Jason Wang [Fri, 28 Oct 2022 06:14:36 +0000 (14:14 +0800)]
intel-iommu: PASID support
This patch introduce ECAP_PASID via "x-pasid-mode". Based on the
existing support for scalable mode, we need to implement the following
missing parts:
1) tag VTDAddressSpace with PASID and support IOMMU/DMA translation
with PASID
2) tag IOTLB with PASID
3) PASID cache and its flush
4) PASID based IOTLB invalidation
For simplicity PASID cache is not implemented so we can simply
implement the PASID cache flush as a no and leave it to be implemented
in the future. For PASID based IOTLB invalidation, since we haven't
had L1 stage support, the PASID based IOTLB invalidation is not
implemented yet. For PASID based device IOTLB invalidation, it
requires the support for vhost so we forbid enabling device IOTLB when
PASID is enabled now. Those work could be done in the future.
Note that though PASID based IOMMU translation is ready but no device
can issue PASID DMA right now. In this case, PCI_NO_PASID is used as
PASID to identify the address without PASID. vtd_find_add_as() has
been extended to provision address space with PASID which could be
utilized by the future extension of PCI core to allow device model to
use PASID based DMA translation.
This feature would be useful for:
1) prototyping PASID support for devices like virtio
2) future vPASID work
3) future PRS and vSVA work
Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221028061436.30093-5-jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jason Wang [Fri, 28 Oct 2022 06:14:35 +0000 (14:14 +0800)]
intel-iommu: convert VTD_PE_GET_FPD_ERR() to be a function
We used to have a macro for VTD_PE_GET_FPD_ERR() but it has an
internal goto which prevents it from being reused. This patch convert
that macro to a dedicated function and let the caller to decide what
to do (e.g using goto or not). This makes sure it can be re-used for
other function that requires fault reporting.
Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221028061436.30093-4-jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Jason Wang [Fri, 28 Oct 2022 06:14:34 +0000 (14:14 +0800)]
intel-iommu: drop VTDBus
We introduce VTDBus structure as an intermediate step for searching
the address space. This works well with SID based matching/lookup. But
when we want to support SID plus PASID based address space lookup,
this intermediate steps turns out to be a burden. So the patch simply
drops the VTDBus structure and use the PCIBus and devfn as the key for
the g_hash_table(). This simplifies the codes and the future PASID
extension.
To prevent being slower for past vtd_find_as_from_bus_num() callers, a
vtd_as cache indexed by the bus number is introduced to store the last
recent search result of a vtd_as belongs to a specific bus.
Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221028061436.30093-3-jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Jason Wang [Fri, 28 Oct 2022 06:14:33 +0000 (14:14 +0800)]
intel-iommu: don't warn guest errors when getting rid2pasid entry
We use to warn on wrong rid2pasid entry. But this error could be
triggered by the guest and could happens during initialization. So
let's don't warn in this case.
Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221028061436.30093-2-jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Cindy Lu [Mon, 31 Oct 2022 03:10:19 +0000 (11:10 +0800)]
vfio: move implement of vfio_get_xlat_addr() to memory.c
- Move the implement vfio_get_xlat_addr to softmmu/memory.c, and
change the name to memory_get_xlat_addr(). So we can use this
function on other devices, such as vDPA device.
- Add a new function vfio_get_xlat_addr in vfio/common.c, and it will check
whether the memory is backed by a discard manager. then device can
have its own warning.
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20221031031020.1405111-2-lulu@redhat.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Hesham Almatary <hesham.almatary@huawei.com>
Message-Id: <20221027100037.251-9-hesham.almatary@huawei.com> Tested-by: Yicong Yang <yangyicong@hisilicon.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Hesham Almatary [Thu, 27 Oct 2022 10:00:36 +0000 (11:00 +0100)]
tests: acpi: aarch64/virt: add a test for hmat nodes with no initiators
This patch imitates the "tests: acpi: q35: add test for hmat nodes
without initiators" commit to test numa nodes with different HMAT
attributes, but on AArch64/virt.
Signed-off-by: Hesham Almatary <hesham.almatary@huawei.com>
Message-Id: <20221027100037.251-8-hesham.almatary@huawei.com> Tested-by: Yicong Yang <yangyicong@hisilicon.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Xiang Chen [Thu, 27 Oct 2022 10:00:35 +0000 (11:00 +0100)]
hw/arm/virt: Enable HMAT on arm virt machine
Since the patchset ("Build ACPI Heterogeneous Memory Attribute Table (HMAT)"),
HMAT is supported, but only x86 is enabled. Enable HMAT on arm virt machine.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Hesham Almatary <hesham.almatary@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221027100037.251-7-hesham.almatary@huawei.com> Tested-by: Yicong Yang <yangyicong@hisilicon.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Hesham Almatary [Thu, 27 Oct 2022 10:00:34 +0000 (11:00 +0100)]
tests: Add HMAT AArch64/virt empty table files
Signed-off-by: Hesham Almatary <hesham.almatary@huawei.com>
Message-Id: <20221027100037.251-6-hesham.almatary@huawei.com> Tested-by: Yicong Yang <yangyicong@hisilicon.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Brice Goglin <Brice.Goglin@inria.fr> Signed-off-by: Hesham Almatary <hesham.almatary@huawei.com>
Message-Id: <20221027100037.251-5-hesham.almatary@huawei.com> Tested-by: Yicong Yang <yangyicong@hisilicon.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Brice Goglin <Brice.Goglin@inria.fr> Signed-off-by: Hesham Almatary <hesham.almatary@huawei.com>
Message-Id: <20221027100037.251-4-hesham.almatary@huawei.com> Tested-by: Yicong Yang <yangyicong@hisilicon.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Brice Goglin [Thu, 27 Oct 2022 10:00:31 +0000 (11:00 +0100)]
tests: acpi: add and whitelist *.hmat-noinitiator expected blobs
.. which will be used by follow up hmat-noinitiator test-case.
Signed-off-by: Brice Goglin <Brice.Goglin@inria.fr> Signed-off-by: Hesham Almatary <hesham.almatary@huawei.com>
Message-Id: <20221027100037.251-3-hesham.almatary@huawei.com> Tested-by: Yicong Yang <yangyicong@hisilicon.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Brice Goglin [Thu, 27 Oct 2022 10:00:30 +0000 (11:00 +0100)]
hmat acpi: Don't require initiator value in -numa
The "Memory Proximity Domain Attributes" structure of the ACPI HMAT
has a "Processor Proximity Domain Valid" flag that is currently
always set because Qemu -numa requires an initiator=X value
when hmat=on. Unsetting this flag allows to create more complex
memory topologies by having multiple best initiators for a single
memory target.
This patch allows -numa without initiator=X when hmat=on by keeping
the default value MAX_NODES in numa_state->nodes[i].initiator.
All places reading numa_state->nodes[i].initiator already check
whether it's different from MAX_NODES before using it.
Tested with
qemu-system-x86_64 -accel kvm \
-machine pc,hmat=on \
-drive if=pflash,format=raw,file=./OVMF.fd \
-drive media=disk,format=qcow2,file=efi.qcow2 \
-smp 4 \
-m 3G \
-object memory-backend-ram,size=1G,id=ram0 \
-object memory-backend-ram,size=1G,id=ram1 \
-object memory-backend-ram,size=1G,id=ram2 \
-numa node,nodeid=0,memdev=ram0,cpus=0-1 \
-numa node,nodeid=1,memdev=ram1,cpus=2-3 \
-numa node,nodeid=2,memdev=ram2 \
-numa hmat-lb,initiator=0,target=0,hierarchy=memory,data-type=access-latency,latency=10 \
-numa hmat-lb,initiator=0,target=0,hierarchy=memory,data-type=access-bandwidth,bandwidth=10485760 \
-numa hmat-lb,initiator=0,target=1,hierarchy=memory,data-type=access-latency,latency=20 \
-numa hmat-lb,initiator=0,target=1,hierarchy=memory,data-type=access-bandwidth,bandwidth=5242880 \
-numa hmat-lb,initiator=0,target=2,hierarchy=memory,data-type=access-latency,latency=30 \
-numa hmat-lb,initiator=0,target=2,hierarchy=memory,data-type=access-bandwidth,bandwidth=1048576 \
-numa hmat-lb,initiator=1,target=0,hierarchy=memory,data-type=access-latency,latency=20 \
-numa hmat-lb,initiator=1,target=0,hierarchy=memory,data-type=access-bandwidth,bandwidth=5242880 \
-numa hmat-lb,initiator=1,target=1,hierarchy=memory,data-type=access-latency,latency=10 \
-numa hmat-lb,initiator=1,target=1,hierarchy=memory,data-type=access-bandwidth,bandwidth=10485760 \
-numa hmat-lb,initiator=1,target=2,hierarchy=memory,data-type=access-latency,latency=30 \
-numa hmat-lb,initiator=1,target=2,hierarchy=memory,data-type=access-bandwidth,bandwidth=1048576
which reports NUMA node2 at same distance from both node0 and node1 as seen in lstopo:
Machine (2966MB total) + Package P#0
NUMANode P#2 (979MB)
Group0
NUMANode P#0 (980MB)
Core P#0 + PU P#0
Core P#1 + PU P#1
Group0
NUMANode P#1 (1007MB)
Core P#2 + PU P#2
Core P#3 + PU P#3
Before this patch, we had to add ",initiator=X" to "-numa node,nodeid=2,memdev=ram2".
The lstopo output difference between initiator=1 and no initiator is:
@@ -1,10 +1,10 @@
Machine (2966MB total) + Package P#0
+ NUMANode P#2 (979MB)
Group0
NUMANode P#0 (980MB)
Core P#0 + PU P#0
Core P#1 + PU P#1
Group0
NUMANode P#1 (1007MB)
- NUMANode P#2 (979MB)
Core P#2 + PU P#2
Core P#3 + PU P#3
Signed-off-by: Brice Goglin <Brice.Goglin@inria.fr> Signed-off-by: Hesham Almatary <hesham.almatary@huawei.com> Reviewed-by: Jingqi Liu <jingqi.liu@intel.com>
Message-Id: <20221027100037.251-2-hesham.almatary@huawei.com> Tested-by: Yicong Yang <yangyicong@hisilicon.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Bernhard Beschow [Fri, 28 Oct 2022 10:34:19 +0000 (12:34 +0200)]
hw/i386/acpi-build: Resolve north rather than south bridges
The code currently assumes Q35 iff ICH9 and i440fx iff PIIX. Now that more
AML generation has been moved into the south bridges and since the
machines define themselves primarily through their north bridges, let's
switch to resolving the north bridges for AML generation instead. This
also allows for easier experimentation with different south bridges in
the "pc" machine, e.g. with PIIX4 and VT82xx.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20221028103419.93398-4-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Bernhard Beschow [Fri, 28 Oct 2022 10:34:18 +0000 (12:34 +0200)]
hw/i386/acpi-build: Resolve redundant attribute
The is_piix4 attribute is set once in one location and read once in
another. Doing both in one location allows for removing the attribute
altogether.
Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221026133110.91828-3-shentey@gmail.com>
Message-Id: <20221028103419.93398-3-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221026133110.91828-2-shentey@gmail.com>
Message-Id: <20221028103419.93398-2-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Gregory Price [Wed, 26 Oct 2022 20:59:13 +0000 (16:59 -0400)]
hw/i386/pc.c: CXL Fixed Memory Window should not reserve e820 in bios
Early-boot e820 records will be inserted by the bios/efi/early boot
software and be reported to the kernel via insert_resource. Later, when
CXL drivers iterate through the regions again, they will insert another
resource and make the RESERVED memory area a child.
This RESERVED memory area causes the memory region to become unusable,
and as a result attempting to create memory regions with
`cxl create-region ...`
Will fail due to the RESERVED area intersecting with the CXL window.
During boot the following traceback is observed:
0xffffffff81101650 in insert_resource_expand_to_fit ()
0xffffffff83d964c5 in e820__reserve_resources_late ()
0xffffffff83e03210 in pcibios_resource_survey ()
0xffffffff83e04f4a in pcibios_init ()
Which produces a call to reserve the CFMWS area:
(gdb) p *new
$54 = {start = 0x290000000, end = 0x2cfffffff, name = "Reserved",
flags = 0x200, desc = 0x7, parent = 0x0, sibling = 0x0,
child = 0x0}
Later the Kernel parses ACPI tables and reserves the exact same area as
the CXL Fixed Memory Window:
0xffffffff811016a4 in insert_resource_conflict ()
insert_resource ()
0xffffffff81a81389 in cxl_parse_cfmws ()
0xffffffff818c4a81 in call_handler ()
acpi_parse_entries_array ()
This reserved area causes `get_free_mem_region()` to fail due to a check
against `__region_intersects()`. Due to this reserved area, the
intersect check will only ever return REGION_INTERSECTS, which causes
`cxl create-region` to always fail.
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Message-Id: <20221026205912.8579-1-gregory.price@memverge.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Akihiko Odaki [Mon, 29 Aug 2022 08:35:24 +0000 (17:35 +0900)]
msix: Assert that specified vector is in range
There were several different ways to deal with the situation where the
vector specified for a msix function is out of bound:
- early return a function and keep progresssing
- propagate the error to the caller
- mark msix unusable
- assert it is in bound
- just ignore
An out-of-bound vector should not be specified if the device
implementation is correct so let msix functions always assert that the
specified vector is in range.
An exceptional case is virtio-pci, which allows the guest to configure
vectors. For virtio-pci, it is more appropriate to introduce its own
checks because it is sometimes too late to check the vector range in
msix functions.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20220829083524.143640-1-akihiko.odaki@daynix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Yuval Shaia <yuval.shaia.ml@gmail.com> Signed-off-by: Akihiko Odaki <<a href="mailto:akihiko.odaki@daynix.com" target="_blank">akihiko.odaki@daynix.com</a>><br>
MAINTAINERS: Add qapi/virtio.json to section "virtio"
Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221020120458.80709-1-armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
- Fix memset argument order: The second argument is
the value, the length goes last.
- Fix an integer overflow reported by Alexander Bulekov.
Both issues allow the guest to overrun the host buffer
allocated for the ERST memory device.
