It can be safely removed from the VMX, VMWare will still boot the
machine and once another ethernet is added it is updated in the VMX to
zero. So do not require it and default to zero too since this part of
the XML is done as best effort and it is mentioned even in our
documentation.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Michal Privoznik [Tue, 16 Apr 2024 14:32:26 +0000 (16:32 +0200)]
tools: Introduce SSH proxy
This allows users to SSH into a domain with a VSOCK device:
ssh user@qemu/machineName
So far, only QEMU domains are supported AND qemu:///system is
looked for the first for 'machineName' followed by
qemu:///session. I took an inspiration from Systemd's ssh proxy
[1] [2].
To just work out of the box, it requires (yet unreleased) systemd
to be running inside the guest to set up a socket activated SSHD
on the VSOCK. Alternatively, users can set up the socket
activation themselves, or just run a socat that'll forward vsock
<-> TCP communication.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/579 Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Jiri Denemark [Thu, 9 May 2024 14:16:57 +0000 (16:16 +0200)]
network: Register dnsmasq with resolved only when really requested
An incorrect check for domainRegister caused the DNS server for a
virtual domain to be registered with systemd-resolved even if
register='no' attribute was present. Only omitting the attribute
completely would disable the registration.
Reported-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
docs: ensure HTML/images are built before running reference tests
The 'check-html-references' test will process the built HTML files,
so they must exist before it is run, along with any images that
they point to.
If using the older 'configure_file' command, no changes are needed
since that always gets executed at 'meson setup' time, rather than
at 'meson compile' time.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
test: drop bogus check for YAJL from libxl test/mock
The libxlmock.c conditionalizes on WITH_YAJL, but this mock is
used from other tests which only conditionalize on WITH_LIBXL.
The libxl code does not have any dependancy on YAJL, so the
bogus condition can be removed from the mock and also from
libxlxml2domconfigtest.c
Reviewed-by: Peter Krempa <pkrempa@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
tests: always build securityselinuxhelper if libselinux is present
The securityselinuxhelper build is conditionalized on the SELinux
security driver feature. It is also needed, however, by viridentitytest
whenever libselinux is present.
Reviewed-by: Peter Krempa <pkrempa@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The 'virsh-auth' test is mistakenly conditionalized on the libvirtd
daemon build, however, it just uses the 'test:///default' driver
URI, so does not require a daemon.
Reviewed-by: Peter Krempa <pkrempa@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
meson: record which other options are a pre-requisite
Several meson options cannot be enabled, without first enabling another
option. This adds a small comment prior to an option to record its
mandatory dependencies.
Reviewed-by: Peter Krempa <pkrempa@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
tests: fix two off-by-1 errors in read-big-pipe test
When testPipeFeeder copies the XML document into the padded buffer, it
tells virStrcpy that 'xmlsize' bytes are available. This is under
reporting size by 1 byte, and as a result it fails to copy the trailing
'\n' replacing it with '\0'. The return value of virStrcpy wasn't
checked, but was reporting this truncation.
When testPipeFeeder then sends the padded buffer down the pipe, it asks
to send 'emptyspace + xmlsize + 1' bytes, which means it sends the data,
as well as the trailing '\0' terminator.
Both bugs combined mean it is sending '\0\0' as the last bytes, instead
of '\n' which was intended. When virFileReadAll reads data from the
pipe, it ends up adding another '\0' resulting in a very NUL terminated
string ('\0\0\0'). This is all harmless, but should be fixed regardless.
Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The 'virsh' code hangs on open() on at least ppc64 and some other
arches. It can be provoked to hang even on x86 by reducing the size of
the buffer. It can be prevented from hanging on ppc64 by increasing the
size of the buffer.
What is happening is a result of differing page sizes, altering the
overall pipe capacity size, since pipes on linux default to 16 pages
in size and thus have architecture specific capacity when measured
in bytes.
* On x86, testPipeFeeder opens R+W, tries to write 140kb and
write() blocks because the pipe is full. This gives time for
virsh to start up, and it can open the pipe for O_RDONLY
since testPipeFeeder still has it open for write. Everything
works as intended.
