 'Compatibility')
Signed-off-by: Michael Rolnik <mrolnik@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[rth: Squash multiple avocado fixups from f4bug] Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com> Tested-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Michael Rolnik [Fri, 24 Jan 2020 00:51:29 +0000 (01:51 +0100)]
tests/boot-serial: Test some Arduino boards (AVR based)
Print out 'T' through serial port.
The Arduino Duemilanove is based on a AVR5 CPU, while the
Arduino MEGA2560 on a AVR6 CPU.
Signed-off-by: Michael Rolnik <mrolnik@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[rth: Squash Arduino adjustments from f4bug] Tested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com> Acked-by: Thomas Huth <thuth@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20200705140315.260514-29-huth@tuxfamily.org>
hw/avr: Add limited support for some Arduino boards
Arduino boards are build with AVR chipsets. Add some of these
boards:
- Arduino Duemilanove
- Arduino Uno
- Arduino Mega
For more information:
https://www.arduino.cc/en/Main/Products
https://store.arduino.cc/arduino-genuino/most-popular
[AM: Remove word 'Atmel' from filenames and all elements of code] Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Joaquin de Andres <me@xcancerberox.com.ar>
[thuth: sysbus_init_child_obj() ==> object_initialize_child()] Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20200705140315.260514-26-huth@tuxfamily.org>
Add some AVR microcontrollers from the ATmega family:
- middle range: ATmega168 and ATmega328
- high range: ATmega1280 and ATmega2560
For product comparison:
https://www.microchip.com/wwwproducts/ProductCompare/ATmega168P/ATmega328P
https://www.microchip.com/wwwproducts/ProductCompare/ATmega1280/ATmega2560
[AM: Remove word 'Atmel' from filenames and all elements of code] Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
[thuth: Rebased to master, fixed object_initialize_child() calls etc.] Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20200705140315.260514-25-huth@tuxfamily.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Add avr_load_firmware() function to load firmware in ELF or
raw binary format.
[AM: Corrected the type of the variable containing e_flags]
[AM: Moved definition of e_flags conversion function to boot.c] Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com> Reviewed-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com> Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20200705140315.260514-24-huth@tuxfamily.org>
[PMD: Replace load_image_targphys() by load_image_mr()] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Michael Rolnik [Fri, 24 Jan 2020 00:51:19 +0000 (01:51 +0100)]
hw/misc: avr: Add limited support for power reduction device
This is a simple device of just one register, and whenever this
register is written to it calls qemu_set_irq function for each
of 8 bits/IRQs. It is used to implement AVR Power Reduction.
[AM: Remove word 'Atmel' from filenames and all elements of code] Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com> Signed-off-by: Michael Rolnik <mrolnik@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[rth: Squash include fix and file rename from f4bug] Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20200705140315.260514-22-huth@tuxfamily.org>
Michael Rolnik [Fri, 24 Jan 2020 00:51:18 +0000 (01:51 +0100)]
hw/timer: avr: Add limited support for 16-bit timer peripheral
These were designed to facilitate testing but should provide enough
function to be useful in other contexts. Only a subset of the functions
of each peripheral is implemented, mainly due to the lack of a standard
way to handle electrical connections (like GPIO pins).
[AM: Remove word 'Atmel' from filenames and all elements of code] Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com> Signed-off-by: Sarah Harris <S.E.Harris@kent.ac.uk> Signed-off-by: Ed Robbins <E.J.C.Robbins@kent.ac.uk> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[rth: Squash info mtree fixes and a file rename from f4bug] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Use qemu_log_mask(LOG_UNIMP), replace goto by return] Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20200705140315.260514-21-huth@tuxfamily.org>
[PMD: Check cpu-frequency-hz property in realize()] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Michael Rolnik [Fri, 24 Jan 2020 00:51:17 +0000 (01:51 +0100)]
hw/char: avr: Add limited support for USART peripheral
These were designed to facilitate testing but should provide enough
function to be useful in other contexts. Only a subset of the functions
of each peripheral is implemented, mainly due to the lack of a standard
way to handle electrical connections (like GPIO pins).
[AM: Remove word 'Atmel' from filenames and all elements of code] Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com> Signed-off-by: Michael Rolnik <mrolnik@gmail.com> Signed-off-by: Sarah Harris <S.E.Harris@kent.ac.uk> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[rth: Squash I/O size fix and file rename from f4bug] Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com> Reviewed-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com> Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20200705140315.260514-20-huth@tuxfamily.org>
Michael Rolnik [Fri, 24 Jan 2020 00:51:22 +0000 (01:51 +0100)]
tests/machine-none: Add AVR support
Add a single code line that will automatically provide
'machine none' test.
Signed-off-by: Michael Rolnik <mrolnik@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20200705140315.260514-28-huth@tuxfamily.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Michael Rolnik [Fri, 24 Jan 2020 00:51:21 +0000 (01:51 +0100)]
target/avr: Register AVR support with the rest of QEMU
Add AVR related definitions into QEMU, make AVR support buildable.
[AM: Remove word 'Atmel' from filenames and all elements of code] Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com> Signed-off-by: Michael Rolnik <mrolnik@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20200705140315.260514-23-huth@tuxfamily.org>
[PMD: Fixed @avr tag in qapi/machine.json] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org> Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com> Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
[rth: Fix spacing and const mnemonic arrays] Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20200705140315.260514-19-huth@tuxfamily.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
projects / qemu-xen.git / log