Cc: Eric DeVolder <eric.devolder@oracle.com Cc: Alexander Bulekov <alxndr@bu.edu> Cc: qemu-stable@nongnu.org Fixes: f7e26ffa590 ("ACPI ERST: support for ACPI ERST feature") Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Message-Id: <20221024154233.1043347-1-lk@c--e.de> Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1268 Reviewed-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 17 Oct 2022 10:21:45 +0000 (12:21 +0200)]
acpi: pc/35: sanitize _GPE declaration order
Move _GPE block declaration before it gets referenced by other
hotplug handlers. While at it move PCI hotplug (_E01) handler
after PCI tree description to avoid forward reference to
to not yet declared methods/devices.
PS:
Forward 'usage' usualy is fine as long as it's hidden within
method, however 'iasl' may print warnings. So be nice
to iasl/guest OS and do things in proper order.
PS2: Also follow up patches will move some of hotplug code
from PCI tree to _E01 and that also requires PCI Device
nodes build first, before Scope can reuse that from
global context.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221017102146.2254096-11-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 17 Oct 2022 10:21:44 +0000 (12:21 +0200)]
tests: acpi: pc/q35 whitelist DSDT before \_GPE cleanup
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221017102146.2254096-10-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Also for ipmismbus test, child 'Device (MI1)' of SMB0 will be moved along with it
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221017102146.2254096-9-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 17 Oct 2022 10:21:42 +0000 (12:21 +0200)]
acpi: enumerate SMB bridge automatically along with other PCI devices
to make that happen (bridge sits at _ADR: 0x001F0003),
relax PCI enumeration logic to include devices with *function* > 0
if device has something to say about itself (i.e. has build_dev_aml
callback set).
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221017102146.2254096-8-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 17 Oct 2022 10:21:41 +0000 (12:21 +0200)]
acpi: add get_dev_aml_func() helper
It will be used in followup commits to figure out if
device has it's own, device specific AML block.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221017102146.2254096-7-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Ani Sinha <ani@anisinha.ca>
Igor Mammedov [Mon, 17 Oct 2022 10:21:40 +0000 (12:21 +0200)]
tests: acpi: whitelist DSDT before generating ICH9_SMB AML automatically
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221017102146.2254096-6-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- Field (PCI0.ISA.PIRQ, ByteAcc, NoLock, Preserve)
+ Field (SF8.PIRQ, ByteAcc, NoLock, Preserve)
and bridge address
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221017102146.2254096-5-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 17 Oct 2022 10:21:38 +0000 (12:21 +0200)]
acpi: pc/q35: drop ad-hoc PCI-ISA bridge AML routines and let bus ennumeration generate AML
PCI-ISA bridges that are built in PIIX/Q35 are building its own AML
using AcpiDevAmlIf interface. Now build_append_pci_bus_devices()
gained AcpiDevAmlIf interface support to get AML of devices atached
to PCI slots.
So drop ad-hoc build_q35_isa_bridge()/build_piix4_isa_bridge()
and let PCI bus enumeration to include PCI-ISA bridge AML
when it's enumerated by build_append_pci_bus_devices().
AML change is mostly contextual, which moves whole ISA hierarchy
directly under PCI host bridge instead of it being described
as separate \SB.PCI0.ISA block.
Note:
If bus/slot that hosts ISA bridge has BSEL set, it will gain new
ASUN and _DMS entries (i.e. acpi-index support, but it should not
cause any functional change and that is fine from PCI Firmware
spec point of view), potentially it's possible to suppress that
by adding a flag to PCIDevice but I don't see a reason to do that
yet, I'd rather treat bridge just as any other PCI device if it's
possible.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221017102146.2254096-4-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 17 Oct 2022 10:21:37 +0000 (12:21 +0200)]
tests: acpi: whitelist DSDT before generating PCI-ISA bridge AML automatically
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221017102146.2254096-3-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 17 Oct 2022 10:21:36 +0000 (12:21 +0200)]
acpi: pc: vga: use AcpiDevAmlIf interface to build VGA device descriptors
NB:
We do not expect any functional change in any ACPI tables with this
change. It's only a refactoring.
NB2:
Some targets (or1k) do not support acpi and CONFIG_ACPI is off for them.
However, modules are reused between all architectures so CONFIG_ACPI is
on. For those architectures, dummy stub function definitions help to
resolve symbols. This change uses more of these and so it adds a couple
of dummy stub definitions so that symbols for those can be resolved.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221017102146.2254096-2-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Ani Sinha <ani@anisinha.ca> CC: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20221107152744.868434-1-ani@anisinha.ca>
Yajun Wu [Tue, 18 Oct 2022 02:36:51 +0000 (10:36 +0800)]
vhost-user: Fix out of order vring host notification handling
vhost backend sends host notification for every VQ. If backend creates
VQs in parallel, the VHOST_USER_SLAVE_VRING_HOST_NOTIFIER_MSG may
arrive to QEMU in different order than incremental queue index order.
For example VQ 1's message arrive earlier than VQ 0's:
After alloc VhostUserHostNotifier for VQ 1. GPtrArray becomes
[ nil, VQ1 pointer ]
After alloc VhostUserHostNotifier for VQ 0. GPtrArray becomes
[ VQ0 pointer, nil, VQ1 pointer ]
This is wrong. fetch_notifier will return NULL for VQ 1 in
vhost_user_get_vring_base, causes host notifier miss removal(leak).
The fix is to remove current element from GPtrArray, make the right
position for element to insert.
Fixes: 503e355465 ("virtio/vhost-user: dynamically assign VhostUserHostNotifiers") Signed-off-by: Yajun Wu <yajunw@nvidia.com> Acked-by: Parav Pandit <parav@nvidia.com>
Message-Id: <20221018023651.1359420-1-yajunw@nvidia.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
David Daney [Fri, 14 Oct 2022 16:09:47 +0000 (18:09 +0200)]
virtio-rng-pci: Allow setting nvectors, so we can use MSI-X
Most other virtio-pci devices allow MSI-X, let's have it for rng too.
Signed-off-by: David Daney <david.daney@fungible.com> Reviewed-by: Marcin Nowakowski <marcin.nowakowski@fungible.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@fungible.com>
Message-Id: <20221014160947.66105-1-philmd@fungible.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Xuan Zhuo [Mon, 17 Oct 2022 09:25:58 +0000 (17:25 +0800)]
virtio-net: enable vq reset feature
Add virtqueue reset feature for virtio-net
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Message-Id: <20221017092558.111082-16-xuanzhuo@linux.alibaba.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Kangjie Xu [Mon, 17 Oct 2022 09:25:57 +0000 (17:25 +0800)]
vhost: vhost-kernel: enable vq reset feature
Add virtqueue reset feature for vhost-kernel.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com> Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-15-xuanzhuo@linux.alibaba.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Kangjie Xu [Mon, 17 Oct 2022 09:25:56 +0000 (17:25 +0800)]
virtio-net: support queue_enable
Support queue_enable in vhost-kernel scenario. It can be called when
a vq reset operation has been performed and the vq is restared.
It should be noted that we can restart the vq when the vhost has
already started. When launching a new vhost device, the vhost is not
started and all vqs are not initalized until VIRTIO_PCI_COMMON_STATUS
is written. Thus, we should use vhost_started to differentiate the
two cases: vq reset and device start.
Currently it only supports vhost-kernel.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com> Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-14-xuanzhuo@linux.alibaba.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Xuan Zhuo [Mon, 17 Oct 2022 09:25:55 +0000 (17:25 +0800)]
virtio-net: support queue reset
virtio-net and vhost-kernel implement queue reset.
