des [Fri, 16 Oct 2015 12:21:44 +0000 (12:21 +0000)]
Fix two bugs in HTTPS tunnelling:
- If the proxy returns a non-200 result, set the error code accordingly
so the caller / user gets a somewhat meaningful error message.
- Consume and discard any HTTP response header following the result line.
ed [Fri, 16 Oct 2015 10:26:15 +0000 (10:26 +0000)]
Use the right variable name.
MACHINE_CPUARCH expands to aarch64 for arm64, whereas MACHINE always
corresponds to the directory name under sys/ that contains the sources
for that architecture.
bdrewery [Fri, 16 Oct 2015 05:54:41 +0000 (05:54 +0000)]
Avoid warning race with creating 'ldscripts' directory during build.
In r204548 the 'rm -f ldscripts' was added likely due to reading the
conditional as 'else it is a file'. That seems unlikely though and
the more likely case is just that the directory hasn't been created yet.
Because this races with ,ssother scripts, use 'mkdir -p' which is a minimal
modification vs upstream to avoid the warning of 'File exists' if another
script creates it first. This could replace the 'test -d' as well but
then it's more unneeded change to the upstream script.
imp [Fri, 16 Oct 2015 03:06:02 +0000 (03:06 +0000)]
Do not relocate extents to make them contiguous if the underlying drive can do
deletions. Ability to do deletions is a strong indication that this
optimization will not help performance. It will only generate extra write
traffic. These devices are typically flash based and have a limited number of
write cycles. In addition, making the file contiguous in LBA space doesn't
improve the access times from flash devices because they have no seek time.
bdrewery [Fri, 16 Oct 2015 00:38:05 +0000 (00:38 +0000)]
Rename the /usr/share/doc/legal files to driver.LICENSE to work around
bug of installing 'realtek' and 'intel_iwn' as files rather then as
a 'LICENSE' file in their directories.
Also add obsolete entries for the older names and names that existed in head
for a period of time.
cem [Thu, 15 Oct 2015 23:45:43 +0000 (23:45 +0000)]
NTB: Add variable number MW, DB CB support code
This is a follow-up to r289208: "Xeon Errata Workaround."
Add logic to support a variable number of memory windows and doorbell
callbacks. This was added to the Linux driver in the "Xeon Errata
Workaround" commit, but I skipped it because it didn't look neccessary
at the time. It is needed for future Haswell split-BAR support, so
bring it in now.
A new tunable was added for if_ntb, 'hw.ntb.max_num_clients'. By
default, it is set to zero -- infer the number of clients from the
number of memory windows available from the hardware. Any other
positive value can specify a different number of clients, limited by the
number of doorbell callbacks available (4 under MSI-X, or 15 (Xeon) or
34 (SoC) under legacy INTx).
bdrewery [Thu, 15 Oct 2015 22:49:56 +0000 (22:49 +0000)]
Make installing to a non-existent directory an error.
Before this, if a file was installed to DESTDIR/some/dir and that directory
was missing due to not having ran 'make distrib-dirs' yet, the file would
be installed as 'some/dir'. For something like bsd.incs.mk with INCLUDEDIR
being a sub-directory of /usr/include, this could result in all of the headers
being installed to a file rather than getting a directory of them.
Now it will error that the file/directory does not exist rather than hide
the issue.
Another option being discussed is to implement GNU's install -D flag which
would auto create any missing directories.
This is a mitigation of the problem. The proper order to the build is to
run 'make distrib-dirs' first, but that can be forgotten if building from
a sub-directory after updating the source code to the latest revision.
ed [Thu, 15 Oct 2015 17:50:28 +0000 (17:50 +0000)]
Properly set the return value for casueword to 0 upon success.
While trying to get multithreading working for CloudABI on aarch64, I
noticed that compare-and-exchange operations in kernelspace would always
fail. It turns out that we don't properly set the return value to 0 when
the compare and exchange succeeds.
