aspeed/smc: Use max number of CE instead of 'num_cs'

The Aspeed SMC model uses the 'num_cs' field to allocate resources
fitting the number of devices of the machine. This is a small
optimization without real need in the controller. Simplify modelling
and use the max_peripherals field instead.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220307071856.1410731-2-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

diff --git a/hw/ssi/aspeed_smc.c b/hw/ssi/aspeed_smc.c
index d899be17fd71c6d1939f5551191a236d066e733f..a5d8bb717fc74c6c6a0e814c8a1076764d036f22 100644 (file)
--- a/hw/ssi/aspeed_smc.c
+++ b/hw/ssi/aspeed_smc.c
@@ -693,7 +693,7 @@ static void aspeed_smc_reset(DeviceState *d)
     }
 
     /* Unselect all peripherals */
-    for (i = 0; i < s->num_cs; ++i) {
+    for (i = 0; i < asc->max_peripherals; ++i) {
         s->regs[s->r_ctrl0 + i] |= CTRL_CE_STOP_ACTIVE;
         qemu_set_irq(s->cs_lines[i], true);
     }
@@ -1042,7 +1042,7 @@ static void aspeed_smc_write(void *opaque, hwaddr addr, uint64_t data,
          addr < s->r_timings + asc->nregs_timings) ||
         addr == s->r_ce_ctrl) {
         s->regs[addr] = value;
-    } else if (addr >= s->r_ctrl0 && addr < s->r_ctrl0 + s->num_cs) {
+    } else if (addr >= s->r_ctrl0 && addr < s->r_ctrl0 + asc->max_peripherals) {
         int cs = addr - s->r_ctrl0;
         aspeed_smc_flash_update_ctrl(&s->flashes[cs], value);
     } else if (addr >= R_SEG_ADDR0 &&
@@ -1139,9 +1139,9 @@ static void aspeed_smc_realize(DeviceState *dev, Error **errp)
     s->spi = ssi_create_bus(dev, "spi");
 
     /* Setup cs_lines for peripherals */
-    s->cs_lines = g_new0(qemu_irq, s->num_cs);
+    s->cs_lines = g_new0(qemu_irq, asc->max_peripherals);
 
-    for (i = 0; i < s->num_cs; ++i) {
+    for (i = 0; i < asc->max_peripherals; ++i) {
         sysbus_init_irq(sbd, &s->cs_lines[i]);
     }