Queued packets in the corresponding queue pair are flushed
or purged.
For virtio-net, userspace datapath will be disabled later in
__virtio_queue_reset(). It will set addr of vring to 0 and idx to 0.
Thus, virtio_net_receive() and virtio_net_flush_tx() will not receive
or send packets.
For vhost-net, the datapath will be disabled in vhost_net_virtqueue_reset().
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-13-xuanzhuo@linux.alibaba.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce the fucntion flush_or_purge_queued_packets(), it will be
used in device reset and virtqueue reset. Therefore, we extract the
common logic as a new function.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com> Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-12-xuanzhuo@linux.alibaba.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce vhost_net_virtqueue_restart(), which can restart the
specific virtqueue when the vhost net started running before.
If it fails to restart the virtqueue, the device will be stopped.
Here we do not reuse vhost_net_start_one() or vhost_dev_start()
because they work at queue pair level. The mem table and features
do not change, so we can call the vhost_virtqueue_start() to
restart a specific queue.
This patch only considers the case of vhost-kernel, when
NetClientDriver is NET_CLIENT_DRIVER_TAP.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com> Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-11-xuanzhuo@linux.alibaba.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce vhost_virtqueue_reset(), which can reset the specific
virtqueue in the device. Then it will unmap vrings and the desc
of the virtqueue.
Here we do not reuse the vhost_net_stop_one() or vhost_dev_stop(),
because they work at queue pair level. We do not use
vhost_virtqueue_stop() because it may stop the device in the
backend.
This patch only considers the case of vhost-kernel, when
NetClientDriver is NET_CLIENT_DRIVER_TAP.
Furthermore, we do not need net->nc->info->poll() because
it enables userspace datapath and we want to stop all
datapaths for this reset virtqueue here.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com> Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-10-xuanzhuo@linux.alibaba.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Kangjie Xu [Mon, 17 Oct 2022 09:25:51 +0000 (17:25 +0800)]
vhost: expose vhost_virtqueue_stop()
Expose vhost_virtqueue_stop(), we need to use it when resetting a
virtqueue.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com> Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-9-xuanzhuo@linux.alibaba.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Kangjie Xu [Mon, 17 Oct 2022 09:25:50 +0000 (17:25 +0800)]
vhost: expose vhost_virtqueue_start()
Expose vhost_virtqueue_start(), we need to use it when restarting a
virtqueue.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com> Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-8-xuanzhuo@linux.alibaba.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Kangjie Xu [Mon, 17 Oct 2022 09:25:49 +0000 (17:25 +0800)]
virtio-pci: support queue enable
PCI devices support device specific vq enable.
Based on this function, the driver can re-enable the virtqueue after the
virtqueue is reset.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com> Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-7-xuanzhuo@linux.alibaba.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Xuan Zhuo [Mon, 17 Oct 2022 09:25:48 +0000 (17:25 +0800)]
virtio-pci: support queue reset
PCI devices support vq reset.
Based on this function, the driver can adjust the size of the ring, and
quickly recycle the buffer in the ring.
The migration of the virtio devices will not happen during a reset
operation. This is becuase the global iothread lock is held. Migration
thread also needs the lock. As a result, when migration of virtio
devices starts, the 'reset' status of VirtIOPCIQueue will always be 0.
Thus, we do not need to add it in vmstate_virtio_pci_modern_queue_state.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-6-xuanzhuo@linux.alibaba.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Kangjie Xu [Mon, 17 Oct 2022 09:25:47 +0000 (17:25 +0800)]
virtio: core: vq reset feature negotation support
A a new command line parameter "queue_reset" is added.
Meanwhile, the vq reset feature is disabled for pre-7.2 machines.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com> Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-5-xuanzhuo@linux.alibaba.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Kangjie Xu [Mon, 17 Oct 2022 09:25:46 +0000 (17:25 +0800)]
virtio: introduce virtio_queue_enable()
Introduce the interface queue_enable() in VirtioDeviceClass and the
fucntion virtio_queue_enable() in virtio, it can be called when
VIRTIO_PCI_COMMON_Q_ENABLE is written and related virtqueue can be
started. It only supports the devices of virtio 1 or later. The
not-supported devices can only start the virtqueue when DRIVER_OK.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com> Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-4-xuanzhuo@linux.alibaba.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Xuan Zhuo [Mon, 17 Oct 2022 09:25:45 +0000 (17:25 +0800)]
virtio: introduce virtio_queue_reset()
Introduce a new interface function virtio_queue_reset() to implement
reset for vq.
Add a new callback to VirtioDeviceClass for queue reset operation for
each child device.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-3-xuanzhuo@linux.alibaba.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Xuan Zhuo [Mon, 17 Oct 2022 09:25:44 +0000 (17:25 +0800)]
virtio: introduce __virtio_queue_reset()
Separate the logic of vq reset. This logic will be called directly
later.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-2-xuanzhuo@linux.alibaba.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Eric Auger [Wed, 12 Oct 2022 16:34:48 +0000 (12:34 -0400)]
hw/virtio/virtio-iommu-pci: Enforce the device is plugged on the root bus
In theory the virtio-iommu-pci could be plugged anywhere in the PCIe
topology and as long as the dt/acpi info are properly built this should
work. However at the moment we fail to do that because the
virtio-iommu-pci BDF is not computed at plug time and in that case
vms->virtio_iommu_bdf gets an incorrect value.
For instance if the virtio-iommu-pci is plugged onto a pcie root port
and the virtio-iommu protects a virtio-block-pci device the guest does
not boot.
So let's do not pretend we do support this case and fail the initialize()
if we detect the virtio-iommu-pci is plugged anywhere else than on the
root bus. Anyway this ability is not needed.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20221012163448.121368-1-eric.auger@redhat.com> Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jonathan Cameron [Fri, 14 Oct 2022 15:10:45 +0000 (16:10 +0100)]
hw/pci-bridge/cxl-upstream: Add a CDAT table access DOE
This Data Object Exchange Mailbox allows software to query the
latency and bandwidth between ports on the switch. For now
only provide information on routes between the upstream port and
each downstream port (not p2p).
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
--
Changes since v8: Mostly to match the type 3 equivalent
- Move enum out of function and give it a more descriptive namespace.
Message-Id: <20221014151045.24781-6-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Huai-Cheng Kuo [Fri, 14 Oct 2022 15:10:44 +0000 (16:10 +0100)]
hw/mem/cxl-type3: Add CXL CDAT Data Object Exchange
The CDAT can be specified in two ways. One is to add ",cdat=<filename>"
in "-device cxl-type3"'s command option. The file is required to provide
the whole CDAT table in binary mode. The other is to use the default
that provides some 'reasonable' numbers based on type of memory and
size.
The DOE capability supporting CDAT is added to hw/mem/cxl_type3.c with
capability offset 0x190. The config read/write to this capability range
can be generated in the OS to request the CDAT data.
