#include <asm/cpu-policy.h>
#include <asm/current.h>
#include <asm/debugreg.h>
+#include <asm/idt.h>
#include <asm/io.h>
#include <asm/mpspec.h>
#include <asm/msr.h>
#include <asm/atomic.h>
#include <asm/elf.h>
#include <asm/hpet.h>
+#include <asm/idt.h>
#include <asm/io_apic.h>
#include <asm/nmi.h>
#include <asm/shared.h>
#include <asm/hvm/svm/svm.h>
#include <asm/hvm/viridian.h>
#include <asm/i387.h>
+#include <asm/idt.h>
#include <asm/io.h>
#include <asm/ldt.h>
#include <asm/mc146818rtc.h>
#include <asm/cpufeature.h>
#include <asm/current.h>
#include <asm/debugreg.h>
+#include <asm/idt.h>
#include <asm/gdbsx.h>
#include <asm/hvm/emulate.h>
#include <asm/hvm/hvm.h>
#include <asm/apic.h>
#include <asm/cpufeature.h>
#include <asm/current.h>
+#include <asm/idt.h>
#include <asm/flushtlb.h>
#include <asm/hvm/hvm.h>
#include <asm/hvm/io.h>
};
} seg_desc_t;
-typedef union {
- struct {
- uint64_t a, b;
- };
- struct {
- uint16_t addr0;
- uint16_t cs;
- uint8_t ist; /* :3, 5 bits rsvd, but this yields far better code. */
- uint8_t type:4, s:1, dpl:2, p:1;
- uint16_t addr1;
- uint32_t addr2;
- /* 32 bits rsvd. */
- };
-} idt_entry_t;
-
-/* Write the lower 64 bits of an IDT Entry. This relies on the upper 32
- * bits of the address not changing, which is a safe assumption as all
- * functions we are likely to load will live inside the 1GB
- * code/data/bss address range.
- *
- * Ideally, we would use cmpxchg16b, but this is not supported on some
- * old AMD 64bit capable processors, and has no safe equivalent.
- */
-static inline void _write_gate_lower(volatile idt_entry_t *gate,
- const idt_entry_t *new)
-{
- ASSERT(gate->b == new->b);
- gate->a = new->a;
-}
-
-#define _set_gate(gate_addr,type,dpl,addr) \
-do { \
- (gate_addr)->a = 0; \
- smp_wmb(); /* disable gate /then/ rewrite */ \
- (gate_addr)->b = \
- ((unsigned long)(addr) >> 32); \
- smp_wmb(); /* rewrite /then/ enable gate */ \
- (gate_addr)->a = \
- (((unsigned long)(addr) & 0xFFFF0000UL) << 32) | \
- ((unsigned long)(dpl) << 45) | \
- ((unsigned long)(type) << 40) | \
- ((unsigned long)(addr) & 0xFFFFUL) | \
- ((unsigned long)__HYPERVISOR_CS << 16) | \
- (1UL << 47); \
-} while (0)
-
-static inline void _set_gate_lower(idt_entry_t *gate, unsigned long type,
- unsigned long dpl, void *addr)
-{
- idt_entry_t idte;
- idte.b = gate->b;
- idte.a =
- (((unsigned long)(addr) & 0xFFFF0000UL) << 32) |
- ((unsigned long)(dpl) << 45) |
- ((unsigned long)(type) << 40) |
- ((unsigned long)(addr) & 0xFFFFUL) |
- ((unsigned long)__HYPERVISOR_CS << 16) |
- (1UL << 47);
- _write_gate_lower(gate, &idte);
-}
-
-/* Update the lower half handler of an IDT Entry, without changing any
- * other configuration. */
-static inline void _update_gate_addr_lower(idt_entry_t *gate, void *addr)
-{
- idt_entry_t idte;
- idte.a = gate->a;
-
- idte.b = ((unsigned long)(addr) >> 32);
- idte.a &= 0x0000FFFFFFFF0000ULL;
- idte.a |= (((unsigned long)(addr) & 0xFFFF0000UL) << 32) |
- ((unsigned long)(addr) & 0xFFFFUL);
-
- _write_gate_lower(gate, &idte);
-}
-
#define _set_tssldt_desc(desc,addr,limit,type) \
do { \
(desc)[0].b = (desc)[1].b = 0; \
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef X86_ASM_IDT_H
+#define X86_ASM_IDT_H
+
+#include <xen/bug.h>
+#include <xen/types.h>
+
+#include <asm/x86-defns.h>
+
+#define IST_NONE 0
+#define IST_MCE 1
+#define IST_NMI 2
+#define IST_DB 3
+#define IST_DF 4
+#define IST_MAX 4
+
+typedef union {
+ struct {
+ uint64_t a, b;
+ };
+ struct {
+ uint16_t addr0;
+ uint16_t cs;
+ uint8_t ist; /* :3, 5 bits rsvd, but this yields far better code. */
+ uint8_t type:4, s:1, dpl:2, p:1;
+ uint16_t addr1;
+ uint32_t addr2;
+ /* 32 bits rsvd. */
+ };
+} idt_entry_t;
+
+#define IDT_ENTRIES 256
+extern idt_entry_t idt_table[];
+extern idt_entry_t *idt_tables[];
+
+/*
+ * Set the Interrupt Stack Table used by a particular IDT entry. Typically
+ * used on a live IDT, so volatile to disuade clever optimisations.
+ */
+static inline void set_ist(volatile idt_entry_t *idt, unsigned int ist)
+{
+ /* IST is a 3 bit field, 32 bits into the IDT entry. */
+ ASSERT(ist <= IST_MAX);
+
+ idt->ist = ist;
+}
+
+static inline void enable_each_ist(idt_entry_t *idt)
+{
+ set_ist(&idt[X86_EXC_DF], IST_DF);
+ set_ist(&idt[X86_EXC_NMI], IST_NMI);
+ set_ist(&idt[X86_EXC_MC], IST_MCE);
+ set_ist(&idt[X86_EXC_DB], IST_DB);
+}
+
+static inline void disable_each_ist(idt_entry_t *idt)
+{
+ set_ist(&idt[X86_EXC_DF], IST_NONE);
+ set_ist(&idt[X86_EXC_NMI], IST_NONE);
+ set_ist(&idt[X86_EXC_MC], IST_NONE);
+ set_ist(&idt[X86_EXC_DB], IST_NONE);
+}
+
+/*
+ * Write the lower 64 bits of an IDT Entry. This relies on the upper 32
+ * bits of the address not changing, which is a safe assumption as all
+ * functions we are likely to load will live inside the 1GB
+ * code/data/bss address range.
+ */
+static inline void _write_gate_lower(volatile idt_entry_t *gate,
+ const idt_entry_t *new)
+{
+ ASSERT(gate->b == new->b);
+ gate->a = new->a;
+}
+
+#define _set_gate(gate_addr,type,dpl,addr) \
+do { \
+ (gate_addr)->a = 0; \
+ smp_wmb(); /* disable gate /then/ rewrite */ \
+ (gate_addr)->b = \
+ ((unsigned long)(addr) >> 32); \
+ smp_wmb(); /* rewrite /then/ enable gate */ \
+ (gate_addr)->a = \
+ (((unsigned long)(addr) & 0xFFFF0000UL) << 32) | \
+ ((unsigned long)(dpl) << 45) | \
+ ((unsigned long)(type) << 40) | \
+ ((unsigned long)(addr) & 0xFFFFUL) | \
+ ((unsigned long)__HYPERVISOR_CS << 16) | \
+ (1UL << 47); \
+} while (0)
+
+static inline void _set_gate_lower(idt_entry_t *gate, unsigned long type,
+ unsigned long dpl, void *addr)
+{
+ idt_entry_t idte;
+ idte.b = gate->b;
+ idte.a =
+ (((unsigned long)(addr) & 0xFFFF0000UL) << 32) |
+ ((unsigned long)(dpl) << 45) |
+ ((unsigned long)(type) << 40) |
+ ((unsigned long)(addr) & 0xFFFFUL) |
+ ((unsigned long)__HYPERVISOR_CS << 16) |
+ (1UL << 47);
+ _write_gate_lower(gate, &idte);
+}
+
+/*
+ * Update the lower half handler of an IDT entry, without changing any other
+ * configuration.
