From: Philippe Mathieu-Daudé Date: Sun, 25 Feb 2024 17:08:39 +0000 (+0100) Subject: hw/ide: Include 'ide-internal.h' from current path X-Git-Tag: qemu-xen-4.20.0~280^2 X-Git-Url: http://xenbits.xensource.com/gitweb?a=commitdiff_plain;h=0316482e876988f7526ebe62d579ad069f485957;p=qemu-xen.git hw/ide: Include 'ide-internal.h' from current path Rename "internal.h" as "ide-internal.h", and include it via its relative local path, instead of absolute to the project root path. Signed-off-by: Philippe Mathieu-Daudé Message-Id: <20240226080632.9596-4-philmd@linaro.org> --- diff --git a/hw/ide/ahci.c b/hw/ide/ahci.c index 54c9685495..b8123bc73d 100644 --- a/hw/ide/ahci.c +++ b/hw/ide/ahci.c @@ -34,11 +34,11 @@ #include "qemu/module.h" #include "sysemu/block-backend.h" #include "sysemu/dma.h" -#include "hw/ide/internal.h" #include "hw/ide/pci.h" #include "hw/ide/ahci-pci.h" #include "hw/ide/ahci-sysbus.h" #include "ahci_internal.h" +#include "ide-internal.h" #include "trace.h" diff --git a/hw/ide/ahci_internal.h b/hw/ide/ahci_internal.h index 4e13329bb2..7e63ea2310 100644 --- a/hw/ide/ahci_internal.h +++ b/hw/ide/ahci_internal.h @@ -25,8 +25,8 @@ #define HW_IDE_AHCI_INTERNAL_H #include "hw/ide/ahci.h" -#include "hw/ide/internal.h" #include "hw/pci/pci_device.h" +#include "ide-internal.h" #define AHCI_MEM_BAR_SIZE 0x1000 #define AHCI_MAX_PORTS 32 diff --git a/hw/ide/atapi.c b/hw/ide/atapi.c index dcc39df9a4..73ec373184 100644 --- a/hw/ide/atapi.c +++ b/hw/ide/atapi.c @@ -24,10 +24,10 @@ */ #include "qemu/osdep.h" -#include "hw/ide/internal.h" #include "hw/scsi/scsi.h" #include "sysemu/block-backend.h" #include "scsi/constants.h" +#include "ide-internal.h" #include "trace.h" #define ATAPI_SECTOR_BITS (2 + BDRV_SECTOR_BITS) diff --git a/hw/ide/cmd646.c b/hw/ide/cmd646.c index 23d213ff01..8cebd1b63d 100644 --- a/hw/ide/cmd646.c +++ b/hw/ide/cmd646.c @@ -33,7 +33,7 @@ #include "sysemu/reset.h" #include "hw/ide/pci.h" -#include "hw/ide/internal.h" +#include "ide-internal.h" #include "trace.h" /* CMD646 specific */ diff --git a/hw/ide/core.c b/hw/ide/core.c index 9c4a812902..130c4d8865 100644 --- a/hw/ide/core.c +++ b/hw/ide/core.c @@ -41,7 +41,7 @@ #include "qemu/cutils.h" #include "sysemu/replay.h" #include "sysemu/runstate.h" -#include "hw/ide/internal.h" +#include "ide-internal.h" #include "trace.h" /* These values were based on a Seagate ST3500418AS but have been modified diff --git a/hw/ide/ide-bus.c b/hw/ide/ide-bus.c index 57fe67b29c..37d003dd9a 100644 --- a/hw/ide/ide-bus.c +++ b/hw/ide/ide-bus.c @@ -21,10 +21,10 @@ #include "qapi/error.h" #include "qemu/error-report.h" #include "qemu/module.h" -#include "hw/ide/internal.h" #include "sysemu/block-backend.h" #include "sysemu/blockdev.h" #include "sysemu/runstate.h" +#include "ide-internal.h" static char *idebus_get_fw_dev_path(DeviceState *dev); static void idebus_unrealize(BusState *qdev); diff --git a/hw/ide/ide-dev.c b/hw/ide/ide-dev.c index c8e2033469..799bd4b6ec 100644 --- a/hw/ide/ide-dev.c +++ b/hw/ide/ide-dev.c @@ -23,11 +23,11 @@ #include "qemu/error-report.h" #include "qemu/module.h" #include "hw/ide/ide-dev.h" -#include "hw/ide/internal.h" #include "sysemu/block-backend.h" #include "sysemu/blockdev.h" #include "sysemu/sysemu.h" #include "qapi/visitor.h" +#include "ide-internal.h" static Property ide_props[] = { DEFINE_PROP_UINT32("unit", IDEDevice, unit, -1), diff --git a/hw/ide/ide-internal.h b/hw/ide/ide-internal.h new file mode 100644 index 0000000000..20dde37f45 --- /dev/null +++ b/hw/ide/ide-internal.h @@ -0,0 +1,452 @@ +#ifndef HW_IDE_INTERNAL_H +#define HW_IDE_INTERNAL_H + +/* + * QEMU IDE Emulation -- internal header file + * only files in hw/ide/ are supposed to include this file. + * non-internal declarations are in hw/include/ide-*.h + */ + +#include "hw/ide/ide-bus.h" + +/* debug IDE devices */ +#define USE_DMA_CDROM + +/* Device/Head ("select") Register */ +#define ATA_DEV_SELECT 0x10 +/* ATA1,3: Defined as '1'. + * ATA2: Reserved. + * ATA3-7: obsolete. */ +#define ATA_DEV_ALWAYS_ON 0xA0 +#define ATA_DEV_LBA 0x40 +#define ATA_DEV_LBA_MSB 0x0F /* LBA 24:27 */ +#define ATA_DEV_HS 0x0F /* HS 3:0 */ + + +/* Bits of HD_STATUS */ +#define ERR_STAT 0x01 +#define INDEX_STAT 0x02 +#define ECC_STAT 0x04 /* Corrected error */ +#define DRQ_STAT 0x08 +#define SEEK_STAT 0x10 +#define SRV_STAT 0x10 +#define WRERR_STAT 0x20 +#define READY_STAT 0x40 +#define BUSY_STAT 0x80 + +/* Bits for HD_ERROR */ +#define MARK_ERR 0x01 /* Bad address mark */ +#define TRK0_ERR 0x02 /* couldn't find track 0 */ +#define ABRT_ERR 0x04 /* Command aborted */ +#define MCR_ERR 0x08 /* media change request */ +#define ID_ERR 0x10 /* ID field not found */ +#define MC_ERR 0x20 /* media changed */ +#define ECC_ERR 0x40 /* Uncorrectable ECC error */ +#define BBD_ERR 0x80 /* pre-EIDE meaning: block marked bad */ +#define ICRC_ERR 0x80 /* new meaning: CRC error during transfer */ + +/* Bits of HD_NSECTOR */ +#define CD 0x01 +#define IO 0x02 +#define REL 0x04 +#define TAG_MASK 0xf8 + +/* Bits of Device Control register */ +#define IDE_CTRL_HOB 0x80 +#define IDE_CTRL_RESET 0x04 +#define IDE_CTRL_DISABLE_IRQ 0x02 + +/* ACS-2 T13/2015-D Table B.2 Command codes */ +#define WIN_NOP 0x00 +/* reserved 0x01..0x02 */ +#define CFA_REQ_EXT_ERROR_CODE 0x03 /* CFA Request Extended Error Code */ +/* reserved 0x04..0x05 */ +#define WIN_DSM 0x06 +/* reserved 0x07 */ +#define WIN_DEVICE_RESET 0x08 +/* reserved 0x09..0x0a */ +/* REQUEST SENSE DATA EXT 0x0B */ +/* reserved 0x0C..0x0F */ +#define WIN_RECAL 0x10 /* obsolete since ATA4 */ +/* obsolete since ATA3, retired in ATA4 0x11..0x1F */ +#define WIN_READ 0x20 /* 28-Bit */ +#define WIN_READ_ONCE 0x21 /* 28-Bit w/o retries, obsolete since ATA5 */ +/* obsolete since ATA4 0x22..0x23 */ +#define WIN_READ_EXT 0x24 /* 48-Bit */ +#define WIN_READDMA_EXT 0x25 /* 48-Bit */ +#define WIN_READDMA_QUEUED_EXT 0x26 /* 48-Bit, obsolete since ACS2 */ +#define WIN_READ_NATIVE_MAX_EXT 0x27 /* 48-Bit */ +/* reserved 0x28 */ +#define WIN_MULTREAD_EXT 0x29 /* 48-Bit */ +/* READ STREAM DMA EXT 0x2A */ +/* READ STREAM EXT 0x2B */ +/* reserved 0x2C..0x2E */ +/* READ LOG EXT 0x2F */ +#define WIN_WRITE 0x30 /* 28-Bit */ +#define WIN_WRITE_ONCE 0x31 /* 28-Bit w/o retries, obsolete since ATA5 */ +/* obsolete since ATA4 0x32..0x33 */ +#define WIN_WRITE_EXT 0x34 /* 48-Bit */ +#define WIN_WRITEDMA_EXT 0x35 /* 48-Bit */ +#define WIN_WRITEDMA_QUEUED_EXT 0x36 /* 48-Bit */ +#define WIN_SET_MAX_EXT 0x37 /* 48-Bit, obsolete since ACS2 */ +#define WIN_SET_MAX_EXT 0x37 /* 48-Bit */ +#define CFA_WRITE_SECT_WO_ERASE 0x38 /* CFA Write Sectors without erase */ +#define WIN_MULTWRITE_EXT 0x39 /* 48-Bit */ +/* WRITE STREAM DMA EXT 0x3A */ +/* WRITE STREAM EXT 0x3B */ +#define WIN_WRITE_VERIFY 0x3C /* 28-Bit, obsolete since ATA4 */ +/* WRITE DMA FUA EXT 0x3D */ +/* obsolete since ACS2 0x3E */ +/* WRITE LOG EXT 0x3F */ +#define WIN_VERIFY 0x40 /* 28-Bit - Read Verify Sectors */ +#define WIN_VERIFY_ONCE 0x41 /* 28-Bit - w/o retries, obsolete since ATA5 */ +#define WIN_VERIFY_EXT 0x42 /* 48-Bit */ +/* reserved 0x43..0x44 */ +/* WRITE UNCORRECTABLE EXT 0x45 */ +/* reserved 0x46 */ +/* READ LOG DMA EXT 0x47 */ +/* reserved 0x48..0x4F */ +/* obsolete since ATA4 0x50 */ +/* CONFIGURE STREAM 0x51 */ +/* reserved 0x52..0x56 */ +/* WRITE LOG DMA EXT 0x57 */ +/* reserved 0x58..0x5A */ +/* TRUSTED NON DATA 0x5B */ +/* TRUSTED RECEIVE 0x5C */ +/* TRUSTED RECEIVE DMA 0x5D */ +/* TRUSTED SEND 0x5E */ +/* TRUSTED SEND DMA 0x5F */ +/* READ FPDMA QUEUED 0x60 */ +/* WRITE FPDMA QUEUED 0x61 */ +/* reserved 0x62->0x6F */ +#define WIN_SEEK 0x70 /* obsolete since ATA7 */ +/* reserved 0x71-0x7F */ +/* vendor specific 0x80-0x86 */ +#define CFA_TRANSLATE_SECTOR 0x87 /* CFA Translate Sector */ +/* vendor specific 0x88-0x8F */ +#define WIN_DIAGNOSE 0x90 +#define WIN_SPECIFY 0x91 /* set drive geometry translation, obsolete since ATA6 */ +#define WIN_DOWNLOAD_MICROCODE 0x92 +/* DOWNLOAD MICROCODE DMA 0x93 */ +#define WIN_STANDBYNOW2 0x94 /* retired in ATA4 */ +#define WIN_IDLEIMMEDIATE2 0x95 /* force drive to become "ready", retired in ATA4 */ +#define WIN_STANDBY2 0x96 /* retired in ATA4 */ +#define WIN_SETIDLE2 0x97 /* retired in ATA4 */ +#define WIN_CHECKPOWERMODE2 0x98 /* retired in ATA4 */ +#define WIN_SLEEPNOW2 0x99 /* retired in ATA4 */ +/* vendor specific 0x9A */ +/* reserved 0x9B..0x9F */ +#define WIN_PACKETCMD 0xA0 /* Send a packet command. */ +#define WIN_PIDENTIFY 0xA1 /* identify ATAPI device */ +#define WIN_QUEUED_SERVICE 0xA2 /* obsolete since ACS2 */ +/* reserved 0xA3..0xAF */ +#define WIN_SMART 0xB0 /* self-monitoring and reporting */ +/* Device Configuration Overlay 0xB1 */ +/* reserved 0xB2..0xB3 */ +/* Sanitize Device 0xB4 */ +/* reserved 0xB5 */ +/* NV Cache 0xB6 */ +/* reserved for CFA 0xB7..0xBB */ +#define CFA_ACCESS_METADATA_STORAGE 0xB8 +/* reserved 0xBC..0xBF */ +#define CFA_ERASE_SECTORS 0xC0 /* microdrives implement as NOP */ +/* vendor specific 0xC1..0xC3 */ +#define WIN_MULTREAD 0xC4 /* read sectors using multiple mode*/ +#define WIN_MULTWRITE 0xC5 /* write sectors using multiple mode */ +#define WIN_SETMULT 0xC6 /* enable/disable multiple mode */ +#define WIN_READDMA_QUEUED 0xC7 /* read sectors using Queued DMA transfers, obsolete since ACS2 */ +#define WIN_READDMA 0xC8 /* read sectors using DMA transfers */ +#define WIN_READDMA_ONCE 0xC9 /* 28-Bit - w/o retries, obsolete since ATA5 */ +#define WIN_WRITEDMA 0xCA /* write sectors using DMA transfers */ +#define WIN_WRITEDMA_ONCE 0xCB /* 28-Bit - w/o retries, obsolete since ATA5 */ +#define WIN_WRITEDMA_QUEUED 0xCC /* write sectors using Queued DMA transfers, obsolete since ACS2 */ +#define CFA_WRITE_MULTI_WO_ERASE 0xCD /* CFA Write multiple without erase */ +/* WRITE MULTIPLE FUA EXT 0xCE */ +/* reserved 0xCF..0xDO */ +/* CHECK MEDIA CARD TYPE 0xD1 */ +/* reserved for media card pass through 0xD2..0xD4 */ +/* reserved 