Signed-off-by: Huai-Cheng Kuo <hchkuo@avery-design.com.tw> Signed-off-by: Chris Browy <cbrowy@avery-design.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20221014151045.24781-5-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Huai-Cheng Kuo [Fri, 14 Oct 2022 15:10:43 +0000 (16:10 +0100)]
hw/cxl/cdat: CXL CDAT Data Object Exchange implementation
The Data Object Exchange implementation of CXL Coherent Device Attribute
Table (CDAT). This implementation is referring to "Coherent Device
Attribute Table Specification, Rev. 1.03, July. 2022" and "Compute
Express Link Specification, Rev. 3.0, July. 2022"
This patch adds core support that will be shared by both
end-points and switch port emulation.
Signed-off-by: Huai-Cheng Kuo <hchkuo@avery-design.com.tw> Signed-off-by: Chris Browy <cbrowy@avery-design.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20221014151045.24781-4-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jonathan Cameron [Fri, 14 Oct 2022 15:10:42 +0000 (16:10 +0100)]
hw/mem/cxl-type3: Add MSIX support
This will be used by several upcoming patch sets so break it out
such that it doesn't matter which one lands first.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20221014151045.24781-3-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Huai-Cheng Kuo [Fri, 14 Oct 2022 15:10:41 +0000 (16:10 +0100)]
hw/pci: PCIe Data Object Exchange emulation
Emulation of PCIe Data Object Exchange (DOE)
PCIE Base Specification r6.0 6.3 Data Object Exchange
Supports multiple DOE PCIe Extended Capabilities for a single PCIe
device. For each capability, a static array of DOEProtocol should be passed
to pcie_doe_init(). The protocols in that array will be registered under
the DOE capability structure. For each protocol, vendor ID, type, and
corresponding callback function (handle_request()) should be implemented.
This callback function represents how the DOE request for corresponding
protocol will be handled.
pcie_doe_{read/write}_config() must be appended to corresponding PCI
device's config_read/write() handler to enable DOE access. In
pcie_doe_read_config(), false will be returned if pci_config_read()
offset is not within DOE capability range. In pcie_doe_write_config(),
the function will have no affect if the address is not within the related
DOE PCIE extended capability.
Signed-off-by: Huai-Cheng Kuo <hchkuo@avery-design.com.tw> Signed-off-by: Chris Browy <cbrowy@avery-design.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20221014151045.24781-2-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miguel Luis <miguel.luis@oracle.com>
Message-Id: <20221011181730.10885-5-miguel.luis@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Ani Sinha <ani@anisinha.ca>
Miguel Luis [Tue, 11 Oct 2022 18:17:29 +0000 (18:17 +0000)]
acpi: arm/virt: madt: bump to revision 4 accordingly to ACPI 6.0 Errata A
MADT has been updated with the GIC Structures from ACPI 6.0 Errata A
and so MADT revision and GICC Structure must be updated also.
Fixes: 37f33084ed2e ("acpi: arm/virt: madt: use build_append_int_noprefix() API to compose MADT table") Signed-off-by: Miguel Luis <miguel.luis@oracle.com> Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20221011181730.10885-4-miguel.luis@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Miguel Luis [Tue, 11 Oct 2022 18:17:28 +0000 (18:17 +0000)]
acpi: fadt: support revision 6.0 of the ACPI specification
Update the Fixed ACPI Description Table (FADT) to revision 6.0 of the ACPI
specification adding the field "Hypervisor Vendor Identity".
This field's description states the following: "64-bit identifier of hypervisor
vendor. All bytes in this field are considered part of the vendor identity.
These identifiers are defined independently by the vendors themselves,
usually following the name of the hypervisor product. Version information
should NOT be included in this field - this shall simply denote the vendor's
name or identifier. Version information can be communicated through a
supplemental vendor-specific hypervisor API. Firmware implementers would
place zero bytes into this field, denoting that no hypervisor is present in
the actual firmware."
Signed-off-by: Miguel Luis <miguel.luis@oracle.com> Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20221011181730.10885-3-miguel.luis@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Miguel Luis [Tue, 11 Oct 2022 18:17:27 +0000 (18:17 +0000)]
tests/acpi: virt: allow acpi MADT and FADT changes
Step 3 from bios-tables-test.c documented procedure.
Signed-off-by: Miguel Luis <miguel.luis@oracle.com>
Message-Id: <20221011181730.10885-2-miguel.luis@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Ani Sinha <ani@anisinha.ca>
Ani Sinha [Fri, 21 Oct 2022 09:51:08 +0000 (15:21 +0530)]
MAINTAINERS: add myself as the maintainer for acpi biosbits avocado tests
I wrote the biosbits avocado tests for testing QEMU's ACPI/SMBIOS implementation
and all the related changes including fixes in biosbits software itself. Making
myself as the maintainer for QEMU's biosbits related files and test scripts.
Cc: Daniel P. Berrangé <berrange@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Maydell Peter <peter.maydell@linaro.org> Cc: John Snow <jsnow@redhat.com> Cc: Thomas Huth <thuth@redhat.com> Cc: Alex Bennée <alex.bennee@linaro.org> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Michael Tsirkin <mst@redhat.com> Signed-off-by: Ani Sinha <ani@anisinha.ca> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221021095108.104843-8-ani@anisinha.ca> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Ani Sinha [Fri, 21 Oct 2022 09:51:07 +0000 (15:21 +0530)]
acpi/tests/avocado/bits/doc: add a doc file to describe the acpi bits test
A doc file is added under docs/devel that describes the purpose of the various
test files and gives guidance to developers on where and how to make changes.
Cc: Daniel P. Berrange" <berrange@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Maydell Peter <peter.maydell@linaro.org> Cc: John Snow <jsnow@redhat.com> Cc: Thomas Huth <thuth@redhat.com> Cc: Alex Bennée <alex.bennee@linaro.org> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Michael Tsirkin <mst@redhat.com> Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20221021095108.104843-7-ani@anisinha.ca> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Ani Sinha [Fri, 21 Oct 2022 09:51:06 +0000 (15:21 +0530)]
acpi/tests/avocado/bits: add acpi and smbios avocado tests that uses biosbits
This introduces QEMU acpi/smbios biosbits avocado test which is run
from within the python virtual environment. When the bits tests are run, bits
binaries are downloaded from an external repo/location, bios bits iso is
regenerated containing the acpi/smbios bits tests that are maintained as a part
of the QEMU source under tests/avocado/acpi-bits/bits-test . When the VM is
spawned with the iso, it runs the tests in batch mode and the results are pushed
out from the VM to the test machine where they are analyzed by this script and
pass/fail results are reported.
Cc: Daniel P. Berrangé <berrange@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Maydell Peter <peter.maydell@linaro.org> Cc: John Snow <jsnow@redhat.com> Cc: Thomas Huth <thuth@redhat.com> Cc: Alex Bennée <alex.bennee@linaro.org> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Michael Tsirkin <mst@redhat.com> Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20221021095108.104843-6-ani@anisinha.ca> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Ani Sinha [Fri, 21 Oct 2022 09:51:05 +0000 (15:21 +0530)]
acpi/tests/avocado/bits: add biosbits config file for running bios tests
This change adds initial biosbits config file that instructs biosbits to run
bios test suits in batch mode. Additionally acpi and smbios structures are also
dumped.
