Luiz Capitulino [Thu, 10 Dec 2009 19:16:05 +0000 (17:16 -0200)]
migration: Convert do_info_migrate() to QObject
Return a QDict, which may contain up to more two QDicts, depending
on the type of migration we're performing.
IMPORTANT: as a QInt stores a int64_t integer, RAM values are going
to be stored as int64_t and not as uint64_t as they are today. If
this is a problem QInt will have to be changed.
This commit should not change user output.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Thu, 10 Dec 2009 19:15:58 +0000 (17:15 -0200)]
monitor: do_info_version(): Use QDict
All 'info' commands should use QDict, this commit also kills
monitor_print_qobject() as do_info_version() doesn't use it
anymore (and no handler will).
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Fri, 11 Dec 2009 10:25:07 +0000 (11:25 +0100)]
vnc: fix capslock tracking logic.
The capslock tracking logic added by commit 6b1325029d80455b9da7cd7bd84a88cb915b867c doesn't work correctly for vnc
clients without EXT_KEY_EVENT support. The reason is that qemu converts
keysyms for letters to lowercase for the keysym2scancode lookup. It
then also passes the lowercase value down to do_key_event(), but the
capslock tracking code needs it with the correct case to work properly.
This patch adds a new variable for the lowercase keysym so we'll keep
the unmodified value for do_key_event().
The keysym2scancode is not needed with EXT_KEY_EVENT capable clients
like any app based on the gtk-vnc widget, so I missed that case in
testing ...
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Thu, 10 Dec 2009 10:11:07 +0000 (11:11 +0100)]
scsi: fix drive hotplug.
This patch fills the DriveInfo->unit after hotplugging a scsi disk.
It makes a difference when auto-assigning a scsi id, where unit was
left filled with '-1' instead of the actual scsi id.
With this patch applied the the drive naming logic in drive_init() works
as good as it did in previous releases. Which means it works fine with
a single scsi bus.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Thu, 10 Dec 2009 10:11:06 +0000 (11:11 +0100)]
pci: don't hw_error() when no slot is available.
Current PCI code will simply hw_error() and thus abort in case no free
PCI slot is available or the requested PCI slot is already in use by
another device. For the hotplug case this behavior is not acceptable.
This patch makes qemu pass up the error properly, so the calling code
can decide whenever it wants to exit with an error (on startup) or
whenever it wants to continue (hotplug).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Thu, 10 Dec 2009 10:11:05 +0000 (11:11 +0100)]
pci: don't abort() when trying to hotplug with acpi off.
The PCI bus on x86 requires ACPI for hotplug support, thus disbling ACPI
also disables hotplug for the PCI bus. This patch makes qemu check
whenever the PCI bus in question can handle hotplug before trying to add
devices. This is needed because qdev will abort() on any attempt to
hotplug devices into a non-hotpluggable bus.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Tue, 8 Dec 2009 12:11:54 +0000 (13:11 +0100)]
Set default console to virtio on S390x
All "normal" system emulation targets in qemu I'm aware of display
output on either VGA or serial output.
Our S390x virtio machine doesn't have such kind of legacy hardware. So
instead we need to default to a virtio console.
Add flags to QEMUMachine to indicate which kind of default devices make
sense for the machine in question. Use it for S390x: enable virtcon,
disable serial, parallel and vga.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Tue, 8 Dec 2009 12:11:53 +0000 (13:11 +0100)]
default devices: virtio consoles.
This patch adds a variable default_virtcon which says whenever a default
virtio console should be added. It is disabled by default, followup
patch will enable it for s390. It is cleared when qemu finds
'-virtiocon', '-device virtio-console-s390' or '-device
virtio-console-pci' on the command line.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Tue, 8 Dec 2009 12:11:50 +0000 (13:11 +0100)]
rework -monitor handling, switch to QemuOpts
This patch reworks the -monitor handling:
- It adds a new "mon" QemuOpts list for the monitor(s).
- It adds a monitor_parse() function to parse the -monitor switch.
- It adds a mon_init function to initialize the monitor(s) from the
"mon" QemuOpts list.
- It winds up everything and removes the old bits.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Tue, 8 Dec 2009 12:11:48 +0000 (13:11 +0100)]
default devices: drives
Add a default_drive variable which specified whenever the default drives
(cdrom, floppy, sd) should be created. It is cleared when the new
-nodefaults switch is specified on the command line.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Tue, 8 Dec 2009 12:11:47 +0000 (13:11 +0100)]
default devices: network
Add a default_net variable which specified whenever a default network
should be created. It is cleared in case any -net option is specified
and it is also added to the new -nodefaults switch.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Tue, 8 Dec 2009 12:11:45 +0000 (13:11 +0100)]
default devices: vga adapter.
Qemu creates a vga display for you in case you didn't specify one on the
command line. Right now this is tied to the '-vga <type>' command line
switch, which in turn causes trouble if you are creating your gfx card
using '-device VGA,<props>'.
This patch adds a variable default_vga which says whenever a default
serial line should be added. It is enabled by default. It is cleared
when qemu finds '-vga' or '-device {VGA,Cirrus VGA,QEMUware SVGA}' on
the command line.
'-device VGA' still doesn't work though due to a initialization order
issue (vga must init before calling i440fx_init_memory_mappings).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Tue, 8 Dec 2009 12:11:43 +0000 (13:11 +0100)]
default devices: qemu monitor.
This patch makes the monitor default device configuration work like the
default serial and parallel port devices. It adds a variable
default_monitor which says whenever a default monitor should be added.
It is enabled by default. It is cleared when qemu finds '-monitor' on
the command line.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Tue, 8 Dec 2009 12:11:42 +0000 (13:11 +0100)]
default devices: parallel port.
Qemu creates a default parallel port for you in case you didn't specify
one on the command line. Right now this is tied to the '-parallel
<chardev>' command line switch, which in turn causes trouble if you are
creating your parallel port via '-device isa-parallel,<props>'.
This patch adds a variable default_parallel which says whenever a default
parallel port should be added. It is enabled by default. It is cleared
when qemu finds '-parallel' or '-device isa-parallel' on the command line.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Tue, 8 Dec 2009 12:11:41 +0000 (13:11 +0100)]
default devices: core code & serial lines.
Qemu creates a default serial line for you in case you didn't specify
one on the command line. Right now this is tied to the '-serial
<chardev>' command line switch, which in turn causes trouble if you are
creating your serial line via '-device isa-serial,<props>'.
This patch adds a variable default_serial which says whenever a default
serial line should be added. It is enabled by default. It is cleared
when qemu finds '-serial' or '-device isa-serial' on the command line.
Part of the patch is some infrastructure for the '-device $driver'
checking (default_driver_check function) which will also be used by the
other patches of this series.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Tue, 8 Dec 2009 12:11:34 +0000 (13:11 +0100)]
qdev: add command line option to set global defaults for properties.
This patch adds infrastructure and command line option for setting
global defaults for device properties, i.e. you can for example use
-global virtio-blk-pci.vectors=0
to turn off msi by default for all virtio block devices. The config
file syntax is:
[global]
driver = "virtio-blk-pci"
property = "vectors"
value = "0"
This can also be used to set properties for devices which are not
created via -device but implicitly via machine init, i.e.
-global isa-fdc,driveA=<name>
This patch uses the mechanism which configures properties for the
compatibility machine types (pc-0.10 & friends). The command line
takes precedence over the machine type values.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Tue, 8 Dec 2009 12:11:33 +0000 (13:11 +0100)]
qdev: make compat stuff more generic
This patch renames the compat properties into global properties and
makes them more generic. The compatibility stuff is only one of
multiple possible users now.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commits c7c338c4, 41471a23, 7a046f5f and a488be27 used
lower_case_with_underscores for class values. Existing usage
CamelCase. ChangeToThatForConsistency.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Device names with whitespace require quoting in the shell and in the
monitor. Some of the offenders are also overly long. Some have a
more convenient alias, some don't.
The place for verbose device names is DeviceInfo member desc. The
name should be short & sweet.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
qdev: Separate USB product description from qdev name
Using the qdev name for the product description makes for inconvenient
qdev names.
Put the product description in new USBDeviceInfo member product_desc.
Make usb_qdev_init() use it. No user or guest visible change, since
the value is still the same.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gleb Natapov [Tue, 8 Dec 2009 13:50:54 +0000 (15:50 +0200)]
fix rtc-td-hack on host without high-res timers
On hosts without high-res timers it is impossible to inject rtc interrupt
faster then 1kHz. Windows sometimes configures RTC to generate 1kHz
interrupts, so we can't inject missed interrupts when running on such
hosts. Always injecting an interrupt on REG_C read is also not an option
since Windows wait for REG_C to become zero with interrupt disabled
during boot. This patch uses mixed approach: accelerate timer + inject
up to 1000 interrupts on REG_C read.
Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
migrating between hosts which have different features
might break silently, if the migration destination
does not support some features supported by source.
Prevent this from happening by comparing acked feature
bits with the mask supported by the device.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Wed, 9 Dec 2009 18:59:36 +0000 (12:59 -0600)]
Do not abort on qemu_malloc(0) in production builds
qemu_malloc() does not allow size=0 to be passed in and aborts on this behavior.
Unfortunately, there is good reason to believe that within qemu, there are a
number of, so far, undetected places that assume size=0 can be safely passed.
Since we do not want to abort unnecessarily in production builds, return
qemu_malloc(1) whenever the version file indicates that this is a production
build.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This rearranges code in preparation for interrupt state
implementation.
Changes:
- split up bus walk away from interrupt handling
into a subroutine
- change irq_state from an array to bitmask
- verify that irq_state values are 0 or 1 on load
There are no functional changes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp>
Andre Przywara [Mon, 7 Dec 2009 10:58:02 +0000 (11:58 +0100)]
cpuid: Fix multicore setup on Intel
The multicore CPUID code detects whether the guest is an Intel or an
AMD CPU, because the Linux kernel is picky about the CmpLegacy bit.
KVM by default passes through the host's vendor, which was not
catched by the code. So fork out the vendor determining bits into a
separate function to be used from both places and always get the real
vendor.
This fixes KVM's multicore setup on Intel CPUs.
Signed-off-by: Andre Przywara <andre.przywara@amd.com> Reported-by: Dietmar Maurer <dietmar@proxmox.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Jan Kiszka [Sun, 6 Dec 2009 14:51:24 +0000 (15:51 +0100)]
kvm: x86: Fix initial kvm_has_msr_star
KVM_GET_MSR_INDEX_LIST returns -E2BIG when the provided space is too
small for all MSRs. But this is precisely the error we trigger with the
initial request in order to obtain that size. Do not fail in that case.
This caused a subtle corruption of the guest state as MSR_STAR was not
properly saved/restored. The corruption became visible with latest kvm
optimizing the MSR updates.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Alexander Graf [Sat, 5 Dec 2009 11:44:31 +0000 (12:44 +0100)]
Add S390 maintainer information
This patch adds information about who handles what when it comes to S390.
I'll gladly support anything that's related to the device emulation model and
S390 KVM parts.
Since this patchset doesn't implement S390 CPU emulation, I left that part
with a question mark. As soon as Uli's patchset gets committed I'd recommend
setting him there.
Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Alexander Graf [Sat, 5 Dec 2009 11:44:30 +0000 (12:44 +0100)]
Set default console to virtio on S390x
All "normal" system emulation targets in qemu I'm aware of display output
on either VGA or serial output.
Our S390x virtio machine doesn't have such kind of legacy hardware. So
instead we need to default to a virtio console.
I'm not particularly proud of this patch. It would be a lot better to
have something in the machine description that tells us about the default
terminal.
Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Alexander Graf [Sat, 5 Dec 2009 11:44:28 +0000 (12:44 +0100)]
Add S390x virtio machine description
In order to use the new S390x virtio bus we just introduced, we also
need a machine description that sets up the machine according to our
PV specification.
Let's add that machine description and be happy!
Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Alexander Graf [Sat, 5 Dec 2009 11:44:24 +0000 (12:44 +0100)]
Add KVM support for S390x
S390x was one of the first platforms that received support for KVM back in the
day. Unfortunately until now there hasn't been a qemu implementation that would
enable users to actually run guests.
So let's include support for KVM S390x in qemu!
Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Alexander Graf [Sat, 5 Dec 2009 11:44:23 +0000 (12:44 +0100)]
S/390 fake TCG implementation
Qemu won't let us run a KVM target without having host TCG support. Well, for
now we don't have any so let's implement a fake target that only stubs out
everything.
I tried to keep the patch as close to Uli's source as possible, so whenever
he feels like it he can easily diff his version against this one.
Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Alexander Graf [Sat, 5 Dec 2009 11:44:21 +0000 (12:44 +0100)]
S/390 CPU fake emulation
Because Qemu currently requires a TCG target to exist and there are quite some
useful helpers here to lay the groundwork for out KVM target, let's create a
stub TCG emulation target for S390X CPUs.
This is required to make tcg happy. The emulation target itself won't work
though.
Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
projects / qemu-upstream-4.6-testing.git / log