0xD5..0xD9 */ +#define WIN_GETMEDIASTATUS 0xDA /* obsolete since ATA8 */ +/* obsolete since ATA3, retired in ATA4 0xDB..0xDD */ +#define WIN_DOORLOCK 0xDE /* lock door on removable drives, obsolete since ATA8 */ +#define WIN_DOORUNLOCK 0xDF /* unlock door on removable drives, obsolete since ATA8 */ +#define WIN_STANDBYNOW1 0xE0 +#define WIN_IDLEIMMEDIATE 0xE1 /* force drive to become "ready" */ +#define WIN_STANDBY 0xE2 /* Set device in Standby Mode */ +#define WIN_SETIDLE1 0xE3 +#define WIN_READ_BUFFER 0xE4 /* force read only 1 sector */ +#define WIN_CHECKPOWERMODE1 0xE5 +#define WIN_SLEEPNOW1 0xE6 +#define WIN_FLUSH_CACHE 0xE7 +#define WIN_WRITE_BUFFER 0xE8 /* force write only 1 sector */ +/* READ BUFFER DMA 0xE9 */ +#define WIN_FLUSH_CACHE_EXT 0xEA /* 48-Bit */ +/* WRITE BUFFER DMA 0xEB */ +#define WIN_IDENTIFY 0xEC /* ask drive to identify itself */ +#define WIN_MEDIAEJECT 0xED /* obsolete since ATA8 */ +/* obsolete since ATA4 0xEE */ +#define WIN_SETFEATURES 0xEF /* set special drive features */ +#define IBM_SENSE_CONDITION 0xF0 /* measure disk temperature, vendor specific */ +#define WIN_SECURITY_SET_PASS 0xF1 +#define WIN_SECURITY_UNLOCK 0xF2 +#define WIN_SECURITY_ERASE_PREPARE 0xF3 +#define WIN_SECURITY_ERASE_UNIT 0xF4 +#define WIN_SECURITY_FREEZE_LOCK 0xF5 +#define CFA_WEAR_LEVEL 0xF5 /* microdrives implement as NOP; not specified in T13! */ +#define WIN_SECURITY_DISABLE 0xF6 +/* vendor specific 0xF7 */ +#define WIN_READ_NATIVE_MAX 0xF8 /* return the native maximum address */ +#define WIN_SET_MAX 0xF9 +/* vendor specific 0xFA..0xFF */ + +/* set to 1 set disable mult support */ +#define MAX_MULT_SECTORS 16 + +#define IDE_DMA_BUF_SECTORS 256 + +/* feature values for Data Set Management */ +#define DSM_TRIM 0x01 + +#if (IDE_DMA_BUF_SECTORS < MAX_MULT_SECTORS) +#error "IDE_DMA_BUF_SECTORS must be bigger or equal to MAX_MULT_SECTORS" +#endif + +/* ATAPI defines */ + +#define ATAPI_PACKET_SIZE 12 + +/* The generic packet command opcodes for CD/DVD Logical Units, + * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */ +#define GPCMD_BLANK 0xa1 +#define GPCMD_CLOSE_TRACK 0x5b +#define GPCMD_FLUSH_CACHE 0x35 +#define GPCMD_FORMAT_UNIT 0x04 +#define GPCMD_GET_CONFIGURATION 0x46 +#define GPCMD_GET_EVENT_STATUS_NOTIFICATION 0x4a +#define GPCMD_GET_PERFORMANCE 0xac +#define GPCMD_INQUIRY 0x12 +#define GPCMD_LOAD_UNLOAD 0xa6 +#define GPCMD_MECHANISM_STATUS 0xbd +#define GPCMD_MODE_SELECT_10 0x55 +#define GPCMD_MODE_SENSE_10 0x5a +#define GPCMD_PAUSE_RESUME 0x4b +#define GPCMD_PLAY_AUDIO_10 0x45 +#define GPCMD_PLAY_AUDIO_MSF 0x47 +#define GPCMD_PLAY_AUDIO_TI 0x48 +#define GPCMD_PLAY_CD 0xbc +#define GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1e +#define GPCMD_READ_10 0x28 +#define GPCMD_READ_12 0xa8 +#define GPCMD_READ_CDVD_CAPACITY 0x25 +#define GPCMD_READ_CD 0xbe +#define GPCMD_READ_CD_MSF 0xb9 +#define GPCMD_READ_DISC_INFO 0x51 +#define GPCMD_READ_DVD_STRUCTURE 0xad +#define GPCMD_READ_FORMAT_CAPACITIES 0x23 +#define GPCMD_READ_HEADER 0x44 +#define GPCMD_READ_TRACK_RZONE_INFO 0x52 +#define GPCMD_READ_SUBCHANNEL 0x42 +#define GPCMD_READ_TOC_PMA_ATIP 0x43 +#define GPCMD_REPAIR_RZONE_TRACK 0x58 +#define GPCMD_REPORT_KEY 0xa4 +#define GPCMD_REQUEST_SENSE 0x03 +#define GPCMD_RESERVE_RZONE_TRACK 0x53 +#define GPCMD_SCAN 0xba +#define GPCMD_SEEK 0x2b +#define GPCMD_SEND_DVD_STRUCTURE 0xad +#define GPCMD_SEND_EVENT 0xa2 +#define GPCMD_SEND_KEY 0xa3 +#define GPCMD_SEND_OPC 0x54 +#define GPCMD_SET_READ_AHEAD 0xa7 +#define GPCMD_SET_STREAMING 0xb6 +#define GPCMD_START_STOP_UNIT 0x1b +#define GPCMD_STOP_PLAY_SCAN 0x4e +#define GPCMD_TEST_UNIT_READY 0x00 +#define GPCMD_VERIFY_10 0x2f +#define GPCMD_WRITE_10 0x2a +#define GPCMD_WRITE_AND_VERIFY_10 0x2e +/* This is listed as optional in ATAPI 2.6, but is (curiously) + * missing from Mt. Fuji, Table 57. It _is_ mentioned in Mt. Fuji + * Table 377 as an MMC command for SCSi devices though... Most ATAPI + * drives support it. */ +#define GPCMD_SET_SPEED 0xbb +/* This seems to be a SCSI specific CD-ROM opcode + * to play data at track/index */ +#define GPCMD_PLAYAUDIO_TI 0x48 +/* + * From MS Media Status Notification Support Specification. For + * older drives only. + */ +#define GPCMD_GET_MEDIA_STATUS 0xda +#define GPCMD_MODE_SENSE_6 0x1a + +#define ATAPI_INT_REASON_CD 0x01 /* 0 = data transfer */ +#define ATAPI_INT_REASON_IO 0x02 /* 1 = transfer to the host */ +#define ATAPI_INT_REASON_REL 0x04 +#define ATAPI_INT_REASON_TAG 0xf8 + +/* same constants as bochs */ +#define ASC_NO_SEEK_COMPLETE 0x02 +#define ASC_ILLEGAL_OPCODE 0x20 +#define ASC_LOGICAL_BLOCK_OOR 0x21 +#define ASC_INV_FIELD_IN_CMD_PACKET 0x24 +#define ASC_MEDIUM_MAY_HAVE_CHANGED 0x28 +#define ASC_INCOMPATIBLE_FORMAT 0x30 +#define ASC_MEDIUM_NOT_PRESENT 0x3a +#define ASC_SAVING_PARAMETERS_NOT_SUPPORTED 0x39 +#define ASC_DATA_PHASE_ERROR 0x4b +#define ASC_MEDIA_REMOVAL_PREVENTED 0x53 + +#define CFA_NO_ERROR 0x00 +#define CFA_MISC_ERROR 0x09 +#define CFA_INVALID_COMMAND 0x20 +#define CFA_INVALID_ADDRESS 0x21 +#define CFA_ADDRESS_OVERFLOW 0x2f + +#define SMART_READ_DATA 0xd0 +#define SMART_READ_THRESH 0xd1 +#define SMART_ATTR_AUTOSAVE 0xd2 +#define SMART_SAVE_ATTR 0xd3 +#define SMART_EXECUTE_OFFLINE 0xd4 +#define SMART_READ_LOG 0xd5 +#define SMART_WRITE_LOG 0xd6 +#define SMART_ENABLE 0xd8 +#define SMART_DISABLE 0xd9 +#define SMART_STATUS 0xda + +extern const char *IDE_DMA_CMD_lookup[IDE_DMA__COUNT]; + +extern const MemoryRegionPortio ide_portio_list[]; +extern const MemoryRegionPortio ide_portio2_list[]; + +#define ide_cmd_is_read(s) \ + ((s)->dma_cmd == IDE_DMA_READ) + +typedef struct IDEBufferedRequest { + QLIST_ENTRY(IDEBufferedRequest) list; + QEMUIOVector qiov; + QEMUIOVector *original_qiov; + BlockCompletionFunc *original_cb; + void *original_opaque; + bool orphaned; +} IDEBufferedRequest; + +/* These are used for the error_status field of IDEBus */ +#define IDE_RETRY_MASK 0xf8 +#define IDE_RETRY_DMA 0x08 +#define IDE_RETRY_PIO 0x10 +#define IDE_RETRY_ATAPI 0x20 /* reused IDE_RETRY_READ bit */ +#define IDE_RETRY_READ 0x20 +#define IDE_RETRY_FLUSH 0x40 +#define IDE_RETRY_TRIM 0x80 +#define IDE_RETRY_HBA 0x100 + +#define IS_IDE_RETRY_DMA(_status) \ + ((_status) & IDE_RETRY_DMA) + +#define IS_IDE_RETRY_PIO(_status) \ + ((_status) & IDE_RETRY_PIO) + +/* + * The method of the IDE_RETRY_ATAPI determination is to use a previously + * impossible bit combination as a new status value. + */ +#define IS_IDE_RETRY_ATAPI(_status) \ + (((_status) & IDE_RETRY_MASK) == IDE_RETRY_ATAPI) + +static inline uint8_t ide_dma_cmd_to_retry(uint8_t dma_cmd) +{ + switch (dma_cmd) { + case IDE_DMA_READ: + return IDE_RETRY_DMA | IDE_RETRY_READ; + case IDE_DMA_WRITE: + return IDE_RETRY_DMA; + case IDE_DMA_TRIM: + return IDE_RETRY_DMA | IDE_RETRY_TRIM; + case IDE_DMA_ATAPI: + return IDE_RETRY_ATAPI; + default: + break; + } + return 0; +} + +static inline IDEState *ide_bus_active_if(IDEBus *bus) +{ + return bus->ifs + bus->unit; +} + +/* hw/ide/core.c */ +extern const VMStateDescription vmstate_ide_bus; + +#define VMSTATE_IDE_BUS(_field, _state) \ + VMSTATE_STRUCT(_field, _state, 1, vmstate_ide_bus, IDEBus) + +#define VMSTATE_IDE_BUS_ARRAY(_field, _state, _num) \ + VMSTATE_STRUCT_ARRAY(_field, _state, _num, 1, vmstate_ide_bus, IDEBus) + +extern const VMStateDescription vmstate_ide_drive; + +#define VMSTATE_IDE_DRIVES(_field, _state) \ + VMSTATE_STRUCT_ARRAY(_field, _state, 2, 3, vmstate_ide_drive, IDEState) + +#define VMSTATE_IDE_DRIVE(_field, _state) \ + VMSTATE_STRUCT(_field, _state, 1, vmstate_ide_drive, IDEState) + +void ide_bus_reset(IDEBus *bus); +int64_t ide_get_sector(IDEState *s); +void ide_set_sector(IDEState *s, int64_t sector_num); + +void ide_start_dma(IDEState *s, BlockCompletionFunc *cb); +void dma_buf_commit(IDEState *s, uint32_t tx_bytes); +void ide_dma_error(IDEState *s); +void ide_abort_command(IDEState *s); + +void ide_atapi_cmd_ok(IDEState *s); +void ide_atapi_cmd_error(IDEState *s, int sense_key, int asc); +void ide_atapi_dma_restart(IDEState *s); +void ide_atapi_io_error(IDEState *s, int ret); + +void ide_ioport_write(void *opaque, uint32_t addr, uint32_t val); +uint32_t ide_ioport_read(void *opaque, uint32_t addr1); +uint32_t ide_status_read(void *opaque, uint32_t addr); +void ide_ctrl_write(void *opaque, uint32_t addr, uint32_t val); +void ide_data_writew(void *opaque, uint32_t addr, uint32_t val); +uint32_t ide_data_readw(void *opaque, uint32_t addr); +void ide_data_writel(void *opaque, uint32_t addr, uint32_t val); +uint32_t ide_data_readl(void *opaque, uint32_t addr); + +int ide_init_drive(IDEState *s, BlockBackend *blk, IDEDriveKind kind, + const char *version, const char *serial, const char *model, + uint64_t wwn, + uint32_t cylinders, uint32_t heads, uint32_t secs, + int chs_trans, Error **errp); +void ide_exit(IDEState *s); +void ide_bus_init_output_irq(IDEBus *bus, qemu_irq irq_out); +int ide_init_ioport(IDEBus *bus, ISADevice *isa, int iobase, int iobase2); +void ide_bus_set_irq(IDEBus *bus); +void ide_bus_register_restart_cb(IDEBus *bus); + +void ide_bus_exec_cmd(IDEBus *bus, uint32_t val); + +void ide_transfer_start(IDEState *s, uint8_t *buf, int size, + EndTransferFunc *end_transfer_func); +bool ide_transfer_start_norecurse(IDEState *s, uint8_t *buf, int size, + EndTransferFunc *end_transfer_func); +void ide_transfer_stop(IDEState *s); +void ide_set_inactive(IDEState *s, bool more); +BlockAIOCB *ide_issue_trim( + int64_t offset, QEMUIOVector *qiov, + BlockCompletionFunc *cb, void *cb_opaque, void *opaque); +BlockAIOCB *ide_buffered_readv(IDEState *s, int64_t sector_num, + QEMUIOVector *iov, int nb_sectors, + BlockCompletionFunc *cb, void *opaque); +void ide_cancel_dma_sync(IDEState *s); + +/* hw/ide/atapi.c */ +void ide_atapi_cmd(IDEState *s); +void ide_atapi_cmd_reply_end(IDEState *s); + +int ide_handle_rw_error(IDEState *s, int error, int op); + +#endif /* HW_IDE_INTERNAL_H */ diff --git a/hw/ide/internal.h b/hw/ide/internal.h deleted file mode 100644 index 20dde37f45..0000000000 --- a/hw/ide/internal.h +++ /dev/null @@ -1,452 +0,0 @@ -#ifndef HW_IDE_INTERNAL_H -#define HW_IDE_INTERNAL_H - -/* - * QEMU IDE Emulation -- internal header file - * only files in hw/ide/ are supposed to include this file. - * non-internal declarations are in hw/include/ide-*.h - */ - -#include "hw/ide/ide-bus.h" - -/* debug IDE devices */ -#define USE_DMA_CDROM - -/* Device/Head ("select") Register */ -#define ATA_DEV_SELECT 0x10 -/* ATA1,3: Defined as '1'. - * ATA2: Reserved. - * ATA3-7: obsolete. */ -#define ATA_DEV_ALWAYS_ON 0xA0 -#define ATA_DEV_LBA 0x40 -#define ATA_DEV_LBA_MSB 0x0F /* LBA 24:27 */ -#define ATA_DEV_HS 0x0F /* HS 3:0 */ - - -/* Bits of HD_STATUS */ -#define ERR_STAT 0x01 -#define INDEX_STAT 0x02 -#define ECC_STAT 0x04 /* Corrected error */ -#define DRQ_STAT 0x08 -#define SEEK_STAT 0x10 -#define SRV_STAT 0x10 -#define WRERR_STAT 0x20 -#define READY_STAT 0x40 -#define BUSY_STAT 0x80 - -/* Bits for HD_ERROR */ -#define MARK_ERR 0x01 /* Bad address mark */ -#define TRK0_ERR 0x02 /* couldn't find track 0 */ -#define ABRT_ERR 0x04 /* Command aborted */ -#define MCR_ERR 0x08 /* media change request */ -#define ID_ERR 0x10 /* ID field not found */ -#define MC_ERR 0x20 /* media changed */ -#define ECC_ERR 0x40 /* Uncorrectable ECC error */ -#define BBD_ERR 0x80 /* pre-EIDE meaning: block marked bad */ -#define ICRC_ERR 0x80 /* new meaning: CRC error during transfer */ - -/* Bits of HD_NSECTOR */ -#define CD 0x01 -#define IO 0x02 -#define REL 0x04 -#define TAG_MASK 0xf8 - -/* Bits of Device Control register */ -#define IDE_CTRL_HOB 0x80 -#define IDE_CTRL_RESET 0x04 -#define IDE_CTRL_DISABLE_IRQ 0x02 - -/* ACS-2 T13/2015-D Table B.2 Command codes */ -#define WIN_NOP 0x00 -/* reserved 0x01..0x02 */ -#define CFA_REQ_EXT_ERROR_CODE 0x03 /* CFA Request Extended Error Code */ -/* reserved 0x04..0x05 */ -#define WIN_DSM 0x06 -/* reserved 0x07 */ -#define WIN_DEVICE_RESET 0x08 -/* reserved 0x09..0x0a */ -/* REQUEST SENSE DATA EXT 0x0B */ -/* reserved 0x0C..0x0F */ -#define WIN_RECAL 0x10 /* obsolete since ATA4 */ -/* obsolete since ATA3, retired in ATA4 0x11..0x1F */ -#define WIN_READ 0x20 /* 28-Bit */ -#define WIN_READ_ONCE 0x21 /* 28-Bit w/o retries, obsolete since ATA5 */ -/* obsolete since ATA4 0x22..0x23 */ -#define WIN_READ_EXT 0x24 /* 48-Bit */ -#define WIN_READDMA_EXT 0x25 /* 48-Bit */ -#define WIN_READDMA_QUEUED_EXT 0x26 /* 48-Bit, obsolete since ACS2 */ -#define WIN_READ_NATIVE_MAX_EXT 0x27 /* 48-Bit */ -/* reserved 0x28 */ -#define WIN_MULTREAD_EXT 0x29 /* 48-Bit */ -/* READ STREAM DMA EXT 0x2A */ -/* READ STREAM EXT 0x2B */ -/* reserved 0x2C..0x2E */ -/* READ LOG EXT 0x2F */ -#define WIN_WRITE 0x30 /* 28-Bit */ -#define WIN_WRITE_ONCE 0x31 /* 28-Bit w/o retries, obsolete since ATA5 */ -/* obsolete since ATA4 0x32..0x33 */ -#define WIN_WRITE_EXT 0x34 /* 48-Bit */ -#define WIN_WRITEDMA_EXT 0x35 /* 48-Bit */ -#define WIN_WRITEDMA_QUEUED_EXT 0x36 /* 48-Bit */ -#define WIN_SET_MAX_EXT 0x37 /* 48-Bit, obsolete since ACS2 */ -#define WIN_SET_MAX_EXT 0x37 /* 48-Bit */ -#define CFA_WRITE_SECT_WO_ERASE 0x38 /* CFA Write Sectors without erase */ -#define WIN_MULTWRITE_EXT 0x39 /* 48-Bit */ -/* WRITE STREAM DMA EXT 0x3A */ -/* WRITE STREAM EXT 0x3B */ -#define WIN_WRITE_VERIFY 0x3C /* 28-Bit, obsolete since ATA4 */ -/* WRITE DMA FUA EXT 0x3D */ -/* obsolete since ACS2 0x3E */ -/* WRITE LOG EXT 0x3F */ -#define WIN_VERIFY 0x40 /* 28-Bit - Read Verify Sectors */ -#define WIN_VERIFY_ONCE 0x41 /* 28-Bit - w/o retries, obsolete since ATA5 */ -#define WIN_VERIFY_EXT 0x42 /* 48-Bit */ -/* reserved 0x43..0x44 */ -/* WRITE UNCORRECTABLE EXT 0x45 */ -/* reserved 0x46 */ -/* READ LOG DMA EXT 0x47 */ -/* reserved 0x48..0x4F */ -/* obsolete since ATA4 0x50 */ -/* CONFIGURE STREAM 0x51 */ -/* reserved 0x52..0x56 */ -/* WRITE LOG DMA EXT 0x57 */ -/* reserved 0x58..0x5A */ -/* TRUSTED NON DATA 0x5B */ -/* TRUSTED RECEIVE 0x5C */ -/* TRUSTED RECEIVE DMA 0x5D */ -/* TRUSTED SEND 0x5E */ -/* TRUSTED SEND DMA 0x5F */ -/* READ FPDMA QUEUED 0x60 */ -/* WRITE FPDMA QUEUED 0x61 */ -/* reserved 0x62->0x6F */ -#define WIN_SEEK 0x70 /* obsolete since ATA7 */ -/* reserved 0x71-0x7F */ -/* vendor specific 0x80-0x86 */ -#define CFA_TRANSLATE_SECTOR 0x87 /* CFA Translate Sector */ -/* vendor specific 0x88-0x8F */ -#define WIN_DIAGNOSE 0x90 -#define WIN_SPECIFY 0x91 /* set drive geometry translation, obsolete since ATA6 */ -#define WIN_DOWNLOAD_MICROCODE 0x92 -/* DOWNLOAD MICROCODE DMA 0x93 */ -#define WIN_STANDBYNOW2 0x94 /* retired in ATA4 */ -#define WIN_IDLEIMMEDIATE2 0x95 /* force drive to become "ready", retired in ATA4 */ -#define WIN_STANDBY2 0x96 /* retired in ATA4 */ -#define WIN_SETIDLE2 0x97 /* retired in ATA4 */ -#define WIN_CHECKPOWERMODE2 0x98 /* retired in ATA4 */ -#define WIN_SLEEPNOW2 0x99 /* retired in ATA4 */ -/* vendor specific 