Approved by: andrew
Differential Revision: https://reviews.freebsd.org/D3899
kib [Thu, 15 Oct 2015 17:40:39 +0000 (17:40 +0000)]
ARM userspace accessors, e.g. {s,f}uword(9), copy{in,out}(9),
casuword(9) and others, use LDRT and STRT instructions to access
memory with the privileges of userspace. If the *RT instruction
faults on the kernel address, then additional checks must be done to
not confuse the VM system with invalid kernel-mode faults.
Put ARM on line with other FreeBSD architectures and disallow usermode
buffers which intersect with the kernel address space in advance,
before any accesses are performed. In other words, vm_fault(9) is no
longer called when e.g. suword(9) stores to invalid (i.e. not
userspace) address.
Also, switch ARM to use fueword(9) and casueword(9).
Note: there is a pending patch in D3617, which adds the special
processing for faults from LDRT and STRT. The addition of the
processing is useful for potential other uses of the instructions and
for completeness, but standard userspace accessors are better served
by not allowing such faults beforehand.
Reviewed by: andrew
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3816
MFC after: 2 weeks
emaste [Thu, 15 Oct 2015 16:19:00 +0000 (16:19 +0000)]
newfs_msdos: rework option parsing to match NetBSD
NetBSD split newfs_msdos in two so that they can reuse the file system
creation part in makefs. This change is a step on the path of bringing
that support to FreeBSD.
Reviewed by: kib, pfg
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3905
mav [Thu, 15 Oct 2015 08:47:32 +0000 (08:47 +0000)]
MFV r289312: 2605 want to resume interrupted zfs send
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed by: Xin Li <delphij@freebsd.org>
Reviewed by: Arne Jansen <sensille@gmx.net>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Matthew Ahrens <mahrens@delphix.com>
For more info, see:
- slides http://www.slideshare.net/MatthewAhrens/openzfs-send-and-receive
- video https://www.youtube.com/watch?v=iY44jPMvxog
- manpage changes (for zfs resume -s and zfs send -t)
- upcoming talk at the OpenZFS Developer Summit
The TL;DR is:
Use "zfs receive -s" to save the partially received state on failure.
On failure, get the receive token with "zfs get receive_resume_token <fs>"
Resume the send with "zfs send -t <token_value>"
adrian [Thu, 15 Oct 2015 04:22:56 +0000 (04:22 +0000)]
Add support for the BCM57765 card reader.
This patch adds support for the BCM57765[2] card reader function included in
Broadcom's BCM57766 ethernet/sd3.0 controller. This controller is commonly
found in laptops and Apple hardware (MBP, iMac, etc).
The BCM57765 chipset is almost fully compatible with the SD3.0 spec, but
does not support deriving a frequency below 781KHz from its default base
clock via the standard SD3.0-configured 10-bit clock divisor.
If such a divisor is set, card identification (which requires a 400KHz
clock frequency) will time out[1].
As a work-around, I've made use of an undocumented device-specific clock
control register to switch the controller to a 63MHz clock source when
targeting clock speeds below 781KHz; the clock source is likewise switched
back to the 200MHz clock when targeting speeds greater than 781KHz.
Additionally, this patch fixes a small sdhci_pci bug; the
sdhci_pci_softc->quirks flag was not copied to the sdhci_slot, resulting in
`quirk` behavior not being applied by sdhci.c.
[1] A number of Linux/FreeBSD users have noted that bringing up the chipsets'
associated ethernet interface will allow SD cards to enumerate (slowly).
This is a controller implementation side-effect triggered by the ethernet
driver's reading of the hardware statistics registers.
[2] This may also fix card detection when using the BCM57785 chipset, but I
don't have access to the BCM57785 chipset and can't verify.
I actually snagged some BCM57785 hardware recently (2012 Retina MacBook Pro)
and can confirm that this also fixes card enumeration with the BCM57785
chipset; with the patch, I can boot off of the internal sdcard reader.
bz [Thu, 15 Oct 2015 01:51:10 +0000 (01:51 +0000)]
2nd try, after r289319:
HWPMC depends on pmu.c even if device pmu is not specified.