* On ppc64, testPipeFeeder opens R+W, tries to write 140kb
and write() succeeds because the larger 64kb page size
resulted in greater buffer capacity for the pipe. It thus
quickly closes the pipe, removing the writer, and triggering
discard of all the unread data. Now virsh starts up, tries
to open the pipe for O_RDONLY and blocks waiting for a new
writer to open it, which will never happen. Meson kills
the test after 30 seconds.
NB, every now & then, it will not block because virsh starts
up quickly enough that testPipeFeeder has not yet closed the
write end of the pipe, giving the illusion of correctness.
The key flaw here is that it should not have been using O_RDWR
in testPipeFeeder. Synchronization is required such that both
virsh and testPipeFeeder have their respective ends of the pipe
open before any data is sent. This is trivially arranged by
using O_WRONLY in testPipeFeeder.
Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Peter Krempa [Mon, 6 May 2024 15:44:42 +0000 (17:44 +0200)]
udevListInterfacesByStatus: Don't try to return NULL names
In case when the interface is being detached/reattached it may happen
that udev will return NULL from 'udev_device_get_sysname()'.
As the RPC code requires nonnull strings in the return array it fails to
serialize such reply:
libvirt: XML-RPC error : Unable to encode message payload
Fix this by simply ignoring such interfaces as there's nothing we can
report in such case.
A similar fix was done to 'udevConnectListAllInterfaces' in commit 2ca94317ac6.
Resolves: https://issues.redhat.com/browse/RHEL-34615 Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Thu, 18 Apr 2024 07:19:52 +0000 (09:19 +0200)]
datatypes: Declare g_autoptr cleanup functions for more public objects
Some public objects (like virDomain, virInterface, and so on) are
missing g_autoptr() cleanup functions. Provide missing
declarations. Note, this is only for our internal use - hence
datatypes.h.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Michal Privoznik [Mon, 22 Apr 2024 09:55:46 +0000 (11:55 +0200)]
qemu: Substract isolcpus from all online affinity
When starting a domain and there's no vCPU/emulator pinning set,
we query the list of all online physical CPUs and set affinity of
the child process (which eventually becomes QEMU) to that list.
We can't assume libvirtd itself had affinity to all online CPUs
and since affinity of the child process is inherited, we should
fix it afterwards. But that's not necessarily correct. Users
might isolate some physical CPUs and we should avoid touching
them unless explicitly told so (i.e. vCPU/emulator pinning told
us so).
Therefore, when attempting to set affinity to all online CPUs
subtract the isolated ones.
Resolves: https://issues.redhat.com/browse/RHEL-33082 Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Some sysfs files contain either string representation of a bitmap
or just a newline character. An example of such file is:
/sys/devices/system/cpu/isolated. Our current implementation of
virFileReadValueBitmap() fails in the latter case, unfortunately.
Introduce a slightly modified version that accepts empty files.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Some sysfs files contain either string representation of a bitmap
or just a newline character. An example of such file is:
/sys/devices/system/cpu/isolated. Our current implementation of
virBitmapParseUnlimited() fails in the latter case,
unfortunately. Introduce a slightly modified version that accepts
empty files.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Adam Julis [Fri, 26 Apr 2024 18:28:47 +0000 (20:28 +0200)]
qemu_saveimage: add zstd to supported compression formats
Extend the list of supported formats, update and clarify comment
in qemu.conf.in (removed misleading sentence about the order of
compression format types).
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/589 Signed-off-by: Adam Julis <ajulis@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Recent rework of virshtest uncovered a subtle bug that was
dormant in now vsh but before that even in monolithic virsh.
In vsh.c there's this vshReadlineInit() function that's supposed
to initialize readline library, i.e. set those global rl_*
pointers. But it also initializes history library. Then, when
virsh/virt-admin quits, vshReadlineDeinit() is called which
writes history into a file (ensuring the parent directory
exists). So far no problem.