Cc: Daniel P. Berrangé <berrange@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Maydell Peter <peter.maydell@linaro.org> Cc: John Snow <jsnow@redhat.com> Cc: Thomas Huth <thuth@redhat.com> Cc: Alex Bennée <alex.bennee@linaro.org> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Michael Tsirkin <mst@redhat.com> Signed-off-by: Ani Sinha <ani@anisinha.ca> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221021095108.104843-5-ani@anisinha.ca> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Ani Sinha [Fri, 21 Oct 2022 09:51:04 +0000 (15:21 +0530)]
acpi/tests/avocado/bits: disable acpi PSS tests that are failing in biosbits
PSS tests in acpi test suite seems to be failing in biosbits. This is because
the test is unable to find PSS support in QEMU bios. Let us disable
them for now so that make check does not fail. We can fix the tests and
re-enable them later.
Cc: Daniel P. Berrangé <berrange@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Maydell Peter <peter.maydell@linaro.org> Cc: John Snow <jsnow@redhat.com> Cc: Thomas Huth <thuth@redhat.com> Cc: Alex Bennée <alex.bennee@linaro.org> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Michael Tsirkin <mst@redhat.com> Signed-off-by: Ani Sinha <ani@anisinha.ca> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221021095108.104843-4-ani@anisinha.ca> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Ani Sinha [Fri, 21 Oct 2022 09:51:02 +0000 (15:21 +0530)]
acpi/tests/avocado/bits: initial commit of test scripts that are run by biosbits
This is initial commit of cpuid, acpi and smbios python test scripts for
biosbits to execute. No change has been made to them from the original code
written by the biosbits author Josh Triplett. They are required to be installed
into the bits iso file and then run from within the virtual machine booted off
with biosbits iso.
The test scripts have a ".py2" extension in order to prevent avocado from
loading them. They are written in python 2.7 and are run from within bios bits.
There is no need for avocado to try to load them and call out errors on python3
specific syntaxes.
The original location of these tests are here:
https://github.com/biosbits/bits/blob/master/python/testacpi.py
https://github.com/biosbits/bits/blob/master/python/smbios.py
https://github.com/biosbits/bits/blob/master/python/testcpuid.py
For QEMU, we maintain a fork of the above repo here with numerious fixes:
https://gitlab.com/qemu-project/biosbits-bits
The acpi test for example is maintained here in the fork:
https://gitlab.com/qemu-project/biosbits-bits/-/raw/master/python/testacpi.py
Cc: Daniel P. Berrangé <berrange@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Maydell Peter <peter.maydell@linaro.org> Cc: John Snow <jsnow@redhat.com> Cc: Thomas Huth <thuth@redhat.com> Cc: Alex Bennée <alex.bennee@linaro.org> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Michael Tsirkin <mst@redhat.com> Signed-off-by: Ani Sinha <ani@anisinha.ca> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221021095108.104843-2-ani@anisinha.ca> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Lei He [Sat, 8 Oct 2022 08:50:30 +0000 (16:50 +0800)]
cryptodev: Add a lkcf-backend for cryptodev
cryptodev: Added a new type of backend named lkcf-backend for
cryptodev. This backend upload asymmetric keys to linux kernel,
and let kernel do the accelerations if possible.
The lkcf stands for Linux Kernel Cryptography Framework.
Signed-off-by: lei he <helei.sig11@bytedance.com>
Message-Id: <20221008085030.70212-5-helei.sig11@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Lei He [Sat, 8 Oct 2022 08:50:29 +0000 (16:50 +0800)]
crypto: Support export akcipher to pkcs8
crypto: support export RSA private keys with PKCS#8 standard.
So that users can upload this private key to linux kernel.
Signed-off-by: lei he <helei.sig11@bytedance.com>
Message-Id: <20221008085030.70212-4-helei.sig11@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Lei He [Sat, 8 Oct 2022 08:50:28 +0000 (16:50 +0800)]
crypto: Support DER encodings
Add encoding interfaces for DER encoding:
1. support decoding of 'bit string', 'octet string', 'object id'
and 'context specific tag' for DER encoder.
2. implemented a simple DER encoder.
3. add more testsuits for DER encoder.
Signed-off-by: lei he <helei.sig11@bytedance.com>
Message-Id: <20221008085030.70212-3-helei.sig11@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Lei He [Sat, 8 Oct 2022 08:50:27 +0000 (16:50 +0800)]
virtio-crypto: Support asynchronous mode
virtio-crypto: Modify the current interface of virtio-crypto
device to support asynchronous mode.
Signed-off-by: lei he <helei.sig11@bytedance.com>
Message-Id: <20221008085030.70212-2-helei.sig11@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220922122155.1326543-6-robert.hu@linux.intel.com> Signed-off-by: Robert Hoo <robert.hu@linux.intel.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Robert Hoo [Thu, 22 Sep 2022 12:21:54 +0000 (20:21 +0800)]
acpi/nvdimm: Implement ACPI NVDIMM Label Methods
Recent ACPI spec [1] has defined NVDIMM Label Methods _LS{I,R,W}, which
deprecates corresponding _DSM Functions defined by PMEM _DSM Interface spec
[2].
Since the semantics of the new Label Methods are almost same as old _DSM
methods, the implementations here simply wrapper old ones.
ASL form diff can be found in next patch of updating golden master
binaries.
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Message-Id: <20220922122155.1326543-5-robert.hu@linux.intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Robert Hoo [Thu, 22 Sep 2022 12:21:53 +0000 (20:21 +0800)]
acpi/nvdimm: define macro for NVDIMM Device _DSM
Since it will be heavily used in next patch, define macro
NVDIMM_DEVICE_DSM_UUID for "4309AC30-0D11-11E4-9191-0800200C9A66", which is
NVDIMM device specific method uuid defined in NVDIMM _DSM interface spec,
Section 3. [1]
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220922122155.1326543-4-robert.hu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes: 90623ebf603 ("nvdimm acpi: check UUID") Fixes: 4568c948066 ("nvdimm acpi: save arg3 of _DSM method") Signed-off-by: Robert Hoo <robert.hu@linux.intel.com> Reviewed-by: Jingqi Liu <jingqi.liu@intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220922122155.1326543-3-robert.hu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Robert Hoo [Thu, 22 Sep 2022 12:21:51 +0000 (20:21 +0800)]
tests/acpi: allow SSDT changes
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com> Reviewed-by: Jingqi Liu <jingqi.liu@intel.com>
Message-Id: <20220922122155.1326543-2-robert.hu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Ani Sinha [Wed, 31 Aug 2022 04:53:10 +0000 (10:23 +0530)]
hw/i386/e820: remove legacy reserved entries for e820
e820 reserved entries were used before the dynamic entries with fw config files
were intoduced. Please see the following change: 7d67110f2d9a6("pc: add etc/e820 fw_cfg file")
Identical support was introduced into seabios as well with the following commit: ce39bd4031820 ("Add support for etc/e820 fw_cfg file")
Both the above commits are now quite old. QEMU machines 1.7 and newer no longer
use the reserved entries. Seabios uses fw config files and
dynamic e820 entries by default and only falls back to using reserved entries
when it has to work with old qemu (versions earlier than 1.7). Please see
functions qemu_cfg_e820() and qemu_early_e820(). It is safe to remove legacy
FW_CFG_E820_TABLE and associated code now as QEMU 7.0 has deprecated i440fx
machines 1.7 and older. It would be incredibly rare to run the latest qemu
version with a very old version of seabios that did not support fw config files
for e820.
As far as I could see, edk2/ovfm never supported reserved entries and uses fw
config files from the beginning. So there should be no incompatibilities with
ovfm as well.