0x9A */ -/* reserved 0x9B..0x9F */ -#define WIN_PACKETCMD 0xA0 /* Send a packet command. */ -#define WIN_PIDENTIFY 0xA1 /* identify ATAPI device */ -#define WIN_QUEUED_SERVICE 0xA2 /* obsolete since ACS2 */ -/* reserved 0xA3..0xAF */ -#define WIN_SMART 0xB0 /* self-monitoring and reporting */ -/* Device Configuration Overlay 0xB1 */ -/* reserved 0xB2..0xB3 */ -/* Sanitize Device 0xB4 */ -/* reserved 0xB5 */ -/* NV Cache 0xB6 */ -/* reserved for CFA 0xB7..0xBB */ -#define CFA_ACCESS_METADATA_STORAGE 0xB8 -/* reserved 0xBC..0xBF */ -#define CFA_ERASE_SECTORS 0xC0 /* microdrives implement as NOP */ -/* vendor specific 0xC1..0xC3 */ -#define WIN_MULTREAD 0xC4 /* read sectors using multiple mode*/ -#define WIN_MULTWRITE 0xC5 /* write sectors using multiple mode */ -#define WIN_SETMULT 0xC6 /* enable/disable multiple mode */ -#define WIN_READDMA_QUEUED 0xC7 /* read sectors using Queued DMA transfers, obsolete since ACS2 */ -#define WIN_READDMA 0xC8 /* read sectors using DMA transfers */ -#define WIN_READDMA_ONCE 0xC9 /* 28-Bit - w/o retries, obsolete since ATA5 */ -#define WIN_WRITEDMA 0xCA /* write sectors using DMA transfers */ -#define WIN_WRITEDMA_ONCE 0xCB /* 28-Bit - w/o retries, obsolete since ATA5 */ -#define WIN_WRITEDMA_QUEUED 0xCC /* write sectors using Queued DMA transfers, obsolete since ACS2 */ -#define CFA_WRITE_MULTI_WO_ERASE 0xCD /* CFA Write multiple without erase */ -/* WRITE MULTIPLE FUA EXT 0xCE */ -/* reserved 0xCF..0xDO */ -/* CHECK MEDIA CARD TYPE 0xD1 */ -/* reserved for media card pass through 0xD2..0xD4 */ -/* reserved 0xD5..0xD9 */ -#define WIN_GETMEDIASTATUS 0xDA /* obsolete since ATA8 */ -/* obsolete since ATA3, retired in ATA4 0xDB..0xDD */ -#define WIN_DOORLOCK 0xDE /* lock door on removable drives, obsolete since ATA8 */ -#define WIN_DOORUNLOCK 0xDF /* unlock door on removable drives, obsolete since ATA8 */ -#define WIN_STANDBYNOW1 0xE0 -#define WIN_IDLEIMMEDIATE 0xE1 /* force drive to become "ready" */ -#define WIN_STANDBY 0xE2 /* Set device in Standby Mode */ -#define WIN_SETIDLE1 0xE3 -#define WIN_READ_BUFFER 0xE4 /* force read only 1 sector */ -#define WIN_CHECKPOWERMODE1 0xE5 -#define WIN_SLEEPNOW1 0xE6 -#define WIN_FLUSH_CACHE 0xE7 -#define WIN_WRITE_BUFFER 0xE8 /* force write only 1 sector */ -/* READ BUFFER DMA 0xE9 */ -#define WIN_FLUSH_CACHE_EXT 0xEA /* 48-Bit */ -/* WRITE BUFFER DMA 0xEB */ -#define WIN_IDENTIFY 0xEC /* ask drive to identify itself */ -#define WIN_MEDIAEJECT 0xED /* obsolete since ATA8 */ -/* obsolete since ATA4 0xEE */ -#define WIN_SETFEATURES 0xEF /* set special drive features */ -#define IBM_SENSE_CONDITION 0xF0 /* measure disk temperature, vendor specific */ -#define WIN_SECURITY_SET_PASS 0xF1 -#define WIN_SECURITY_UNLOCK 0xF2 -#define WIN_SECURITY_ERASE_PREPARE 0xF3 -#define WIN_SECURITY_ERASE_UNIT 0xF4 -#define WIN_SECURITY_FREEZE_LOCK 0xF5 -#define CFA_WEAR_LEVEL 0xF5 /* microdrives implement as NOP; not specified in T13! */ -#define WIN_SECURITY_DISABLE 0xF6 -/* vendor specific 0xF7 */ -#define WIN_READ_NATIVE_MAX 0xF8 /* return the native maximum address */ -#define WIN_SET_MAX 0xF9 -/* vendor specific 0xFA..0xFF */ - -/* set to 1 set disable mult support */ -#define MAX_MULT_SECTORS 16 - -#define IDE_DMA_BUF_SECTORS 256 - -/* feature values for Data Set Management */ -#define DSM_TRIM 0x01 - -#if (IDE_DMA_BUF_SECTORS < MAX_MULT_SECTORS) -#error "IDE_DMA_BUF_SECTORS must be bigger or equal to MAX_MULT_SECTORS" -#endif - -/* ATAPI defines */ - -#define ATAPI_PACKET_SIZE 12 - -/* The generic packet command opcodes for CD/DVD Logical Units, - * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */ -#define GPCMD_BLANK 0xa1 -#define GPCMD_CLOSE_TRACK 0x5b -#define GPCMD_FLUSH_CACHE 0x35 -#define GPCMD_FORMAT_UNIT 0x04 -#define GPCMD_GET_CONFIGURATION 0x46 -#define GPCMD_GET_EVENT_STATUS_NOTIFICATION 0x4a -#define GPCMD_GET_PERFORMANCE 0xac -#define GPCMD_INQUIRY 0x12 -#define GPCMD_LOAD_UNLOAD 0xa6 -#define GPCMD_MECHANISM_STATUS 0xbd -#define GPCMD_MODE_SELECT_10 0x55 -#define GPCMD_MODE_SENSE_10 0x5a -#define GPCMD_PAUSE_RESUME 0x4b -#define GPCMD_PLAY_AUDIO_10 0x45 -#define GPCMD_PLAY_AUDIO_MSF 0x47 -#define GPCMD_PLAY_AUDIO_TI 0x48 -#define GPCMD_PLAY_CD 0xbc -#define GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1e -#define GPCMD_READ_10 0x28 -#define GPCMD_READ_12 0xa8 -#define GPCMD_READ_CDVD_CAPACITY 0x25 -#define GPCMD_READ_CD 0xbe -#define GPCMD_READ_CD_MSF 0xb9 -#define GPCMD_READ_DISC_INFO 0x51 -#define GPCMD_READ_DVD_STRUCTURE 0xad -#define GPCMD_READ_FORMAT_CAPACITIES 0x23 -#define GPCMD_READ_HEADER 0x44 -#define GPCMD_READ_TRACK_RZONE_INFO 0x52 -#define GPCMD_READ_SUBCHANNEL 0x42 -#define GPCMD_READ_TOC_PMA_ATIP 0x43 -#define GPCMD_REPAIR_RZONE_TRACK 0x58 -#define GPCMD_REPORT_KEY 0xa4 -#define GPCMD_REQUEST_SENSE 0x03 -#define GPCMD_RESERVE_RZONE_TRACK 0x53 -#define GPCMD_SCAN 0xba -#define GPCMD_SEEK 0x2b -#define GPCMD_SEND_DVD_STRUCTURE 0xad -#define