qemu-iotests: filter QEMU monitor \r\n

SMTP does not preserve newlines.  This is normally not a problem if the
email body uses DOS or UNIX newlines consistently.  In 051.out we mix
UNIX newlines with DOS newlines (since QEMU monitor output uses \r\n).

This patch filters the QEMU monitor output so the golden master file
uses UNIX newlines exclusively.

The result is that patches touching 051.out will apply cleanly without
mangling newlines after this commit.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

diff --git a/tests/qemu-iotests/051.out b/tests/qemu-iotests/051.out
index ddef87cb188a0584f319f5e45e7ed60373cab69b..49e95a20cf3c4447c0f6dfb920bc41566f9c81a8 100644 (file)
--- a/tests/qemu-iotests/051.out
+++ b/tests/qemu-iotests/051.out
@@ -39,12 +39,12 @@ ide0-hd0: TEST_DIR/t.qcow2 (qcow2)
 === Enable and disable lazy refcounting on the command line, plus some invalid values ===
 
 Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on
-QEMU X.Y.Z monitor - type 'help' for more information\r
-(qemu) q\e[K\e[Dqu\e[K\e[D\e[Dqui\e[K\e[D\e[D\e[Dquit\e[K\r
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) q\e[K\e[Dqu\e[K\e[D\e[Dqui\e[K\e[D\e[D\e[Dquit\e[K
 
 Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=off
-QEMU X.Y.Z monitor - type 'help' for more information\r
-(qemu) q\e[K\e[Dqu\e[K\e[D\e[Dqui\e[K\e[D\e[D\e[Dquit\e[K\r
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) q\e[K\e[Dqu\e[K\e[D\e[Dqui\e[K\e[D\e[D\e[Dquit\e[K
 
 Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=
 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=: could not open disk image TEST_DIR/t.qcow2: Parameter 'lazy-refcounts' expects 'on' or 'off'
@@ -63,71 +63,71 @@ Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on
 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on: could not open disk image TEST_DIR/t.qcow2: Lazy refcounts require a qcow2 image with at least qemu 1.1 compatibility level
 
 Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=off
-QEMU X.Y.Z monitor - type 'help' for more information\r
-(qemu) q\e[K\e[Dqu\e[K\e[D\e[Dqui\e[K\e[D\e[D\e[Dquit\e[K\r
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) q\e[K\e[Dqu\e[K\e[D\e[Dqui\e[K\e[D\e[D\e[Dquit\e[K
 
 
 === No medium ===
 
 Testing: -drive if=floppy
-QEMU X.Y.Z monitor - type 'help' for more information\r
-(qemu) q\e[K\e[Dqu\e[K\e[D\e[Dqui\e[K\e[D\e[D\e[Dquit\e[K\r
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) q\e[K\e[Dqu\e[K\e[D\e[Dqui\e[K\e[D\e[D\e[Dquit\e[K
 
 Testing: -drive if=ide,media=cdrom
-QEMU X.Y.Z monitor - type 'help' for more information\r
-(qemu) q\e[K\e[Dqu\e[K\e[D\e[Dqui\e[K\e[D\e[D\e[Dquit\e[K\r
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) q\e[K\e[Dqu\e[K\e[D\e[Dqui\e[K\e[D\e[D\e[Dquit\e[K
 
 Testing: -drive if=scsi,media=cdrom
-QEMU X.Y.Z monitor - type 'help' for more information\r
-(qemu) q\e[K\e[Dqu\e[K\e[D\e[Dqui\e[K\e[D\e[D\e[Dquit\e[K\r
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) q\e[K\e[Dqu\e[K\e[D\e[Dqui\e[K\e[D\e[D\e[Dquit\e[K
 
 Testing: -drive if=ide
-QEMU X.Y.Z monitor - type 'help' for more information\r
+QEMU X.Y.Z monitor - type 'help' for more information
 (qemu) QEMU_PROG: Device needs media, but drive is empty
 QEMU_PROG: Device initialization failed.
 QEMU_PROG: Initialization of device ide-hd failed
 
 Testing: -drive if=virtio
-QEMU X.Y.Z monitor - type 'help' for more information\r
+QEMU X.Y.Z monitor - type 'help' for more information
 (qemu) QEMU_PROG: -drive if=virtio: Device needs media, but drive is empty
 QEMU_PROG: -drive if=virtio: Device initialization failed.
 QEMU_PROG: -drive if=virtio: Device initialization failed.
 QEMU_PROG: -drive if=virtio: Device 'virtio-blk-pci' could not be initialized
 
