start condition. */
if (sc->event) {
- trace_i2c_event("start", s->address);
+ trace_i2c_event(event == I2C_START_SEND ? "start" : "start_async",
+ s->address);
rv = sc->event(s, event);
if (rv && !bus->broadcast) {
if (bus_scanned) {
return i2c_do_start_transfer(bus, address, I2C_START_SEND);
}
+int i2c_start_send_async(I2CBus *bus, uint8_t address)
+{
+ return i2c_do_start_transfer(bus, address, I2C_START_SEND_ASYNC);
+}
+
void i2c_end_transfer(I2CBus *bus)
{
I2CSlaveClass *sc;
return ret ? -1 : 0;
}
+int i2c_send_async(I2CBus *bus, uint8_t data)
+{
+ I2CNode *node = QLIST_FIRST(&bus->current_devs);
+ I2CSlave *slave = node->elt;
+ I2CSlaveClass *sc = I2C_SLAVE_GET_CLASS(slave);
+
+ if (!sc->send_async) {
+ return -1;
+ }
+
+ trace_i2c_send_async(slave->address, data);
+
+ sc->send_async(slave, data);
+
+ return 0;
+}
+
uint8_t i2c_recv(I2CBus *bus)
{
uint8_t data = 0xff;
}
}
+void i2c_ack(I2CBus *bus)
+{
+ if (!bus->bh) {
+ return;
+ }
+
+ trace_i2c_ack();
+
+ qemu_bh_schedule(bus->bh);
+}
+
static int i2c_slave_post_load(void *opaque, int version_id)
{
I2CSlave *dev = opaque;
i2c_event(const char *event, uint8_t address) "%s(addr:0x%02x)"
i2c_send(uint8_t address, uint8_t data) "send(addr:0x%02x) data:0x%02x"
+i2c_send_async(uint8_t address, uint8_t data) "send_async(addr:0x%02x) data:0x%02x"
i2c_recv(uint8_t address, uint8_t data) "recv(addr:0x%02x) data:0x%02x"
+i2c_ack(void) ""
# aspeed_i2c.c
enum i2c_event {
I2C_START_RECV,
I2C_START_SEND,
+ I2C_START_SEND_ASYNC,
I2C_FINISH,
I2C_NACK /* Masker NACKed a receive byte. */
};
/* Master to slave. Returns non-zero for a NAK, 0 for success. */
int (*send)(I2CSlave *s, uint8_t data);
+ /* Master to slave (asynchronous). Receiving slave must call i2c_ack(). */
+ void (*send_async)(I2CSlave *s, uint8_t data);
+
/*
* Slave to master. This cannot fail, the device should always
* return something here.
*/
int i2c_start_send(I2CBus *bus, uint8_t address);
+/**
+ * i2c_start_send_async: start an asynchronous 'send' transfer on an I2C bus.
+ *
+ * @bus: #I2CBus to be used
+ * @address: address of the slave
+ *
+ * Return: 0 on success, -1 on error
+ */
+int i2c_start_send_async(I2CBus *bus, uint8_t address);
+
void i2c_end_transfer(I2CBus *bus);
void i2c_nack(I2CBus *bus);
+void i2c_ack(I2CBus *bus);
void i2c_bus_master(I2CBus *bus, QEMUBH *bh);
void i2c_bus_release(I2CBus *bus);
int i2c_send(I2CBus *bus, uint8_t data);
+int i2c_send_async(I2CBus *bus, uint8_t data);
uint8_t i2c_recv(I2CBus *bus);
bool i2c_scan_bus(I2CBus *bus, uint8_t address, bool broadcast,
I2CNodeList *current_devs);