From: Kevin O'Connor <kevin@koconnor.net>
Date: Thu, 1 Jan 2015 17:51:04 +0000 (-0500)
Subject: ehci: Simplify fillTDbuffer() and rename
X-Git-Tag: rel-1.8.0~14
X-Git-Url: http://xenbits.xensource.com/gitweb?a=commitdiff_plain;h=1bd976b7befb7d65cbfa778ba2eb03e30cb76068;p=seabios.git

ehci: Simplify fillTDbuffer() and rename

Simplify the calculation of the maximum transfer size per qtd,
simplify the fillTDbuffer() function so that it only fills the buffer
pointers, and rename fillTDbuffer() to ehci_fill_tdbuf().

Also, don't modify 'data' or 'datasize' so that usb_xfer_time() can
use 'datasize' at the end of the function.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
---

diff --git a/src/hw/usb-ehci.c b/src/hw/usb-ehci.c
index 3fd261e..22e58a4 100644
--- a/src/hw/usb-ehci.c
+++ b/src/hw/usb-ehci.c
@@ -8,6 +8,7 @@
 #include "config.h" // CONFIG_*
 #include "output.h" // dprintf
 #include "malloc.h" // free
+#include "memmap.h" // PAGE_SIZE
 #include "pci.h" // pci_bdf_to_bus
 #include "pci_ids.h" // PCI_CLASS_SERIAL_USB_UHCI
 #include "pci_regs.h" // PCI_BASE_ADDRESS_0
@@ -530,26 +531,12 @@ ehci_wait_td(struct ehci_pipe *pipe, struct ehci_qtd *td, u32 end)
     return 0;
 }
 
-static int
-fillTDbuffer(struct ehci_qtd *td, u16 maxpacket, const void *buf, int bytes)
+static void
+ehci_fill_tdbuf(struct ehci_qtd *td, u32 dest, int transfer)
 {
-    u32 dest = (u32)buf;
-    u32 *pos = td->buf;
-    while (bytes) {
-        if (pos >= &td->buf[ARRAY_SIZE(td->buf)])
-            // More data than can transfer in a single qtd - only use
-            // full packets to prevent a babble error.
-            return ALIGN_DOWN(dest - (u32)buf, maxpacket);
-        u32 count = bytes;
-        u32 max = 0x1000 - (dest & 0xfff);
-        if (count > max)
-            count = max;
-        *pos = dest;
-        bytes -= count;
-        dest += count;
-        pos++;
-    }
-    return dest - (u32)buf;
+    u32 *pos = td->buf, end = dest + transfer;
+    for (; dest < end; dest = ALIGN_DOWN(dest + PAGE_SIZE, PAGE_SIZE))
+        *pos++ = dest;
 }
 
 int
@@ -581,8 +568,7 @@ ehci_send_control(struct usb_pipe *p, int dir, const void *cmd, int cmdsize
     td->alt_next = EHCI_PTR_TERM;
     td->token = (ehci_explen(cmdsize) | QTD_STS_ACTIVE
                  | QTD_PID_SETUP | ehci_maxerr(3));
-    u16 maxpacket = pipe->pipe.maxpacket;
-    fillTDbuffer(td, maxpacket, cmd, cmdsize);
+    ehci_fill_tdbuf(td, (u32)cmd, cmdsize);
     td++;
 
     if (datasize) {
@@ -590,7 +576,7 @@ ehci_send_control(struct usb_pipe *p, int dir, const void *cmd, int cmdsize
         td->alt_next = EHCI_PTR_TERM;
         td->token = (QTD_TOGGLE | ehci_explen(datasize) | QTD_STS_ACTIVE
                      | (dir ? QTD_PID_IN : QTD_PID_OUT) | ehci_maxerr(3));
-        fillTDbuffer(td, maxpacket, data, datasize);
+        ehci_fill_tdbuf(td, (u32)data, datasize);
         td++;
     }
 
@@ -626,33 +612,36 @@ ehci_send_bulk(struct usb_pipe *p, int dir, void *data, int datasize)
             , &pipe->qh, dir, data, datasize);
 
     // Allocate 4 tds on stack (with required alignment)
-    u32 end = timer_calc(usb_xfer_time(p, datasize));
     u8 tdsbuf[sizeof(struct ehci_qtd) * STACKQTDS + EHCI_QTD_ALIGN - 1];
     struct ehci_qtd *tds = (void*)ALIGN((u32)tdsbuf, EHCI_QTD_ALIGN), *td = tds;
     memset(tds, 0, sizeof(*tds) * STACKQTDS);
 
     // Setup transfer descriptors
     u16 maxpacket = GET_LOWFLAT(pipe->pipe.maxpacket);
-    while (datasize) {
+    u32 dest = (u32)data, dataend = dest + datasize;
+    while (dest < dataend) {
         if (td >= &tds[STACKQTDS]) {
             warn_noalloc();
             return -1;
         }
-        int transfer = fillTDbuffer(td, maxpacket, data, datasize);
+        int maxtransfer = 5*PAGE_SIZE - (dest & (PAGE_SIZE-1));
+        int transfer = dataend - dest;
+        if (transfer > maxtransfer)
+            transfer = ALIGN_DOWN(maxtransfer, maxpacket);
         td->qtd_next = (u32)MAKE_FLATPTR(GET_SEG(SS), td+1);
         td->alt_next = EHCI_PTR_TERM;
         td->token = (ehci_explen(transfer) | QTD_STS_ACTIVE
                      | (dir ? QTD_PID_IN : QTD_PID_OUT) | ehci_maxerr(3));
+        ehci_fill_tdbuf(td, dest, transfer);
         td++;
-
-        data += transfer;
-        datasize -= transfer;
+        dest += transfer;
     }
 
     // Transfer data
     (td-1)->qtd_next = EHCI_PTR_TERM;
     barrier();
     SET_LOWFLAT(pipe->qh.qtd_next, (u32)MAKE_FLATPTR(GET_SEG(SS), tds));
+    u32 end = timer_calc(usb_xfer_time(p, datasize));
     int i;
     for (i=0, td=tds; i<STACKQTDS; i++, td++) {
         int ret = ehci_wait_td(pipe, td, end);