Jan Beulich [Wed, 13 Jun 2012 10:45:07 +0000 (10:45 +0000)]
qemu/xendisk: set maximum number of grants to be used
Legacy (non-pvops) gntdev drivers may require this to be done when the
number of grants intended to be used simultaneously exceeds a certain
driver specific default limit.
Anthony PERARD [Mon, 21 May 2012 16:12:43 +0000 (16:12 +0000)]
xen: Fix PV-on-HVM
In the context of PV-on-HVM under Xen, the emulated nics are supposed to be
unplug before the guest drivers are initialized, when the guest write to a
specific IO port.
Without this patch, the guest end up with two nics with the same MAC, the
emulated nic and the PV nic.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Paolo Bonzini [Tue, 20 Mar 2012 09:49:17 +0000 (10:49 +0100)]
main loop: use msec-based timeout in glib_select_fill
The timeval-based timeout is not needed until we actually invoke select,
so compute it only then. Also group the two calls that modify the
timeout, glib_select_fill and os_host_main_loop_wait.
Roger Pau Monne [Fri, 18 May 2012 12:05:31 +0000 (12:05 +0000)]
audio: split IN_T into two separate constants
Split IN_T into BSIZE and ITYPE, to avoid expansion if the OS has
defined macros for the intX_t and uintX_t types. The IN_T constant is
then defined in mixeng_template.h so it can be used by the
functions/macros on this header file.
This change has been tested successfully under Debian Linux and NetBSD
6.0BETA.
timers: the rearm function should be able to handle delta = INT64_MAX
Fix win32_rearm_timer and mm_rearm_timer: they should be able to handle
INT64_MAX as a delta parameter without overflowing.
Also, the next deadline in ms should be calculated rounding down rather
than up (see unix_rearm_timer and dynticks_rearm_timer).
Finally ChangeTimerQueueTimer takes an unsigned long and timeSetEvent
takes an unsigned int as delta, so cast the ms delta to the appropriate
unsigned integer.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
xen: do not initialize the interval timer and PCSPK emulator
PIT and PCSPK are emulated by the hypervisor so we don't need to emulate
them in Qemu: this patch prevents Qemu from waking up needlessly at
PIT_FREQ on Xen.
Jan Beulich [Mon, 14 May 2012 16:46:33 +0000 (16:46 +0000)]
xen_disk: properly update stats in ioreq_release()
While for the "normal" case (called from blk_send_response_all())
decrementing requests_finished is correct, doing so in the parse error
case is wrong; requests_inflight needs to be decremented instead.
Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com>
xen_disk: use bdrv_aio_flush instead of bdrv_flush
Use bdrv_aio_flush instead of bdrv_flush.
Make sure to call bdrv_aio_writev/readv after the presync bdrv_aio_flush is fully
completed and make sure to call the postsync bdrv_aio_flush after
bdrv_aio_writev/readv is fully completed.
John V. Baboval [Tue, 17 Apr 2012 15:42:41 +0000 (15:42 +0000)]
xen: Support guest reboots
Call xc_domain_shutdown with the reboot flag when the guest requests a reboot.
Signed-off-by: John V. Baboval <john.baboval@virtualcomputer.com> Signed-off-by: Tom Goetz <tom.goetz@virtualcomputer.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
xen: introduce an event channel for buffered io event notifications
Use the newly introduced HVM_PARAM_BUFIOREQ_EVTCHN to receive
notifications for buffered io events.
After the first notification is received leave the event channel masked
and setup a timer to process the rest of the batch.
Once we have completed processing the batch, unmask the event channel
and delete the timer.
xen_console: ignore console disconnect events from console/0
The first console has a different location compared to other PV devices
(console, rather than device/console/0) and doesn't obey the xenstore
state protocol. We already special case the first console in con_init
and con_initialise, we should also do it in con_disconnect.
Anthony PERARD [Wed, 18 Jan 2012 12:21:38 +0000 (12:21 +0000)]
xen mapcache: check if memory region has moved.
This patch changes the xen_map_cache behavior. Before trying to map a guest
addr, mapcache will look into the list of range of address that have been moved
(physmap/set_memory). There is currently one memory space like this, the vram,
"moved" from were it's allocated to were the guest will look into.
