This effectively enables experimental SMP support. Floating interrupts are
still a mess, so allow it but print a big warning. There also seems
to be a problem with CPU hotplug (after the main loop started).
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-27-david@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[CH: changed insn-data.def as pointed out by Richard] Signed-off-by: Cornelia Huck <cohuck@redhat.com>
s390x/tcg: implement STOP and RESET interrupts for TCG
Implement them like KVM implements/handles them. Both can only be
triggered via SIGP instructions. RESET has (almost) the lowest priority if
the CPU is running, and the highest if the CPU is STOPPED. This is handled
in SIGP code already. On delivery, we only have to care about the
"CPU running" scenario.
STOP is defined to be delivered after all other interrupts have been
delivered. Therefore it has the actual lowest priority.
As both can wake up a CPU if sleeping, indicate them correctly to
external code (e.g. cpu_has_work()).
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-25-david@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We want to use the same code base for TCG, so let's cleanly factor it
out.
The sigp mutex is currently not really needed, as everything is
protected by the iothread mutex. But this could change later, so leave
it in place and initialize it properly from common code.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-17-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
target/s390x: interpret PSW_MASK_WAIT only for TCG
KVM handles the wait PSW itself and triggers a WAIT ICPT in case it
really wants to sleep (disabled wait).
This will later allow us to change the order of loading a restart
interrupt and setting a CPU to OPERATING on SIGP RESTART without
changing KVM behavior.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-11-david@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
s390x/tcg: handle WAIT PSWs during interrupt injection
If we encounter a WAIT PSW, we have to halt immediately. Using
cpu_loop_exit() at this point feels wrong. Simply leaving
cs->exception_index set doesn't result in an immediate stop.
This is also necessary to properly handle SIGP STOP interrupts later.
The CPU_INTERRUPT_HALT will be processed immediately and properly set
the CPU to halted (also resetting cs->exception_index to EXCP_HLT)
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-10-david@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
s390x/tcg: a CPU cannot switch state due to an interrupt
Going to OPERATING here looks wrong. A CPU should even never be
!OPERATING at this point. Unhalting will already be done in
cpu_handle_halt() if there is work, so we can drop this statement
completely.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-8-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
s390x/tcg: take care of external interrupt subclasses
We can now let go of INTERRUPT_EXT. When cr0 changes, we have to
revalidate if we now have a pending external interrupt, just like
when the PSW (or SYSTEM MASK only) changes.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-6-david@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
s390x/tcg: rework checking for deliverable interrupts
Currently, enabling/disabling of interrupts is not really supported.
Let's improve interrupt handling code by explicitly checking for
deliverable interrupts only. This is the first step. Checking for
external interrupt subclasses will be done next.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-5-david@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
There are still some leftovers from old virtio interrupts in there.
Most importantly, we don't have to queue service interrupts anymore.
Just like KVM, we can simply multiplex the SCLP service interrupts and
avoid the queue.
Also, now only valid parameters/cpu_addr will be stored on service
interrupts.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-3-david@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
External interrupts are currently all handled like floating external
interrupts, they are queued. Let's prepare for a split of floating
and local interrupts by turning INTERRUPT_EXT into a mask.
While we can have various floating external interrupts of one kind, there
is usually only one (or a fixed number) of the local external interrupts.
So turn INTERRUPT_EXT into a mask and properly indicate the kind of
external interrupt. Floating interrupts will have to moved out of
one CPU instance later once we have SMP support.
The only floating external interrupts used right now are SERVICE
interrupts, so let's use that name. Following patches will clean up
SERVICE interrupt injection.
