Commit 5cca30ebe089be23 ("drm/rcar-du: Add LVDS_LANES quirk") states
that LVDS lanes 1 and 3 are inverted on R-Car H2 ES1 only, and that the
problem has been fixed in newer revisions.
However, the code didn't take into account the actual hardware revision,
thus applying the quirk also on newer hardware revisions, causing green
color reversals.
Fix this by applying the quirk when running on R-Car H2 ES1.x only.
The software_node_get_parent() returned a pointer to the parent swnode,
but did not take a reference to it, leading the caller to put a reference
that was not taken. Take that reference now.
Fixes: 59abd83672f7 ("drivers: base: Introducing software nodes to the firmware node framework") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
I'm embarassed to say that even though I've touched
vop_crtc_mode_fixup() twice and I swear I tested it, there's still a
stupid glaring bug in it. Specifically, on veyron_minnie (with all
the latest display timings) we want to be setting our pixel clock to
66,666,666.67 Hz and we tell userspace that's what we set, but we're
actually choosing 66,000,000 Hz. This is confirmed by looking at the
clock tree.
The problem is that in drm_display_mode_from_videomode() we convert
from Hz to kHz with:
dmode->clock = vm->pixelclock / 1000;
...and drm_display_mode_from_videomode() is called from panel-simple
when we have an "override_mode" like we do on veyron_minnie. See
commit 123643e5c40a ("ARM: dts: rockchip: Specify
rk3288-veyron-minnie's display timings").
...so when the device tree specifies a clock of 66666667 for the panel
then DRM translates that to 66666000. The clock framework will always
pick a clock that is _lower_ than the one requested, so it will refuse
to pick 66666667 and we'll end up at 66000000.
While we could try to fix drm_display_mode_from_videomode() to round
to the nearest kHz and it would fix our problem, it wouldn't help if
the clock we actually needed was 60,000,001 Hz. We could
alternatively have DRM always round up, but maybe this would break
someone else who already baked in the assumption that DRM rounds down.
Specifically note that clock drivers are not consistent about whether
they round up or round down when you call clk_set_rate(). We know how
Rockchip's clock driver works, but (for instance) you can see that on
most Qualcomm clocks the default is clk_rcg2_ops which rounds up.
Let's solve this by just adding 999 Hz before calling
clk_round_rate(). This should be safe and work everywhere. As
discussed in more detail in comments in the commit, Rockchip's PLLs
are configured in a way that there shouldn't be another PLL setting
that is only a few kHz off so we won't get mixed up.
NOTE: if this is picked to stable, it's probably easiest to first pick
commit 527e4ca3b6d1 ("drm/rockchip: Base adjustments of the mode based
on prev adjustments") which shouldn't hurt in stable.
Commit 0ed266d7ae5e ("clk: ti: omap3: cleanup unnecessary clock aliases")
removed old omap3 clock framework aliases but caused omap3-rom-rng to
stop working with clock not found error.
Based on discussions on the mailing list it was requested by Tero Kristo
that it would be best to fix this issue by probing omap3-rom-rng using
device tree to provide a proper clk property. The other option would be
to add back the missing clock alias, but that does not help moving things
forward with removing old legacy platform_data.
Let's also add a proper device tree binding and keep it together with
the fix.
Cc: devicetree@vger.kernel.org Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Adam Ford <aford173@gmail.com> Cc: Pali Rohár <pali.rohar@gmail.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Sebastian Reichel <sre@kernel.org> Cc: Tero Kristo <t-kristo@ti.com> Fixes: 0ed266d7ae5e ("clk: ti: omap3: cleanup unnecessary clock aliases") Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
drivers/gpu/drm/amd/amdgpu/vcn_v2_5.c:431: warning: Excess function
parameter 'sw' description in 'vcn_v2_5_disable_clock_gating'
drivers/gpu/drm/amd/amdgpu/vcn_v2_5.c:550: warning: Excess function
parameter 'sw' description in 'vcn_v2_5_enable_clock_gating'
The "lvds->backlight" pointer could be NULL in situations where
of_parse_phandle() returns NULL. This code is cleaner if we use the
managed devm_of_find_backlight() so the clean up is automatic.
When modifying panfrost_devfreq_target() to support a device without a
regulator defined I missed the check on the error path. Let's add it.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: e21dd290881b ("drm/panfrost: Enable devfreq to work without regulator") Signed-off-by: Steven Price <steven.price@arm.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190822093218.26014-1-steven.price@arm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
When downloading the reserved page, the first page always contains
a beacon for the firmware to reference. For non-beaconing modes such
as station mode, also put a blank skb with length=1.
And for the beaconing modes, driver will get a real beacon with a
length approximate to the page size. But as the beacon is always put
at the first page, it does not need a tx_desc, because the TX path
will generate one when TXing the reserved page to the hardware. So we
could allocate a buffer with a size smaller than the reserved page,
when using memcpy() to copy the content of reserved page to the buffer,
the over-sized reserved page will violate the kernel memory.
To fix it, add the tx_desc before memcpy() the reserved packets to
the buffer, then we can get SKBs with correct length when counting
the pages in total. And for page 0, count the extra tx_desc_sz that
the TX path will generate. This way, the first beacon that allocated
without tx_desc can be counted with the extra tx_desc_sz to get
actual pages it requires.
Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver") Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since gpiochip_remove() calls gpiochip_remove_pin_ranges() unconditionally,
we have duplicate call to the same function when it's not necessary.
Move gpiochip_remove_pin_ranges() from of_gpiochip_add() to gpiochip_add()
to avoid duplicate calls and be consistent with the explicit call in
gpiochip_remove().
It turns out there really is something special to the first
set_next_task() invocation. In specific the 'change' pattern really
should not cause balance callbacks.
snoop_file_poll() is defined as returning 'unsigned int' but the
.poll method is declared as returning '__poll_t', a bitwise type.
Fix this by using the proper return type and using the EPOLL
constants instead of the POLL ones, as required for __poll_t.
Link: https://lore.kernel.org/r/20191121051851.268726-1-joel@jms.id.au Fixes: 3772e5da4454 ("drivers/misc: Aspeed LPC snoop output using misc chardev") Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the DTB for a device with an RZ/A2 SoC lacks a device node for the
BSID register, the ID validation code falls back to using a register at
address 0x0, which leads to undefined behavior (e.g. reading back a
random value).
This could be fixed by letting fam_rza2.reg point to the actual BSID
register. However, the hardcoded fallbacks were meant for backwards
compatibility with old DTBs only, not for new SoCs. Hence fix this by
validating renesas_family.reg before using it.
We'll end up with debugfs collisions if we don't give names to the
regmaps created by this driver. Change the name of the config before
registering it so we don't collide in debugfs.
Fixes: 7f9c136216c7 ("soc: qcom: Add broadcast base for Last Level Cache Controller (LLCC)") Cc: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org> Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Interrupts that don't have an associated wake event or GPIO wake events
end up with an associate IRQ chip that is NULL and which causes IRQ code
to crash. This is because we don't implicitly set the parent IRQ chip by
allocating the interrupt at the parent. However, there really isn't a
corresponding interrupt at the parent, so we need to work around this by
setting the special no_irq_chip as the IRQ chip for these interrupts.
The TLC chips actually offer 257 levels:
- 0: led OFF
- 1-255: Led dimmed is using a PWM. The duty cycle range from 0.4% to 99.6%
- 256: led fully ON
Fixes: e370d010a5fe ("leds: tlc591xx: Driver for the TI 8/16 Channel i2c LED driver") Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
At some point in the past we needed to make sure we would get the long
name of modules and not just what we get from /proc/modules, but that
need, as described in the cset that introduced the adjustment function:
Fixes: c03d5184f0e9 ("perf machine: Adjust dso->long_name for offline module")
Without using the buildid-cache:
# lsmod | grep trusted
# insmod trusted.ko
# lsmod | grep trusted
trusted 24576 0
# strace -e open,openat perf probe -m ./trusted.ko key_seal |& grep trusted
openat(AT_FDCWD, "/sys/module/trusted/notes/.note.gnu.build-id", O_RDONLY) = 4
openat(AT_FDCWD, "/sys/module/trusted/notes/.note.gnu.build-id", O_RDONLY) = 7
openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3
openat(AT_FDCWD, "/root/.debug/root/trusted.ko/dd3d355d567394d540f527e093e0f64b95879584/probes", O_RDWR|O_CREAT, 0644) = 3
openat(AT_FDCWD, "/usr/lib/debug/root/trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/lib/debug/root/trusted.ko", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/root/.debug/trusted.ko", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3
openat(AT_FDCWD, "trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, ".debug/trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3
openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3
openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 4
openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3
probe:key_seal (on key_seal in trusted)
# perf probe -l
probe:key_seal (on key_seal in trusted)
#
No attempt at opening '[trusted]'.
Now using the build-id cache:
# rmmod trusted
# perf buildid-cache --add ./trusted.ko
# insmod trusted.ko
# strace -e open,openat perf probe -m ./trusted.ko key_seal |& grep trusted
openat(AT_FDCWD, "/sys/module/trusted/notes/.note.gnu.build-id", O_RDONLY) = 4
openat(AT_FDCWD, "/sys/module/trusted/notes/.note.gnu.build-id", O_RDONLY) = 7
openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3
openat(AT_FDCWD, "/root/.debug/root/trusted.ko/dd3d355d567394d540f527e093e0f64b95879584/probes", O_RDWR|O_CREAT, 0644) = 3
openat(AT_FDCWD, "/usr/lib/debug/root/trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/lib/debug/root/trusted.ko", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/root/.debug/trusted.ko", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3
openat(AT_FDCWD, "trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, ".debug/trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3
openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3
openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 4
openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3
#
Again, no attempt at reading '[trusted]'.
Finally, adding a probe to that function and then using:
This was the only path I could find using the perf tools that reach at this
function, then as of november/2019, if we put a probe in the line where the
actuall setting of the dso->long_name is done:
To further test this I used kvm.ko as the offline module, i.e. removed
if from the buildid-cache by nuking it completely (rm -rf ~/.debug) and
moved it from the normal kernel distro path, removed the modules, stoped
the kvm guest, and then installed it manually, etc.
