Implied by QEMU >= 1.2.0.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
static void
virQEMUCapsInitQMPBasic(virQEMUCapsPtr qemuCaps)
{
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_NO_SHUTDOWN);
virQEMUCapsSet(qemuCaps, QEMU_CAPS_DRIVE_CACHE_UNSAFE);
virQEMUCapsSet(qemuCaps, QEMU_CAPS_FSDEV_READONLY);
virQEMUCapsSet(qemuCaps, QEMU_CAPS_DRIVE_COPY_ON_READ);
QEMU_CAPS_PCI_OHCI, /* -device pci-ohci */
QEMU_CAPS_USB_REDIR, /* -device usb-redir */
QEMU_CAPS_USB_HUB, /* -device usb-hub */
- QEMU_CAPS_NO_SHUTDOWN, /* usable -no-shutdown */
+ X_QEMU_CAPS_NO_SHUTDOWN, /* usable -no-shutdown */
/* 75 */
QEMU_CAPS_DRIVE_CACHE_UNSAFE, /* Is cache=unsafe supported? */
* when QEMU stops. If we use no-shutdown, then we can
* watch for this event and do a soft/warm reboot.
*/
- if (priv->monJSON && priv->allowReboot == VIR_TRISTATE_BOOL_YES &&
- virQEMUCapsGet(qemuCaps, QEMU_CAPS_NO_SHUTDOWN)) {
+ if (priv->monJSON && priv->allowReboot == VIR_TRISTATE_BOOL_YES)
virCommandAddArg(cmd, "-no-shutdown");
- }
if (virQEMUCapsGet(qemuCaps, QEMU_CAPS_NO_ACPI)) {
if (def->features[VIR_DOMAIN_FEATURE_ACPI] != VIR_TRISTATE_SWITCH_ON)
*/
if ((!useAgent) ||
(ret < 0 && (acpiRequested || !flags))) {
-#if WITH_YAJL
- if (!virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_NO_SHUTDOWN)) {
- virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
- _("ACPI reboot is not supported with this QEMU binary"));
- goto endjob;
- }
-#else
+#if !WITH_YAJL
virReportError(VIR_ERR_OPERATION_INVALID, "%s",
_("ACPI reboot is not supported without the JSON monitor"));
goto endjob;
/* We can't get the monitor back, so must kill the VM
* to remove danger of it ending up running twice if
* user tries to start it again later
- */
- if (virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_NO_SHUTDOWN)) {
- /* If we couldn't get the monitor and qemu supports
- * no-shutdown, we can safely say that the domain
- * crashed ... */
- state = VIR_DOMAIN_SHUTOFF_CRASHED;
- } else {
- /* ... but if it doesn't we can't say what the state
- * really is and FAILED means "failed to start" */
- state = VIR_DOMAIN_SHUTOFF_UNKNOWN;
- }
+ * If we couldn't get the monitor since QEMU supports
+ * no-shutdown, we can safely say that the domain
+ * crashed ... */
+ state = VIR_DOMAIN_SHUTOFF_CRASHED;
/* If BeginJob failed, we jumped here without a job, let's hope another
* thread didn't have a chance to start playing with the domain yet
* (it's all we can do anyway).
<flag name='pci-ohci'/>
<flag name='usb-redir'/>
<flag name='usb-hub'/>
- <flag name='no-shutdown'/>
<flag name='cache-unsafe'/>
<flag name='ich9-ahci'/>
<flag name='no-acpi'/>
<flag name='pci-ohci'/>
<flag name='usb-redir'/>
<flag name='usb-hub'/>
- <flag name='no-shutdown'/>
<flag name='cache-unsafe'/>
<flag name='ich9-ahci'/>
<flag name='no-acpi'/>
<flag name='pci-ohci'/>
<flag name='usb-redir'/>
<flag name='usb-hub'/>
- <flag name='no-shutdown'/>
<flag name='cache-unsafe'/>
<flag name='ich9-ahci'/>
<flag name='no-acpi'/>
<flag name='pci-ohci'/>
<flag name='usb-redir'/>
<flag name='usb-hub'/>
- <flag name='no-shutdown'/>
<flag name='cache-unsafe'/>
<flag name='ich9-ahci'/>
<flag name='no-acpi'/>
<flag name='vt82c686b-usb-uhci'/>
<flag name='pci-ohci'/>
<flag name='usb-hub'/>
- <flag name='no-shutdown'/>
<flag name='cache-unsafe'/>
<flag name='ich9-ahci'/>
<flag name='no-acpi'/>
<flag name='vt82c686b-usb-uhci'/>
<flag name='pci-ohci'/>
<flag name='usb-hub'/>
- <flag name='no-shutdown'/>
<flag name='cache-unsafe'/>
<flag name='ich9-ahci'/>
<flag name='fsdev-readonly'/>
<flag name='virtio-blk-pci.ioeventfd'/>
<flag name='virtio-blk-pci.event_idx'/>
<flag name='virtio-net-pci.event_idx'/>
- <flag name='no-shutdown'/>
<flag name='cache-unsafe'/>
<flag name='fsdev-readonly'/>
<flag name='virtio-blk-pci.scsi'/>
<flag name='pci-ohci'/>
<flag name='usb-redir'/>
<flag name='usb-hub'/>
- <flag name='no-shutdown'/>
<flag name='cache-unsafe'/>
<flag name='ich9-ahci'/>
<flag name='no-acpi'/>
<flag name='virtio-blk-pci.ioeventfd'/>
<flag name='virtio-blk-pci.event_idx'/>
<flag name='virtio-net-pci.event_idx'/>
- <flag name='no-shutdown'/>
<flag name='cache-unsafe'/>
<flag name='fsdev-readonly'/>
<flag name='virtio-blk-pci.scsi'/>
<flag name='vt82c686b-usb-uhci'/>
<flag name='pci-ohci'/>
<flag name='usb-hub'/>
- <flag name='no-shutdown'/>
<flag name='cache-unsafe'/>
<flag name='ich9-ahci'/>
<flag name='no-acpi'/>
<flag name='vt82c686b-usb-uhci'/>
<flag name='pci-ohci'/>
<flag name='usb-hub'/>
- <flag name='no-shutdown'/>
<flag name='cache-unsafe'/>
<flag name='ich9-ahci'/>
<flag name='fsdev-readonly'/>
<flag name='virtio-blk-pci.ioeventfd'/>
<flag name='virtio-blk-pci.event_idx'/>
<flag name='virtio-net-pci.event_idx'/>
- <flag name='no-shutdown'/>
<flag name='cache-unsafe'/>
<flag name='fsdev-readonly'/>
<flag name='virtio-blk-pci.scsi'/>
<flag name='pci-ohci'/>
<flag name='usb-redir'/>
<flag name='usb-hub'/>
- <flag name='no-shutdown'/>
<flag name='cache-unsafe'/>
<flag name='ich9-ahci'/>
<flag name='no-acpi'/>
<flag name='pci-ohci'/>
<flag name='usb-redir'/>
<flag name='usb-hub'/>
- <flag name='no-shutdown'/>
<flag name='cache-unsafe'/>
<flag name='ich9-ahci'/>
<flag name='no-acpi'/>
<flag name='pci-ohci'/>
<flag name='usb-redir'/>
<flag name='usb-hub'/>
- <flag name='no-shutdown'/>
