vmlinux-objs-$(CONFIG_ACPI) += $(obj)/acpi.o
vmlinux-objs-$(CONFIG_INTEL_TDX_GUEST) += $(obj)/tdx.o $(obj)/tdcall.o
-vmlinux-objs-$(CONFIG_EFI_MIXED) += $(obj)/efi_thunk_$(BITS).o
vmlinux-objs-$(CONFIG_EFI) += $(obj)/efi.o
-efi-obj-$(CONFIG_EFI_STUB) = $(objtree)/drivers/firmware/efi/libstub/lib.a
+vmlinux-objs-$(CONFIG_EFI_MIXED) += $(obj)/efi_mixed.o
+vmlinux-objs-$(CONFIG_EFI_STUB) += $(objtree)/drivers/firmware/efi/libstub/lib.a
-$(obj)/vmlinux: $(vmlinux-objs-y) $(efi-obj-y) FORCE
+$(obj)/vmlinux: $(vmlinux-objs-y) FORCE
$(call if_changed,ld)
OBJCOPYFLAGS_vmlinux.bin := -R .comment -S
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2014, 2015 Intel Corporation; author Matt Fleming
+ *
+ * Early support for invoking 32-bit EFI services from a 64-bit kernel.
+ *
+ * Because this thunking occurs before ExitBootServices() we have to
+ * restore the firmware's 32-bit GDT and IDT before we make EFI service
+ * calls.
+ *
+ * On the plus side, we don't have to worry about mangling 64-bit
+ * addresses into 32-bits because we're executing with an identity
+ * mapped pagetable and haven't transitioned to 64-bit virtual addresses
+ * yet.
+ */
+
+#include <linux/linkage.h>
+#include <asm/msr.h>
+#include <asm/page_types.h>
+#include <asm/processor-flags.h>
+#include <asm/segment.h>
+
+ .code64
+ .text
+SYM_FUNC_START(__efi64_thunk)
+ push %rbp
+ push %rbx
+
+ movl %ds, %eax
+ push %rax
+ movl %es, %eax
+ push %rax
+ movl %ss, %eax
+ push %rax
+
+ /* Copy args passed on stack */
+ movq 0x30(%rsp), %rbp
+ movq 0x38(%rsp), %rbx
+ movq 0x40(%rsp), %rax
+
+ /*
+ * Convert x86-64 ABI params to i386 ABI
+ */
+ subq $64, %rsp
+ movl %esi, 0x0(%rsp)
+ movl %edx, 0x4(%rsp)
+ movl %ecx, 0x8(%rsp)
+ movl %r8d, 0xc(%rsp)
+ movl %r9d, 0x10(%rsp)
+ movl %ebp, 0x14(%rsp)
+ movl %ebx, 0x18(%rsp)
+ movl %eax, 0x1c(%rsp)
+
+ leaq 0x20(%rsp), %rbx
+ sgdt (%rbx)
+
+ addq $16, %rbx
+ sidt (%rbx)
+
+ leaq 1f(%rip), %rbp
+
+ /*
+ * Switch to IDT and GDT with 32-bit segments. This is the firmware GDT
+ * and IDT that was installed when the kernel started executing. The
+ * pointers were saved at the EFI stub entry point in head_64.S.
+ *
+ * Pass the saved DS selector to the 32-bit code, and use far return to
+ * restore the saved CS selector.
+ */
+ leaq efi32_boot_idt(%rip), %rax
+ lidt (%rax)
+ leaq efi32_boot_gdt(%rip), %rax
+ lgdt (%rax)
+
+ movzwl efi32_boot_ds(%rip), %edx
+ movzwq efi32_boot_cs(%rip), %rax
+ pushq %rax
+ leaq efi_enter32(%rip), %rax
+ pushq %rax
+ lretq
+
+1: addq $64, %rsp
+ movq %rdi, %rax
+
+ pop %rbx
+ movl %ebx, %ss
+ pop %rbx
+ movl %ebx, %es
+ pop %rbx
+ movl %ebx, %ds
+ /* Clear out 32-bit selector from FS and GS */
+ xorl %ebx, %ebx
+ movl %ebx, %fs
+ movl %ebx, %gs
+
+ /*
+ * Convert 32-bit status code into 64-bit.
