Make the __bitcount*() functions unconditionally available, by moving
them out of the #if _BSD_VISIBLE block. Other headers may depend on
__bitcount(). The dependencies can be a header not specified by
POSIX, and then namespace restrictions by _XOPEN_SOURCE are not
applicable, as it was reported. Or, we might grow an implementation
of some POSIX facility using __bitcount(), which also should work.
Reported by: Jason Schulz <schulz.j@gmail.com>
Discussed with: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
adrian [Sat, 26 Sep 2015 07:25:53 +0000 (07:25 +0000)]
* Add 11n HT40 support - i needed to send both HTINFO and HTCAP fields
in the join message so the firmware would pick it up.
* Strip out the direct hardware fiddling for 40MHz mode - the firmware
we're using doesn't require it (the rtl8712su firmware does; it
is less 'fullmac' than what we're using.)
* Fix the mbuf handling during errors - rsu_tx shouldn't free mbufs;
it's up to the caller to do so. This brings it in line with
what other drivers do or should be doing.
Tested:
* RTL8712, HT40 channel, STA mode (during this commit)
Exploit r288122 to address a cosmetic issue. Since PV chunk pages don't
belong to a vm object, they can't be paged out. Since they can't be paged
out, they are never enqueued in a paging queue. Nonetheless, passing
PQ_INACTIVE to vm_page_unwire() creates the appearance that these pages
are being enqueued in the inactive queue. As of r288122, we can avoid
this false impression by passing PQ_NONE.
adrian [Sat, 26 Sep 2015 07:08:35 +0000 (07:08 +0000)]
Add an initial driver for the AR9170 series draft-11n hardware from
Atheros.
Thanks to OpenBSD for providing a driver based on the original
Atheros open source driver circa 2008. This uses the early, pre-carl9170
atheros provided firmware.
It only supports 11bg at the moment. I've not tested it with 11a
(and so the TX rate control logic may be slightly wrong!) so if
you do have the dual-band version of this hardware please do let me know.
adrian [Sat, 26 Sep 2015 00:53:37 +0000 (00:53 +0000)]
Perform some rather amusing layering violations to add mbuf tags to the
net80211 receive path. This allows drivers (notably USB right now, but
anything/everything!) to optionally defer bulk RX of 802.11 frames until
/outside/ of the driver lock(s), rather than doing:
UNLOCK(sc);
ieee80211_input*()
LOCK(sc);
.. which is really stupid.
The existing API is maintaned - if ieee80211_input() / ieee80211_input_all()
is called then the RSSI/NF values are used. If the MIMO versions are called
with a given rx status pointer then it's used. Else, it'll use whatever
is in the RX mbuf tag.
Remove 'set -e' that are no longer needed as it is already default.
When bmake was initially imported at r241298 shell commands were no longer
ran with 'set -e' as they were before. This was fixed in r254980 so they
again always use 'set -e'.
Explicitly enable .MAKE.ALWAYS_PASS_JOB_QUEUE for bmake.
This is a NOP as r254419 enabled this by default in bmake. Add it here though
to ensure it is known that we are using this as a default and in case a
bmake import removes the default we have.
This tells bmake to always pass job tokens into sub-commands. Otherwise
it would only do so if the target being built depended on the special
.MAKE target (which causes _all_ commands to be executed with -n as well)
or if the command matches '${MAKE}/${.MAKE}/$(MAKE)/$(.MAKE)/make' (before
expansion, so ${LIB32WMAKE} would not qualify). Using '+' on a command
(which runs the command with -n) would not pass the job token even though it
is a documented way to achieve the .MAKE effect on a command.
Use per-cpu values for base and last in tc_cpu_ticks(). The values
are updated lockess, different CPUs write its own view of timecounter
state. The critical section is done for safety, callers of
tc_cpu_ticks() are supposed to already enter critical section, or to
own a spinlock.
The change fixes sporadical reports of too high values reported for
the (W)CPU on platforms that do not provide cpu ticker and use
tc_cpu_ticks(), in particular, arm*.