<flag name='cache-unsafe'/>
<flag name='ich9-ahci'/>
<flag name='no-acpi'/>
<flag name='vt82c686b-usb-uhci'/>
<flag name='pci-ohci'/>
<flag name='usb-hub'/>
- <flag name='no-shutdown'/>
<flag name='cache-unsafe'/>
<flag name='ich9-ahci'/>
<flag name='no-acpi'/>
<flag name='vt82c686b-usb-uhci'/>
<flag name='pci-ohci'/>
<flag name='usb-hub'/>
- <flag name='no-shutdown'/>
<flag name='cache-unsafe'/>
<flag name='ich9-ahci'/>
<flag name='fsdev-readonly'/>
<flag name='pci-ohci'/>
<flag name='usb-redir'/>
<flag name='usb-hub'/>
- <flag name='no-shutdown'/>
<flag name='cache-unsafe'/>
<flag name='ich9-ahci'/>
<flag name='no-acpi'/>
<flag name='virtio-blk-pci.ioeventfd'/>
<flag name='virtio-blk-pci.event_idx'/>
<flag name='virtio-net-pci.event_idx'/>
- <flag name='no-shutdown'/>
<flag name='cache-unsafe'/>
<flag name='fsdev-readonly'/>
<flag name='virtio-blk-pci.scsi'/>
<flag name='pci-ohci'/>
<flag name='usb-redir'/>
<flag name='usb-hub'/>
- <flag name='no-shutdown'/>
<flag name='cache-unsafe'/>
<flag name='ich9-ahci'/>
<flag name='no-acpi'/>
<flag name='virtio-blk-pci.ioeventfd'/>
<flag name='virtio-blk-pci.event_idx'/>
<flag name='virtio-net-pci.event_idx'/>
- <flag name='no-shutdown'/>
<flag name='cache-unsafe'/>
<flag name='fsdev-readonly'/>
<flag name='virtio-blk-pci.scsi'/>
<flag name='pci-ohci'/>
<flag name='usb-redir'/>
<flag name='usb-hub'/>
- <flag name='no-shutdown'/>
<flag name='cache-unsafe'/>
<flag name='ich9-ahci'/>
<flag name='no-acpi'/>
<flag name='vt82c686b-usb-uhci'/>
<flag name='pci-ohci'/>
<flag name='usb-hub'/>
- <flag name='no-shutdown'/>
<flag name='cache-unsafe'/>
<flag name='ich9-ahci'/>
<flag name='fsdev-readonly'/>
<flag name='virtio-blk-pci.ioeventfd'/>
<flag name='virtio-blk-pci.event_idx'/>
<flag name='virtio-net-pci.event_idx'/>
- <flag name='no-shutdown'/>
<flag name='cache-unsafe'/>
<flag name='fsdev-readonly'/>
<flag name='virtio-blk-pci.scsi'/>
<flag name='pci-ohci'/>
<flag name='usb-redir'/>
<flag name='usb-hub'/>
- <flag name='no-shutdown'/>
<flag name='cache-unsafe'/>
<flag name='ich9-ahci'/>
<flag name='no-acpi'/>
path=/tmp/lib/domain--1-aarch64test/monitor.sock,server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-kernel /aarch64.kernel \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c
path=/tmp/lib/domain--1-aarch64test/monitor.sock,server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-drive file=/aarch64.raw,format=raw,if=none,id=drive-virtio-disk0 \
path=/tmp/lib/domain--1-aarch64test/monitor.sock,server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c
path=/tmp/lib/domain--1-aarch64test/monitor.sock,server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c
path=/tmp/lib/domain--1-aarch64test/monitor.sock,server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-kernel /arm.kernel \
-initrd /arm.initrd \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-kernel /var/lib/libvirt/images/guest.vmlinuz \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c
path=/tmp/lib/domain--1-aarch64test/monitor.sock,server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device i82801b11-bridge,id=pci.1,bus=pcie.0,addr=0x1 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device pcie-root-port,port=0x8,chassis=1,id=pci.1,bus=pcie.0,multifunction=on,\
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device nec-usb-xhci,id=usb,bus=pcie.0,addr=0x1
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device qemu-xhci,id=usb,bus=pcie.0,addr=0x1
path=/tmp/lib/domain--1-aarch64-vgpu/monitor.sock,server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device i82801b11-bridge,id=pci.1,bus=pcie.0,addr=0x1 \
path=/tmp/lib/domain--1-aarch64-vgpu/monitor.sock,server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-device ioh3420,port=0x8,chassis=1,id=pci.1,bus=pcie.0,multifunction=on,\
addr=0x1 \
path=/tmp/lib/domain--1-aarch64test/monitor.sock,server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-kernel /aarch64.kernel \
path=/tmp/lib/domain--1-aarch64-virt-default/monitor.sock,server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-kernel /aarch64.kernel \
path=/tmp/lib/domain--1-aarch64test/monitor.sock,server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-kernel /aarch64.kernel \
path=/tmp/lib/domain--1-aarch64test/monitor.sock,server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-kernel /aarch64.kernel \
path=/tmp/lib/domain--1-aarch64test/monitor.sock,server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-kernel /aarch64.kernel \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-acpitable sig=SLIC,file=/var/lib/libvirt/acpi/slic.dat \
-usb
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-kernel /arm.kernel \
-initrd /arm.initrd \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-kernel /arm.kernel \
-initrd /arm.initrd \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-kernel /arm.kernel \
-initrd /arm.initrd \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-kernel /arm.kernel \
-initrd /arm.initrd \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device i82801b11-bridge,id=pci.1,bus=pcie.0,addr=0x1e \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-device virtio-balloon-ccw,id=balloon0,devno=fe.0.000a,deflate-on-oom=on
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