+ */
+ roll $1, %eax
+ rorq $1, %rax
+
+ pop %rbx
+ pop %rbp
+ RET
+SYM_FUNC_END(__efi64_thunk)
+
+ .code32
+/*
+ * EFI service pointer must be in %edi.
+ *
+ * The stack should represent the 32-bit calling convention.
+ */
+SYM_FUNC_START_LOCAL(efi_enter32)
+ /* Load firmware selector into data and stack segment registers */
+ movl %edx, %ds
+ movl %edx, %es
+ movl %edx, %fs
+ movl %edx, %gs
+ movl %edx, %ss
+
+ /* Reload pgtables */
+ movl %cr3, %eax
+ movl %eax, %cr3
+
+ /* Disable paging */
+ movl %cr0, %eax
+ btrl $X86_CR0_PG_BIT, %eax
+ movl %eax, %cr0
+
+ /* Disable long mode via EFER */
+ movl $MSR_EFER, %ecx
+ rdmsr
+ btrl $_EFER_LME, %eax
+ wrmsr
+
+ call *%edi
+
+ /* We must preserve return value */
+ movl %eax, %edi
+
+ /*
+ * Some firmware will return with interrupts enabled. Be sure to
+ * disable them before we switch GDTs and IDTs.
+ */
+ cli
+
+ lidtl (%ebx)
+ subl $16, %ebx
+
+ lgdtl (%ebx)
+
+ movl %cr4, %eax
+ btsl $(X86_CR4_PAE_BIT), %eax
+ movl %eax, %cr4
+
+ movl %cr3, %eax
+ movl %eax, %cr3
+
+ movl $MSR_EFER, %ecx
+ rdmsr
+ btsl $_EFER_LME, %eax
+ wrmsr
+
+ xorl %eax, %eax
+ lldt %ax
+
+ pushl $__KERNEL_CS
+ pushl %ebp
+
+ /* Enable paging */
+ movl %cr0, %eax
+ btsl $X86_CR0_PG_BIT, %eax
+ movl %eax, %cr0
+ lret
+SYM_FUNC_END(efi_enter32)
+
+ .data
+ .balign 8
+SYM_DATA_START(efi32_boot_gdt)
+ .word 0
+ .quad 0
+SYM_DATA_END(efi32_boot_gdt)
+
+SYM_DATA_START(efi32_boot_idt)
+ .word 0
+ .quad 0
+SYM_DATA_END(efi32_boot_idt)
+
+SYM_DATA_START(efi32_boot_cs)
+ .word 0
+SYM_DATA_END(efi32_boot_cs)
+
+SYM_DATA_START(efi32_boot_ds)
+ .word 0
+SYM_DATA_END(efi32_boot_ds)
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 2014, 2015 Intel Corporation; author Matt Fleming
- *
- * Early support for invoking 32-bit EFI services from a 64-bit kernel.
- *
- * Because this thunking occurs before ExitBootServices() we have to
- * restore the firmware's 32-bit GDT and IDT before we make EFI service
- * calls.
- *
- * On the plus side, we don't have to worry about mangling 64-bit
- * addresses into 32-bits because we're executing with an identity
- * mapped pagetable and haven't transitioned to 64-bit virtual addresses
- * yet.
- */
-
-#include <linux/linkage.h>
-#include <asm/msr.h>
-#include <asm/page_types.h>
-#include <asm/processor-flags.h>
-#include <asm/segment.h>
-
- .code64
- .text
-SYM_FUNC_START(__efi64_thunk)
- push %rbp
- push %rbx
-
- movl %ds, %eax
- push %rax
- movl %es, %eax
- push %rax
- movl %ss, %eax
- push %rax
-
- /* Copy args passed on stack */
- movq 0x30(%rsp), %rbp
- movq 0x38(%rsp), %rbx
- movq 0x40(%rsp), %rax
-
- /*
- * Convert x86-64 ABI params to i386 ABI
- */
- subq $64, %rsp
- movl %esi, 0x0(%rsp)
- movl %edx, 0x4(%rsp)
- movl %ecx, 0x8(%rsp)
- movl %r8d, 0xc(%rsp)
- movl %r9d, 0x10(%rsp)
- movl %ebp, 0x14(%rsp)
- movl %ebx, 0x18(%rsp)
- movl %eax, 0x1c(%rsp)
-
- leaq 0x20(%rsp), %rbx
- sgdt (%rbx)
-
- addq $16, %rbx
- sidt (%rbx)
-
- leaq 1f(%rip), %rbp
-
- /*
- * Switch to IDT and GDT with 32-bit segments. This is the firmware GDT
- * and IDT that was installed when the kernel started executing. The
- * pointers were saved at the EFI stub entry point in head_64.S.