+ */
+static inline void _update_gate_addr_lower(idt_entry_t *gate, void *addr)
+{
+ idt_entry_t idte;
+ idte.a = gate->a;
+
+ idte.b = ((unsigned long)(addr) >> 32);
+ idte.a &= 0x0000FFFFFFFF0000ULL;
+ idte.a |= (((unsigned long)(addr) & 0xFFFF0000UL) << 32) |
+ ((unsigned long)(addr) & 0xFFFFUL);
+
+ _write_gate_lower(gate, &idte);
+}
+
+#endif /* X86_ASM_IDT_H */
};
DECLARE_PER_CPU(struct tss_page, tss_page);
-#define IST_NONE 0UL
-#define IST_MCE 1UL
-#define IST_NMI 2UL
-#define IST_DB 3UL
-#define IST_DF 4UL
-#define IST_MAX 4UL
-
-/* Set the Interrupt Stack Table used by a particular IDT entry. */
-static inline void set_ist(idt_entry_t *idt, unsigned int ist)
-{
- /* IST is a 3 bit field, 32 bits into the IDT entry. */
- ASSERT(ist <= IST_MAX);
-
- /* Typically used on a live idt. Disuade any clever optimisations. */
- ACCESS_ONCE(idt->ist) = ist;
-}
-
-static inline void enable_each_ist(idt_entry_t *idt)
-{
- set_ist(&idt[X86_EXC_DF], IST_DF);
- set_ist(&idt[X86_EXC_NMI], IST_NMI);
- set_ist(&idt[X86_EXC_MC], IST_MCE);
- set_ist(&idt[X86_EXC_DB], IST_DB);
-}
-
-static inline void disable_each_ist(idt_entry_t *idt)
-{
- set_ist(&idt[X86_EXC_DF], IST_NONE);
- set_ist(&idt[X86_EXC_NMI], IST_NONE);
- set_ist(&idt[X86_EXC_MC], IST_NONE);
- set_ist(&idt[X86_EXC_DB], IST_NONE);
-}
-
-#define IDT_ENTRIES 256
-extern idt_entry_t idt_table[];
-extern idt_entry_t *idt_tables[];
-
DECLARE_PER_CPU(root_pgentry_t *, root_pgt);
extern void write_ptbase(struct vcpu *v);
#include <asm/fixmap.h>
#include <asm/hpet.h>
+#include <asm/idt.h>
#include <asm/machine_kexec.h>
#include <asm/page.h>
#include <asm/fixmap.h>
#include <asm/flushtlb.h>
#include <asm/guest.h>
+#include <asm/idt.h>
#include <asm/io.h>
#include <asm/io_apic.h>
#include <asm/ldt.h>
* using different PATs will not work.
*/
BUILD_BUG_ON(XEN_MSR_PAT != 0x050100070406ULL);
+
+ /* IST_MAX IST pages + at least 1 guard page + primary stack. */
+ BUILD_BUG_ON((IST_MAX + 1) * PAGE_SIZE + PRIMARY_STACK_SIZE > STACK_SIZE);
}
/*
#include <xen/softirq.h>
#include <asm/debugreg.h>
+#include <asm/idt.h>
#include <asm/irq-vectors.h>
#include <asm/pv/trace.h>
#include <asm/shared.h>
#include <asm/div64.h>
#include <asm/flushtlb.h>
#include <asm/guest.h>
+#include <asm/idt.h>
#include <asm/io_apic.h>
#include <asm/irq-vectors.h>
#include <asm/mc146818rtc.h>
#include <asm/hpet.h>
#include <asm/hvm/vpt.h>
#include <asm/i387.h>
+#include <asm/idt.h>
#include <asm/io.h>
#include <asm/irq-vectors.h>
#include <asm/mc146818rtc.h>
unsigned char *stub_page;
unsigned int offset;
- /* IST_MAX IST pages + at least 1 guard page + primary stack. */
- BUILD_BUG_ON((IST_MAX + 1) * PAGE_SIZE + PRIMARY_STACK_SIZE > STACK_SIZE);
-
/* No PV guests? No need to set up SYSCALL/SYSENTER infrastructure. */
if ( !IS_ENABLED(CONFIG_PV) )
return;