Problem arises when cmdComplete() is called (from a bash
completer, for instance). It does not guard call to
vshReadlineInit() with check for interactive shell (and it should
not), but it sets ctl->historyfile which signals to
vshReadlineDeinit() the history should be written.
Now, no real history is written, because nothing was entered on
the stdin, but the parent directory is created nevertheless. With
recent movement in virshtest.c this means some test cases might
create virsh history file which breaks our promise of not
touching user's data in test suite.
Resolves: https://bugs.gentoo.org/931109 Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Oleg Sviridov [Fri, 3 May 2024 09:26:51 +0000 (12:26 +0300)]
hyperv: prevent potential NULL dereference
Return value of a function 'virDomainChrDefNew' is dereferenced
at hyperv_driver.c without checking for NULL, which can lead to
NULL dereference immediately after.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Jim Fehlig [Mon, 29 Apr 2024 20:50:07 +0000 (14:50 -0600)]
libxl: Fix domxml-to-native conversion
Similar to commit 57d084febe, another case of the libxl driver not
adapting to modular daemons. When converting configuration that
contains a type='network' interface, the converter calls
virNetworkLookupByName, passing the hypervisor connection object
instead of a connection to virtnetworkd. E.g.
Tim Wiederhake [Fri, 9 Feb 2024 10:52:56 +0000 (11:52 +0100)]
cpu_map: Drop 'mpx' from x86 cpu models
The mpx feature was removed from the corresponding qemu cpu models.
With mpx in the libvirt cpu models, libvirt believes the feature
to be implicitly enabled when creating qemu VMs, while in fact it is
disabled.
This became an issue when commit 94eacd5a5f introduced new vmx-*
features, of which some are dependent on mpx (see "feature_dependencies"
table in qemu target/i386/cpu.c), e.g. vmx-exit-clear-bndcfgs and
vmx-entry-load-bndcfgs. These features cannot be enabled by qemu
without also mpx being enabled, leading to the error message
error: Failed to create domain from testdomain.xml
error: operation failed: guest CPU doesn't match
specification: missing features: mpx,vmx-exit-clear-bndcfgs,
vmx-entry-load-bndcfgs
when trying to create a VM with a "host-model" cpu on a host that
does support mpx and the mentioned vmx-* features:
Features removed from a CPU model are marked with "removed='yes'"
attribute in the CPU map. Such features will always be present in a CPU
definition produced by libvirt regardless on their state. In other words
a running domain (even saved in a file) will always explicitly contain
states of all features removed from the specified CPU model. This
enables migration to older libvirt which would otherwise think the
affected features should be enabled as they are still included in the
CPU model in the older version of CPU map. Migration from an old libvirt
to a new one would be broken as the new libvirt would think the removed
features should be disabled (because they are not included in the CPU
model anymore), which might not be the case on the source host. Thus we
were refusing to remove CPU features unless they were never working and
no domain could even be running with those features enabled.
This patch removes the limitation. When handling CPU definitions with
missing features marked as removed in the specified CPU model, we know
whether it comes from a running domain, in which case it must have been
created by older libvirt where the missing CPU features were not removed
yet. This means the features must have been enabled on the source and we
can automatically fix the definition by adding the missing features with
correct states.
We can safely remove any CPU feature from our CPU models now, but it
should only be used for features removed from all versions of a given
CPU model in QEMU because unversioned models correspond to v1.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
virCPUUpdate check the CPU definition for features that were marked as
removed in the specified CPU model and explicitly adds those that were
not mentioned in the definition. So far such features were added with
VIR_CPU_FEATURE_DISABLE policy, but the caller may want to use a
different policy in some situations, which is now possible via the
removedPolicy parameter.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
conf: Change return value of some CPU feature APIs
The virCPUDefAddFeatureInternal helper function only fails if it is
called with VIR_CPU_ADD_FEATURE_MODE_EXCLUSIVE, which is only used in
virCPUDefAddFeature. The other callers (virCPUDefUpdateFeature and
virCPUDefAddFeatureIfMissing) will never get anything but 0 from
virCPUDefAddFeatureInternal and their return type can be changed to
void.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
When using vSPC (Virtual Serial Port Concentrator) in vSphere the actual
address for it is saved in serialX.vspc in which case the
serialX.fileName is most probably something we can't get any useful
information from and we also fail during the parsing rendering any
dumpxml and similar tries unsuccessful.