This get's rid of the ugly special handling for cpu timer and clock
comparator interrupts. And we really only store the parameters as
defined by the PoP.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-2-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Halil Pasic [Wed, 4 Oct 2017 15:41:37 +0000 (17:41 +0200)]
s390x/css: be more consistent if broken beyond repair
Calling do_subchannel_work with no function control flags set in SCSW is
a programming error. Currently we handle this differently in
do_subchannel_work_virtual and do_subchannel_work_passthrough. Let's be
consistent and guard with a common assert against this programming error.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20171004154144.88995-2-pasic@linux.vnet.ibm.com> Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Peter Maydell [Fri, 20 Oct 2017 09:49:55 +0000 (10:49 +0100)]
Merge remote-tracking branch 'remotes/stefanberger/tags/pull-tpm-2017-10-19-1' into staging
Merge tpm 2017/10/19 v1
# gpg: Signature made Thu 19 Oct 2017 16:42:39 BST
# gpg: using RSA key 0x75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211
* remotes/stefanberger/tags/pull-tpm-2017-10-19-1: (21 commits)
tpm: move recv_data_callback to TPM interface
tpm: add a QOM TPM interface
tpm-tis: fold TPMTISEmuState in TPMState
tpm-tis: remove tpm_tis.h header
tpm-tis: move TPMState to TIS header
tpm: remove locty_data from TPMState
tpm-emulator: fix error handling
tpm: add TPMBackendCmd to hold the request state
tpm: remove locty argument from receive_cb
tpm: remove needless cast
tpm: remove unused TPMBackendCmd
tpm: remove configure_tpm() hop
tpm: remove init() class method
tpm: remove TPMDriverOps
tpm: move TPMSizedBuffer to tpm_tis.h
tpm: remove tpm_register_driver()
tpm: replace tpm_get_backend_driver() to drop be_drivers
tpm: lookup tpm backend class in tpm_driver_find_by_type()
tpm: make tpm_get_backend_driver() static
tpm-tis: remove RAISE_STS_IRQ
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 19 Oct 2017 17:42:51 +0000 (18:42 +0100)]
Merge remote-tracking branch 'remotes/mcayland/tags/qemu-sparc-signed' into staging
qemu-sparc update
# gpg: Signature made Thu 19 Oct 2017 07:50:16 BST
# gpg: using RSA key 0x5BC2C56FAE0F321F
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>"
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F
* remotes/mcayland/tags/qemu-sparc-signed:
sun4u: fix assert when adding NICs which aren't the in-built model
sun4u: update PCI topology to include simba PCI bridges
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
build: automatically handle GIT submodule checkout for dtc
On my system, I see the following with a fresh clone:
% ./configure --disable-gtk --target-list=aarch64-softmmu
% make -j8
GEN aarch64-softmmu/config-devices.mak.tmp
GEN config-host.h
mkdir -p dtc/libfdt
GIT ui/keycodemapdb dtc
mkdir -p dtc/tests
GEN qemu-options.def
[snip]
GEN migration/trace.h
make: *** [git-submodule-update] Error 1
make: *** Waiting for unfinished jobs....
Upon closer inspection, the root cause of the error is:
% git submodule update --init ui/keycodemapdb dtc
fatal: destination path 'dtc' already exists and is not an empty directory.
Clone of 'git://git.qemu-project.org/dtc.git' into submodule path 'dtc' failed
This patch fixes this race condition by forcing the 'dtc/%' rule which caused
'dtc' to be non-empty to wait on '.git-submodule-status'.
Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1508352023-28591-1-git-send-email-alindsay@codeaurora.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The previous patch cleaned up a bit error handling, and exposed an
existing bug: error_report_err() could be called with a NULL error.