path=/tmp/lib/domain--1-aarch64test/monitor.sock,server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-kernel /aarch64.kernel \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot order=c,menu=on \
-device i82801b11-bridge,id=pci.1,bus=pcie.0,addr=0x1e \
-device pci-bridge,chassis_nr=2,id=pci.2,bus=pci.1,addr=0x0 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot order=c,menu=on \
-usb \
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot order=c,menu=on \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot d \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-usb \
-drive file=/tmp/vda.img,format=raw,if=none,id=drive-virtio-disk0 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot dnca \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot a \
-drive file=/tmp/firmware.img,format=raw,if=none,id=drive-fdc0-0-0 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot a \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot menu=off \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot order=d,menu=off \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot order=d,menu=off \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot menu=on \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot order=d,menu=on,splash-time=3000 \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot order=d,menu=on \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot order=dcna,menu=on \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot n \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-usb \
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot strict=on \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-drive file=/tmp/firmware.img,format=raw,if=none,id=drive-fdc0-0-0 \
-device isa-fdc,driveA=drive-fdc0-0-0,bootindexA=1
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device virtio-serial-pci,id=virtio-serial1,bus=pci.0,addr=0xa \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device virtio-serial-pci,id=virtio-serial0,max_ports=16,vectors=4,bus=pci.0,\
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device virtio-serial-pci,id=virtio-serial0,max_ports=4,vectors=4,bus=pci.0,\
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device virtio-serial-pci,id=virtio-serial0,max_ports=4,vectors=4,bus=pci.0,\
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device virtio-serial-pci,id=virtio-serial1,bus=pci.0,addr=0xa \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device virtio-serial-pci,id=virtio-serial1,bus=pci.0,addr=0xa \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device virtio-serial-pci,id=virtio-serial1,bus=pci.0,addr=0xa \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device virtio-serial-pci,id=virtio-serial1,bus=pci.0,addr=0xa \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device virtio-serial-pci,id=virtio-serial1,bus=pci.0,addr=0xa \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc,driftfix=slew \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=localtime \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
-rtc base=utc,driftfix=slew \
-no-kvm-pit-reinjection \
-no-hpet \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=2009-02-14T00:01:30 \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=localtime \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot n \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=2009-02-15T09:49:06 \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-virtio-disk0 \
-device virtio-blk-s390,drive=drive-virtio-disk0,id=virtio-disk0 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-device virtio-serial-ccw,id=virtio-serial0,devno=fe.0.0001 \
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-virtio-disk0 \
-device virtio-blk-ccw,devno=fe.0.0000,drive=drive-virtio-disk0,\
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x3 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-device virtio-serial-s390,id=virtio-serial0 \
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-virtio-disk0 \
-device virtio-blk-s390,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x3 \
nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot order=cna,menu=off \
-device piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 \
-device virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x7 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot n \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot n \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot n \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot n \
-usb \
nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot n \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot n \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot n \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot n \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot n \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot n \
-usb \
-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot n \
-usb \