Instead of parsing the vspc URL with something along the lines of
`virURIParse(vspc ? vspc : fileName)`, which could lead to us reporting
information that is very prune to misuse (the vSPC seemingly has a
protocol on top of the telnet connection; redefining the domain would
change the behaviour; the URL might have a fragment we are not saving;
etc.) or adding more XML knobs to indicate vSPC usage (which we would
not be able to configure; we'd have to properly error out everywhere;
etc.) let's just report dummy serial port that leads to nowhere (i.e.
type="null").
Resolves: https://issues.redhat.com/browse/RHEL-32182 Signed-off-by: Martin Kletzander <mkletzan@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
rpc: ensure temporary GSource is removed from client event loop
Users are seeing periodic segfaults from libvirt client apps,
especially thread heavy ones like virt-manager. A typical
stack trace would end up in the virNetClientIOEventFD method,
with illegal access to stale stack data. eg
==238721==ERROR: AddressSanitizer: stack-use-after-return on address 0x75cd18709788 at pc 0x75cd3111f907 bp 0x75cd181ff550 sp 0x75cd181ff548
WRITE of size 4 at 0x75cd18709788 thread T11
#0 0x75cd3111f906 in virNetClientIOEventFD /usr/src/debug/libvirt/libvirt-10.2.0/build/../src/rpc/virnetclient.c:1634:15
#1 0x75cd3210d198 (/usr/lib/libglib-2.0.so.0+0x5a198) (BuildId: 0a2311dfbbc6c215dc36f4b6bdd2b4b6fbae55a2)
#2 0x75cd3216c3be (/usr/lib/libglib-2.0.so.0+0xb93be) (BuildId: 0a2311dfbbc6c215dc36f4b6bdd2b4b6fbae55a2)
#3 0x75cd3210ddc6 in g_main_loop_run (/usr/lib/libglib-2.0.so.0+0x5adc6) (BuildId: 0a2311dfbbc6c215dc36f4b6bdd2b4b6fbae55a2)
#4 0x75cd3111a47c in virNetClientIOEventLoop /usr/src/debug/libvirt/libvirt-10.2.0/build/../src/rpc/virnetclient.c:1722:9
#5 0x75cd3111a47c in virNetClientIO /usr/src/debug/libvirt/libvirt-10.2.0/build/../src/rpc/virnetclient.c:2002:10
#6 0x75cd3111a47c in virNetClientSendInternal /usr/src/debug/libvirt/libvirt-10.2.0/build/../src/rpc/virnetclient.c:2170:11
#7 0x75cd311198a8 in virNetClientSendWithReply /usr/src/debug/libvirt/libvirt-10.2.0/build/../src/rpc/virnetclient.c:2198:11
#8 0x75cd31111653 in virNetClientProgramCall /usr/src/debug/libvirt/libvirt-10.2.0/build/../src/rpc/virnetclientprogram.c:318:9
#9 0x75cd31241c8f in callFull /usr/src/debug/libvirt/libvirt-10.2.0/build/../src/remote/remote_driver.c:6054:10
#10 0x75cd31241c8f in call /usr/src/debug/libvirt/libvirt-10.2.0/build/../src/remote/remote_driver.c:6076:12
#11 0x75cd31241c8f in remoteNetworkGetXMLDesc /usr/src/debug/libvirt/libvirt-10.2.0/build/src/remote/remote_client_bodies.h:5959:9
#12 0x75cd31410ff7 in virNetworkGetXMLDesc /usr/src/debug/libvirt/libvirt-10.2.0/build/../src/libvirt-network.c:952:15
The root cause is a bad assumption in the virNetClientIOEventLoop
method. This method is run by whichever thread currently owns the
buck, and is responsible for handling I/O. Inside a for(;;) loop,
this method creates a temporary GSource, adds it to the event loop
and runs g_main_loop_run(). When I/O is ready, the GSource callback
(virNetClientIOEventFD) will fire and call g_main_loop_quit(), and
return G_SOURCE_REMOVE which results in the temporary GSource being
destroyed. A g_autoptr() will then remove the last reference.
What was overlooked, is that a second thread can come along and
while it can't enter virNetClientIOEventLoop, it will register an
idle source that uses virNetClientIOWakeup to interrupt the
original thread's 'g_main_loop_run' call. When this happens the
virNetClientIOEventFD callback never runs, and so the temporary
GSource is not destroyed. The g_autoptr() will remove a reference,
but by virtue of still being attached to the event context, there
is an extra reference held causing GSource to be leaked. The
next time 'g_main_loop_run' is called, the original GSource will
trigger its callback, and access data that was allocated on the
stack by the previous thread, and likely SEGV.
To solve this, the thread calling 'g_main_loop_run' must call
g_source_destroy, immediately upon return, to guarantee that
the temporary GSource is removed.
CVE-2024-4418 Reviewed-by: Ján Tomko <jtomko@redhat.com> Reported-by: Martin Shirokov <shirokovmartin@gmail.com> Tested-by: Martin Shirokov <shirokovmartin@gmail.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This patch adds parsing of the virtio sound model, along with parsing
of virtio options and PCI/virtio-mmio address assignment.
A new 'streams' attribute is added for configuring number of PCM streams
(default is 2) in virtio sound devices. QEMU additionally has jacks and chmaps
parameters but these are currently stubbed, hence they are excluded in this
patch series.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
This drops the CentOS 8 Stream distro target, since that is going EOL
at the end of May, at which point it will cease to be installable
due to package repos being archived.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This brings in a fix to the job rules which solves a problem with
jobs getting skipped in merge requests in some scenarios. It also
changes the way Cirrus CI vars are set, which involves a weak to
the way $PATH is set in build.yml.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Michal Privoznik [Mon, 29 Apr 2024 07:49:17 +0000 (09:49 +0200)]
scripts/meson-dist.py: Get builddir from env too
When meson runs a dist script it sets both MESON_BUILD_ROOT and
MESON_DIST_ROOT envvars [1]. But for some reason, we took the
former as an argument and obtained the latter via env. Well,
obtain both via env.
1: https://mesonbuild.com/Reference-manual_builtin_meson.html#mesonadd_dist_script Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Thu, 7 Mar 2024 16:06:18 +0000 (17:06 +0100)]
vsh: Refactor logic in vshCommandParse
Refactor the existing logic using two nested loops with a jump into the
middle of both with 3 separate places fetching next token to a single
loop using a state machine with one centralized place to fetch next
tokens and add explanation comments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Peter Krempa [Mon, 15 Apr 2024 14:55:18 +0000 (16:55 +0200)]
vsh: Refactor parsed option and command assignment
Refactor the very old opaque logic (using multiple bitmaps) by
fully-allocating vshCmdOpt for each possible argument and then filling
them as they go rather than allocating them each time after it's parsed.
This simplifies the checkers and removes the need to cross-reference
multiple arrays.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Peter Krempa [Wed, 6 Mar 2024 16:26:56 +0000 (17:26 +0100)]
virsh: Introduce new 'VSH_OT_ARGV' accessors
In preparation for internal parser refactor introduce new accessors for
the VSH_OT_ARGV type which will return a NULL-terminated string list or
even a concatenated string for the given argument.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Peter Krempa [Tue, 12 Mar 2024 07:29:00 +0000 (08:29 +0100)]
vsh: Rework logic for picking which argument is to be completed
Currently the code decides which option to complete by looking into the
input string and trying to infer it based on whether we are at the
end position as we truncate the string to complete to the current cursor
position.
That basically means that only the last-parsed option will be up for
completion.
Replace the logic by remembering which is the last option rather than
using two different position checks and base the completion decision on
that and the actual value of the last argument (see comment).
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Peter Krempa [Tue, 26 Mar 2024 15:28:33 +0000 (16:28 +0100)]
vsh: Fix 'stdin' closing in 'cmdComplete'
While the 'complete' command is meant to be hidden and used only for
the completion script, there's nothing preventing it being used in all
virsh modes.
This poses a problem as the command tries to close 'stdin' to avoid the
possibility that an auth callback would want to read the password.
In interactive mode this immediately terminates virsh and in
non-interactive mode it attempts to close it multiple times if you use
virsh in batch mode.
Fix the issues by using virOnce() to close it exactly once and do so
only in non-interactive mode.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Peter Krempa [Thu, 25 Apr 2024 08:15:53 +0000 (10:15 +0200)]
vshReadlineInit: Initialize only once
'vshReadlineInit' is called when interactive virsh is started but also
on each call to 'cmdComplete'. Calling it repeatedly (using the
'complete' command interactively, or multiple times in batch mode) leaks
the buffers for history file configuration.
Avoid multiple setups of this function by returning success in case the
history file config is already present.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Thu, 25 Apr 2024 08:05:42 +0000 (10:05 +0200)]
vsh: cmdComplete: Don't leak buffer for completion
The buffer which we assign to the 'rl_line_buffer' variable of readline
would be overwritten and thus leaked on multiple invocations of
cmdComplete in one session.
Free/clear it after it's used.
Hitting this leak was until recenly possible only in non-interactive
batch mode and recently also in interactive mode as 'complete' can be
used multiple times now interactively.
Fixes: a0e1ada63c0afdc2af3b9405cbf637d8bd28700c Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Michal Privoznik [Wed, 24 Apr 2024 14:55:34 +0000 (16:55 +0200)]
virnetdevbandwidth.c: Put a limit to "quantum"
The "quantum" attribute of HTB is documented as:
Number of bytes to serve from this class before the scheduler
moves to the next class.
Since v1.3.2-rc1~225 we compute what we think is the appropriate
value and pass it on the TC command line. But kernel and
subsequently TC use uint32_t to store this value. If we compute
value outside of this type then TC fails and prints usage which
we then interpret as an error message. Needlessly long error
message. While there's not much we can do about the latter, we
can put a cap on the value and stop tickling this behavior of TC.
Fixes: 065054daa71f645fc83aff0271f194d326208616
Resolves: https://issues.redhat.com/browse/RHEL-34112 Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com>
test: nodedev: fill active_config at driver startup time
Commit v10.0.0-265-ge67bca23e4 added a `active_config` and
`defined_config` to nodedev mdev internal XML handling.
`defined_config` can be filled at XML parse time, but `active_config`
must be filled in by nodedev driver. This wasn't implemented for the
test driver however, which caused virt-manager test suite regressions.
There's already code that does what we want in the test suite.
Move it to a shared function, and call it in test driver when
creating a nodedev from driver startup XML.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
Cole Robinson [Fri, 22 Mar 2024 14:45:48 +0000 (10:45 -0400)]
test: make parsed nodedevs active and persistent
This was the implied default before nodedevs gained a notion of
being inactive and transient. It also matches the implied default
when parsing other object types
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
Peter Krempa [Wed, 3 Apr 2024 10:13:55 +0000 (12:13 +0200)]
virDomainDeviceIsUSB: Handle all USB devices and simplify the code
Rework 'virDomainUSBDeviceDefForeach' to use virDomainDeviceInfoIterate
instead of open-coding all iterators. To achieve this
'virDomainDeviceIsUSB' needs to be fixed as it didn't properly handle
'sound', 'fs', 'chr', 'ccid', and 'net' usb devices.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Peter Krempa [Wed, 3 Apr 2024 10:49:09 +0000 (12:49 +0200)]
docs: Rewrite documentation for network device models
Since libvirt now tries to interpret network device models (unless an
unknow model is used) the documentation didn't make a good job
specifying what is supported.
Rewrite the docs to explicitly list the models which we do parse.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
projects / libvirt.git / log