# rmmod kvm-intel
# rmmod kvm
# lsmod | grep kvm
# modprobe kvm-intel
modprobe: ERROR: ctx=0x55d3b1722260 path=/lib/modules/5.3.8-200.fc30.x86_64/kernel/arch/x86/kvm/kvm.ko.xz error=No such file or directory
modprobe: ERROR: ctx=0x55d3b1722260 path=/lib/modules/5.3.8-200.fc30.x86_64/kernel/arch/x86/kvm/kvm.ko.xz error=No such file or directory
modprobe: ERROR: could not insert 'kvm_intel': Unknown symbol in module, or unknown parameter (see dmesg)
# insmod ./kvm.ko
# modprobe kvm-intel
modprobe: ERROR: ctx=0x562f34026260 path=/lib/modules/5.3.8-200.fc30.x86_64/kernel/arch/x86/kvm/kvm.ko.xz error=No such file or directory
modprobe: ERROR: ctx=0x562f34026260 path=/lib/modules/5.3.8-200.fc30.x86_64/kernel/arch/x86/kvm/kvm.ko.xz error=No such file or directory
# lsmod | grep kvm
kvm_intel 299008 0
kvm 765952 1 kvm_intel
irqbypass 16384 1 kvm
#
# perf probe -x ~/bin/perf machine__findnew_module_map:12 mname=m.name:string filename=filename:string 'dso_long_name=map->dso->long_name:string' 'dso_name=map->dso->name:string'
# perf probe -l
probe_perf:machine__findnew_module_map (on machine__findnew_module_map:12@util/machine.c in /home/acme/bin/perf with mname filename dso_long_name dso_name)
# perf record
^C[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 3.416 MB perf.data (33956 samples) ]
# perf trace -e probe_perf:machine*
<SNIP>
6.322 perf/23099 probe_perf:machine__findnew_module_map(__probe_ip: 5492493, mname: "[salsa20_generic]", filename: "/lib/modules/5.3.8-200.fc30.x86_64/kernel/crypto/salsa20_generic.ko.xz", dso_long_name: "/lib/modules/5.3.8-200.fc30.x86_64/kernel/crypto/salsa20_generic.ko.xz", dso_name: "[salsa20_generic]")
6.375 perf/23099 probe_perf:machine__findnew_module_map(__probe_ip: 5492493, mname: "[kvm]", filename: "[kvm]", dso_long_name: "[kvm]", dso_name: "[kvm]")
<SNIP>
The filename doesn't come with the path, no point in trying to set the dso->long_name.
[root@quaco ~]# strace -e open,openat perf probe -m ./kvm.ko kvm_apic_local_deliver |& egrep 'open.*kvm'
openat(AT_FDCWD, "/sys/module/kvm_intel/notes/.note.gnu.build-id", O_RDONLY) = 4
openat(AT_FDCWD, "/sys/module/kvm/notes/.note.gnu.build-id", O_RDONLY) = 4
openat(AT_FDCWD, "/lib/modules/5.3.8-200.fc30.x86_64/kernel/arch/x86/kvm", O_RDONLY|O_NONBLOCK|O_CLOEXEC|O_DIRECTORY) = 7
openat(AT_FDCWD, "/sys/module/kvm_intel/notes/.note.gnu.build-id", O_RDONLY) = 8
openat(AT_FDCWD, "/root/kvm.ko", O_RDONLY) = 3
openat(AT_FDCWD, "/root/.debug/root/kvm.ko/5955f426cb93f03f30f3e876814be2db80ab0b55/probes", O_RDWR|O_CREAT, 0644) = 3
openat(AT_FDCWD, "/usr/lib/debug/root/kvm.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/lib/debug/root/kvm.ko", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/root/.debug/kvm.ko", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/root/kvm.ko", O_RDONLY) = 3
openat(AT_FDCWD, "kvm.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, ".debug/kvm.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "kvm.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/root/kvm.ko", O_RDONLY) = 3
openat(AT_FDCWD, "/root/kvm.ko", O_RDONLY) = 3
openat(AT_FDCWD, "/root/kvm.ko", O_RDONLY) = 4
openat(AT_FDCWD, "/root/kvm.ko", O_RDONLY) = 3
[root@quaco ~]#
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-jlfew3lyb24d58egrp0o72o2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch restores the CRYPTO_AES dependency. This is
necessary since some of the crypto4xx driver provided
modes need functioning software fallbacks for
AES-CTR/CCM and GCM.
Fixes: da3e7a9715ea ("crypto: amcc - switch to AES library for GCM key derivation") Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The legacy client tracking infrastructure of nfsd makes use of MD5 to
derive a client's recovery directory name. As the nfsd module doesn't
declare any dependency on CRYPTO_MD5, though, it may fail to allocate
the hash if the kernel was compiled without it. As a result, generation
of client recovery directories will fail with the following error:
NFSD: unable to generate recoverydir name
The explicit dependency on CRYPTO_MD5 was removed as redundant back in 6aaa67b5f3b9 (NFSD: Remove redundant "select" clauses in fs/Kconfig
2008-02-11) as it was already implicitly selected via RPCSEC_GSS_KRB5.
This broke when RPCSEC_GSS_KRB5 was made optional for NFSv4 in commit df486a25900f (NFS: Fix the selection of security flavours in Kconfig) at
a later point.
Fix the issue by adding back an explicit dependency on CRYPTO_MD5.
Fixes: df486a25900f (NFS: Fix the selection of security flavours in Kconfig) Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the case of an invalid virtchannel request the driver
would return uninitialized data to the VF from the PF stack
which is a bug. Fix by initializing the stack variable
earlier in the function before any return paths can be taken.
Fixes: 1071a8358a28 ("ice: Implement virtchnl commands for AVF support") Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Even if they are not currently used fix BK/BE endpoint definition order.
Fixes: b40b15e1521f ("mt76: add usb support to mt76 layer") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now phy-gmii-sel will disable MAC TX internal delay for PHY interface mode
"rgmii-rxid" which is incorrect.
Hence, fix it by enabling MAC TX internal delay in the case of "rgmii-rxid"
mode.
Commit 0fc9ae107669 ("net: phy: broadcom: add support for
BCM54210E") added support for BCM54210E but also unconditionally cleared
the RXC to RXD skew and the TXD to TXC skew, thus only making
PHY_INTERFACE_MODE_RGMII a possible configuration. Use
bcm54xx_config_clock_delay() which correctly sets the registers
depending on the 4 possible PHY interface values that exist for RGMII.