- *
- * Pass the saved DS selector to the 32-bit code, and use far return to
- * restore the saved CS selector.
- */
- leaq efi32_boot_idt(%rip), %rax
- lidt (%rax)
- leaq efi32_boot_gdt(%rip), %rax
- lgdt (%rax)
-
- movzwl efi32_boot_ds(%rip), %edx
- movzwq efi32_boot_cs(%rip), %rax
- pushq %rax
- leaq efi_enter32(%rip), %rax
- pushq %rax
- lretq
-
-1: addq $64, %rsp
- movq %rdi, %rax
-
- pop %rbx
- movl %ebx, %ss
- pop %rbx
- movl %ebx, %es
- pop %rbx
- movl %ebx, %ds
- /* Clear out 32-bit selector from FS and GS */
- xorl %ebx, %ebx
- movl %ebx, %fs
- movl %ebx, %gs
-
- /*
- * Convert 32-bit status code into 64-bit.
- */
- roll $1, %eax
- rorq $1, %rax
-
- pop %rbx
- pop %rbp
- RET
-SYM_FUNC_END(__efi64_thunk)
-
- .code32
-/*
- * EFI service pointer must be in %edi.
- *
- * The stack should represent the 32-bit calling convention.
- */
-SYM_FUNC_START_LOCAL(efi_enter32)
- /* Load firmware selector into data and stack segment registers */
- movl %edx, %ds
- movl %edx, %es
- movl %edx, %fs
- movl %edx, %gs
- movl %edx, %ss
-
- /* Reload pgtables */
- movl %cr3, %eax
- movl %eax, %cr3
-
- /* Disable paging */
- movl %cr0, %eax
- btrl $X86_CR0_PG_BIT, %eax
- movl %eax, %cr0
-
- /* Disable long mode via EFER */
- movl $MSR_EFER, %ecx
- rdmsr
- btrl $_EFER_LME, %eax
- wrmsr
-
- call *%edi
-
- /* We must preserve return value */
- movl %eax, %edi
-
- /*
- * Some firmware will return with interrupts enabled. Be sure to
- * disable them before we switch GDTs and IDTs.
- */
- cli
-
- lidtl (%ebx)
- subl $16, %ebx
-
- lgdtl (%ebx)
-
- movl %cr4, %eax
- btsl $(X86_CR4_PAE_BIT), %eax
- movl %eax, %cr4
-
- movl %cr3, %eax
- movl %eax, %cr3
-
- movl $MSR_EFER, %ecx
- rdmsr
- btsl $_EFER_LME, %eax
- wrmsr
-
- xorl %eax, %eax
- lldt %ax
-
- pushl $__KERNEL_CS
- pushl %ebp
-
- /* Enable paging */
- movl %cr0, %eax
- btsl $X86_CR0_PG_BIT, %eax
- movl %eax, %cr0
- lret
-SYM_FUNC_END(efi_enter32)
-
- .data
- .balign 8
-SYM_DATA_START(efi32_boot_gdt)
- .word 0
- .quad 0
-SYM_DATA_END(efi32_boot_gdt)
-
-SYM_DATA_START(efi32_boot_idt)
- .word 0
- .quad 0
-SYM_DATA_END(efi32_boot_idt)
-
-SYM_DATA_START(efi32_boot_cs)
- .word 0
-SYM_DATA_END(efi32_boot_cs)
-
-SYM_DATA_START(efi32_boot_ds)
- .word 0
-SYM_DATA_END(efi32_boot_ds)
projects / people / aperard / linux.git / commitdiff