dt-bindings: net: dp83822: change ti,rmii-mode description

Drop reference to the 25MHz clock as it has nothing to do with connecting
the PHY and the MAC.
Add info about the reference clock direction between the PHY and the MAC
as it depends on the selected rmii mode.

Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jérémie Dautheribes <jeremie.dautheribes@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240305141309.127669-1-jeremie.dautheribes@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

diff --git a/Documentation/devicetree/bindings/net/ti,dp83822.yaml b/Documentation/devicetree/bindings/net/ti,dp83822.yaml
index 8f23254c0458f7d2562336224810814b7de5d9a8..784866ea392b2083e93d8dc9aaea93b70dc80934 100644 (file)
--- a/Documentation/devicetree/bindings/net/ti,dp83822.yaml
+++ b/Documentation/devicetree/bindings/net/ti,dp83822.yaml
@@ -84,10 +84,10 @@ properties:
     description: |
        If present, select the RMII operation mode. Two modes are
        available:
-         - RMII master, where the PHY operates from a 25MHz clock reference,
-         provided by a crystal or a CMOS-level oscillator
-         - RMII slave, where the PHY operates from a 50MHz clock reference,
-         provided by a CMOS-level oscillator
+         - RMII master, where the PHY outputs a 50MHz reference clock which can
+         be connected to the MAC.
+         - RMII slave, where the PHY expects a 50MHz reference clock input
+         shared with the MAC.
        The RMII operation mode can also be configured by its straps.
        If the strap pin is not set correctly or not set at all, then this can be
        used to configure it.