-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot n \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot n \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot n \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot n \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot n \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot n \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot n \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot n \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot n \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot n \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot n \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot n \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot n \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot n \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot n \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot n \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot n \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot n \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot n \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot n \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot n \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot n \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot n \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot d \
-usb \
-drive file=ftp://host.name:21/url/path/file.iso,format=raw,if=none,\
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot d \
-usb \
-drive file=ftps://host.name:990/url/path/file.iso,format=raw,if=none,\
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot d \
-usb \
-drive file=http://host.name:80/url/path/file.iso,format=raw,if=none,\
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot d \
-usb \
-drive file=https://host.name:443/url/path/file.iso,format=raw,if=none,\
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot d \
-usb \
-drive file=tftp://host.name:69/url/path/file.iso,format=raw,if=none,\
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot order=dc,menu=on \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot order=dc,menu=on \
-device virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x6 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot d \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot order=dc,menu=on \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot order=dc,menu=on \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x3 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x3 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-usb \
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x3 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x3 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot order=dc,menu=on \
-device virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x6 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device ahci,id=sata0,bus=pci.0,addr=0x3 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device lsi,id=scsi0,bus=pci.0,addr=0x3 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device lsi,id=scsi0,bus=pci.0,addr=0x3 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x3 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x3 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x3 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x3 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device megasas,id=scsi0,bus=pci.0,addr=0x3 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device mptsas1068,id=scsi0,bus=pci.0,addr=0x3 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x3 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device spapr-vscsi,id=scsi0,reg=0x2000 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-virtio-disk0 \
-device virtio-blk-ccw,devno=0.0.0007,drive=drive-virtio-disk0,id=virtio-disk0 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-virtio-disk0 \
-device virtio-blk-ccw,devno=fe.0.0000,drive=drive-virtio-disk0,\
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-virtio-disk0 \
-device virtio-blk-s390,drive=drive-virtio-disk0,id=virtio-disk0
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-device virtio-scsi-ccw,id=scsi0,devno=fe.0.0001 \
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-virtio-disk0 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device virtio-scsi-pci,id=scsi0,cmd_per_lun=50,bus=pci.0,addr=0x3 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device virtio-scsi-pci,id=scsi0,ioeventfd=on,bus=pci.0,addr=0x3 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device virtio-scsi-pci,id=scsi0,max_sectors=512,bus=pci.0,addr=0x3 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device virtio-scsi-pci,id=scsi0,num_queues=8,bus=pci.0,addr=0x3 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
path=/tmp/lib/domain--1-encryptdisk/monitor.sock,server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
path=/tmp/lib/domain--1-encryptdisk/monitor.sock,server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot n \
-usb \
-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot n \
-usb \
-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot order=dc,menu=on \
-device virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x6 \
path=/tmp/lib/domain--1-instance-00000092/monitor.sock,server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
path=/tmp/lib/domain--1-instance-00000092/monitor.sock,server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
path=/tmp/lib/domain--1-instance-00000092/monitor.sock,server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
path=/tmp/lib/domain--1-instance-00000092/monitor.sock,server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot a \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-virtio-disk0 \
-device virtio-blk-ccw,devno=fe.0.0000,drive=drive-virtio-disk0,\
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device virtio-serial-pci,id=virtio-serial1,bus=pci.0,addr=0xa \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot order=dc,menu=on \
-device virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x6 \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device ich9-usb-ehci1,id=usb,bus=pci.0,addr=0x4.0x7 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device lsi,id=scsi0,bus=pci.0,addr=0x3 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device lsi,id=scsi0,bus=pci.0,addr=0x3 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device lsi,id=scsi0,bus=pci.0,addr=0x3 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x3 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-device virtio-scsi-ccw,id=scsi0,devno=fe.0.0001 \
-drive file=/dev/HostVG/QEMUGuest2,format=raw,if=none,id=drive-virtio-disk0 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x3 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device pcie-root-port,port=0x10,chassis=1,id=pci.1,bus=pcie.0,\
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x3 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x3 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x3 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-usb \
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-device virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x3 \
-device virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x4 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
-rtc base=utc,driftfix=slew \
-no-kvm-pit-reinjection \
-no-hpet \
+-no-shutdown \
-global PIIX4_PM.disable_s3=1 \
-global PIIX4_PM.disable_s4=1 \
-boot c \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
path=/tmp/lib/domain--1-SomeDummyHugepagesGu/monitor.sock,server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
path=/tmp/lib/domain--1-SomeDummyHugepagesGu/monitor.sock,server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
path=/tmp/lib/domain--1-SomeDummyHugepagesGu/monitor.sock,server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
path=/tmp/lib/domain--1-SomeDummyHugepagesGu/monitor.sock,server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-usb \
-drive file=/var/lib/libvirt/images/fedora.qcow2,format=qcow2,if=none,\
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot n \
-usb \
-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot n \
-usb
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot n \
-usb
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-virtio-disk0 \
-device virtio-blk-ccw,devno=fe.0.0000,drive=drive-virtio-disk0,\
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device intel-iommu,intremap=on,caching-mode=on \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device intel-iommu,intremap=on,device-iotlb=on
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device intel-iommu,intremap=on,eim=on
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device intel-iommu
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-virtio-disk0 \
-device virtio-blk-ccw,iothread=iothread1,devno=fe.0.0000,\
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-device virtio-scsi-ccw,iothread=iothread2,id=scsi0,devno=fe.0.0001 \
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-virtio-disk0 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device virtio-scsi-pci,iothread=iothread2,id=scsi0,bus=pci.0,addr=0xb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot n \
-usb \
-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot n \
-usb
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
-global kvm-pit.lost_tick_policy=delay \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
-global kvm-pit.lost_tick_policy=discard \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot n \
-usb \
-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot n \
-usb
path=/tmp/lib/domain--1-encryptdisk/monitor.sock,server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
path=/tmp/lib/domain--1-encryptdisk/monitor.sock,server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
path=/tmp/lib/domain--1-encryptdisk/monitor.sock,server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device virtio-serial,id=virtio-serial0 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-chardev pty,id=charserial0 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device i82801b11-bridge,id=pci.1,bus=pcie.0,addr=0x1 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device pcie-root-port,port=0x8,chassis=1,id=pci.1,bus=pcie.0,multifunction=on,\
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-virtio-disk0 \
-device virtio-blk-ccw,devno=fe.0.0000,drive=drive-virtio-disk0,\
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-virtio-disk0 \
-device virtio-blk-ccw,devno=fe.0.0000,drive=drive-virtio-disk0,\
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-virtio-disk0 \
-device virtio-blk-ccw,devno=fe.0.0000,drive=drive-virtio-disk0,\
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-virtio-disk0 \
-device virtio-blk-ccw,devno=fe.0.0000,drive=drive-virtio-disk0,\
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-virtio-disk0 \
-device virtio-blk-ccw,devno=fe.0.0000,drive=drive-virtio-disk0,\
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-virtio-disk0 \
-device virtio-blk-ccw,devno=fe.0.0000,drive=drive-virtio-disk0,\
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-virtio-disk0 \
-device virtio-blk-ccw,devno=fe.0.0000,drive=drive-virtio-disk0,\
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-virtio-disk0 \
-device virtio-blk-ccw,devno=fe.0.0000,drive=drive-virtio-disk0,\
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-virtio-disk0 \
-device virtio-blk-ccw,devno=fe.0.0000,drive=drive-virtio-disk0,\
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-virtio-disk0 \
-device virtio-blk-ccw,devno=fe.0.0000,drive=drive-virtio-disk0,\
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-virtio-disk0 \
-device virtio-blk-ccw,devno=fe.0.0002,drive=drive-virtio-disk0,\
id=virtio-disk0,bootindex=1 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-netdev user,id=hostnet0 \
-device virtio-net-ccw,netdev=hostnet0,id=net0,mac=00:11:22:33:44:54,\
devno=fe.0.0000,bootindex=1 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-virtio-disk0 \
-device virtio-blk-ccw,devno=fe.0.0000,drive=drive-virtio-disk0,\
id=virtio-disk0,bootindex=1 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device i82801b11-bridge,id=pci.1,bus=pcie.0,addr=0x1e \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-kernel /media/ram/uImage \
-initrd /media/ram/ramdisk \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-usb \
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-global PIIX4_PM.disable_s3=1 \
-boot c \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-global PIIX4_PM.disable_s3=1 \
-global PIIX4_PM.disable_s4=1 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-global PIIX4_PM.disable_s4=0 \
-boot c \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-usb \
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb
path=/tmp/lib/domain--1-encryptdisk/monitor.sock,server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device lsi,id=scsi0,bus=pci.0,multifunction=off,addr=0x3 \
bar=2/monitor.sock,server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-netdev user,id=hostnet0 \
-device virtio-net-ccw,netdev=hostnet0,id=net0,mac=00:11:22:33:44:55,\
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-netdev user,id=hostnet0 \
-device virtio-net-s390,netdev=hostnet0,id=net0,mac=00:11:22:33:44:55
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
-no-kvm-pit-reinjection \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-usb \
-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x2
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot n \
-usb \
-device pvpanic,ioport=1285
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-device pci-bridge,chassis_nr=1,id=pci.1,bus=pci.0,addr=0x3 \
-device pci-bridge,chassis_nr=2,id=pci.2,bus=pci.0,addr=0x4 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-device pci-bridge,chassis_nr=8,id=pci.8,bus=pci.0,addr=0x3 \
-device pci-bridge,chassis_nr=1,id=pci.1,bus=pci.0,addr=0x4 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
path=/tmp/lib/domain--1-lots-of-disks/monitor.sock,server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-device pci-bridge,chassis_nr=1,id=pci.1,bus=pci.0,addr=0x3 \
-device pci-bridge,chassis_nr=2,id=pci.2,bus=pci.0,addr=0x4 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-device pci-bridge,chassis_nr=1,id=pci.1,bus=pci.0,addr=0x3 \
-device pci-bridge,chassis_nr=2,id=pci.2,bus=pci.0,addr=0x4 \
path=/tmp/lib/domain--1-expander-test/monitor.sock,server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device pxb,bus_nr=254,id=pci.1,numa_node=1,bus=pci.0,addr=0x3 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-usb \
-drive file=/var/iso/f18kde.iso,format=raw,if=none,id=drive-ide0-1-0,\
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
path=/tmp/lib/domain--1-pcie-expander-bus-te/monitor.sock,server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device pxb-pcie,bus_nr=254,id=pci.1,numa_node=0,bus=pcie.0,addr=0x4 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device pcie-root-port,port=0x10,chassis=1,id=pci.1,bus=pcie.0,\
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device ioh3420,port=0x10,chassis=1,id=pci.1,bus=pcie.0,multifunction=on,\
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device ioh3420,port=0x10,chassis=1,id=pci.1,bus=pcie.0,multifunction=on,\
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device ioh3420,port=0x10,chassis=1,id=pci.1,bus=pcie.0,addr=0x2 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device ioh3420,port=0x10,chassis=1,id=pci.1,bus=pcie.0,multifunction=on,\
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-global q35-pcihost.pci-hole64-size=1048576K \
nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-global i440FX-pcihost.pci-hole64-size=1048576K \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot n \
-usb
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot n \
-usb
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-kernel /media/ram/uImage \
-initrd /media/ram/ramdisk \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-usb \
-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x6
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-device qemu-xhci,id=usb,bus=pci.0,addr=0x1 \
-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x6
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-device pci-ohci,id=usb,bus=pci.0,addr=0x1 \
-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x6
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-kernel /media/ram/uImage \
-initrd /media/ram/ramdisk \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-usb \
-chardev pty,id=charserial0 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-device virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x1 \
-chardev pty,id=charconsole0 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-usb \
-chardev pty,id=charserial0 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-usb \
-chardev pty,id=charserial0 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-usb \
-chardev pty,id=charserial0 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-usb \
-chardev pty,id=charserial0 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-device spapr-pci-host-bridge,index=1,id=pci.1 \
-device spapr-pci-host-bridge,index=2,id=pci.2 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-device spapr-pci-host-bridge,index=1,id=pci.1 \
-device spapr-pci-host-bridge,index=2,id=pci.2 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-device spapr-pci-host-bridge,index=1,id=pci.1 \
-device spapr-pci-host-bridge,index=2,id=pci.2 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-device spapr-pci-host-bridge,index=1,id=pci.1 \
-device virtio-scsi-pci,id=scsi0,bus=pci.1.0,addr=0x1
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-device spapr-pci-host-bridge,index=1,id=pci.2 \
-device spapr-pci-host-bridge,index=2,id=pci.1
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-device spapr-pci-host-bridge,index=1,id=pci.1 \
-device virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x1 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-usb \
-global spapr-nvram.reg=0x4000
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-usb \
-chardev pty,id=charserial0 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-usb \
-chardev pty,id=charserial0 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-device spapr-pci-host-bridge,index=1,id=pci.1 \
-device spapr-pci-host-bridge,index=2,id=pci.2
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-device spapr-pci-host-bridge,index=1,id=pci.1,numa_node=1 \
-device spapr-pci-host-bridge,index=2,id=pci.2 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-device spapr-pci-host-bridge,index=1,id=pci.1 \
-device spapr-pci-host-bridge,index=2,id=pci.2
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-chardev pty,id=charserial0 \
-device spapr-vty,chardev=charserial0,id=serial0,reg=0x30000000
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-chardev pty,id=charserial0 \
-device pci-serial,chardev=charserial0,id=serial0,bus=pci.0,addr=0x1
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-device qemu-xhci,id=usb,bus=pci.0,addr=0x1 \
-chardev pty,id=charserial0 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-device pci-ohci,id=usb,bus=pci.0,addr=0x1 \
-chardev pty,id=charserial0 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-device pci-ohci,id=usb,bus=pci.0,addr=0x1 \
-chardev pty,id=charserial0 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-device piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1 \
-device pci-ohci,id=usb1,bus=pci.0,addr=0x2 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-device spapr-vscsi,id=scsi0,reg=0x2000 \
-device spapr-vscsi,id=scsi1,reg=0x30000000 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-device spapr-vscsi,id=scsi0,reg=0x2000 \
-device spapr-vscsi,id=scsi1,reg=0x3000 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot n \
-usb \
-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot n \
-usb \
-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-kernel /var/lib/libvirt/images/guest.vmlinuz \
-initrd /var/lib/libvirt/images/guest.initramfs \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device ioh3420,port=0x8,chassis=1,id=pci.1,bus=pcie.0,multifunction=on,\
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device ioh3420,port=0x10,chassis=1,id=pci.1,bus=pcie.0,multifunction=on,\
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-kernel /var/lib/libvirt/images/guest.vmlinuz \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device i82801b11-bridge,id=pci.1,bus=pcie.0,addr=0x1e \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device ioh3420,port=0x10,chassis=1,id=pci.1,bus=pcie.0,multifunction=on,\
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device i82801b11-bridge,id=pci.1,bus=pcie.0,addr=0x1e \
nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-global PIIX4_PM.disable_s3=1 \
-global PIIX4_PM.disable_s4=1 \
nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-global ICH9-LPC.disable_s3=1 \
-global ICH9-LPC.disable_s4=1 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device i82801b11-bridge,id=pci.1,bus=pcie.0,addr=0x1e \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device i82801b11-bridge,id=pci.1,bus=pcie.0,addr=0x1e \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device i82801b11-bridge,id=pci.1,bus=pcie.0,addr=0x1e \
-rtc base=utc,driftfix=slew \
-no-kvm-pit-reinjection \
-no-hpet \
+-no-shutdown \
-global ICH9-LPC.disable_s3=1 \
-global ICH9-LPC.disable_s4=1 \
-boot c \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device i82801b11-bridge,id=pci.1,bus=pcie.0,addr=0x1e \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device ich9-usb-ehci1,id=usb,bus=pcie.0,addr=0x1d.0x7 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot order=n,reboot-timeout=-1 \
-usb
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot order=n,reboot-timeout=128 \
-usb
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-device virtio-serial-s390,id=virtio-serial0 \
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-virtio-disk0 \
-device virtio-blk-s390,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-device virtio-serial-s390,id=virtio-serial0 \
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-virtio-disk0 \
-device virtio-blk-s390,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-device virtio-serial-ccw,id=virtio-serial0,devno=fe.0.0000 \
-chardev pty,id=charconsole0 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-device virtio-serial-ccw,id=virtio-serial0,devno=fe.0.0000 \
-chardev pty,id=charconsole0 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-chardev pty,id=charserial0 \
-device sclpconsole,chardev=charserial0,id=serial0 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-chardev pty,id=charserial0 \
-device sclpconsole,chardev=charserial0,id=serial0
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-chardev pty,id=charserial0 \
-device sclpconsole,chardev=charserial0,id=serial0
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device usb-ccid,id=ccid0,bus=usb.0,port=1 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device usb-ccid,id=ccid0,bus=usb.0,port=1 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device usb-ccid,id=ccid0,bus=usb.0,port=1 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device usb-ccid,id=ccid0,bus=usb.0,port=1 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device usb-ccid,id=ccid0,bus=usb.0,port=1 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot order=c,menu=on \
-usb \
-tpmdev passthrough,id=tpm-tpm0,path=/dev/tpm0,\
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device piix3-usb-uhci,id=usb,bus=pcie.0,addr=0x1
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device nec-usb-xhci,id=usb,bus=pcie.0,addr=0x1
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device qemu-xhci,p2=8,p3=8,id=usb,bus=pci.0,addr=0x3
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device nec-usb-xhci,p2=8,p3=8,id=usb,bus=pci.0,addr=0x3
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device ich9-usb-ehci1,id=usb,bus=pci.0,addr=0x4.0x7 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device ich9-usb-ehci1,id=usb,bus=pci.0,addr=0x4.0x7 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device ich9-usb-ehci1,id=usb,bus=pci.0,addr=0x3.0x7 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-device ich9-usb-ehci1,id=usb,bus=pci.0,addr=0x4.0x7 \
-device ich9-usb-uhci1,masterbus=usb.0,firstport=0,bus=pci.0,multifunction=on,\
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device ich9-usb-ehci1,id=usb,bus=pci.0,addr=0x4.0x7 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device ich9-usb-ehci1,id=usb,bus=pci.0,addr=0x4.0x7 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device nec-usb-xhci,p2=8,p3=8,id=usb,bus=pci.0,addr=0x3 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-global PIIX4_PM.disable_s3=0 \
-global PIIX4_PM.disable_s4=0 \
-boot cd \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-global PIIX4_PM.disable_s3=0 \
-global PIIX4_PM.disable_s4=0 \
-boot cd \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-boot c \
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-virtio-disk0 \
-device virtio-blk-ccw,devno=fe.0.0000,drive=drive-virtio-disk0,\
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot order=dc,menu=on \
-device virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x6 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-device virtio-scsi-pci,iommu_platform=on,ats=on,id=scsi0,bus=pci.0,addr=0x8 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-device virtio-serial-ccw,id=virtio-serial0,devno=fe.0.0001 \
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-virtio-disk0 \
-device virtio-blk-ccw,devno=fe.0.0000,drive=drive-virtio-disk0,\
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-virtio-disk0 \
-device virtio-blk-s390,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1 \
-device diag288,id=watchdog0 \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c \
-usb \
nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
+-no-shutdown \
-no-acpi \
-boot c
QEMU_CAPS_SCSI_LSI);
DO_TEST("monitor-json", NONE);
- DO_TEST("no-shutdown",
- QEMU_CAPS_NO_SHUTDOWN);
DO_TEST("seclabel-dynamic", NONE);
DO_TEST("seclabel-dynamic-baselabel", NONE);
projects / libvirt.git / commitdiff