This help to have a succefull migration.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Kenneth Salerno [Sun, 19 Feb 2012 00:05:44 +0000 (16:05 -0800)]
qemu-1.0.1/VERSION
Hello,
The VERSION file in stable release qemu-1.0.1 has what I believe might be a typo: "1.0,1" rather than "1.0.1". This is causing a parsing issue for windres.exe in Win32 which chokes on:
#define CONFIG_FILEVERSION 1,0,1,0,1,0
#define CONFIG_PRODUCTVERSION 1,0,1,0,1,0
when it should be seeing this:
#define CONFIG_FILEVERSION 1,0,1,0
#define CONFIG_PRODUCTVERSION 1,0,1,0
Patch:
Signed-off-by: Justin M. Forbes <jforbes@redhat.com>
s390: fix cpu hotplug / cpu activity on interrupts
The add_del/running_cpu code and env->halted are tracking stopped cpus.
Sleeping cpus (idle and enabled for interrupts) are waiting inside the
kernel.
No interrupt besides the restart can move a cpu from stopped to
operational. This is already handled over there. So lets just remove
the bogus wakup from the common interrupt delivery, otherwise any
interrupt will wake up a cpu, even if this cpu is stopped (Thus leading
to strange hangs on sigp restart)
This fixes
echo 0 > /sys/devices/system/cpu/cpu0/online
echo 1 > /sys/devices/system/cpu/cpu0/online
in the guest
Signed-off-by: Christian Borntraeger<borntraeger@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
(cherry picked from commit 93116ac0cf9734e7b28886aedf03848b37d6785e)
David Gibson [Wed, 11 Jan 2012 19:46:27 +0000 (19:46 +0000)]
pseries: Don't try to munmap() a malloc()ed TCE table
For the pseries machine, TCE (IOMMU) tables can either be directly
malloc()ed in qemu or, when running on a KVM which supports it, mmap()ed
from a KVM ioctl. The latter option is used when available, because it
allows the (frequent bottlenext) H_PUT_TCE hypercall to be KVM accelerated.
However, even when KVM is persent, TCE acceleration is not always possible.
Only KVM HV supports this ioctl(), not KVM PR, or the kernel could run out
of contiguous memory to allocate the new table. In this case we need to
fall back on the malloc()ed table.
When a device is removed, and we need to remove the TCE table, we need to
either munmap() or free() the table as appropriate for how it was
allocated. The code is supposed to do that, but we buggily fail to
initialize the tcet->fd variable in the malloc() case, which is used as a
flag to determine which is the right choice.
This patch fixes the bug, and cleans up error messages relating to this
path while we're at it.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
David Gibson [Tue, 13 Dec 2011 04:24:34 +0000 (15:24 +1100)]
pseries: Populate "/chosen/linux,stdout-path" in the FDT
There is a device tree property "/chosen/linux,stdout-path" which indicates
which device should be used as stdout - ie. "the console".
Currently we don't specify anything, which means both firmware and Linux
choose something arbitrarily. Use the routine we added in the last patch
to pick a default vty and specify it as stdout.
Currently SLOF doesn't use the property, but we are hoping to update it
to do so.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
(cherry picked from commit 68f3a94c64bbaaf8c7f2daa70de1b5d87a432f86)
David Gibson [Mon, 12 Dec 2011 18:24:33 +0000 (18:24 +0000)]
pseries: Add a routine to find a stable "default" vty and use it
In vty_lookup() we have a special case for supporting early debug in
the kernel. This accepts reg == 0 as a special case to mean "any vty".
We implement this by searching the vtys on the bus and returning the
first we find. This means that the vty we chose depends on the order
the vtys are specified on the QEMU command line - because that determines
the order of the vtys on the bus.
We'd rather the command line order was irrelevant, so instead return
the vty with the lowest reg value. This is still a guess as to what the
user really means, but it is at least stable WRT command line ordering.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
[agraf] fix braces
(cherry picked from commit 98331f8ad6a3e2cfbb402d72e6be47eac7706251)
David Gibson [Mon, 12 Dec 2011 18:24:32 +0000 (18:24 +0000)]
pseries: Emit device tree nodes in reg order
Although in theory the device tree has no inherent ordering, in practice
the order of nodes in the device tree does effect the order that devices
are detected by software.