Diagnosed and reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
MFV r288063: make dataset property de-registration operation O(1)
A change to a property on a dataset must be propagated to its descendants
in case that property is inherited. For datasets whose information is
not currently loaded into memory (e.g. a snapshot that isn't currently
mounted), there is nothing to do; the property change will take effect
the next time that dataset is loaded. To handle updates to datasets that
are in-core, ZFS registers a callback entry for each property of each
loaded dataset with the dsl directory that holds that dataset. There
is a dsl directory associated with each live dataset that references
both the live dataset and any snapshots of the live dataset. A property
change is effected by doing a traversal of the tree of dsl directories
for a pool, starting at the directory sourcing the change, and invoking
these callbacks.
The current implementation both registers and de-registers properties
individually for each loaded dataset. While registration for a property is
O(1) (insert into a list), de-registration is O(n) (search list and then
remove). The 'n' for de-registration, however, is not limited to the size
(number of snapshots + 1) of the dsl directory. The eviction portion
of the life cycle for the in core state of datasets is asynchronous,
which allows multiple copies of the dataset information to be in-core
at once. Only one of these copies is active at any time with the rest
going through tear down processing, but all copies contribute to the
cost of performing a dsl_prop_unregister().
One way to create multiple, in-flight copies of dataset information
is by performing "zfs list" operations from multiple threads
concurrently. In-core dataset information is loaded on demand and then
evicted when reference counts drops to zero. For datasets that are not
mounted, there is no persistent reference count to keep them resident.
So, a list operation will load them, compute the information required to
do the list operation, and then evict them. When performing this operation
from multiple threads it is possible that some of the in-core dataset
information will be reused, but also possible to lose the race and load
the dataset again, even while the same information is being torn down.
Compounding the performance issue further is a change made for illumos
issue 5056 which made dataset eviction single threaded. In environments
using automation to manage ZFS datasets, it is now possible to create
enough of a backlog of dataset evictions to consume excessive amounts
of kernel memory and to bog down the system.
The fix employed here is to make property de-registration O(1). With this
change in place, it is hoped that a single thread is more than sufficient
to handle eviction processing. If it isn't, the problem can be solved
by increasing the number of threads devoted to the eviction taskq.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_dataset.c
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_dir.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_prop.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/dsl_dataset.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/dsl_dir.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/dsl_prop.h:
Associate dsl property callback records with both the
dsl directory and the dsl dataset that is registering the
callback. Both connections are protected by the dsl directory's
"dd_lock".
When linking callbacks into a dsl directory, group them by
the property type. This helps reduce the space penalty for the
double association (the property name pointer is stored once
per dsl_dir instead of in each record) and reduces the number of
strcmp() calls required to do callback processing when updating
a single property. Property types are stored in a linked list
since currently ZFS registers a maximum of 10 property types
for each dataset.
Note that the property buckets/records associated with a dsl
directory are created on demand, but only freed when the dsl
directory is freed. Given the static nature of property types
and their small number, there is no benefit to freeing the few
bytes of memory used to represent the property record earlier.
When a property record becomes empty, the dsl directory is either
going to become unreferenced a little later in this thread of
execution, or there is a high chance that another dataset is
going to be loaded that would recreate the bucket anyway.
Replace dsl_prop_unregister() with dsl_prop_unregister_all().
All callers of dsl_prop_unregister() are trying to remove
all property registrations for a given dsl dataset anyway. By
changing the API, we can avoid doing any lookups of callbacks
by property type and just traverse the list of all callbacks
for the dataset and free each one.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dmu_objset.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_vfsops.c:
Replace use of dsl_prop_unregister() with the new
dsl_prop_unregister_all() API.
illumos/illumos-gate@03bad06fbb261fd4a7151a70dfeff2f5041cce1f
Author: Justin Gibbs <gibbs@scsiguy.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Illumos issue:
6171 dsl_prop_unregister() slows down dataset eviction
https://www.illumos.org/issues/6171
bsd.obj.mk handles the needs fine. When an objdir exists it will
just rm -Rf the objdir. When it does not exist though it will
call 'clean' and 'cleandepend', which properly recurse in bsd.progs.mk.