GPCMD_SEND_EVENT 0xa2 -#define GPCMD_SEND_KEY 0xa3 -#define GPCMD_SEND_OPC 0x54 -#define GPCMD_SET_READ_AHEAD 0xa7 -#define GPCMD_SET_STREAMING 0xb6 -#define GPCMD_START_STOP_UNIT 0x1b -#define GPCMD_STOP_PLAY_SCAN 0x4e -#define GPCMD_TEST_UNIT_READY 0x00 -#define GPCMD_VERIFY_10 0x2f -#define GPCMD_WRITE_10 0x2a -#define GPCMD_WRITE_AND_VERIFY_10 0x2e -/* This is listed as optional in ATAPI 2.6, but is (curiously) - * missing from Mt. Fuji, Table 57. It _is_ mentioned in Mt. Fuji - * Table 377 as an MMC command for SCSi devices though... Most ATAPI - * drives support it. */ -#define GPCMD_SET_SPEED 0xbb -/* This seems to be a SCSI specific CD-ROM opcode - * to play data at track/index */ -#define GPCMD_PLAYAUDIO_TI 0x48 -/* - * From MS Media Status Notification Support Specification. For - * older drives only. - */ -#define GPCMD_GET_MEDIA_STATUS 0xda -#define GPCMD_MODE_SENSE_6 0x1a - -#define ATAPI_INT_REASON_CD 0x01 /* 0 = data transfer */ -#define ATAPI_INT_REASON_IO 0x02 /* 1 = transfer to the host */ -#define ATAPI_INT_REASON_REL 0x04 -#define ATAPI_INT_REASON_TAG 0xf8 - -/* same constants as bochs */ -#define ASC_NO_SEEK_COMPLETE 0x02 -#define ASC_ILLEGAL_OPCODE 0x20 -#define ASC_LOGICAL_BLOCK_OOR 0x21 -#define ASC_INV_FIELD_IN_CMD_PACKET 0x24 -#define ASC_MEDIUM_MAY_HAVE_CHANGED 0x28 -#define ASC_INCOMPATIBLE_FORMAT 0x30 -#define ASC_MEDIUM_NOT_PRESENT 0x3a -#define ASC_SAVING_PARAMETERS_NOT_SUPPORTED 0x39 -#define ASC_DATA_PHASE_ERROR 0x4b -#define ASC_MEDIA_REMOVAL_PREVENTED 0x53 - -#define CFA_NO_ERROR 0x00 -#define CFA_MISC_ERROR 0x09 -#define CFA_INVALID_COMMAND 0x20 -#define CFA_INVALID_ADDRESS 0x21 -#define CFA_ADDRESS_OVERFLOW 0x2f - -#define SMART_READ_DATA 0xd0 -#define SMART_READ_THRESH 0xd1 -#define SMART_ATTR_AUTOSAVE 0xd2 -#define SMART_SAVE_ATTR 0xd3 -#define SMART_EXECUTE_OFFLINE 0xd4 -#define SMART_READ_LOG 0xd5 -#define SMART_WRITE_LOG 0xd6 -#define SMART_ENABLE 0xd8 -#define SMART_DISABLE 0xd9 -#define SMART_STATUS 0xda - -extern const char *IDE_DMA_CMD_lookup[IDE_DMA__COUNT]; - -extern const MemoryRegionPortio ide_portio_list[]; -extern const MemoryRegionPortio ide_portio2_list[]; - -#define ide_cmd_is_read(s) \ - ((s)->dma_cmd == IDE_DMA_READ) - -typedef struct IDEBufferedRequest { - QLIST_ENTRY(IDEBufferedRequest) list; - QEMUIOVector qiov; - QEMUIOVector *original_qiov; - BlockCompletionFunc *original_cb; - void *original_opaque; - bool orphaned; -} IDEBufferedRequest; - -/* These are used for the error_status field of IDEBus */ -#define IDE_RETRY_MASK 0xf8 -#define IDE_RETRY_DMA 0x08 -#define IDE_RETRY_PIO 0x10 -#define IDE_RETRY_ATAPI 0x20 /* reused IDE_RETRY_READ bit */ -#define IDE_RETRY_READ 0x20 -#define IDE_RETRY_FLUSH 0x40 -#define IDE_RETRY_TRIM 0x80 -#define IDE_RETRY_HBA 0x100 - -#define IS_IDE_RETRY_DMA(_status) \ - ((_status) & IDE_RETRY_DMA) - -#define IS_IDE_RETRY_PIO(_status) \ - ((_status) & IDE_RETRY_PIO) - -/* - * The method of the IDE_RETRY_ATAPI determination is to use a previously - * impossible bit combination as a new status value. - */ -#define IS_IDE_RETRY_ATAPI(_status) \ - (((_status) & IDE_RETRY_MASK) == IDE_RETRY_ATAPI) - -static inline uint8_t ide_dma_cmd_to_retry(uint8_t dma_cmd) -{ - switch (dma_cmd) { - case IDE_DMA_READ: - return IDE_RETRY_DMA | IDE_RETRY_READ; - case IDE_DMA_WRITE: - return IDE_RETRY_DMA; - case IDE_DMA_TRIM: - return IDE_RETRY_DMA | IDE_RETRY_TRIM; - case IDE_DMA_ATAPI: - return IDE_RETRY_ATAPI; - default: - break; - } - return 0; -} - -static inline IDEState *ide_bus_active_if(IDEBus *bus) -{ - return bus->ifs + bus->unit; -} - -/* hw/ide/core.c */ -extern const VMStateDescription vmstate_ide_bus; - -#define VMSTATE_IDE_BUS(_field, _state) \ - VMSTATE_STRUCT(_field, _state, 1, vmstate_ide_bus, IDEBus) - -#define VMSTATE_IDE_BUS_ARRAY(_field, _state, _num) \ - VMSTATE_STRUCT_ARRAY(_field, _state, _num, 1, vmstate_ide_bus, IDEBus) - -extern const VMStateDescription vmstate_ide_drive; - -#define VMSTATE_IDE_DRIVES(_field, _state) \ - VMSTATE_STRUCT_ARRAY(_field, _state, 2, 3, vmstate_ide_drive, IDEState) - -#define VMSTATE_IDE_DRIVE(_field, _state) \ - VMSTATE_STRUCT(_field, _state, 1, vmstate_ide_drive, IDEState) - -void ide_bus_reset(IDEBus *bus); -int64_t ide_get_sector(IDEState *s); -void ide_set_sector(IDEState *s, int64_t sector_num); - -void ide_start_dma(IDEState *s, BlockCompletionFunc *cb); -void dma_buf_commit(IDEState *s, uint32_t tx_bytes); -void ide_dma_error(IDEState *s); -void ide_abort_command(IDEState *s); - -void ide_atapi_cmd_ok(IDEState *s); -void ide_atapi_cmd_error(IDEState *s, int sense_key, int asc); -void ide_atapi_dma_restart(IDEState *s); -void ide_atapi_io_error(IDEState *s, int ret); - -void ide_ioport_write(void *opaque, uint32_t addr, uint32_t val); -uint32_t ide_ioport_read(void *opaque, uint32_t addr1); -uint32_t ide_status_read(void *opaque, uint32_t addr); -void ide_ctrl_write(void *opaque, uint32_t addr, uint32_t val); -void ide_data_writew(void *opaque, uint32_t addr, uint32_t val); -uint32_t ide_data_readw(void *opaque, uint32_t addr); -void ide_data_writel(void *opaque, uint32_t addr, uint32_t val); -uint32_t ide_data_readl(void *opaque, uint32_t addr); - -int ide_init_drive(IDEState *s, BlockBackend *blk, IDEDriveKind kind, - const char *version, const char *serial, const char *model, - uint64_t wwn, - uint32_t cylinders, uint32_t heads, uint32_t secs, - int chs_trans, Error **errp); -void ide_exit(IDEState *s); -void ide_bus_init_output_irq(IDEBus *bus, qemu_irq irq_out); -int ide_init_ioport(IDEBus *bus, ISADevice *isa, int iobase, int iobase2); -void ide_bus_set_irq(IDEBus *bus); -void ide_bus_register_restart_cb(IDEBus *bus); - -void ide_bus_exec_cmd(IDEBus *bus, uint32_t val); - -void ide_transfer_start(IDEState *s, uint8_t *buf, int size, - EndTransferFunc *end_transfer_func); -bool ide_transfer_start_norecurse(IDEState *s, uint8_t *buf, int size, - EndTransferFunc *end_transfer_func); -void ide_transfer_stop(IDEState *s); -void ide_set_inactive(IDEState *s, bool more); -BlockAIOCB *ide_issue_trim( - int64_t offset, QEMUIOVector *qiov, - BlockCompletionFunc *cb, void *cb_opaque, void *opaque); -BlockAIOCB *ide_buffered_readv(IDEState *s, int64_t sector_num, - QEMUIOVector *iov, int nb_sectors, - BlockCompletionFunc *cb, void *opaque); -void ide_cancel_dma_sync(IDEState *s); - -/* hw/ide/atapi.c */ -void ide_atapi_cmd(IDEState *s); -void ide_atapi_cmd_reply_end(IDEState *s); - -int ide_handle_rw_error(IDEState *s, int error, int op); - -#endif /* HW_IDE_INTERNAL_H */ diff --git a/hw/ide/ioport.c b/hw/ide/ioport.c index 0b283ac783..a2f457f0bd 100644 --- a/hw/ide/ioport.c +++ b/hw/ide/ioport.c @@ -25,7 +25,7 @@ #include "qemu/osdep.h" #include "hw/isa/isa.h" -#include "hw/ide/internal.h" +#include "ide-internal.h" #include "trace.h" int ide_init_ioport(IDEBus *bus, ISADevice *dev, int iobase, int iobase2) diff --git a/hw/ide/isa.c b/hw/ide/isa.c index cc865c83dc..934c45887c 100644 --- a/hw/ide/isa.c +++ b/hw/ide/isa.c @@ -32,8 +32,8 @@ #include "sysemu/dma.h" #include "hw/ide/isa.h" -#include "hw/ide/internal.h" #include "qom/object.h" +#include "ide-internal.h" /***********************************************************/ /* ISA IDE definitions */ diff --git a/hw/ide/macio.c b/hw/ide/macio.c index 0d2c6ba910..aca90d04f0 100644 --- a/hw/ide/macio.c +++ b/hw/ide/macio.c @@ -33,7 +33,7 @@ #include "sysemu/block-backend.h" #include "sysemu/dma.h" -#include "hw/ide/internal.h" +#include "ide-internal.h" /* debug MACIO */ // #define DEBUG_MACIO diff --git a/hw/ide/microdrive.c b/hw/ide/microdrive.c index a7f415f0fc..3bb152b5d3 100644 --- a/hw/ide/microdrive.c +++ b/hw/ide/microdrive.c @@ -31,8 +31,8 @@ #include "sysemu/dma.h" #include "hw/irq.h" -#include "hw/ide/internal.h" #include "qom/object.h" +#include "ide-internal.h" #define TYPE_MICRODRIVE "microdrive" OBJECT_DECLARE_SIMPLE_TYPE(MicroDriveState, MICRODRIVE) diff --git a/hw/ide/mmio.c b/hw/ide/mmio.c index e8f41c0610..8736281305 100644 --- a/hw/ide/mmio.c +++ b/hw/ide/mmio.c @@ -30,8 +30,8 @@ #include "sysemu/dma.h" #include "hw/ide/mmio.h" -#include "hw/ide/internal.h" #include "hw/qdev-properties.h" +#include "ide-internal.h" /***********************************************************/ /* MMIO based ide port diff --git a/hw/ide/pci.c b/hw/ide/pci.c index 73efeec7f4..4675d079a1 100644 --- a/hw/ide/pci.c +++ b/hw/ide/pci.c @@ -30,8 +30,8 @@ #include "sysemu/dma.h" #include "qemu/error-report.h" #include "qemu/module.h" -#include "hw/ide/internal.h" #include "hw/ide/pci.h" +#include "ide-internal.h" #include "trace.h" #define BMDMA_PAGE_SIZE 4096 diff --git a/hw/ide/piix.c b/hw/ide/piix.c index 1773a068c3..80efc633d3 100644 --- a/hw/ide/piix.c +++ b/hw/ide/piix.c @@ -30,9 +30,9 @@ #include "qemu/osdep.h" #include "qapi/error.h" #include "hw/pci/pci.h" -#include "hw/ide/internal.h" #include "hw/ide/piix.h" #include "hw/ide/pci.h" +#include "ide-internal.h" #include "trace.h" static uint64_t bmdma_read(void *opaque, hwaddr addr, unsigned size) diff --git a/hw/ide/sii3112.c b/hw/ide/sii3112.c index 321b9e46a1..af17384ff2 100644 --- a/hw/ide/sii3112.c +++ b/hw/ide/sii3112.c @@ -13,11 +13,11 @@ */ #include "qemu/osdep.h" -#include "hw/ide/internal.h" #include "hw/ide/pci.h" #include "qemu/module.h" #include "trace.h" #include "qom/object.h" +#include "ide-internal.h" #define TYPE_SII3112_PCI "sii3112" OBJECT_DECLARE_SIMPLE_TYPE(SiI3112PCIState, SII3112_PCI) diff --git a/hw/ide/via.c b/hw/ide/via.c index cf151e70ec..a32f56b0e7 100644 --- a/hw/ide/via.c +++ b/hw/ide/via.c @@ -25,7 +25,6 @@ */ #include "qemu/osdep.h" -#include "hw/ide/internal.h" #include "hw/pci/pci.h" #include "migration/vmstate.h" #include "qemu/module.h" @@ -34,6 +33,7 @@ #include "hw/isa/vt82c686.h" #include "hw/ide/pci.h" #include "hw/irq.h" +#include "ide-internal.h" #include "trace.h" static uint64_t bmdma_read(void *opaque, hwaddr addr,