Would be great if we could just automatically enabled "device pmu"
if we try to compile in HWPMC.
Also several old kernel cnfigurations seem to have HWPMC enabled but are
pre-FDT and thus fail. So make pmu.c depend on fdt in case of hwpmc as
well.
cem [Wed, 14 Oct 2015 23:48:16 +0000 (23:48 +0000)]
NTB: MFV 1db97f25: Pull out platform detection logic
Pull out read of PPD and platform detection logic to new functions,
ntb_detect_xeon(), ntb_detect_soc(). No functional change -- mostly
this is just shuffling the code to more closely match the Linux driver.
Linux commit log:
To simplify some of the platform detection code. Move the platform
detection to a function to be called earlier.
Authored by: Dave Jiang
Obtained from: Linux (Dual BSD/GPL driver)
Sponsored by: EMC / Isilon Storage Division
cem [Wed, 14 Oct 2015 23:48:03 +0000 (23:48 +0000)]
NTB: Abstract doorbell register access
The doorbell registers (and associated mask) are 16-bit on Xeon but
64-bit on SoC. Abstract IO access to doorbell registers with
'db_ioread' and 'db_iowrite' (names and idea borrowed from the dual
BSD/GPL Linux driver).
cem [Wed, 14 Oct 2015 23:47:52 +0000 (23:47 +0000)]
if_ntb: MFV 3cc5ba19: Add alignment check to meet hardware requirement
Original Linux commit log:
The NTB translate register must have the value to be BAR size aligned.
This alignment check make sure that the DMA memory allocated has the
proper alignment. Another requirement for NTB to function properly with
memory window BAR size greater or equal to 4M is to use the CMA feature
in 3.16 kernel with the appropriate CONFIG_CMA_ALIGNMENT and
CONFIG_CMA_SIZE_MBYTES set.
Authored by: Dave Jiang
Obtained from: Linux (Dual BSD/GPL driver)
Sponsored by: EMC / Isilon Storage Division
cem [Wed, 14 Oct 2015 23:47:35 +0000 (23:47 +0000)]
NTB: MFV a1413cfb: correct the spread of queues over mw's
The detection of an uneven number of queues on the given memory windows
was not correct. The mw_num is zero based and the mod should be
division to spread them evenly over the mw's.
Authored by: Jon Mason
Obtained from: Linux (Dual BSD/GPL driver)
Sponsored by: EMC / Isilon Storage Division
cem [Wed, 14 Oct 2015 23:47:23 +0000 (23:47 +0000)]
NTB: Remap MSI-X messages over available slots
Remap MSI-X messages over available slots rather than falling back to
legacy INTx when fewer MSI-X slots are available than were requested.
N.B. the Linux driver does *not* do this.
To aid in testing, a tunable 'hw.ntb.force_remap_mode' has been added.
It defaults to off (0). When the tunable is enabled and sufficient
slots were available, the driver restricts the number of slots by one
and remaps the MSI-X messages over the remaining slots.
In case this is actually not okay (as I don't yet have access to this
hardware to test), a tunable 'hw.ntb.prefer_intx_to_remap' has been
added. It defaults to off (0). When the tunable is enabled and fewer
slots are available than requested, fall back to legacy INTx mode rather
than attempting to remap MSI-X messages.
cem [Wed, 14 Oct 2015 23:46:15 +0000 (23:46 +0000)]
NTB: MFV 53a788a7: Split ntb_setup_interrupts() into SOC, Xeon, and legacy routines
The names don't line up 100% with Linux. Our routines are named
ntb_setup_interrupts, ntb_setup_xeon_msix, ntb_setup_soc_msix, and
ntb_setup_legacy_interrupt. Linux SNB = FreeBSD Xeon; Linux BWD =
FreeBSD SOC. Original Linux commit log:
This is an cleanup effort to make ntb_setup_msix() more readable - use
ntb_setup_bwd_msix() to init MSI-Xs on BWD hardware and
ntb_setup_snb_msix() - on SNB hardware.
Function ntb_setup_snb_msix() also initializes MSI-Xs the way it should
has been done - looping pci_enable_msix() until success or failure.
Authored by: Alexander Gordeev
Obtained from: Linux (Dual BSD/GPL driver)
Sponsored by: EMC / Isilon Storage Division
gjb [Wed, 14 Oct 2015 22:33:11 +0000 (22:33 +0000)]
Deprecate MD5 checksum generation in favor of SHA512.
This was discussed during the 10.2-RELEASE cycle, however
since we were nearing the end of the cycle, we decided to
defer this change until after 10.2-RELEASE.
Reminded by: so (delphij), jmg
MFC after: 5 days
Sponsored by: The FreeBSD Foundation
bdrewery [Wed, 14 Oct 2015 20:30:32 +0000 (20:30 +0000)]
Recurse on 'buildconfig' and 'installconfig'. Remove the 'config' pseudo target.
The 'config' target isn't really needed right now so just remove it to avoid
any clashes with config(8) building. It's also likely misspelled and should
be 'configs' if we decide to add it back. This was just a convenience
target recently added.
ngie [Wed, 14 Oct 2015 20:22:12 +0000 (20:22 +0000)]
Fix test-fenv:test_dfl_env when run on some amd64 CPUs
Compare the fields that the AMD [1] and Intel [2] specs say will be
set once fnstenv returns.
Not all amd64 capable processors zero out the env.__x87.__other field
(example: AMD Opteron 6308). The AMD64/x64 specs aren't explicit on what the
env.__x87.__other field will contain after fnstenv is executed, so the values
in env.__x87.__other could be filled with arbitrary data depending on how the
CPU-specific implementation of fnstenv.
bz [Wed, 14 Oct 2015 18:53:34 +0000 (18:53 +0000)]
Revert r289319 as it seems some ARM kernels include HWPMC but no FDT.
To me that seems broken as certain interrupts will never be handled
properly. I'll re-open D3877 and we can seek a better solution and
try again. For now go back to that state and avoid compile time errors.
bz [Wed, 14 Oct 2015 18:30:04 +0000 (18:30 +0000)]
Properly define functions withut argument and wrap for { for style purposes
as followed in the rest of the file. This will hopefully make gcc more happy.
kib [Wed, 14 Oct 2015 18:27:35 +0000 (18:27 +0000)]
Allow PT_INTERP and PT_NOTES segments to be located anywhere in the
executable image. Keep one page (arbitrary) limit on the max allowed
size of the PT_NOTES.
The ELF image activators still require that program headers of the
executable are fully contained in the first page of the image file.
Reviewed by: emaste, jhb
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D3871
bz [Wed, 14 Oct 2015 17:20:19 +0000 (17:20 +0000)]
Now that we can detect the Cortex-A8 properly, fix the event list
according to the Cortex-A8 TRM r3p2 section 3.2.49.
The A8 list differs from the "ARM-v7 common" list, given the A8
was an earlier model.
There is still more work to be done for other Cortex-Ax version as
andrew points out, but I am just trying to fix A8 for now for teaching.
bz [Wed, 14 Oct 2015 17:07:24 +0000 (17:07 +0000)]
HWPMC depends on pmu.c even if device pmu is not specified.
Would be great if we could just automatically enabled "device pmu"
if we try to compile in HWPMC.
kp [Wed, 14 Oct 2015 16:21:41 +0000 (16:21 +0000)]
pf: Fix TSO issues
In certain configurations (mostly but not exclusively as a VM on Xen) pf
produced packets with an invalid TCP checksum.
The problem was that pf could only handle packets with a full checksum. The
FreeBSD IP stack produces TCP packets with a pseudo-header checksum (only
addresses, length and protocol).
Certain network interfaces expect to see the pseudo-header checksum, so they
end up producing packets with invalid checksums.
To fix this stop calculating the full checksum and teach pf to only update TCP
checksums if TSO is disabled or the change affects the pseudo-header checksum.
vangyzen [Wed, 14 Oct 2015 14:26:44 +0000 (14:26 +0000)]
resolver: automatically reload /etc/resolv.conf
On each resolver query, use stat(2) to see if the modification time
of /etc/resolv.conf has changed. If so, reload the file and reinitialize
the resolver library. However, only call stat(2) if at least two seconds
have passed since the last call to stat(2), since calling it on every
query could kill performance.
This new behavior is enabled by default. Add a "reload-period" option
to disable it or change the period of the test.
Document this behavior and option in resolv.conf(5).
mav [Wed, 14 Oct 2015 10:38:05 +0000 (10:38 +0000)]
MFV r289308: 6267 dn_bonus evicted too early
Reviewed by: Richard Yao <ryao@gentoo.org>
Reviewed by: Xin LI <delphij@freebsd.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Justin T. Gibbs <gibbs@FreeBSD.org>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Matthew Ahrens <mahrens@delphix.com>
mav [Wed, 14 Oct 2015 07:50:08 +0000 (07:50 +0000)]
MFV r289298: 6286 ZFS internal error when set large block on bootfs
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
mav [Wed, 14 Oct 2015 07:45:44 +0000 (07:45 +0000)]
MFV r289296: 6288 dmu_buf_will_dirty could be faster
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Justin Gibbs <gibbs@scsiguy.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
hiren [Wed, 14 Oct 2015 06:57:28 +0000 (06:57 +0000)]
Fix an unnecessarily aggressive behavior where mtu clamping begins on first
retransmission timeout (rto) when blackhole detection is enabled. Make
sure it only happens when the second attempt to send the same segment also fails
with rto.
Also make sure that each mtu probing stage (usually 1448 -> 1188 -> 524) follows
the same pattern and gets 2 chances (rto) before further clamping down.
Note: RFC4821 doesn't specify implementation details on how this situation
should be handled.
bdrewery [Wed, 14 Oct 2015 05:50:16 +0000 (05:50 +0000)]
Fix support for building a PROG_CXX, and PROG, directly.
For example in lib/atf/libatf-c++/tests/detail it is now possible to
run 'make application_test'. This was intended to worked for PROGS,
but lacked support for PROGS_CXX.
Also fix redefining the main PROG target to recurse. This isn't needed
since the main process is setting PROG/PROG_CXX to handle it directly
via bsd.prog.mk.
bdrewery [Wed, 14 Oct 2015 04:42:05 +0000 (04:42 +0000)]
Follow-up r288218 by ensuring common objects are built before recursing.
Some example where this is a problem:
lib/atf/libatf-c++/tests/Makefile:SRCS.${_T}= ${_T}.cpp test_helpers.cpp
lib/atf/libatf-c++/tests/detail/Makefile:SRCS.${_T}= ${_T}.cpp test_helpers.cpp
lib/atf/libatf-c/tests/Makefile:SRCS.${_T}= ${_T}.c test_helpers.c
lib/atf/libatf-c/tests/detail/Makefile:SRCS.${_T}= ${_T}.c test_helpers.c
lib/libpam/libpam/tests/Makefile:SRCS.${test} = ${test}.c ${COMMONSRC}
A similar change may be needed for FILES, SCRIPTS, or INCS, but for now stay
with just SRCS.
bdrewery [Wed, 14 Oct 2015 02:37:30 +0000 (02:37 +0000)]
Replace the out-of-place includes/files/config handling in bsd.subdir.mk with
more typical ALL_SUBDIR_TARGETS entries and target hooks in bsd.incs.mk,
bsd.files.mk and bsd.confs.mk.
This allows the targets to be NOPs if unneeded and still work with the
shortcut 'make includes' to build and then install in a parallel-safe manner.