Currently the ordering is determined by the order the devices appear on
the QEMU command line. Although that does give the user control over the
ordering, it is fragile, especially when the user does not generate the
command line manually - eg. when using libvirt etc.
So order the device tree based on the reg value, ie. the address of on
the VIO bus of the devices. This gives us a sane and stable ordering.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
[agraf] add braces
(cherry picked from commit 05c194384f836240ea4c2da5fa3be43a54bff021)
David Gibson [Mon, 28 Nov 2011 20:21:39 +0000 (20:21 +0000)]
pseries: Fix array overrun bug in PCI code
spapr_populate_pci_devices() containd a loop with PCI_NUM_REGIONS (7)
iterations. However this overruns the 'bars' global array, which only has
6 elements. In fact we only want to run this loop for things listed in the
bars array, so this patch corrects the loop bounds to reflect that.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
(cherry picked from commit 135712de61dfa22368e98914d65b8b0860ec8505)
Alexander Graf [Fri, 18 Nov 2011 15:41:59 +0000 (16:41 +0100)]
console: Fix segfault on screendump without VGA adapter
When trying to create a screen dump without having any VGA adapter
inside the guest, QEMU segfaults.
This is because it's trying to switch back to the "previous" screen
it was on before dumping the VGA screen. Unfortunately, in my case
there simply is no previous screen so it accesses a NULL pointer.
Fix it by checking if previous_active_console is actually available.
Kevin Wolf [Wed, 7 Dec 2011 11:42:10 +0000 (12:42 +0100)]
qemu-img rebase: Fix for undersized backing files
Backing files may be smaller than the corresponding COW file. When
reading directly from the backing file, qemu-img rebase must consider
this and assume zero sectors after the end of backing files.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Avi Kivity [Mon, 5 Dec 2011 17:20:12 +0000 (19:20 +0200)]
coroutine: switch per-thread free pool to a global pool
ucontext-based coroutines use a free pool to reduce allocations and
deallocations of coroutine objects. The pool is per-thread, presumably
to improve locality. However, as coroutines are usually allocated in
a vcpu thread and freed in the I/O thread, the pool accounting gets
screwed up and we end allocating and freeing a coroutine for every I/O
request. This is expensive since large objects are allocated via the
kernel, and are not cached by the C runtime.
Fix by switching to a global pool. This is safe since we're protected
by the global mutex.
Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Fri, 25 Nov 2011 11:06:22 +0000 (12:06 +0100)]
qiov: prevent double free or use-after-free
qemu_iovec_destroy does not clear the QEMUIOVector fully, and the data
could thus be used after free or freed again. While I do not know any
example in the tree, I observed this using virtio-scsi (and SCSI
scatter/gather) when canceling DMA requests.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Aurelien Jarno [Sat, 7 Jan 2012 14:20:12 +0000 (15:20 +0100)]
target-sh4: ignore ocbp and ocbwb instructions
ocbp and ocbwb controls the writeback of a cache line to memory. They
are supposed to do nothing in case of a cache miss. Given QEMU only
partially emulate caches, it is safe to ignore these instructions.
This fixes a kernel oops when trying to access an rtl8139 NIC with
recent versions.
Andriy Gapon [Thu, 22 Dec 2011 09:34:30 +0000 (11:34 +0200)]
usb-ohci: td.cbp incorrectly updated near page end
The current code that updates the cbp value after a transfer looks like this:
td.cbp += ret;
if ((td.cbp & 0xfff) + ret > 0xfff) {
<handle page overflow>
because the 'ret' value is effectively added twice the check may fire too early
when the overflow hasn't happened yet.
Below is one of the possible changes that correct the behavior:
Gerd Hoffmann [Thu, 5 Jan 2012 14:49:18 +0000 (15:49 +0100)]
usb-host: properly release port on unplug & exit
Factor out port release into a separate function. Call release function
in exit notifier too. Add explicit call the USBDEVFS_RELEASE_PORT
ioctl, just closing the hub file handle seems not to be enougth. Make
sure we release the port before resetting the device, otherwise host
drivers will not re-attach.
Gerd Hoffmann [Wed, 4 Jan 2012 17:13:54 +0000 (18:13 +0100)]
usb-storage: cancel I/O on reset
When resetting the usb-storage device we'll have to carefully cancel
and clear any requests which might be in flight, otherwise we'll confuse
the state machine.
Cao,Bing Bu [Tue, 13 Dec 2011 01:22:20 +0000 (09:22 +0800)]
Fix parse of usb device description with multiple configurations
Changed From V1:
Use DPRINTF instead of fprintf,because it is not an error.
When testing ipod on QEMU by He Jie Xu<xuhj@linux.vnet.ibm.com>,qemu made a assertion.
We found that the ipod with 2 configurations,and the usb-linux did not parse the descriptor correctly.
The descr_len returned is the total length of the all configurations,not one configuration.
The older version will through the other configurations instead of skip,continue parsing the descriptor of interfaces/endpoints in other configurations,then went wrong.
This patch will put the configuration descriptor parse in loop outside and dispel the other configurations not requested.
Signed-off-by: Cao,Bing Bu <mars@linux.vnet.ibm.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When the i386 cmpxchg instruction is executed with a memory operand
and the comparison result is "unequal", do the memory write before
changing the accumulator instead of the other way around, because
otherwise the new accumulator value will incorrectly be used in the
comparison when the instruction is restarted after a page fault.
This bug was originally reported on 2010-04-25 as
https://bugs.launchpad.net/qemu/+bug/569760
Stefan Hajnoczi [Wed, 21 Dec 2011 07:07:22 +0000 (12:37 +0530)]
hw/9pfs: replace iovec manipulation with QEMUIOVector
The v9fs_read() and v9fs_write() functions rely on iovec[] manipulation
code should be replaced with QEMUIOVector to avoid duplicating code.
In the future it may be possible to make the code even more concise by
using QEMUIOVector consistently across virtio and 9pfs.
The "v" format specifier for pdu_marshal() and pdu_unmarshal() is
dropped since it does not actually pack/unpack anything. The specifier
was also not implemented to update the offset variable and could only be
used at the end of a format string, another sign that this shouldn't
really be a format specifier. Instead, see the new
v9fs_init_qiov_from_pdu() function.
This change avoids a possible iovec[] buffer overflow when indirect
vrings are used since the number of vectors is now limited by the
underlying VirtQueueElement and cannot be out-of-bounds.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Deepak C Shetty [Sun, 4 Dec 2011 17:05:28 +0000 (22:35 +0530)]
hw/9pfs: Reset server state during TVERSION
As per the 9p rfc, during TVERSION its necessary to clean all the active
fids, so that we start the session from a clean state. Its also needed in
scenarios where the guest is booting off 9p, and boot fails, and client
restarts, without any knowledge of the past, it will issue a TVERSION again
so this ensures that we always start from a clean state.
Signed-off-by: Deepak C Shetty <deepakcs@linux.vnet.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
handle fs driver require a set of newly added syscalls. Don't
Compile handle FS driver if those syscalls are not available.
Instead of adding #ifdef for all those syscalls we check for
open by handle syscall. If that is available then rest of the
syscalls used by the driver should be available.
Andreas Färber [Wed, 30 Nov 2011 15:26:21 +0000 (16:26 +0100)]
exec.c: Fix subpage memory access to RAM MemoryRegion
Commit 95c318f5e1f88d7e5bcc6deac17330fd4806a2d3 (Fix segfault in mmio
subpage handling code.) prevented a segfault by making all subpage
registrations over an existing memory page perform an unassigned access.
Symptoms were writes not taking effect and reads returning zero.
Very small page sizes are not currently supported either,
so subpage memory areas cannot fully be avoided.
Therefore change the previous fix to use a new IO_MEM_SUBPAGE_RAM
instead of IO_MEM_UNASSIGNED. Suggested by Avi.