 Testing: -drive if=scsi
-QEMU X.Y.Z monitor - type 'help' for more information\r
+QEMU X.Y.Z monitor - type 'help' for more information
 (qemu) QEMU_PROG: -drive if=scsi: Device needs media, but drive is empty
 QEMU_PROG: Device initialization failed.
 QEMU_PROG: Initialization of device lsi53c895a failed
 
 Testing: -drive if=none,id=disk -device ide-cd,drive=disk
-QEMU X.Y.Z monitor - type 'help' for more information\r
-(qemu) q\e[K\e[Dqu\e[K\e[D\e[Dqui\e[K\e[D\e[D\e[Dquit\e[K\r
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) q\e[K\e[Dqu\e[K\e[D\e[Dqui\e[K\e[D\e[D\e[Dquit\e[K
 
 Testing: -drive if=none,id=disk -device lsi53c895a -device scsi-cd,drive=disk
-QEMU X.Y.Z monitor - type 'help' for more information\r
-(qemu) q\e[K\e[Dqu\e[K\e[D\e[Dqui\e[K\e[D\e[D\e[Dquit\e[K\r
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) q\e[K\e[Dqu\e[K\e[D\e[Dqui\e[K\e[D\e[D\e[Dquit\e[K
 
 Testing: -drive if=none,id=disk -device ide-drive,drive=disk
-QEMU X.Y.Z monitor - type 'help' for more information\r
+QEMU X.Y.Z monitor - type 'help' for more information
 (qemu) QEMU_PROG: -device ide-drive,drive=disk: Device needs media, but drive is empty
 QEMU_PROG: -device ide-drive,drive=disk: Device initialization failed.
 QEMU_PROG: -device ide-drive,drive=disk: Device 'ide-drive' could not be initialized
 
 Testing: -drive if=none,id=disk -device ide-hd,drive=disk
-QEMU X.Y.Z monitor - type 'help' for more information\r
+QEMU X.Y.Z monitor - type 'help' for more information
 (qemu) QEMU_PROG: -device ide-hd,drive=disk: Device needs media, but drive is empty
 QEMU_PROG: -device ide-hd,drive=disk: Device initialization failed.
 QEMU_PROG: -device ide-hd,drive=disk: Device 'ide-hd' could not be initialized
 
 Testing: -drive if=none,id=disk -device lsi53c895a -device scsi-disk,drive=disk
-QEMU X.Y.Z monitor - type 'help' for more information\r
+QEMU X.Y.Z monitor - type 'help' for more information
 (qemu) QEMU_PROG: -device scsi-disk,drive=disk: Device needs media, but drive is empty
 QEMU_PROG: -device scsi-disk,drive=disk: Device initialization failed.
 QEMU_PROG: -device scsi-disk,drive=disk: Device 'scsi-disk' could not be initialized
 
 Testing: -drive if=none,id=disk -device lsi53c895a -device scsi-hd,drive=disk
-QEMU X.Y.Z monitor - type 'help' for more information\r
+QEMU X.Y.Z monitor - type 'help' for more information
 (qemu) QEMU_PROG: -device scsi-hd,drive=disk: Device needs media, but drive is empty
 QEMU_PROG: -device scsi-hd,drive=disk: Device initialization failed.
 QEMU_PROG: -device scsi-hd,drive=disk: Device 'scsi-hd' could not be initialized
@@ -136,81 +136,81 @@ QEMU_PROG: -device scsi-hd,drive=disk: Device 'scsi-hd' could not be initialized
 === Read-only ===
 
 Testing: -drive file=TEST_DIR/t.qcow2,if=floppy,readonly=on
-QEMU X.Y.Z monitor - type 'help' for more information\r
-(qemu) q\e[K\e[Dqu\e[K\e[D\e[Dqui\e[K\e[D\e[D\e[Dquit\e[K\r
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) q\e[K\e[Dqu\e[K\e[D\e[Dqui\e[K\e[D\e[D\e[Dquit\e[K
 
 Testing: -drive file=TEST_DIR/t.qcow2,if=ide,media=cdrom,readonly=on
-QEMU X.Y.Z monitor - type 'help' for more information\r
-(qemu) q\e[K\e[Dqu\e[K\e[D\e[Dqui\e[K\e[D\e[D\e[Dquit\e[K\r
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) q\e[K\e[Dqu\e[K\e[D\e[Dqui\e[K\e[D\e[D\e[Dquit\e[K
 
 Testing: -drive file=TEST_DIR/t.qcow2,if=scsi,media=cdrom,readonly=on
-QEMU X.Y.Z monitor - type 'help' for more information\r
-(qemu) q\e[K\e[Dqu\e[K\e[D\e[Dqui\e[K\e[D\e[D\e[Dquit\e[K\r
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) q\e[K\e[Dqu\e[K\e[D\e[Dqui\e[K\e[D\e[D\e[Dquit\e[K
 
 Testing: -drive file=TEST_DIR/t.qcow2,if=ide,readonly=on
-QEMU X.Y.Z monitor - type 'help' for more information\r
+QEMU X.Y.Z monitor - type 'help' for more information
 (qemu) QEMU_PROG: Can't use a read-only drive
 QEMU_PROG: Device initialization failed.
 QEMU_PROG: Initialization of device ide-hd failed
 
 Testing: -drive file=TEST_DIR/t.qcow2,if=virtio,readonly=on
-QEMU X.Y.Z monitor - type 'help' for more information\r
-(qemu) q\e[K\e[Dqu\e[K\e[D\e[Dqui\e[K\e[D\e[D\e[Dquit\e[K\r
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) q\e[K\e[Dqu\e[K\e[D\e[Dqui\e[K\e[D\e[D\e[Dquit\e[K
 
 Testing: -drive file=TEST_DIR/t.qcow2,if=scsi,readonly=on
-QEMU X.Y.Z monitor - type 'help' for more information\r
-(qemu) q\e[K\e[Dqu\e[K\e[D\e[Dqui\e[K\e[D\e[D\e[Dquit\e[K\r
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) q\e[K\e[Dqu\e[K\e[D\e[Dqui\e[K\e[D\e[D\e[Dquit\e[K
 
 Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device ide-cd,drive=disk
-QEMU X.Y.Z monitor - type 'help' for more information\r
-(qemu) q\e[K\e[Dqu\e[K\e[D\e[Dqui\e[K\e[D\e[D\e[Dquit\e[K\r
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) q\e[K\e[Dqu\e[K\e[D\e[Dqui\e[K\e[D\e[D\e[Dquit\e[K
 
 Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device lsi53c895a -device scsi-cd,drive=disk
-QEMU X.Y.Z monitor - type 'help' for more information\r
-(qemu) q\e[K\e[Dqu\e[K\e[D\e[Dqui\e[K\e[D\e[D\e[Dquit\e[K\r
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) q\e[K\e[Dqu\e[K\e[D\e[Dqui\e[K\e[D\e[D\e[Dquit\e[K
 
 Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device ide-drive,drive=disk
-QEMU X.Y.Z monitor - type 'help' for more information\r
+QEMU X.Y.Z monitor - type 'help' for more information
 (qemu) QEMU_PROG: -device ide-drive,drive=disk: Can't use a read-only drive
 QEMU_PROG: -device ide-drive,drive=disk: Device initialization failed.
 QEMU_PROG: -device ide-drive,drive=disk: Device 'ide-drive' could not be initialized
 
 Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device ide-hd,drive=disk
-QEMU X.Y.Z monitor - type 'help' for more information\r
+QEMU X.Y.Z monitor - type 'help' for more information
 (qemu) QEMU_PROG: -device ide-hd,drive=disk: Can't use a read-only drive
 QEMU_PROG: -device ide-hd,drive=disk: Device initialization failed.
 QEMU_PROG: -device ide-hd,drive=disk: Device 'ide-hd' could not be initialized
 
 Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device lsi53c895a -device scsi-disk,drive=disk
-QEMU X.Y.Z monitor - type 'help' for more information\r
-(qemu) q\e[K\e[Dqu\e[K\e[D\e[Dqui\e[K\e[D\e[D\e[Dquit\e[K\r
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) q\e[K\e[Dqu\e[K\e[D\e[Dqui\e[K\e[D\e[D\e[Dquit\e[K
 
 Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device lsi53c895a -device scsi-hd,drive=disk
-QEMU X.Y.Z monitor - type 'help' for more information\r
-(qemu) q\e[K\e[Dqu\e[K\e[D\e[Dqui\e[K\e[D\e[D\e[Dquit\e[K\r
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) q\e[K\e[Dqu\e[K\e[D\e[Dqui\e[K\e[D\e[D\e[Dquit\e[K
 
 
 === Cache modes ===
 
 Testing: -drive media=cdrom,cache=none
-QEMU X.Y.Z monitor - type 'help' for more information\r
-(qemu) q\e[K\e[Dqu\e[K\e[D\e[Dqui\e[K\e[D\e[D\e[Dquit\e[K\r
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) q\e[K\e[Dqu\e[K\e[D\e[Dqui\e[K\e[D\e[D\e[Dquit\e[K
 
 Testing: -drive media=cdrom,cache=directsync
-QEMU X.Y.Z monitor - type 'help' for more information\r
-(qemu) q\e[K\e[Dqu\e[K\e[D\e[Dqui\e[K\e[D\e[D\e[Dquit\e[K\r
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) q\e[K\e[Dqu\e[K\e[D\e[Dqui\e[K\e[D\e[D\e[Dquit\e[K
 
 Testing: -drive media=cdrom,cache=writeback
-QEMU X.Y.Z monitor - type 'help' for more information\r
-(qemu) q\e[K\e[Dqu\e[K\e[D\e[Dqui\e[K\e[D\e[D\e[Dquit\e[K\r
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) q\e[K\e[Dqu\e[K\e[D\e[Dqui\e[K\e[D\e[D\e[Dquit\e[K
 
 Testing: -drive media=cdrom,cache=writethrough
-QEMU X.Y.Z monitor - type 'help' for more information\r
-(qemu) q\e[K\e[Dqu\e[K\e[D\e[Dqui\e[K\e[D\e[D\e[Dquit\e[K\r
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) q\e[K\e[Dqu\e[K\e[D\e[Dqui\e[K\e[D\e[D\e[Dquit\e[K
 
 Testing: -drive media=cdrom,cache=unsafe
-QEMU X.Y.Z monitor - type 'help' for more information\r
-(qemu) q\e[K\e[Dqu\e[K\e[D\e[Dqui\e[K\e[D\e[D\e[Dquit\e[K\r
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) q\e[K\e[Dqu\e[K\e[D\e[Dqui\e[K\e[D\e[D\e[Dquit\e[K
 
 Testing: -drive media=cdrom,cache=invalid_value
 QEMU_PROG: -drive media=cdrom,cache=invalid_value: invalid cache option
@@ -219,8 +219,8 @@ QEMU_PROG: -drive media=cdrom,cache=invalid_value: invalid cache option
 === Specifying the protocol layer ===
 
 Testing: -drive file=TEST_DIR/t.qcow2,file.driver=file
-QEMU X.Y.Z monitor - type 'help' for more information\r
-(qemu) q\e[K\e[Dqu\e[K\e[D\e[Dqui\e[K\e[D\e[D\e[Dquit\e[K\r
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) q\e[K\e[Dqu\e[K\e[D\e[Dqui\e[K\e[D\e[D\e[Dquit\e[K
 
 Testing: -drive file=TEST_DIR/t.qcow2,file.driver=qcow2
 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,file.driver=qcow2: could not open disk image TEST_DIR/t.qcow2: Can't use 'qcow2' as a block driver for the protocol level

diff --git a/tests/qemu-iotests/common.filter b/tests/qemu-iotests/common.filter
index 9c82c77a81703143823f9f5a63b2658480c33c8d..776985d15e0e4f496a1b95919afac1f23cf3a300 100644 (file)
--- a/tests/qemu-iotests/common.filter
+++ b/tests/qemu-iotests/common.filter
@@ -157,7 +157,8 @@ _filter_qemu_io()
 _filter_qemu()
 {
     sed -e "s#\\(^\\|(qemu) \\)$(basename $QEMU_PROG):#\1QEMU_PROG:#" \
-        -e 's#^QEMU [0-9]\+\.[0-9]\+\.[0-9]\+ monitor#QEMU X.Y.Z monitor#'
+        -e 's#^QEMU [0-9]\+\.[0-9]\+\.[0-9]\+ monitor#QEMU X.Y.Z monitor#' \
+        -e $'s#\r##' # QEMU monitor uses \r\n line endings
 }
 
 # replace problematic QMP output like timestamps