Fixes: 0fc9ae107669 ("net: phy: broadcom: add support for BCM54210E") Reported-by: Manasa Mudireddy <manasa.mudireddy@broadcom.com> Reported-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In function __tipc_shutdown(), the timeout value passed to
tipc_wait_for_cond() is not jiffies.
This commit fixes it by converting that value from milliseconds
to jiffies.
Fixes: 365ad353c256 ("tipc: reduce risk of user starvation during link congestion") Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When tipc_sk_timeout() is executed but user space is grabbing
ownership, this function rearms itself and returns. However, the
socket reference counter is not reduced. This causes potential
unexpected behavior.
This commit fixes it by calling sock_put() before tipc_sk_timeout()
returns in the above-mentioned case.
Fixes: afe8792fec69 ("tipc: refactor function tipc_sk_timeout()") Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When initiating a connection message to a server side, the connection
message is cloned and added to the socket write queue. However, if the
cloning is failed, only the socket write queue is purged. It causes
memory leak because the original connection message is not freed.
This commit fixes it by purging the list of connection message when
it cannot be cloned.
Fixes: 6787927475e5 ("tipc: buffer overflow handling in listener socket") Reported-by: Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In commit 25b0b9c4e835 ("tipc: handle collisions of 32-bit node address
hash values"), the 32-bit node address only generated after one second
trial period expired. However the self's addr in struct tipc_monitor do
not update according to node address generated. This lead to it is
always zero as initial value. As result, sorting algorithm using this
value does not work as expected, neither neighbor monitoring framework.
In this commit, we add a fix to update self's addr when 32-bit node
address generated.
Fixes: 25b0b9c4e835 ("tipc: handle collisions of 32-bit node address hash values") Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With huge cluster (e.g >200nodes), the amount of that flow:
gap -> retransmit packet -> acked will take time in case of STATE_MSG
dropped/delayed because a lot of traffic. This lead to 1.5 sec tolerance
value criteria made link easy failure around 2nd, 3rd of failed
retransmission attempts.
Instead of re-introduced criteria of 99 faled retransmissions to fix the
issue, we increase failure detection timer to ten times tolerance value.
Fixes: 77cf8edbc0e7 ("tipc: simplify stale link failure criteria") Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Acked-by: Jon Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
powerpc: Use hardware RNG for arch_get_random_seed_* not arch_get_random_*
updated arch_get_random_[int|long]() to be NOPs, and moved the hardware
RNG backing to arch_get_random_seed_[int|long]() instead. However, it
failed to take into account that arch_get_random_int() was implemented
in terms of arch_get_random_long(), and so we ended up with a version
of the former that is essentially a NOP as well.
Fix this by calling arch_get_random_seed_long() from
arch_get_random_seed_int() instead.
Fixes: 01c9348c7620ec65 ("powerpc: Use hardware RNG for arch_get_random_seed_* not arch_get_random_*") Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191204115015.18015-1-ardb@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
"powerpc_security_features" is "unsigned long", i.e. 32-bit or 64-bit,
depending on the platform (PPC_FSL_BOOK3E or PPC_BOOK3S_64). Hence
casting its address to "u64 *", and calling debugfs_create_x64() is
wrong, and leaks 32-bit of nearby data to userspace on 32-bit platforms.
While all currently defined SEC_FTR_* security feature flags fit in
32-bit, they all have "ULL" suffixes to make them 64-bit constants.
Hence fix the leak by changing the type of "powerpc_security_features"
(and the parameter types of its accessors) to "u64". This also allows
to drop the cast.
Fixes: 398af571128fe75f ("powerpc/security: Show powerpc_security_features in debugfs") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191021142309.28105-1-geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I noticed that for callback requests, the reported backlog latency
is always zero, and the rtt value is crazy big. The problem was that
rqst->rq_xtime is never set for backchannel requests.
Fixes: 78215759e20d ("SUNRPC: Make RTT measurement more ... ") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gss_read_proxy_verf() assumes things about the XDR buffer containing
the RPC Call that are not true for buffers generated by
svc_rdma_recv().
RDMA's buffers look more like what the upper layer generates for
sending: head is a kmalloc'd buffer; it does not point to a page
whose contents are contiguous with the first page in the buffers'
page array. The result is that ACCEPT_SEC_CONTEXT via RPC/RDMA has
stopped working on Linux NFS servers that use gssproxy.
This does not affect clients that use only TCP to send their
ACCEPT_SEC_CONTEXT operation (that's all Linux clients). Other
clients, like Solaris NFS clients, send ACCEPT_SEC_CONTEXT on the
same transport as they send all other NFS operations. Such clients
can send ACCEPT_SEC_CONTEXT via RPC/RDMA.
I thought I had found every direct reference in the server RPC code
to the rqstp->rq_pages field.
Bug found at the 2019 Westford NFS bake-a-thon.
Fixes: 3316f0631139 ("svcrdma: Persistently allocate and DMA- ... ") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Bill Baker <bill.baker@oracle.com> Reviewed-by: Simo Sorce <simo@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It turned out Intel Gemini Lake doesn't use the same I2C timing
parameters as Broxton.
I got confirmation from the Windows team that Gemini Lake systems should
use updated timing parameters that differ from those used in Broxton
based systems.
Fixes: f80e78aa11ad ("mfd: intel-lpss: Add Intel Gemini Lake PCI IDs") Tested-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix a typo in the free slave id search loop. Instead of I2C_CLIENT_PEC,
it should have been I2C_CLIENT_TEN. The slave id 1 can only handle 7-bit
addresses and thus is not eligible in case of 10-bit addresses.