Sort and re-indent the ALL_SUBDIR_TARGETS with the new entries.
Enable Snoop from Primary to Secondary side on BAR23 and BAR45 on all
TLPs. Previously, Snoop was only enabled from Secondary to Primary
side. This can have a performance improvement on some workloads.
Also, make the code more obvious about how the link is being enabled.
Authored by: Jon Mason
Obtained from: Linux (Dual BSD/GPL driver)
Sponsored by: EMC / Isilon Storage Division
jeff [Wed, 14 Oct 2015 02:10:07 +0000 (02:10 +0000)]
Parallelize the buffer cache and rewrite getnewbuf(). This results in a
8x performance improvement in a micro benchmark on a 4 socket machine.
- Get buffer headers from a per-cpu uma cache that sits in from of the
free queue.
- Use a per-cpu quantum cache in vmem to eliminate contention for kva.
- Use multiple clean queues according to buffer cache size to eliminate
clean queue lock contention.
- Introduce a bufspace daemon that attempts to prevent getnewbuf() callers
from blocking or doing direct recycling.
- Close some bufspace allocation races that could lead to endless
recycling.
- Further the transition to a more modern style of small functions grouped
by prefix in order to improve growing complexity.
hiren [Wed, 14 Oct 2015 00:35:37 +0000 (00:35 +0000)]
There are times when it would be really nice to have a record of the last few
packets and/or state transitions from each TCP socket. That would help with
narrowing down certain problems we see in the field that are hard to reproduce
without understanding the history of how we got into a certain state. This
change provides just that.
It saves copies of the last N packets in a list in the tcpcb. When the tcpcb is
destroyed, the list is freed. I thought this was likely to be more
performance-friendly than saving copies of the tcpcb. Plus, with the packets,
you should be able to reverse-engineer what happened to the tcpcb.
To enable the feature, you will need to compile a kernel with the TCPPCAP
option. Even then, the feature defaults to being deactivated. You can activate
it by setting a positive value for the number of captured packets. You can do
that on either a global basis or on a per-socket basis (via a setsockopt call).
There is no way to get the packets out of the kernel other than using kmem or
getting a coredump. I thought that would help some of the legal/privacy concerns
regarding such a feature. However, it should be possible to add a future effort
to export them in PCAP format.
I tested this at low scale, and found that there were no mbuf leaks and the peak
mbuf usage appeared to be unchanged with and without the feature.
The main performance concern I can envision is the number of mbufs that would be
used on systems with a large number of sockets. If you save five packets per
direction per socket and have 3,000 sockets, that will consume at least 30,000
mbufs just to keep these packets. I tried to reduce the concerns associated with
this by limiting the number of clusters (not mbufs) that could be used for this
feature. Again, in my testing, that appears to work correctly.
Differential Revision: D3100
Submitted by: Jonathan Looney <jlooney at juniper dot net>
Reviewed by: gnn, hiren
cem [Tue, 13 Oct 2015 23:42:13 +0000 (23:42 +0000)]
NTB: MFV fca4d518: Fix ntb_transport link down race
A WARN_ON is being hit in ntb_qp_link_work due to the NTB transport link
being down while the ntb qp link is still active. This is caused by the
transport link being brought down prior to the qp link worker thread
being terminated. To correct this, shutdown the qp's prior to bringing
the transport link down. Also, only call the qp worker thread if it is
in interrupt context, otherwise call the function directly.
Authored by: Jon Mason
Obtained from: Linux (Dual BSD/GPL driver)
Sponsored by: EMC / Isilon Storage Division
The Xeon NTB-RP setup, the transparent side does not get a link up/down
interrupt. Since the presence of a NTB device on the transparent side
means that we have a NTB link up, we can work around the lack of an
interrupt by simply calling the link up function to notify the upper
layers.
Authored by: Jon Mason
Obtained from: Linux (Dual BSD/GPL driver)
Sponsored by: EMC / Isilon Storage Division
projects / people / julieng / freebsd.git / log