Instead, make tpm_emulator_set_locality() set the error.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
* remotes/bonzini/tags/for-upstream: (29 commits)
scsi: reject configurations with logical block size > physical block size
qdev: defer DEVICE_DEL event until instance_finalize()
Revert "qdev: Free QemuOpts when the QOM path goes away"
qdev: store DeviceState's canonical path to use when unparenting
qemu-pr-helper: use new libmultipath API
watch_mem_write: implement 8-byte accesses
notdirty_mem_write: implement 8-byte accesses
memory: reuse section_from_flat_range()
kvm: simplify kvm_align_section()
kvm: region_add and region_del is not called on updates
kvm: fix error message when failing to unregister slot
kvm: tolerate non-existing slot for log_start/log_stop/log_sync
kvm: fix alignment of ram address
memory: call log_start after region_add
target/i386: trap on instructions longer than >15 bytes
target/i386: introduce x86_ld*_code
tco: add trace events
docs/devel/loads-stores.rst: Document our various load and store APIs
nios2: define tcg_env
build: remove CONFIG_LIBDECNUMBER
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/kraxel/tags/opengl-20171017-pull-request:
egl-headless: add dmabuf support
egl-helpers: add egl_texture_blit and egl_texture_blend
egl-helpers: add dmabuf import support
opengl: add flipping vertex shader
opengl: move shader init from console-gl.c to shader.c
console: add support for dmabufs
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Gerd Hoffmann [Thu, 19 Oct 2017 07:46:29 +0000 (09:46 +0200)]
seabios: update to 1.11 prerelease
This is the seabios update for qemu 2.11. Well, almost, seabios is in
freeze for the upcoming 1.11 release. This updates seabios to current
git master snapshot, and it will be updated again to 1.11 final before
the 2.11 release.
With this two-step seabios gets some more wide testing before the actual
release and the update to 1.11 final (which will most likely happen
after qemu freeze) should have bugfix patches only.
git shortlog
============
Aleksandr Bezzubikov (3):
pci: refactor pci_find_capapibilty to get bdf as the first argument instead of the whole pci_device
pci: add QEMU-specific PCI capability structure
pci: enable RedHat PCI bridges to reserve additional resources on PCI init
Ben Warren (5):
QEMU DMA: Add DMA write capability
romfile-loader: Switch to using named structs
QEMU fw_cfg: Add command to write back address of file
QEMU fw_cfg: Add functions for accessing files by key
QEMU fw_cfg: Write fw_cfg back on S3 resume
Daniel Verkamp (5):
nvme: support NVMe 1.0 controllers
nvme: extend command timeout to 5 seconds
nvme: fix reversed loop condition in cmd_readwrite
nvme: fix extraction of status code bits
nvme: fix copy-paste mistake in comment
Filippo Sironi (1):
nvme: Use the Maximum Queue Entries Supported (MQES) to initialize I/O queues
Gerd Hoffmann (7):
usb: add hub portmap
usb-xhci: use hub portmap
std: add cp437 to unicode map
kbd: make enqueue_key public, add ascii_to_keycode
romfile: add support for constant files.
paravirt: serial console configuration.
add serial console support
Igor Mammedov (1):
drop "etc/boot-cpus" fw_cfg file and reuse legacy QEMU_CFG_NB_CPUS
Jason Wang (1):
virtio: IOMMU support
Julian Stecklina (2):
block: add NVMe boot support
nvme: fix out of memory behavior
Julius Werner (1):
coreboot: Adapt to upstream CBMEM console changes
Kevin O'Connor (26):
usb: Make usb_time_sigatt variable static
tpm: Add comment banners to tcg.c separating major parts of spec
tpm: Don't call tpm_set_failure() from tpm12_get_capability()
tpm: Move code around in tcgbios.c to keep like code together
acpi: Generalize find_fadt() and find_tcpa_by_rsdp() into find_acpi_table()
tpm: Don't call tpm_build_and_send_cmd() from tpm20_stirrandom()
tpm: Rework tpm_build_and_send_cmd() into tpm_simple_cmd()
ps2port: Disable keyboard/mouse prior to resetting ps2 controller
docs: Note release dates for 1.10.1 and 1.10.2
resume: Don't attempt to use generic reboot mechanisms on QEMU
boot: Increase description size in boot menu
src: Minor - remove tab characters that slipped into SeaBIOS C code
NVMe: Allow NVMe to be enabled on real hardware
smm: Backup and restore A20 on an SMI based mode switch
stacks: Make sure to initialize Call16Data
stacks: Don't update the A20 settings if they haven't changed