Implement support for reading USB quirks from the kernel environment.
Refer to the usb_quirk(4) manual page for more details on how to use
this new feature.
Fix running make in src directories without a Makefile giving confusing errors.
This fixes the following errors:
make: don't know how to make bsd.README. Stop
make: don't know how to make auto.obj.mk. Stop
This is easily seen in sys/dev/*.
The new behavior is now the expected output:
make: no target to make.
This would happen as MAKESYSPATH (.../share/mk) is auto added to the -I list.
Any directory where make is ran in the src tree that has no local Makefile
would then try executing the target in share/mk/Makefile, which by default
was to build the first entry in FILES. Of course, because bsd.README and
auto.obj.mk are not in the current directory the error is shown.
This check only works for bmake, but I will still MFC it with an extra
'!defined(.PARSEDIR) ||' guard for stable/10.
adrian [Thu, 24 Sep 2015 17:23:41 +0000 (17:23 +0000)]
Fix up error path handling after the recent churn.
* Don't free the mbuf in the tx path - it uses the transmit path now,
so the caller frees the mbuf.
* Don't decrement the node ref upon error - that's up to the caller to
do as well.
This avoids needing a large boot partition / file system in order to
accommodate multiple kernels, and provides consistency with userland
debug. This also simplifies the process of moving kernel debug files
to a separate package and installing them on demand.
In addition, change kernel debug file extension to .debug, to match
userland debug files.
When using the supported kernel installation method the
/usr/lib/debug/boot/kernel directory will be renamed (to kernel.old)
as is done with /boot/kernel.
Developers wishing to maintain the historical behavior of installing
debug files in /boot/kernel/ can set KERN_DEBUGDIR="" in src.conf(5).
Reviewed by: bdrewery, brooks, imp, markj
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D1006
Fix most cases of bsd.progs.mk running duplicate or missing commands.
This mostly fixes an interaction with bsd.test.mk with PROGS and SCRIPTS.
This was most notable with 'make clean' and 'make install', which r281055
and r272055 attempted to address but were inadequate.
It also addresses similar issues in bsd.progs.mk when not using bsd.test.mk.
This also fixes cases of NOT running commands in the parent when using
bsd.progs.mk:
- 'make clean' was not run for the main process for Makefiles which had both
FILES and SUBDIR but no PROGS or SCRIPTS. This usually was just a
leftover Kyuafile.auto. One such example is usr.bin/bmake/tests/sysmk/t1/2.
- 'make obj' was not running in the current directory with bsd.test.mk due
to early inclusion of bsd.subdir.mk. This was not really a problem due to
the SUBDIRS using 'mkdir -p' for their objdirs.
There were subtle bugs causing this wrong behavior:
1. bsd.progs.mk needs to set SCRIPTS to empty when recursing to avoid
the sub-makes from installing, cleaning or building the SCRIPTS;
only the parent make should be doing this. r281055 effectively did
the same but wasn't enough.
2. CLEANFILES may contain (especially from *.test.mk) files which only
the parent should clean, such as from FILES and SCRIPTS. To resolve
sub-makes also cleaning these, reset CLEANFILES and CLEANDIRS in the
children before including bsd.prog.mk. A tempting alternative would be
to only handle CLEANFILES in the parent but then the child bsd.prog.mk
CLEANFILES of per-PROGS wouldn't be setup.
3. bsd.subdir.mk was included too soon in bsd.test.mk. It needs to be
included after bsd.prog.mk as the SCRIPTS logic is short-circuitted if
'install:' is already defined (which bsd.subdir.mk does). There is
actually no need to include bsd.subdir.mk from bsd.test.mk as bsd.prog.mk
and bsd.obj.mk will do so in the proper order. The description in r257095
covers this for FILES and was fixed differently, though changing the
handling of target(install) in bsd.prog.mk may make sense after more
research.
4. bsd.progs.mk had extra logic to handle recursing SCRIPTS if PROGS was
empty, which isn't its business to be doing. SCRIPTS is handled fine
by bsd.prog.mk. This mostly reverts and reworks the fix in r259209 and
partially reverts r272055.