Reviewed-by: Avi Kivity <avi@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Cc: Avi Kivity <avi@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Stefan Weil [Tue, 29 Nov 2011 05:34:48 +0000 (06:34 +0100)]
malta: Fix regression (i8259 interrupts did not work)
Commit 5632ae46d5bda798e971dae48ebb318ac2c3686a passes the address
of i8259 to qemu_irq_proxy. i8259 is an auto variable with undefined
value outside of mips_malta_init.
This made the interrupt proxy unusable: either QEMU crashes, or
the interrupt handler was not called.
Ethernet for example no longer worked with MIPS Malta.
v2:
While v1 used a static variable for i8259, this patch introduces
a qdev for the malta machine. i8259 is now part of the device status.
This is a minimal qdev implementation to keep the patch small.
Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
(cherry picked from commit e9b40fd34ceb23461083d505a444a389c094455b)
Michael Roth [Tue, 29 Nov 2011 22:47:49 +0000 (16:47 -0600)]
Makefile: use full path for qapi-generated directory
Generally $(BUILD_DIR) == $(CURDIR), but that isn't necessarilly the
case, so use $(BUILD_DIR)/qapi-generated for generated files to
avoid potentionally sticking generating files in odd places outside
the build's include paths.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Michael Roth [Tue, 29 Nov 2011 22:47:48 +0000 (16:47 -0600)]
qapi: fix guardname generation
Fix a bug in handling dotted paths, and exclude directory prefixes
from generated guardnames to avoid odd/pseudo-random guardnames in
generated headers.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Max Filippov [Thu, 24 Nov 2011 12:11:31 +0000 (16:11 +0400)]
configure: avoid screening of --{en, dis}able-usb-redir options
--*dir) option pattern precede --{en,dis}able-usb-redir) patterns in the
option analysis switch, making the latter options have no effect.
There were some --*dir that are supported by Autoconf and not by QEMU configure.
The aim was to let QEMU packagers use the rpm (or similar) macro that overrides
directories for their distribution.
Replace --*dir with exact option names.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
cutils: Make strtosz & friends leave follow set to callers
strtosz() & friends require the size to be at the end of the string,
or be followed by whitespace or ','. I find this surprising, because
the name suggests it works like strtol().
The check simplifies callers that accept exactly that follow set
slightly. No such callers exist.
The check is redundant for callers that accept a smaller follow set,
and thus need to check themselves anyway. Right now, this is the case
for all but one caller. All of them neglected to check, or checked
incorrectly, but the previous few commits fixed them up.
Finally, the check is problematic for callers that accept a larger
follow set. This is the case in monitor_parse_command().
Fortunately, the problems there are relatively harmless.
monitor_parse_command() uses strtosz() for argument type 'o'. When
the last argument is of type 'o', a trailing ',' is diagnosed
differently than other trailing junk:
(qemu) migrate_set_speed 1x
invalid size
(qemu) migrate_set_speed 1,
migrate_set_speed: extraneous characters at the end of line
A related inconsistency exists with non-last arguments. No such
command exists, but let's use memsave to explore the inconsistency.
The monitor permits, but does not require whitespace between
arguments. For instance, "memsave (1-1)1024foo" is parsed as command
memsave with three arguments 0, 1024 and "foo". Yes, this is daft,
but at least it's consistently daft.
If I change memsave's second argument from 'i' to 'o', then "memsave
(1-1)1foo" is rejected, because the size is followed by an 'f'. But
"memsave (1-1)1," is still accepted, and duly saves to file ",".
We don't have any users of strtosz that profit from the check. In the
users we have, it appears to encourage sloppy error checking, or gets
in the way. Drop the bothersome check.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
strtosz_suffix() fails unless the size is followed by 0, whitespace or
','. Useless here, because we need to fail for any junk following the
size, even if it starts with whitespace or ','. Check manually.
Things like "qemu-img create xxx 1024," and "qemu-img convert -S '1024
junk'" are now caught.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
cpu_x86_find_by_name() uses strtosz_suffix_unit(), but screws up the
error checking. It detects some failures, but not all. Undetected
failures result in a zero tsc_khz value (error value -1 divided by
1000), which means "no tsc_freq set".