stacks: There is no need to disable NMI if it is already disabled
vga: Fix bug in stdvga_get_linesize()
docs: Fix typos in Memory_Model.md
tcgbios: Fix use of unitialized variable
boot: Rename drive_g to drive
disk: Don't require the 'struct drive_s' to be in the f-segment
block: Rename disk_op_s->drive_gf to drive_fl
virtio: Allocate drive_s storage in low memory
xhci: Build TRBs directly in xhci_trb_queue()
xhci: Verify the device is still present in xhci_cmd_submit()
Ladi Prosek (1):
ahci: Set upper 32-bit registers to zero
Patrick Rudolph (4):
SeaVGABios/cbvga: Advertise correct pixel format
SeaVGABIOS/vbe: Query driver for scanline pitch v2
SeaVGABios/cbvga: Use active mode to clear screen
SeaVGABios/cbvga: Advertise compatible VESA modes
Paul Menzel (1):
vgasrc: Increase debug level
Petr Berky (1):
config: Add function to check if fw_cfg exists
Ricardo Ribalda Delgado (1):
serialio: Support for mmap serial ports
Roman Kagan (11):
blockcmd: accept only disks and CD-ROMs
blockcmd: generic SCSI luns enumeration
virtio-scsi: enumerate luns with REPORT LUNS
esp-scsi: enumerate luns with REPORT LUNS
usb-uas: enumerate luns with REPORT LUNS
pvscsi: fix the comment about lun enumeration
mpt-scsi: try to enumerate luns with REPORT LUNS
lsi-scsi: reset in case of a serious problem
lsi-scsi: try to enumerate luns with REPORT LUNS
blockcmd: start REPORT_LUNS with the smallest buffer
Revert "lsi-scsi: reset in case of a serious problem"
Stefan Berger (1):
tpm: Log TPM 2 digest structure in little endian format
Youness Alaoui (1):
nvme: Enable NVMe support for non-qemu hardware
Zeh, Werner (1):
ahci: Disable Native Command Queueing
Mark Cave-Ayland [Sun, 15 Oct 2017 09:05:59 +0000 (10:05 +0100)]
sun4u: fix assert when adding NICs which aren't the in-built model
Commit 8d93297 introduced a bug whereby non-inbuilt NICs are realized before
setting the default MAC address causing an assert. Switch NIC creation
over from pci_create_simple() to pci_create() which works exactly the
same except omitting the realize as originally intended.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Mark Cave-Ayland [Sun, 11 Jun 2017 09:12:08 +0000 (10:12 +0100)]
sun4u: update PCI topology to include simba PCI bridges
This patch updates the sun4u model to being much closer to a real Ultra 5
by moving devices behind the 2 simba PCI bridges (A and B) as found on real
hardware.
The most noticeable change introduced by this patchset is that in-built devices
are no longer attached to the PCI root bus, but instead behind PCI bridge A.
Along with this the interrupt routing is updated accordingly to match the
official documentation.
Since the existing code currently bypasses the PCI bridge interrupt
swizzling, the interrupt mapping functions are reorganised so that
pci_pbm_map_irq() is used by the PCI bridges and pci_apb_map_irq() is
used by the PCI host bridge.
Behind the sabre PCI host bridge, the PCI IO space now needs to be
split into two separate halves at 0x8000000. Therefore we also setup a new
PCI IO space region of increased size on the PCI host bridge and enable
32-bit PCI IO accesses to allow IO accesses to reach devices behind PCI
bridge B correctly.
As part of this change we also combine the onboard sunhme NIC and the ebus
into a single multi-function device as done on a real Ultra 5. For other
NICs the existing behaviour is preserved, i.e. we initialise them and
place them into the next free slot on PCI bus B.
Finally we mark the physically unavailable slots (plus slot 0 in busA) as
reserved to ensure that users can't plug devices into non-existent slots
which will break interrupt routing.
Note: since this commit changes PCI topology and interrupt routing, an
updated openbios-sparc64 binary is included with this commit containing the
associated changes to maintain bisectability.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Logical block size of a SCSI disk should never be larger than
physical block size. From an ATA/SCSI perspective, it makes no sense
to have the logical block size greater than the physical block size,
and it cannot even be effectively expressed in the command set. The
whole point of adding the physical block size to the ATA/SCSI command
set was to communicate a desire for a larger block size (than logical),
while maintaining backwards compatibility with legacy 512 byte block
size.