5. bsd.progs.mk has no need to depend 'all:' on SCRIPTS and FILES. These
are handled by bsd.prog.mk/bsd.files.mk fine. This also partially reverts
r272055.
6. bsd.progs.mk was not drop-in safe for bsd.prog.mk. Move the PROGS
check from r273186 to allow it to be used safely.
Specific tested cases:
SCRIPTS:no PROGS:no FILES:yes SUBDIR:yes
usr.bin/bmake/tests/sysmk/t1/2
A full buildworld/installworld/clean comparison with mtree was also done.
The only relevant difference was the new fixed behavior of removing
Kyuafile.auto from the objdir in 'clean'.
Converting SCRIPTS to be a special case FILES group will make this less
fragile and is being explored.
One known remaining issue is 'cleandepend' removing the tags files for
every recursive call.
Note that the 'make clean' command runs for the CURDIR last, which can make
it appear to run multiple times when cleaning in tests/, but each command is
for a SUBDIR returning up the chain. This is purely bsd.subdir.mk behavior.
META_MODE: Fix 2nd build causing everything to rebuild due to changed CC.
In the first build the TOOLSDIR does not exit yet which causes CC to default
to the sys.mk version. Once a TOOLSDIR is created during the build though,
this logic was changing CC to ${TOOLSDIR}/usr/bin/cc even though that file
did not exist. Thus CC went from 'cc' to '/usr/bin/cc' which forced a
rebuild of everything while using the same compiler. Check that TOOLSDIR is
not empty to avoid this. If there is actually a TOOLSDIR cc then it will be
used and properly rebuild.
META_MODE: Follow-up r287865 and define CCACHE_DIR as realpath'd.
Filemon(4) will record paths as they are seen, not as fully resolved. make(1)
will take the .MAKE.META.IGNORE_PATHS values and resolve them. This creates
a discrepancy if CCACHE_DIR is a symlink. Fix this by ensuring it is
resolved for its actual usage.
We allow to modify only few fields in mode pages now, but still it is
not good if they unexpectedly change during failover. Also this fixes
reporting of "Mode parameters changed" UAs on secondary node.
Make HA peers announce their parameters on connect.
HA protocol requires strict version, parameters and configuration match.
Differences there may cause full set of problems up to kernel panic.
To avoid that, validate peer parameters on connect, and abort connection
immediately if some mismatch detected.
jeff [Tue, 22 Sep 2015 23:57:52 +0000 (23:57 +0000)]
Some refactoring of the buf/vm interface.
- Eliminate bogus page replacement that is inconsistently applied in the
invalidation loop in brelse. This has been a no-op in modern times as
biodone() is responsible for cleaning up after bogus pages. This
would've spammed the console with printfs at a minimum.
- Allow the compiler and human readers alike to reason about allocbuf()
by splitting it into constituent parts.
- Separate the VM manipulating and buf manipulating code in brelse() and
bufdone() so that the intentions are clear. This makes it evident that
there are several duplicated buf pages loops that will be consolidated
at a later time.
Call ast when handling irq from userspace, otherwise we could miss
reschedule. Right now arm_cpu_intr() does critical_exit() as the last
action, so the impact is not serious.
Remove duplicated interrupt disable in restore_registers macro, when
returning to usermode. The do_ast macro disabled interrupts for us.
Reviewed by: andrew
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3714
Change vm_page_unwire() such that it (1) accepts PQ_NONE as the specified
queue and (2) returns a Boolean indicating whether the page's wire count
transitioned to zero.
Exploit this change in vfs_vmio_release() to avoid pointlessly enqueueing
a page that is about to be freed.
(An earlier version of this change was developed by attilio@ and kmacy@.
Any errors in this version are my own.)
addr2line: skip CUs lacking debug info instead of bailing out
Some binaries (such as the FreeBSD kernel) contain a mixture of CUs
with and without debug information. Previously translate() exited upon
encountering a CU without debug information. Instead, just move on to
the next CU.
Reported by: royger
Reviewed by: royger
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3712
projects / people / julieng / freebsd.git / log