From: Anthony PERARD <anthony.perard@citrix.com>
Date: Fri, 29 Jul 2022 13:39:52 +0000 (+0100)
Subject: ts-libvirt-build: Rework to build with meson
X-Git-Url: http://xenbits.xensource.com/gitweb?a=commitdiff_plain;h=8510c7dfaf593c2eaae9970a41079dca2a009183;p=osstest.git

ts-libvirt-build: Rework to build with meson

libvirt have switch build system to Meson + Ninja, there is no more
autogen.sh script.

Add missing dependency "libtirpc-dev" and "meson".

libvirt needs at least meson 0.54, the version avaiable in Debian
Buster is too old, but we can install it from backports.

In order to find out if Meson is used or not, we'll check if the
"autogen.sh" script is missing. And in the build dir, we will look for
a "Makefile".

Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
---

diff --git a/ts-libvirt-build b/ts-libvirt-build
index e799f00..16b45cf 100755
--- a/ts-libvirt-build
+++ b/ts-libvirt-build
@@ -50,32 +50,56 @@ sub config() {
     }
     die "no xen prefix" unless $xenprefix;
 
-    # Uses --no-git because otherwise autogen.sh will undo
-    # submodulefixup's attempts to honour
-    # revision_libvirt_gnulib. This in turn requires that we specify
-    # --gnulib-srcdir, but ./autogen.sh doesn't propagate
-    # --gnulib-srcdir to ./bootstap so we use GNULIB_SRCDIR directly.
-    my $gnulib = submodule_find($submodules, "gnulib");
-    target_cmd_build($ho, 3600, $builddir, <<END);
-        cd libvirt
-	mkdir build
-	cd build
-        CFLAGS="-g -I$xenprefix/include/" \\
-        LDFLAGS="-g -L$xenprefix/lib/ -Wl,-rpath-link=$xenprefix/lib/" \\
-        PKG_CONFIG_PATH="$xenprefix/lib/pkgconfig/" \\
-        GNULIB_SRCDIR=$builddir/libvirt/$gnulib->{Path} \\
-            ../autogen.sh --no-git \\
-                         --with-libxl --without-xen --without-xenapi --without-selinux \\
-                         --without-lxc --without-vbox --without-uml \\
-                         --without-qemu --without-openvz --without-vmware \\
-                         --sysconfdir=/etc --localstatedir=/var #/
+    my $cflags = "-g -I$xenprefix/include/";
+    my $ldflags = "-g -L$xenprefix/lib/ -Wl,-rpath-link=$xenprefix/lib/";
+    my $pkg_config_path = "$xenprefix/lib/pkgconfig/";
+
+    if (target_file_exists($ho, "$builddir/libvirt/autogen.sh")) {
+        # Uses --no-git because otherwise autogen.sh will undo
+        # submodulefixup's attempts to honour
+        # revision_libvirt_gnulib. This in turn requires that we specify
+        # --gnulib-srcdir, but ./autogen.sh doesn't propagate
+        # --gnulib-srcdir to ./bootstap so we use GNULIB_SRCDIR directly.
+        my $gnulib = submodule_find($submodules, "gnulib");
+        target_cmd_build($ho, 3600, $builddir, <<END);
+            cd libvirt
+            mkdir build
+            cd build
+            CFLAGS="$cflags" \\
+            LDFLAGS="$ldflags" \\
+            PKG_CONFIG_PATH="$pkg_config_path" \\
+            GNULIB_SRCDIR=$builddir/libvirt/$gnulib->{Path} \\
+                ../autogen.sh --no-git \\
+                             --with-libxl --without-xen --without-xenapi --without-selinux \\
+                             --without-lxc --without-vbox --without-uml \\
+                             --without-qemu --without-openvz --without-vmware \\
+                             --sysconfdir=/etc --localstatedir=/var #/
+END
+    } else {
+        target_cmd_build($ho, 3600, $builddir, <<END);
+            cd libvirt
+            meson setup \\
+                -Dc_args='$cflags' \\
+                -Dc_link_args='$ldflags' \\
+                --pkg-config-path='$pkg_config_path' \\
+                --auto-features=disabled \\
+                -Ddriver_libxl=enabled \\
+                -Ddriver_libvirtd=enabled \\
+                -Ddriver_remote=enabled \\
+                --sysconfdir=/etc --localstatedir=/var \\
+                build
 END
+    }
 }
 
 sub build() {
     target_cmd_build($ho, 3600, $builddir, <<END);
         cd libvirt/build
-        (make $makeflags 2>&1 && touch ../../build-ok-stamp) |tee ../log
+        if [ -e Makefile ]; then
+            (make $makeflags 2>&1 && touch ../../build-ok-stamp) |tee ../log
+        else
+            (ninja 2>&1 && touch ../../build-ok-stamp) |tee ../log
+        fi
         test -f ../../build-ok-stamp #/
         echo ok.
 END
@@ -85,7 +109,11 @@ sub install() {
     target_cmd_build($ho, 300, $builddir, <<END);
         mkdir -p dist
         cd libvirt/build
-        make $makeflags install DESTDIR=$builddir/dist
+        if [ -e Makefile ]; then
+            make $makeflags install DESTDIR=$builddir/dist
+        else
+            DESTDIR=$builddir/dist ninja install
+        fi
         mkdir -p $builddir/dist/etc/init.d
 END
     target_putfilecontents_stash($ho, 60,
diff --git a/ts-xen-build-prep b/ts-xen-build-prep
index e76c025..3ae8f21 100755
--- a/ts-xen-build-prep
+++ b/ts-xen-build-prep
@@ -199,7 +199,7 @@ END
 sub prep () {
     my @packages = qw(mercurial rsync figlet
                       build-essential bin86 bcc iasl bc
-                      flex bison cmake ninja-build
+                      flex bison cmake ninja-build meson
                       libpci-dev libncurses5-dev libssl-dev python-dev
                       libx11-dev git-core uuid-dev gettext gawk
                       libsdl-dev libyajl-dev libaio-dev libpixman-1-dev
@@ -209,6 +209,7 @@ sub prep () {
                       libdevmapper-dev libxml-xpath-perl libelf-dev
                       ccache nasm checkpolicy ebtables
 		      python3-docutils python3-dev
+                      libtirpc-dev
                       libgnutls28-dev);
 
     if ($ho->{Suite} =~ m/squeeze|wheezy|jessie/) {
@@ -251,6 +252,11 @@ END
         target_install_packages($ho, 'libc6-dev-i386');
     }
 
+    if ($ho->{Suite} =~ m/buster/) {
+        # libvirt needs a newer version of "meson"
+        target_install_packages_backport($ho, 'meson');
+    }
+
     some_extradebs($ho, [ 'DebianExtraPackages', 'build', $ho->{Suite} ]);
 }