As a matter of fact none of the slave id support I2C_CLIENT_PEC, overall
check is performed at the beginning of the stm32f7_i2c_reg_slave function.
The IP can handle two slave addresses. One address can either be
7 bits or 10 bits while the other can only be 7 bits.
In order to ensure that a 10 bits address can always be allocated
(assuming there is only one 7 bits address already allocated),
pick up the 7-bits only address slot in priority when performing a 7-bits
address allocation.
Flags passed to Q_XQUOTARM were not sanity checked for invalid values.
Fix that.
Fixes: 9da93f9b7cdf ("xfs: fix Q_XQUOTARM ioctl") Reported-by: Yang Xu <xuyang2018.jy@cn.fujitsu.com> Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A coccicheck run provided information like the following.
arch/arm/mach-omap2/display.c:268:2-8: ERROR: missing put_device;
call of_find_device_by_node on line 258, but without a corresponding
object release within this function.
With the removal of the panel-dpi from the omap drivers, the
LCD no longer works. This patch points the device tree to
a newly created panel named "logicpd,type28"
Fixes: 8bf4b1621178 ("drm/omap: Remove panel-dpi driver") Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the days of using bpf_load.c the order in which the 'maps' sections
were defines in BPF side (*_kern.c) file, were used by userspace side
to identify the map via using the map order as an index. In effect the
order-index is created based on the order the maps sections are stored
in the ELF-object file, by the LLVM compiler.
This have also carried over in libbpf via API bpf_map__next(NULL, obj)
to extract maps in the order libbpf parsed the ELF-object file.
When BTF based maps were introduced a new section type ".maps" were
created. I found that the LLVM compiler doesn't create the ".maps"
sections in the order they are defined in the C-file. The order in the
ELF file is based on the order the map pointer is referenced in the code.
This combination of changes lead to xdp_rxq_info mixing up the map
file-descriptors in userspace, resulting in very broken behaviour, but
without warning the user.
This patch fix issue by instead using bpf_object__find_map_by_name()
to find maps via their names. (Note, this is the ELF name, which can
be longer than the name the kernel retains).
Fixes: be5bca44aa6b ("samples: bpf: convert some XDP samples from bpf_load to libbpf") Fixes: 451d1dc886b5 ("samples: bpf: update map definition to new syntax BTF-defined map") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/157529025128.29832.5953245340679936909.stgit@firesoul Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since, the new syntax of BTF-defined map has been introduced,
the syntax for using maps under samples directory are mixed up.
For example, some are already using the new syntax, and some are using
existing syntax by calling them as 'legacy'.
As stated at commit abd29c931459 ("libbpf: allow specifying map
definitions using BTF"), the BTF-defined map has more compatablility
with extending supported map definition features.
The commit doesn't replace all of the map to new BTF-defined map,
because some of the samples still use bpf_load instead of libbpf, which
can't properly create BTF-defined map.
This will only updates the samples which uses libbpf API for loading bpf
program. (ex. bpf_prog_load_xattr)
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While trying to figure out why fentry_fexit selftest doesn't pass for me
(old pahole, broken BTF), I found out that my latest patch can break vmlinux
.BTF generation. objcopy preserves section start when doing --only-section,
so there is a chance (depending on where pahole inserts .BTF section) to
have leading empty zeroes. Let's explicitly force section offset to zero.
As part of this change, I'm also dropping '2>/dev/null' from objcopy
invocation to be able to catch possible other issues (objcopy doesn't
produce any warnings for me anymore, it did before with --dump-section).
Fixes: da5fb18225b4 ("bpf: Support pre-2.25-binutils objcopy for vmlinux BTF") Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Cc: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20191127225759.39923-1-sdf@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Perform size check always in btf__resolve_size. Makes the logic a bit more
robust against corrupted BTF and silences LGTM/Coverity complaining about
always true (size < 0) check.
Coverity scan against Github libbpf code found the issue of not freeing memory and
leaving already freed memory still referenced from bpf_program. Fix it by
re-assigning successfully reallocated memory sooner.
Fixes: 2993e0515bb4 ("tools/bpf: add support to read .BTF.ext sections") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20191107020855.3834758-2-andriin@fb.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the need_wakeup flag was added to AF_XDP, the format of the
XDP_MMAP_OFFSETS getsockopt was extended. Code was added to the
kernel to take care of compatibility issues arrising from running
applications using any of the two formats. However, libbpf was
not extended to take care of the case when the application/libbpf
uses the new format but the kernel only supports the old
format. This patch adds support in libbpf for parsing the old
format, before the need_wakeup flag was added, and emulating a
set of static need_wakeup flags that will always work for the
application.
v2 -> v3:
* Incorporated code improvements suggested by Jonathan Lemon
v1 -> v2:
* Rebased to bpf-next
* Rewrote the code as the previous version made you blind
Fixes: a4500432c2587cb2a ("libbpf: add support for need_wakeup flag in AF_XDP part") Reported-by: Eloy Degen <degeneloy@gmail.com> Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Link: https://lore.kernel.org/bpf/1571995035-21889-1-git-send-email-magnus.karlsson@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Get_pid_task() needs to be paired with a put_pid or we leak a pid
reference every time a banned client tries to create a context.
v2:
* task_pid_nr helper exists! (Chris)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Fixes: b083a0870c79 ("drm/i915: Add per client max context ban limit") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20191217170933.8108-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit ba16a48af797db124ac100417f9229b1650ce1fb) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Looking at the recent conversion from smp_processor_id() to
raw_smp_processor_id(), realized that the allocation should be based on the
cpu the hdwq is bound to, not the executing cpu.
Revise to pull cpu number from the hdwq
Fixes: 765ab6cdac3b ("scsi: lpfc: Fix a kernel warning triggered by lpfc_get_sgl_per_hdwq()") Link: https://lore.kernel.org/r/20191116003847.6141-1-jsmart2021@gmail.com Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
My earlier patch to just enable --reltime with --time was a little too
optimistic. The --time parsing would accept absolute time, which is
very confusing to the user.
Support relative time in --time parsing too. This only works with recent
perf record that records the first sample time. Otherwise we error out.
Fixes: 3714437d3fcc ("perf script: Allow --time with --reltime") Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Link: http://lore.kernel.org/lkml/20191011182140.8353-1-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The LED blink_set function incorrectly did not tell the PSU LED to blink
if brightness was LED_OFF. Fix this, and also correct the LED_OFF
command data, which should give control of the LED back to the PSU
firmware. Also prevent I2C failures from getting the driver LED state
out of sync and add some dev_dbg statements.
Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20191106200106.29519-3-eajames@linux.ibm.com Fixes: ef9e1cdf419a3 ("hwmon: (pmbus/cffps) Add led class device for power supply fault led") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since i2c_smbus functions can sleep, the brightness setting function
for this driver must be the blocking version to avoid scheduling while
atomic.
Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20191106200106.29519-2-eajames@linux.ibm.com Fixes: ef9e1cdf419a3 ("hwmon: (pmbus/cffps) Add led class device for power supply fault led") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Those regulators are not actually supported by the AB8500 regulator
driver. There is no ab8500_regulator_info for them and no entry in
ab8505_regulator_match.
As such, they cannot be registered successfully, and looking them
up in ab8505_regulator_match causes an out-of-bounds array read.
Fixes: 547f384f33db ("regulator: ab8500: add support for ab8505") Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20191106173125.14496-2-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the latest reference manual Rev.0,06/2019, the DDR clock mux
is extended to 2 bits, and the clock options are also changed,
correct them accordingly.
The original --reltime patch forbid --time with --reltime.
But it turns out --time doesn't really care about --reltime, because the
relative time is only used at final output, while the time filtering
always works earlier on absolute time.
So just remove the check and allow combining the two options.
Fixes: 90b10f47c0ee ("perf script: Support relative time") Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lore.kernel.org/lkml/20191002164642.1719-1-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since there are some DIE which has only ranges instead of the
combination of entrypc/highpc, address verification must use
dwarf_haspc() instead of dwarf_entrypc/dwarf_highpc.
Also, the ranges only DIE will have a partial code in different section
(e.g. unlikely code will be in text.unlikely as "FUNC.cold" symbol). In
that case, we can not use dwarf_entrypc() or die_entrypc(), because the
offset from original DIE can be a minus value.
Instead, this simply gets the symbol and offset from symtab.
Without this patch;
# perf probe -D clear_tasks_mm_cpumask:1
Failed to get entry address of clear_tasks_mm_cpumask
Error: Failed to add events.
The level of cckpd is from 0 to 4, and it is the index of
array pd_lvl[] and cs_lvl[]. However, the length of both arrays
are 4, which is smaller than the possible maximum input index.
Enumerate cck level to make sure the max level will not be wrong
if new level is added in future.
Many of the sgl-per-hdwq paths are locking with spin_lock_irq() and
spin_unlock_irq() and may unwittingly raising irq when it shouldn't. Hard
deadlocks were seen around lpfc_scsi_prep_cmnd().
Fix by converting the locks to irqsave/irqrestore.
Fixes: d79c9e9d4b3d ("scsi: lpfc: Support dynamic unbounded SGL lists on G7 hardware.") Link: https://lore.kernel.org/r/20190922035906.10977-16-jsmart2021@gmail.com Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In lpfc_release_io_buf, an lpfc_io_buf is returned to the 'available' pool
before any associated sgl or cmd and rsp buffers are returned via their
respective 'put' routines. If xri rebalancing occurs and an lpfc_io_buf
structure is reused quickly, there may be a race condition between release
of old and association of new resources.
Re-ordered lpfc_release_io_buf to release sgl and cmd/rsp
buffer lists before releasing the lpfc_io_buf structure for re-use.
Fixes: d79c9e9d4b3d ("scsi: lpfc: Support dynamic unbounded SGL lists on G7 hardware.") Link: https://lore.kernel.org/r/20190922035906.10977-17-jsmart2021@gmail.com Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes an unintended sign extension on left shifts. From Colin
King: "Shifting a u8 left will cause the value to be promoted to an
integer. If the top bit of the u8 is set then the following conversion to
an u64 will sign extend the value causing the upper 32 bits to be set in
the result."
Fix this by using get_unaligned_be*() instead.
Fixes: bf8162354233 ("[SCSI] add scsi trace core functions and put trace points") Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Link: https://lore.kernel.org/r/20191101211447.187151-1-bvanassche@acm.org Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In qla2x00_find_all_fabric_devs(), fcport->flags & FCF_LOGIN_NEEDED is a
necessary condition for logging into new rports, but not for dropping lost
ones.
Fixes: 726b85487067 ("qla2xxx: Add framework for async fabric discovery") Link: https://lore.kernel.org/r/20191122221912.20100-2-martin.wilck@suse.com Tested-by: David Bond <dbond@suse.com> Signed-off-by: Martin Wilck <mwilck@suse.com> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 4fa183455988 ("scsi: qla2xxx: Utilize pci_alloc_irq_vectors/
pci_free_irq_vectors calls.") use pci_alloc_irq_vectors() to replace
pci_enable_msi() but it didn't handle the return value correctly. This bug
make qla2x00 always fail to setup MSI if MSI-X fail, so fix it.
BTW, improve the log message of return value in qla2x00_request_irqs() to
avoid confusion.
Fixes: 4fa183455988 ("scsi: qla2xxx: Utilize pci_alloc_irq_vectors/pci_free_irq_vectors calls.") Cc: Michael Hernandez <michael.hernandez@cavium.com> Link: https://lore.kernel.org/r/1574314847-14280-1-git-send-email-chenhc@lemote.com Signed-off-by: Huacai Chen <chenhc@lemote.com> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It turns out that we don't clean up the request queue fully for bsg
devices, as the blk mq tags for the request queue are not freed.
Fix by doing the queue removal in one place - in sas_rphy_remove() -
instead of unregistering the queue in sas_rphy_remove() and finally
cleaning up the queue in calling blk_cleanup_queue() from
sas_end_device_release() or sas_expander_release().
Function bsg_remove_queue() can handle a NULL pointer q, so remove the
precheck in sas_rphy_remove().
Fixes: 651a013649943 ("scsi: scsi_transport_sas: switch to bsg-lib for SMP passthrough") Link: https://lore.kernel.org/r/1574242755-94156-1-git-send-email-john.garry@huawei.com Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: 73a4925d154c ("scsi: hisi_sas: Update all the registers after suspend and resume") Link: https://lore.kernel.org/r/1573551059-107873-3-git-send-email-john.garry@huawei.com Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Print the string for which conversion failed instead of printing the
function name twice.
Fixes: 2650d71e244f ("target: move transport ID handling to the core") Cc: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20191107215525.64415-1-bvanassche@acm.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The member hba->pcidev may be used after its reference is dropped. Move the
put function to where it is never used to avoid potential use after free
issues.
Fixes: a77171806515 ("[SCSI] bnx2i: Removed the reference to the netdev->base_addr") Link: https://lore.kernel.org/r/1573043541-19126-1-git-send-email-bianpan2016@163.com Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The variable init_fw_cb is released twice, resulting in a double free
bug. The call to the function dma_free_coherent() before goto is removed to
get rid of potential double free.
Fixes: 2a49a78ed3c8 ("[SCSI] qla4xxx: added IPv6 support.") Link: https://lore.kernel.org/r/1572945927-27796-1-git-send-email-bianpan2016@163.com Signed-off-by: Pan Bian <bianpan2016@163.com> Acked-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If set the BIST init value after enabling BIST, there may be still some few
error bits. According to the process, need to set the BIST init value
before enabling BIST.
Fixes: 97b151e75861 ("scsi: hisi_sas: Add BIST support for phy loopback") Link: https://lore.kernel.org/r/1571926105-74636-3-git-send-email-john.garry@huawei.com Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Due to a merge error, we attempt to create 2x debugfs dump folders, which
fails:
[ 861.101914] debugfs: Directory 'dump' with parent '0000:74:02.0'
already present!
This breaks the dump function.
To fix, remove the superfluous attempt to create the folder.
Fixes: 7ec7082c57ec ("scsi: hisi_sas: Add hisi_sas_debugfs_alloc() to centralise allocation") Link: https://lore.kernel.org/r/1571926105-74636-2-git-send-email-john.garry@huawei.com Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 60e4cf67a58 (reiserfs: fix extended attributes on the root
directory) introduced a regression open_xa_root started returning
-EOPNOTSUPP but it was not handled properly in reiserfs_for_each_xattr.
When the reiserfs module is built without CONFIG_REISERFS_FS_XATTR,
deleting an inode would result in a warning and chowning an inode
would also result in a warning and then fail to complete.
With CONFIG_REISERFS_FS_XATTR enabled, the xattr root would always be
present for read-write operations.
This commit handles -EOPNOSUPP in the same way -ENODATA is handled.
Fixes: 60e4cf67a582 ("reiserfs: fix extended attributes on the root directory") CC: stable@vger.kernel.org # Commit 60e4cf67a58 was picked up by stable Link: https://lore.kernel.org/r/20200115180059.6935-1-jeffm@suse.com Reported-by: Michael Brunnbauer <brunni@netestate.de> Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver *can* be a module, but then its parameters (socket path)
are untrusted data from inside the VM, and that isn't allowed. Allow
the code to only be built-in to avoid that.
Fixes: 5d38f324993f ("um: drivers: Add virtio vhost-user driver") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.co.uk> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the main() code, we eventually enable signals just before
exec() or exit(), in order to to not have signals pending and
delivered *after* the exec().
I've observed SIGSEGV loops at this point, and the reason seems
to be the irqflags tracing; this makes sense as the kernel is
no longer really functional at this point. Since there's really
no reason to use unblock_signals_trace() here (I had just done
a global search & replace), use the plain unblock_signals() in
this case to avoid going into the no longer functional kernel.
Fixes: 0dafcbe128d2 ("um: Implement TRACE_IRQFLAGS_SUPPORT") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit 4844ef80305d ("mtd: cfi_cmdset_0002: Add support for polling
status register") added checking for the status register error bits into
chip_good() to only return 1 if these bits are 0s. Unfortunately, this
means that polling using chip_good() always reaches a timeout condition
when erase or program failure bits are set. Let's fully delegate the task
of determining the error conditions to cfi_check_err_status() and make
chip_good() only look for the Device Ready/Busy condition.
Fixes: 4844ef80305d ("mtd: cfi_cmdset_0002: Add support for polling status register") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cypress S26K{L|S}P{128|256|512}S datasheet says that the error bits in
the status register are only valid when the "device ready" bit 7 is set.
Add the check for the device ready bit in cfi_check_err_status() as that
function isn't always called with this bit set.
Fixes: 4844ef80305d ("mtd: cfi_cmdset_0002: Add support for polling status register") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Due to the use of sizeof(), command size set for the spi transfer
was wrong. Driver was sending and receiving always 1 byte less
and especially on write, it was hanging.
echo -n -e "\\x1\\x2\\x3\\x4" > /dev/mtd1
And read part too now works as expected.
hexdump -C -n16 /dev/mtd1 00000000 01 02 03 04 ab f3 ad c2 ab e3 f4 36 dd 38 04 15 00000010
Fixes: 4379075a870b ("mtd: mchp23k256: Add support for mchp23lcv1024") Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 951d48855d86 ("of: Make of_dma_get_range() work on bus nodes")
reworked the logic such that of_dma_get_range() works correctly
starting from a bus node containing "dma-ranges".
Since on Juno we don't have a SoC level bus node and "dma-ranges" is
present only in the root node, we get the following error:
OF: translation of DMA address(0) to CPU address failed node(/sram@2e000000)
OF: translation of DMA address(0) to CPU address failed node(/uart@7ff80000)
...
OF: translation of DMA address(0) to CPU address failed node(/mhu@2b1f0000)
OF: translation of DMA address(0) to CPU address failed node(/iommu@2b600000)
OF: translation of DMA address(0) to CPU address failed node(/iommu@2b600000)
OF: translation of DMA address(0) to CPU address failed node(/iommu@2b600000)
So let's fix it by dropping the "dma-ranges" property for now. This
should be fine since it doesn't represent any kind of device-visible
restriction; it was only there for completeness, and we've since given
in to the assumption that missing "dma-ranges" implies a 1:1 mapping
anyway.
We can add it later with a proper SoC bus node and moving all the
devices that belong there along with the "dma-ranges" if required.
Looks like we've had the sgx sysconfig register and revision register
always wrong for omap4, including the old platform data. Let's fix the
offsets to what the TRM says. Otherwise the sgx module may never idle
depending on the state of the real sysconfig register.
Fixes: d23a163ebe5a ("ARM: dts: Add nodes for missing omap4 interconnect target modules") Cc: H. Nikolaus Schaller <hns@goldelico.com> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Older versions of the Juno *SoC* TRM [1] recommended that the UART clock
source should be 7.2738 MHz, whereas the *system* TRM [2] stated a more
correct value of 7.3728 MHz. Somehow the wrong value managed to end up in
our DT.
Doing a prime factorisation, a modulo divide by 115200 and trying
to buy a 7.2738 MHz crystal at your favourite electronics dealer suggest
that the old value was actually a typo. The actual UART clock is driven
by a PLL, configured via a parameter in some board.txt file in the
firmware, which reads 7.37 MHz (sic!).
Fix this to correct the baud rate divisor calculation on the Juno board.
The DRA7 CPSW MDIO functional clock (gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 0)
is specified incorrectly, which is caused incorrect MDIO bus clock
configuration MDCLK. The correct CPSW MDIO functional clock is
gmac_main_clk (125MHz), which is the same as CPSW fck. Hence fix it.
Fixes: 1faa415c9c6e ("ARM: dts: Add fck for cpsw mdio for omap variants") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As it was found recently, the Performance Monitoring Unit (PMU) on the
Allwinner A64 SoC was not generating (the right) interrupts. With the
SPI numbers from the manual the kernel did not receive any overflow
interrupts, so perf was not happy at all.
It turns out that the numbers were just off by 4, so the PMU interrupts
are from 148 to 151, not from 152 to 155 as the manual describes.
This was found by playing around with U-Boot, which typically does not
use interrupts, so the GIC is fully available for experimentation:
With *every* PPI and SPI enabled, an overflowing PMU cycle counter was
found to set a bit in one of the GICD_ISPENDR registers, with careful
counting this was determined to be number 148.
Tested with perf record and perf top on a Pine64-LTS. Also tested with
tasksetting to every core to confirm the assignment between IRQs and
cores.
This somewhat "revert-fixes" commit ed3e9406bcbc ("arm64: dts: allwinner:
a64: Drop PMU node").
Fixes: 34a97fcc71c2 ("arm64: dts: allwinner: a64: Add PMU node") Fixes: ed3e9406bcbc ("arm64: dts: allwinner: a64: Drop PMU node") Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The snvs-poweroff driver can power off the system by pulling the
PMIC_ON_REQ signal low, to let the PMIC disable the power.
The Kontron SoMs do not have this signal connected, so let's remove
the node.
This fixes a real issue when the signal is asserted at poweroff,
but not actually causing the power to turn off. It was observed,
that in this case the system would not shut down properly.
This is unused on cheza. Delete the node to get ride of the reserved-
memory section, and to avoid the driver from attempting to load a zap
shader that doesn't exist every time it powers up the GPU.
This also avoids a massive amount of dmesg spam about missing zap fw:
msm ae00000.mdss: [drm:adreno_request_fw] *ERROR* failed to load
qcom/a630_zap.mdt: -2
adreno 5000000.gpu: [drm:adreno_zap_shader_load] *ERROR* Unable to
load a630_zap.mdt
Signed-off-by: Rob Clark <robdclark@chromium.org> Cc: Douglas Anderson <dianders@chromium.org> Fixes: 3fdeaee951aa ("arm64: dts: sdm845: Add zap shader region for GPU") Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Andy Gross <agross@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / arm / linux.git / log