From: Bin Meng <bin.meng@windriver.com>
Date: Thu, 28 Jan 2021 06:30:28 +0000 (+0800)
Subject: hw/sd: sd: Remove duplicated codes in single/multiple block read/write
X-Git-Tag: qemu-xen-4.16.0-rc4~323^2~16
X-Git-Url: http://xenbits.xensource.com/gitweb?a=commitdiff_plain;h=cdf6701bcc71331f8d0744c7f4c3cb309c71d541;p=qemu-xen.git

hw/sd: sd: Remove duplicated codes in single/multiple block read/write

The single block read (CMD17) codes are the same as the multiple
block read (CMD18). Merge them into one. The same applies to single
block write (CMD24) and multiple block write (CMD25).

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20210128063035.15674-3-bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---

diff --git a/hw/sd/sd.c b/hw/sd/sd.c
index 8517dbce8b..a85a821abb 100644
--- a/hw/sd/sd.c
+++ b/hw/sd/sd.c
@@ -1181,24 +1181,6 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req)
         break;
 
     case 17:	/* CMD17:  READ_SINGLE_BLOCK */
-        switch (sd->state) {
-        case sd_transfer_state:
-
-            if (addr + sd->blk_len > sd->size) {
-                sd->card_status |= ADDRESS_ERROR;
-                return sd_r1;
-            }
-
-            sd->state = sd_sendingdata_state;
-            sd->data_start = addr;
-            sd->data_offset = 0;
-            return sd_r1;
-
-        default:
-            break;
-        }
-        break;
-
     case 18:	/* CMD18:  READ_MULTIPLE_BLOCK */
         switch (sd->state) {
         case sd_transfer_state:
@@ -1245,35 +1227,6 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req)
 
     /* Block write commands (Class 4) */
     case 24:	/* CMD24:  WRITE_SINGLE_BLOCK */
-        switch (sd->state) {
-        case sd_transfer_state:
-            /* Writing in SPI mode not implemented.  */
-            if (sd->spi)
-                break;
-
-            if (addr + sd->blk_len > sd->size) {
-                sd->card_status |= ADDRESS_ERROR;
-                return sd_r1;
-            }
-
-            sd->state = sd_receivingdata_state;
-            sd->data_start = addr;
-            sd->data_offset = 0;
-            sd->blk_written = 0;
-
-            if (sd_wp_addr(sd, sd->data_start)) {
-                sd->card_status |= WP_VIOLATION;
-            }
-            if (sd->csd[14] & 0x30) {
-                sd->card_status |= WP_VIOLATION;
-            }
-            return sd_r1;
-
-        default:
-            break;
-        }
-        break;
-
     case 25:	/* CMD25:  WRITE_MULTIPLE_BLOCK */
         switch (sd->state) {
         case sd_transfer_state: