]> xenbits.xensource.com Git - xen.git/commitdiff
ns16550: make some initialisation common
authorIan Campbell <ian.campbell@citrix.com>
Wed, 26 Mar 2014 11:55:55 +0000 (11:55 +0000)
committerIan Campbell <ian.campbell@citrix.com>
Wed, 2 Apr 2014 13:08:25 +0000 (14:08 +0100)
Should avoid accidents like forgetting to init lsr_mask for DT devices in the
future.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Keir Fraser <keir@xen.org>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
xen/drivers/char/ns16550.c

index 2dd32b21f48e9281c0516056492b0e73b22ccbe4..44e13b722e6a59db4fadbd4b3e8157112f846263 100644 (file)
@@ -1076,6 +1076,21 @@ static void __init ns16550_parse_port_config(
     serial_register_uart(uart - ns16550_com, &ns16550_driver, uart);
 }
 
+static void ns16550_init_common(struct ns16550 *uart)
+{
+    uart->clock_hz  = UART_CLOCK_HZ;
+
+#ifdef HAS_PCI
+    uart->enable_ro = 0;
+#endif
+
+    /* Default is no transmit FIFO. */
+    uart->fifo_size = 1;
+
+    /* Default lsr_mask = UART_LSR_THRE */
+    uart->lsr_mask  = UART_LSR_THRE;
+}
+
 void __init ns16550_init(int index, struct ns16550_defaults *defaults)
 {
     struct ns16550 *uart;
@@ -1085,10 +1100,11 @@ void __init ns16550_init(int index, struct ns16550_defaults *defaults)
 
     uart = &ns16550_com[index];
 
+    ns16550_init_common(uart);
+
     uart->baud      = (defaults->baud ? :
                        console_has((index == 0) ? "com1" : "com2")
                        ? BAUD_AUTO : 0);
-    uart->clock_hz  = UART_CLOCK_HZ;
     uart->data_bits = defaults->data_bits;
     uart->parity    = parse_parity_char(defaults->parity);
     uart->stop_bits = defaults->stop_bits;
@@ -1098,16 +1114,6 @@ void __init ns16550_init(int index, struct ns16550_defaults *defaults)
     uart->reg_width = 1;
     uart->reg_shift = 0;
 
-#ifdef HAS_PCI
-    uart->enable_ro = 0;
-#endif
-
-    /* Default is no transmit FIFO. */
-    uart->fifo_size = 1;
-
-    /* Default lsr_mask = UART_LSR_THRE */
-    uart->lsr_mask = UART_LSR_THRE;
-
     ns16550_parse_port_config(uart, (index == 0) ? opt_com1 : opt_com2);
 }
 
@@ -1122,15 +1128,12 @@ static int __init ns16550_uart_dt_init(struct dt_device_node *dev,
 
     uart = &ns16550_com[0];
 
+    ns16550_init_common(uart);
+
     uart->baud      = BAUD_AUTO;
-    uart->clock_hz  = UART_CLOCK_HZ;
     uart->data_bits = 8;
     uart->parity    = UART_PARITY_NONE;
     uart->stop_bits = 1;
-    /* Default is no transmit FIFO. */
-    uart->fifo_size = 1;
-    /* Default lsr_mask = UART_LSR_THRE */
-    uart->lsr_mask = UART_LSR_THRE;
 
     res = dt_device_get_address(dev, 0, &uart->io_base, &io_size);
     if ( res )