CC: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Ani Sinha <ani@anisinha.ca> Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220831045311.33083-1-ani@anisinha.ca> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Stefan Hajnoczi [Tue, 1 Nov 2022 17:49:33 +0000 (13:49 -0400)]
Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging
Pull request
Note that we're still discussing "block/blkio: Make driver nvme-io_uring take a
"path" instead of a "filename"". I have sent the pull request now so everything
is ready for the soft freeze tomorrow if we decide to go ahead with the patch.
* tag 'block-pull-request' of https://gitlab.com/stefanha/qemu:
block/blkio: Make driver nvme-io_uring take a "path" instead of a "filename"
block/blkio: Tolerate device size changes
block/blkio: Add virtio-blk-vfio-pci BlockDriver
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Tue, 1 Nov 2022 17:39:05 +0000 (13:39 -0400)]
Merge tag 'pull-testing-for-7.2-011122-3' of https://github.com/stsquad/qemu into staging
testing and plugin updates for 7.2:
- cleanup win32/64 docker files
- update test-mingw test
- add flex/bison to debian-all-test
- handle --enable-static/--disable-pie in config
- extend timeouts on x86_64 avocado tests
- add flex/bison to debian-hexagon-cross
- use regular semihosting for nios2 check-tcg
- fix obscure linker error to nios2 softmmu tests
- various windows portability fixes for tests
- clean-up of MAINTAINERS
- use -machine none when appropriate in avocado
- make raspi2_initrd test detect shutdown
- disable sh4 rd2 tests on gitlab
- re-enable threadcount/linux-test for sh4
- clean-up s390x handling of "ex" instruction
- better handle new CPUs in execlog plugin
- pass CONFIG_DEBUG_TCG to plugin builds
- try and avoid races in test-io-channel-command
- speed up ssh key checking for tests/vm
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmNhI/MACgkQ+9DbCVqe
# KkSFXggAg0HIpBDcNz0V5Mh5p69F14pwbDSygKqGDFBebdOHeL7f+WCvQPUGEWxp
# 814zjvRY3SC4Mo4mtzguRvNu0styaUpemvRw5FDYK48GpEjg2eVxTnAFD4nr7ud0
# dhw3iaHP+RjA6s3EpPUqQ5nlZEgFJ+Tvkckk3wKSpksBYA4tJra6Uey5kpZ27x0T
# KOzB2P6w+9B/B11n/aeSxvRPZdnXt2MyfS/3pwwfoFYioEyaEQ3Ie6ooachtdSL3
# PEvnJVK0VVYbZQwBXJlycNLlK/D++s4AEwmnZ5GmvDFuXlkRO9YMy9Wa5TKJl7gz
# 76Aw1KHsE03SyAPvH4bE7eGkIwhJOQ==
# =6hXE
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 01 Nov 2022 09:49:39 EDT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-testing-for-7.2-011122-3' of https://github.com/stsquad/qemu: (31 commits)
tests/vm: use -o IdentitiesOnly=yes for ssh
tests/unit: cleanups for test-io-channel-command
contrib/plugins: protect execlog's last_exec expansion
contrib/plugins: enable debug on CONFIG_DEBUG_TCG
tests/tcg: include CONFIG_PLUGIN in config-host.mak
target/s390x: fake instruction loading when handling 'ex'
target/s390x: don't probe next pc for EXecuted insns
target/s390x: don't use ld_code2 to probe next pc
tests/tcg: re-enable threadcount for sh4
tests/tcg: re-enable linux-test for sh4
tests/avocado: disable sh4 rd2 tests on Gitlab
tests/avocado: raspi2_initrd: Wait for guest shutdown message before stopping
tests/avocado: set -machine none for userfwd and vnc tests
MAINTAINERS: fix-up for check-tcg Makefile changes
MAINTAINERS: add features_to_c.sh to gdbstub files
MAINTAINERS: add entries for the key build bits
hw/usb: dev-mtp: Use g_mkdir()
block/vvfat: Unify the mkdir() call
tcg: Avoid using hardcoded /tmp
semihosting/arm-compat-semi: Avoid using hardcoded /tmp
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Tue, 1 Nov 2022 13:36:13 +0000 (09:36 -0400)]
Merge tag 'pull-tcg-20221031-2' of https://gitlab.com/rth7680/qemu into staging
Remove sparc32plus support from tcg/sparc.
target/i386: Use cpu_unwind_state_data for tpr access.
target/i386: Expand eflags updates inline
Complete cpu initialization before registration
* tag 'pull-tcg-20221031-2' of https://gitlab.com/rth7680/qemu:
tests/tcg/multiarch: Add munmap-pthread.c
accel/tcg: Complete cpu initialization before registration
target/i386: Expand eflags updates inline
accel/tcg: Remove reset_icount argument from cpu_restore_state_from_tb
accel/tcg: Remove will_exit argument from cpu_restore_state
target/openrisc: Use cpu_unwind_state_data for mfspr
target/openrisc: Always exit after mtspr npc
target/i386: Use cpu_unwind_state_data for tpr access
accel/tcg: Introduce cpu_unwind_state_data
tcg/tci: fix logic error when registering helpers via FFI
tcg/sparc64: Remove sparc32plus constraints
tcg/sparc64: Rename from tcg/sparc
tcg/sparc: Remove support for sparc32plus
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* tag 'qemu-macppc-20221031' of https://github.com/mcayland/qemu:
mac_newworld: Turn CORE99_VIA_CONFIG defines into an enum
mac_{old|new}world: Code style fix adding missing braces to if-s
mac_nvram: Use NVRAM_SIZE constant
hw/ppc/mac.h: Rename to include/hw/nvram/mac_nvram.h
hw/ppc/mac.h: Move PROM and KERNEL defines to board code
hw/ppc/mac.h: Move grackle-pcihost type declaration out to a header
hw/ppc/mac.h: Move macio specific parts out from shared header
hw/ppc/mac.h: Move newworld specific parts out from shared header
mac_{old|new}world: Reduce number of QOM casts
mac_newworld: Clean up creation of Uninorth devices
mac_{old|new}world: Avoid else branch by setting default value
mac_{old|new}world: Set tbfreq at declaration
mac_oldworld: Drop some more variables
mac_newworld: Drop some variables
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
accel/tcg: Complete cpu initialization before registration
Delay cpu_list_add until realize is complete, so that cross-cpu
interaction does not happen with incomplete cpu state. For this,
we must delay plugin initialization out of tcg_exec_realizefn,
because no cpu_index has been assigned.
Fixes a problem with cross-cpu jump cache flushing, when the
jump cache has not yet been allocated.
The helpers for reset_rf, cli, sti, clac, stac are
completely trivial; implement them inline.
Drop some nearby #if 0 code.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
target/openrisc: Use cpu_unwind_state_data for mfspr
Since we do not plan to exit, use cpu_unwind_state_data
and extract exactly the data requested.
This is a bug fix, in that we no longer clobber dflag.
Consider:
l.j L2 // branch
l.mfspr r1, ppc // delay
L1: boom
L2: l.lwa r3, (r4)
Here, dflag would be set by cpu_restore_state (because that is the current
state of the cpu), but but not cleared by tb_stop on exiting the TB
(because DisasContext has recorded the current value as zero).