To reproduce, try "-cpu qemu64,tsc_freq=9999999T".
strtosz_suffix_unit() fails, because the value overflows int64_t,
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
strtosz_suffix() fails unless the size is followed by 0, whitespace or
','. Useless here, because we need to fail for any junk following the
size, even if it starts with whitespace or ','. Check manually.
Things like "-m 1024," are now caught.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
strtosz_suffix() fails unless the size is followed by 0, whitespace or
','. Useless here, because we need to fail for any junk following the
size, even if it starts with whitespace or ','. Check manually.
cutils: Drop broken support for zero strtosz default_suffix
Commit 9f9b17a4's strtosz() defaults a missing suffix to 'M', except
it rejects fractions then (switch case 0).
When commit d8427002 introduced strtosz_suffix(), that changed:
fractions are no longer rejected, because we go to switch case 'M' on
missing suffix now. Not mentioned in commit message, probably
unintentional. Not worth changing back now.
Because case 0 is still around, you can get the old behavior by
passing a zero default_suffix to strtosz_suffix() or
strtosz_suffix_unit(). Undocumented and not used. Drop.
Commit d8427002 also neglected to update the function comment. Fix it
up.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Hans de Goede [Sat, 19 Nov 2011 09:22:47 +0000 (10:22 +0100)]
usb-redir: Don't try to write to the chardev after a close event
Since we handle close async in a bh, do_write and thus write can get
called after receiving a close event. This patch adds a check to
the usb-redir write callback to not call qemu_chr_fe_write on a closed
backend.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
These fixes mainly target the other side sending some (error status)
packets after a disconnect packet. In some cases these would get queued
up and then reported to the controller when a new device gets connected.
* Fully reset device state on disconnect
* Don't allow a connect message when already connected
* Ignore iso and interrupt status messages when disconnected
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Define a state callback and make that generate chardev open/close events when
called by the spice-server.
Notes:
1) For all but the newest spice-server versions (which have a fix for this)
the code ignores these events for a spicevmc with a subtype of vdagent, this
subtype specific knowledge is undesirable, but unavoidable for now, see:
http://lists.freedesktop.org/archives/spice-devel/2011-July/004837.html
2) This code deliberately sends the events immediately rather then from a
bh. This is done this way because:
a) There is no need to do it from a bh; and
b) Doing it from a bh actually causes issues because the spice-server may send
data immediately after the open and when the open runs from a bh, then
qemu_chr_be_can_write will return 0 for the first write which the spice-server
does not expect, when this happens the spice-server will never retry the write
causing communication to stall.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Hans de Goede [Sat, 19 Nov 2011 09:22:43 +0000 (10:22 +0100)]
qemu-char: rename qemu_chr_event to qemu_chr_be_event and make it public
Rename qemu_chr_event to qemu_chr_be_event, since it is only to be
called by backends and make it public so that it can be used by chardev
code which lives outside of qemu-char.c
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Thu, 24 Nov 2011 12:28:52 +0000 (13:28 +0100)]
virtio: add and use virtio_set_features
vdev->guest_features is not masking features that are not supported by
the guest. Fix this by introducing a common wrapper to be used by all
virtio bus implementations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Mon, 21 Nov 2011 08:29:11 +0000 (09:29 +0100)]
9pfs: improve portability to older systems
Small requirements on "new" features have percolated to virtio-9p-local.c.
In particular, the utimensat wrapper actually only supports dirfd = AT_FDCWD
and flags = AT_SYMLINK_NOFOLLOW in the fallback code. Remove the arguments
so that virtio-9p-local.c will not use AT_* constants.
At the same time, fail local_ioc_getversion if the ioctl is not supported
by the host.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
"Anthony, I think we should revert that commit and refactor cpuid for
1.1. The logic is spread over too many places which makes it hard to
reason about."
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Reported-by: Peter Chubb <nicta.com.au> Signed-off-by: Florian Mickler <florian@mickler.org>
(cherry-picked from Linux kernel commit c023e4734c3e8801e0ecb5e81b831d42a374d861) Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
projects / qemu-upstream-4.2-testing.git / log