When setting logical_block_size > physical_block_size, QEMU cannot express
it in READ CAPACITY(16) output, and all it can do is set the physical
block exponent to 0 (i.e. logical_block_size == physical_block_size).
Reporting the error properly, however, is better.
Signed-off-by: Mark Kanda <mark.kanda@oracle.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Message-Id: <1508185024-5840-1-git-send-email-mark.kanda@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Michael Roth [Mon, 16 Oct 2017 22:23:15 +0000 (17:23 -0500)]
qdev: defer DEVICE_DEL event until instance_finalize()
DEVICE_DEL is currently emitted when a Device is unparented, as
opposed to when it is finalized. The main design motivation for this
seems to be that after unparent()/unrealize(), the Device is no
longer visible to the guest, and thus the operation is complete
from the perspective of management.
However, there are cases where remaining host-side cleanup is also
pertinent to management. The is generally handled by treating these
resources as aspects of the "backend", which can be managed via
separate interfaces/events, such as blockdev_add/del, netdev_add/del,
object_add/del, etc, but some devices do not have this level of
compartmentalization, namely vfio-pci, and possibly to lend themselves
well to it.
In the case of vfio-pci, the "backend" cleanup happens as part of
the finalization of the vfio-pci device itself, in particular the
cleanup of the VFIO group FD. Failing to wait for this cleanup can
result in tools like libvirt attempting to rebind the device to
the host while it's still being used by VFIO, which can result in
host crashes or other misbehavior depending on the host driver.
Deferring DEVICE_DEL still affords us the ability to manage backends
explicitly, while also addressing cases like vfio-pci's, so we
implement that approach here.
An alternative proposal involving having VFIO emit a separate event
to denote completion of host-side cleanup was discussed, but the
prevailing opinion seems to be that it is not worth the added
complexity, and leaves the issue open for other Device implementations
to solve in the future.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Reviewed-by: Greg Kurz <groug@kaod.org> Tested-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20171016222315.407-4-mdroth@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch originally addressed an issue where a DEVICE_DELETED
event could be emitted (in device_unparent()) before a Device's
QemuOpts were cleaned up (in device_finalize()), leading to a
"duplicate ID" error if management attempted to immediately add
a device with the same ID in response to the DEVICE_DELETED event.
An alternative will be implemented in a subsequent patch where we
defer the DEVICE_DELETED event until device_finalize(), which would
also prevent the race, so we revert the original fix in preparation.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Reviewed-by: Greg Kurz <groug@kaod.org> Tested-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20171016222315.407-3-mdroth@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Michael Roth [Mon, 16 Oct 2017 22:23:13 +0000 (17:23 -0500)]
qdev: store DeviceState's canonical path to use when unparenting
device_unparent(dev, ...) is called when a device is unparented,
either directly, or as a result of a parent device being
finalized, and handles some final cleanup for the device. Part
of this includes emiting a DEVICE_DELETED QMP event to notify
management, which includes the device's path in the composition
tree as provided by object_get_canonical_path().
object_get_canonical_path() assumes the device is still connected
to the machine/root container, and will assert otherwise, but
in some situations this isn't the case:
If the parent is finalized as a result of object_unparent(), it
will still be attached to the composition tree at the time any
children are unparented as a result of that same call to
object_unparent(). However, in some cases, object_unparent()
will complete without finalizing the parent device, due to
lingering references that won't be released till some time later.
One such example is if the parent has MemoryRegion children (which
take a ref on their parent), who in turn have AddressSpace's (which
take a ref on their regions), since those AddressSpaces get cleaned
up asynchronously by the RCU thread.
In this case qdev:device_unparent() may be called for a child Device
that no longer has a path to the root/machine container, causing
object_get_canonical_path() to assert.
Fix this by storing the canonical path during realize() so the
information will still be available for device_unparent() in such
cases.
Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Tested-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20171016222315.407-2-mdroth@linux.vnet.ibm.com>
[Clear dev->canonical_path at the post_realize_fail label, which is
cleaner. Suggested by David Gibson. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 17 Oct 2017 18:11:58 +0000 (20:11 +0200)]
qemu-pr-helper: use new libmultipath API
libmultipath has recently changed its API. The new API supports multi-threaded
clients better. Unfortunately there is no backwards-compatibility, so we just
switch to the new one. Running QEMU compiled with the new library on the old
library will likely crash, while doing the opposite will cause QEMU not to
start at all (because udev, get_multipath_config and put_multipath_config
are undefined).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 17 Oct 2017 12:16:05 +0000 (14:16 +0200)]
watch_mem_write: implement 8-byte accesses
Aligned 8-byte memory writes by a 64-bit target on a 64-bit host should
always turn into atomic 8-byte writes on the host, however a write
write watchpoint would end up tearing the 8-byte write into two 4-byte
writes in access_with_adjusted_size().
Reported-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Andrew Baumann [Fri, 13 Oct 2017 18:19:13 +0000 (11:19 -0700)]
notdirty_mem_write: implement 8-byte accesses
Aligned 8-byte memory writes by a 64-bit target on a 64-bit host should
always turn into atomic 8-byte writes on the host, however if we missed
in the softmmu, and the TLB line was marked as not dirty, then we
would end up tearing the 8-byte write into two 4-byte writes in
access_with_adjusted_size().
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-Id: <20171013181913.7556-1-Andrew.Baumann@microsoft.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We can use section_from_flat_range() instead of manually initializing.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171016144302.24284-8-david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171016144302.24284-7-david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm: region_add and region_del is not called on updates
Attributes are not updated via region_add()/region_del(). Attribute changes
lead to a delete first, followed by a new add.
If this would ever not be the case, we would get an error when trying to
register the new slot.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171016144302.24284-6-david@redhat.com> Tested-by: Joe Clifford <joeclifford@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm: fix error message when failing to unregister slot
"overlapping" is a leftover, let's drop it.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171016144302.24284-5-david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm: tolerate non-existing slot for log_start/log_stop/log_sync
If we want to trap every access to a section, we might not have a
slot. So let's just tolerate if we don't have one.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171016144302.24284-4-david@redhat.com> Tested-by: Joe Clifford <joeclifford@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix the wrong calculation of the delta, used to align the ram address.
This only strikes if alignment has to be done.
Reported-by: Joe Clifford <joeclifford@gmail.com> Fixes: 5ea69c2e3614 ("kvm: factor out alignment of memory section") Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171016144302.24284-3-david@redhat.com> Tested-by: Joe Clifford <joeclifford@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It might be confusing for some listener implementations that implement
both, region_add and log_start (e.g. KVM) if we call log_start before an
actual region was added using region_add.
This makes current KVM code trigger an assertion
("kvm_section_update_flags: error finding slot"). So let's just reverse
the order instead of tolerating log_start on yet unknown regions.
Reported-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171016144302.24284-2-david@redhat.com> Tested-by: Joe Clifford <joeclifford@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The TARGET_MTIOCTOP/TARGET_MTIOCGET/TARGET_MTIOCPOS values
were being defined in terms of host struct types, but
these structures are such that their size might differ
on different hosts. Switch to using a target struct
definition instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Peter Maydell [Tue, 17 Oct 2017 14:26:51 +0000 (15:26 +0100)]
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.11-20171017' into staging
ppc patch queue 2017-10-17
Here's the currently accumulated set of ppc patches for qemu.
* The biggest set here is the ppc parts of Igor Mammedov's cleanups
to cpu model handling
* The above also includes a generic patches which are required as
prerequisites for the ppc parts. They don't seem to have been
merged by Eduardo yet, so I hope they're ok to include here.