The next TB begins at L2 with dflag incorrectly set. If the load has a
tlb miss, then the exception will be delivered as per a delay slot:
with DSX set in the status register and PC decremented (delay slots
restart by re-executing the branch). This will cause the return from
interrupt to go to L1, and boom!
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
target/i386: Use cpu_unwind_state_data for tpr access
Avoid cpu_restore_state, and modifying env->eip out from
underneath the translator with TARGET_TB_PCREL. There is
some slight duplication from x86_restore_state_to_opc,
but it's just a few lines.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1269 Reviewed-by: Claudio Fontana <cfontana@suse.de> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Ilya Leoshkevich [Thu, 27 Oct 2022 18:36:36 +0000 (19:36 +0100)]
tests/vm: use -o IdentitiesOnly=yes for ssh
When one has a lot of keys in ~/.ssh directory, the ssh command will
try all of them before the one specified on the command line, and this
may cause the remote ssh server to reject the connection due to too
many failed authentication attempts.
Fix by adding -o IdentitiesOnly=yes, which makes the ssh client
consider only the keys specified on the command line.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20221027113026.2280863-1-iii@linux.ibm.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221027183637.2772968-31-alex.bennee@linaro.org>
Alex Bennée [Thu, 27 Oct 2022 18:36:35 +0000 (19:36 +0100)]
tests/unit: cleanups for test-io-channel-command
This test is hanging under heavy load when the two socats race while
trying to create the socket. I've tried various approaches to avoid
the race but it seems "creat=0" won't stop socat trying to create a
pipe if it executes first. In the end I just use a small sleep which
seems to be reliable enough on the load situations I've tried.
While I was there I also properly created a tmpdir for the socket to
live in which is cleaned up at the end of the test.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Cc: Thomas Huth <thuth@redhat.com> Cc: Marc-André Lureau <marcandre.lureau@redhat.com> Cc: Juan Quintela <quintela@redhat.com>
Message-Id: <20221027183637.2772968-30-alex.bennee@linaro.org>
We originally naively treated expansion as safe because we expected
each new CPU/thread to appear in order. However the -M raspi2 model
triggered a case where a new high cpu_index thread started executing
just before a smaller one.
Clean this up by converting the GArray into the simpler GPtrArray and
then holding a lock for the expansion.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Cc: Alexandre Iooss <erdnaxe@crans.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221027183637.2772968-29-alex.bennee@linaro.org>
Alex Bennée [Thu, 27 Oct 2022 18:36:33 +0000 (19:36 +0100)]
contrib/plugins: enable debug on CONFIG_DEBUG_TCG
We used to rely on QEMU_CFLAGS to expose the debug flags but now this
is synthesised by meson and only available to the main build. Add our
own flags if we detect the build has been enabled with
CONFIG_DEBUG_TCG (which is the default for --enable-debug anyway).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Cc: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221027183637.2772968-28-alex.bennee@linaro.org>
Alex Bennée [Thu, 27 Oct 2022 18:36:31 +0000 (19:36 +0100)]
target/s390x: fake instruction loading when handling 'ex'
The s390x EXecute instruction is a bit weird as we synthesis the
executed instruction from what we have stored in memory. This missed
the plugin instrumentation.
Work around this with a special helper to inform the rest of the
translator about the instruction so things stay consistent.
Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Cc: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221027183637.2772968-26-alex.bennee@linaro.org>
Alex Bennée [Thu, 27 Oct 2022 18:36:28 +0000 (19:36 +0100)]
tests/tcg: re-enable threadcount for sh4
This test was marked as broken due to bug #856 which was fixed by ab419fd8a0 (target/sh4: Fix TB_FLAG_UNALIGN). Local testing shows this
is solid now so lets re-enable the test.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <20221027183637.2772968-23-alex.bennee@linaro.org>
Alex Bennée [Thu, 27 Oct 2022 18:36:27 +0000 (19:36 +0100)]
tests/tcg: re-enable linux-test for sh4
This test was marked as broken due to bug #704 which was fixed by aee14c77f4 (linux-user: Rewrite do_getdents, do_getdents64). Local
testing shows this is solid now so lets re-enable the test.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <20221027183637.2772968-22-alex.bennee@linaro.org>
Alex Bennée [Thu, 27 Oct 2022 18:36:26 +0000 (19:36 +0100)]
tests/avocado: disable sh4 rd2 tests on Gitlab
Running repeated invocations on a number of test boxes show a fairly
high error rate:
$ retry.py -n 100 -c -- ./tests/venv/bin/avocado run tests/avocado/boot_linux_console.py:BootLinuxConsole.test_sh4_r2d
retry.py called with ['./tests/venv/bin/avocado', 'run', 'tests/avocado/boot_linux_console.py:BootLinuxConsole.test_sh4_r2d']
Results:
Run, Ret, Pass/Fail, Time, Total Pass, Total Run
...
Results summary:
0: 94 times (94.00%), avg time 2.254 (0.00 varience/0.04 deviation)
1: 3 times (3.00%), avg time 1.837 (0.02 varience/0.14 deviation)
8: 3 times (3.00%), avg time 91.288 (0.02 varience/0.15 deviation)
Examining the logs they fall into various categories of un-handled
unaligned access by user space and unexpected FPU usage by the kernel
which ultimately lead to the failure to reach the login prompt. This
could be bugs in the translator that only get hit occasionally or just
a flaky kernel - its hard to tell. To avoid these failures gating CI
lets skip on GitLab.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Cc: Thomas Huth <thuth@redhat.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Magnus Damm <magnus.damm@gmail.com>
Message-Id: <20221027183637.2772968-21-alex.bennee@linaro.org>
Peter Maydell [Thu, 27 Oct 2022 18:36:25 +0000 (19:36 +0100)]
tests/avocado: raspi2_initrd: Wait for guest shutdown message before stopping
The avocado test
tests/avocado/boot_linux_console.py:BootLinuxConsole.test_arm_raspi2_initrd
finishes with
exec_command(self, 'halt')
# Wait for VM to shut down gracefully
self.vm.wait()
In theory this should be fine. In practice it runs into two bugs:
* when the test calls self.vm.wait() Avocado closes the socket
connection to the guest serial console immediately, so the
avocado logs don't have the last part of the guest output:
https://gitlab.com/qemu-project/qemu/-/issues/1265
* when the socket is closed, a bug in the QEMU socket chardev
means that it loses any data that the guest UART has not
yet consumed. This means that the guest doesn't always read
the full 'halt' command string, so the test intermittently
fails with a timeout:
https://gitlab.com/qemu-project/qemu/-/issues/1264
Work around both of these by waiting for the guest to print the
string that means it has completed the shutdown process. This fixes
a very long standing intermittent failure in this test.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/636 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20221020102012.3015662-1-peter.maydell@linaro.org>
Message-Id: <20221027183637.2772968-20-alex.bennee@linaro.org>
Alex Bennée [Thu, 27 Oct 2022 18:36:24 +0000 (19:36 +0100)]
tests/avocado: set -machine none for userfwd and vnc tests
These are exercising core QEMU features and don't actually run code.
Not specifying a machine will fail when avocado chooses the native
arch binary to run. Be explicit.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221027183637.2772968-19-alex.bennee@linaro.org>
projects / qemu-xen.git / log