From: Paolo Bonzini Date: Tue, 7 Aug 2012 13:01:29 +0000 (+0200) Subject: acpi: LNKS is not needed X-Git-Tag: rel-1.7.2~78 X-Git-Url: http://xenbits.xensource.com/gitweb?a=commitdiff_plain;h=4540409d19a4baeec5006d925cfca19f8038a96e;p=seabios.git acpi: LNKS is not needed LNKS is a bit strange in that it reuses the same PIIX register as LNKA, but has a different interrupt. This means that the _CRS it returns will not be one of the possible resources from _PRS. This shows up in the Linux boot logs as ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0 Instead of that, we can simply use a hardwired interrupt index. Cc: Gleb Natapov Cc: Laszlo Ersek Signed-off-by: Paolo Bonzini --- diff --git a/src/acpi-dsdt.dsl b/src/acpi-dsdt.dsl index 72dc7d8..d2575a5 100644 --- a/src/acpi-dsdt.dsl +++ b/src/acpi-dsdt.dsl @@ -86,7 +86,10 @@ DefinitionBlock ( #define prt_slot3(nr) prt_slot(nr, LNKC, LNKD, LNKA, LNKB) prt_slot0(0x0000), /* Device 1 is power mgmt device, and can only use irq 9 */ - prt_slot(0x0001, LNKS, LNKB, LNKC, LNKD), + Package() { 0x1ffff, 0, 0, 9 }, + Package() { 0x1ffff, 1, LNKB, 0 }, + Package() { 0x1ffff, 2, LNKC, 0 }, + Package() { 0x1ffff, 3, LNKD, 0 }, prt_slot2(0x0002), prt_slot3(0x0003), prt_slot0(0x0004), @@ -651,17 +654,6 @@ DefinitionBlock ( Method (_CRS, 0, NotSerialized) { Return (IQCR(PRQ3)) } Method (_SRS, 1, NotSerialized) { SETIRQ(PRQ3, Arg0) } } - Device(LNKS) { - Name(_HID, EISAID("PNP0C0F")) // PCI interrupt link - Name(_UID, 5) - Name(_PRS, ResourceTemplate() { - Interrupt (, Level, ActiveHigh, Shared) - { 9 } - }) - Method (_STA, 0, NotSerialized) { Return (IQST(PRQ0)) } - Method (_DIS, 0, NotSerialized) { DISIRQ(PRQ0) } - Method (_CRS, 0, NotSerialized) { Return (IQCR(PRQ0)) } - } } /****************************************************************