* Apart from that it's basically just assorted bug fixes and cleanups
* remotes/dgibson/tags/ppc-for-2.11-20171017: (34 commits)
spapr_cpu_core: rewrite machine type sanity check
spapr_pci: fail gracefully with non-pseries machine types
spapr: Correct RAM size calculation for HPT resizing
ppc: pnv: consolidate type definitions and batch register them
ppc: pnv: drop PnvChipClass::cpu_model field
ppc: pnv: define core types statically
ppc: pnv: drop PnvCoreClass::cpu_oc field
ppc: pnv: normalize core/chip type names
ppc: pnv: use generic cpu_model parsing
ppc: spapr: use generic cpu_model parsing
ppc: move ppc_cpu_lookup_alias() before its first user
ppc: spapr: use cpu model names as tcg defaults instead of aliases
ppc: spapr: register 'host' core type along with the rest of core types
ppc: spapr: use cpu type name directly
ppc: spapr: define core types statically
ppc: move '-cpu foo,compat=xxx' parsing into ppc_cpu_parse_featurestr()
ppc: spapr: replace ppc_cpu_parse_features() with cpu_parse_cpu_model()
ppc: 40p/prep: replace cpu_model with cpu_type
ppc: virtex-ml507: replace cpu_model with cpu_type
ppc: replace cpu_model with cpu_type on ref405ep,taihu boards
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 17 Oct 2017 10:29:51 +0000 (11:29 +0100)]
Merge remote-tracking branch 'remotes/berrange/tags/pull-qio-2017-10-16-1' into staging
Merge QIO 2017/10/16 v1
# gpg: Signature made Mon 16 Oct 2017 17:10:54 BST
# gpg: using RSA key 0xBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>"
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* remotes/berrange/tags/pull-qio-2017-10-16-1:
io: fix mem leak in websock error path
io: add trace points for websocket HTTP protocol headers
io: cope with websock 'Connection' header having multiple values
io: get rid of bounce buffering in websock write path
io: pass a struct iovec into qio_channel_websock_encode
io: get rid of qio_channel_websock_encode helper method
io: simplify websocket ping reply handling
io: monitor encoutput buffer size from websocket GSource
sockets: Handle race condition between binds to the same port
sockets: factor out create_fast_reuse_socket
sockets: factor out a new try_bind() function
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 17 Oct 2017 09:44:23 +0000 (10:44 +0100)]
Merge remote-tracking branch 'remotes/gkurz/tags/for-upstream' into staging
This fixes a potential data leak to the guest.
# gpg: Signature made Mon 16 Oct 2017 16:08:25 BST
# gpg: using DSA key 0x02FC3AEB0101DBC2
# gpg: Good signature from "Greg Kurz <groug@kaod.org>"
# gpg: aka "Greg Kurz <groug@free.fr>"
# gpg: aka "Greg Kurz <gkurz@linux.vnet.ibm.com>"
# gpg: aka "Gregory Kurz (Groug) <groug@free.fr>"
# gpg: aka "[jpeg image of size 3330]"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2BD4 3B44 535E C0A7 9894 DBA2 02FC 3AEB 0101 DBC2
* remotes/gkurz/tags/for-upstream:
9pfs: use g_malloc0 to allocate space for xattr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/kraxel/tags/ui-20171016-pull-request:
gtk: fix wrong id between texture and framebuffer
ui/gtk: Fix deprecation of vte_terminal_copy_clipboard
pc-bios/keymaps: keymaps update
Add pc-bios/keymaps/Makefile
tools: add qemu-keymap
ui: don't export qemu_input_event_new_key
ui: convert key events to QKeyCodes immediately
ui: convert common input code to keycodemapdb
ui: add keycodemapdb repository as a GIT submodule
docker: don't rely on submodules existing in the main checkout
build: automatically handle GIT submodule checkout for dtc
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Gerd Hoffmann [Tue, 10 Oct 2017 13:54:49 +0000 (15:54 +0200)]
opengl: move shader init from console-gl.c to shader.c
With the upcoming dmabuf support in qemu there will be more users of the
shaders than just console-gl.c. So rename ConsoleGLState to
QemuGLShader, rename some functions too, move code from console-gl.c to
shaders.c.
Gerd Hoffmann [Tue, 10 Oct 2017 13:54:48 +0000 (15:54 +0200)]
console: add support for dmabufs
This patch adds support for dma-bufs to the qemu console interfaces.
It adds a new "struct QemuDmaBuf" to represent a dmabuf with accociated
metatdata (size, format). It adds three functions (and
DisplayChangeListenerOps operations) to set a dma-buf as display
scanout, as cursor and to release a dmabuf.
Gerd Hoffmann [Tue, 10 Oct 2017 14:13:22 +0000 (16:13 +0200)]
vga: handle cirrus vbe mode wraparounds.
Commit "3d90c62548 vga: stop passing pointers to vga_draw_line*
functions" is incomplete. It doesn't handle the case that the vga
rendering code tries to create a shared surface, i.e. a pixman image
backed by vga video memory. That can not work in case the guest display
wraps from end of video memory to the start. So force shadowing in that
case. Also adjust the snapshot region calculation.
Can trigger with cirrus only, when programming vbe modes using the bochs
api (stdvga, also qxl and virtio-vga in vga compat mode) wrap arounds
can't happen.
Fixes: CVE-2017-13672 Fixes: 3d90c6254863693a6b13d918d2b8682e08bbc681 Cc: P J P <ppandit@redhat.com> Reported-by: David Buchanan <d@vidbuchanan.co.uk> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20171010141323.14049-3-kraxel@redhat.com
Greg Kurz [Thu, 12 Oct 2017 16:30:14 +0000 (18:30 +0200)]
spapr_pci: fail gracefully with non-pseries machine types
QEMU currently crashes when the user tries to add an spapr-pci-host-bridge
on a non-pseries machine:
$ qemu-system-ppc64 -M ppce500 -device spapr-pci-host-bridge,index=1
hw/ppc/spapr_pci.c:1535:spapr_phb_realize:
Object 0x1003dacae60 is not an instance of type spapr-machine
Aborted (core dumped)
The same thing happens with the deprecated but still available child type
spapr-pci-vfio-host-bridge.
Fix both by checking the machine type with object_dynamic_cast().
Reviewed-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com> Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
David Gibson [Tue, 10 Oct 2017 13:16:57 +0000 (00:16 +1100)]
spapr: Correct RAM size calculation for HPT resizing
In order to prevent the guest from forcing the allocation of large amounts
of qemu memory (or host kernel memory, in the case of KVM HV), we limit
the size of Hashed Page Table (HPT) it is allowed to allocated, based on
its RAM size.
However, the current calculation is not correct: it only adds up the size
of plugged memory, ignoring the base memory size. This patch corrects it.
While we're there, use get_plugged_memory_size() instead of directly
calling pc_existing_dimms_capacity(). The only difference is that it
will abort on failure, which is right: a failure here indicates something
wrong within qemu.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Igor Mammedov [Mon, 9 Oct 2017 19:51:11 +0000 (21:51 +0200)]
ppc: pnv: consolidate type definitions and batch register them
Use a new DEFINE_TYPES() helper to simplify type registration
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Igor Mammedov [Mon, 9 Oct 2017 19:51:10 +0000 (21:51 +0200)]
ppc: pnv: drop PnvChipClass::cpu_model field
deduce core type directly from chip type instead of
maintaining type mapping in PnvChipClass::cpu_model.
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Igor Mammedov [Mon, 9 Oct 2017 19:51:09 +0000 (21:51 +0200)]
ppc: pnv: define core types statically
pnv core type definition doesn't have any fields that
require it to be defined at runtime. So replace code
that fills in TypeInfo at runtime with static TypeInfo
array that does the same at complie time.
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Igor Mammedov [Mon, 9 Oct 2017 19:51:08 +0000 (21:51 +0200)]
ppc: pnv: drop PnvCoreClass::cpu_oc field
deduce cpu type directly from core type instead of
maintaining type mapping in PnvCoreClass::cpu_oc and doing
extra cpu_model parsing in pnv_core_class_init()
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Igor Mammedov [Mon, 9 Oct 2017 19:51:07 +0000 (21:51 +0200)]
ppc: pnv: normalize core/chip type names
typically for cpus/core type names following convention is used
new_type_prefix-superclass_typename
make PNV core/chip to follow common convention.
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
projects / qemu-xen.git / log