From: Gerd Hoffmann <kraxel@redhat.com>
Date: Wed, 4 May 2016 16:43:36 +0000 (+0100)
Subject: vga: make sure vga register setup for vbe stays intact (CVE-2016-3712).
X-Git-Url: http://xenbits.xensource.com/gitweb?a=commitdiff_plain;h=c97c20f71240a538a19cb6b0e598bc1bbd5168f1;p=qemu-xen.git

vga: make sure vga register setup for vbe stays intact (CVE-2016-3712).

Call vbe_update_vgaregs() when the guest touches GFX, SEQ or CRT
registers, to make sure the vga registers will always have the
values needed by vbe mode.  This makes sure the sanity checks
applied by vbe_fixup_regs() are effective.

Without this guests can muck with shift_control, can turn on planar
vga modes or text mode emulation while VBE is active, making qemu
take code paths meant for CGA compatibility, but with the very
large display widths and heigts settable using VBE registers.

Which is good for one or another buffer overflow.  Not that
critical as they typically read overflows happening somewhere
in the display code.  So guests can DoS by crashing qemu with a
segfault, but it is probably not possible to break out of the VM.

upstream-commit-id: fd3c136b3e1482cd0ec7285d6bc2a3e6a62c38d7

Fixes: CVE-2016-3712
Reported-by: Zuozhi Fzz <zuozhi.fzz@alibaba-inc.com>
Reported-by: P J P <ppandit@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
---

diff --git a/hw/vga.c b/hw/vga.c
index 1ac8083d30..17b389e44f 100644
--- a/hw/vga.c
+++ b/hw/vga.c
@@ -169,6 +169,8 @@ static uint8_t expand4to8[16];
 static void vga_screen_dump(void *opaque, const char *filename, bool cswitch,
                             Error **errp);
 
+static void vbe_update_vgaregs(VGACommonState *s);
+
 static inline bool vbe_enabled(VGACommonState *s)
 {
     return s->vbe_regs[VBE_DISPI_INDEX_ENABLE] & VBE_DISPI_ENABLED;
@@ -515,6 +517,7 @@ void vga_ioport_write(void *opaque, uint32_t addr, uint32_t val)
         printf("vga: write SR%x = 0x%02x\n", s->sr_index, val);
 #endif
         s->sr[s->sr_index] = val & sr_mask[s->sr_index];
+        vbe_update_vgaregs(s);
         if (s->sr_index == VGA_SEQ_CLOCK_MODE) {
             s->update_retrace_info(s);
         }
@@ -546,6 +549,7 @@ void vga_ioport_write(void *opaque, uint32_t addr, uint32_t val)
         printf("vga: write GR%x = 0x%02x\n", s->gr_index, val);
 #endif
         s->gr[s->gr_index] = val & gr_mask[s->gr_index];
+        vbe_update_vgaregs(s);
         vga_update_memory_access(s);
         break;
     case VGA_CRT_IM:
@@ -564,10 +568,12 @@ void vga_ioport_write(void *opaque, uint32_t addr, uint32_t val)
             if (s->cr_index == VGA_CRTC_OVERFLOW) {
                 s->cr[VGA_CRTC_OVERFLOW] = (s->cr[VGA_CRTC_OVERFLOW] & ~0x10) |
                     (val & 0x10);
+                vbe_update_vgaregs(s);
             }
             return;
         }
         s->cr[s->cr_index] = val;
+        vbe_update_vgaregs(s);
 
         switch(s->cr_index) {
         case VGA_CRTC_H_TOTAL: