--- /dev/null
+// (qemu-emulated) lsi53c895a boot support.
+//
+// Copyright (C) 2012 Red Hat Inc.
+//
+// Authors:
+// Gerd Hoffmann <kraxel@redhat.com>
+//
+// based on virtio-scsi.c which is written by:
+// Paolo Bonzini <pbonzini@redhat.com>
+//
+// This file may be distributed under the terms of the GNU LGPLv3 license.
+
+#include "util.h" // dprintf
+#include "pci.h" // foreachpci
+#include "config.h" // CONFIG_*
+#include "biosvar.h" // GET_GLOBAL
+#include "pci_ids.h" // PCI_DEVICE_ID_VIRTIO_BLK
+#include "pci_regs.h" // PCI_VENDOR_ID
+#include "boot.h" // bootprio_find_scsi_device
+#include "blockcmd.h" // scsi_init_drive
+#include "disk.h"
+
+#define LSI_REG_DSTAT 0x0c
+#define LSI_REG_ISTAT0 0x14
+#define LSI_REG_DSP0 0x2c
+#define LSI_REG_DSP1 0x2d
+#define LSI_REG_DSP2 0x2e
+#define LSI_REG_DSP3 0x2f
+#define LSI_REG_SIST0 0x42
+#define LSI_REG_SIST1 0x43
+
+#define LSI_ISTAT0_DIP 0x01
+#define LSI_ISTAT0_SIP 0x02
+#define LSI_ISTAT0_INTF 0x04
+#define LSI_ISTAT0_CON 0x08
+#define LSI_ISTAT0_SEM 0x10
+#define LSI_ISTAT0_SIGP 0x20
+#define LSI_ISTAT0_SRST 0x40
+#define LSI_ISTAT0_ABRT 0x80
+
+struct lsi_lun_s {
+ struct drive_s drive;
+ struct pci_device *pci;
+ u32 iobase;
+ u8 target;
+ u8 lun;
+};
+
+static int
+lsi_scsi_cmd(struct lsi_lun_s *llun, struct disk_op_s *op,
+ void *cdbcmd, u16 target, u16 lun, u16 blocksize)
+{
+ u32 iobase = GET_GLOBAL(llun->iobase);
+ u32 dma = ((cdb_is_read(cdbcmd, blocksize) ? 0x01000000 : 0x00000000) |
+ (op->count * blocksize));
+ u8 msgout[] = {
+ 0x80 | lun, // select lun
+ 0x08,
+ };
+ u8 status = 0xff;
+ u8 msgin_tmp[2];
+ u8 msgin = 0xff;
+
+ u32 script[] = {
+ /* select target, send scsi command */
+ 0x40000000 | target << 16, // select target
+ 0x00000000,
+ 0x06000001, // msgout
+ (u32)MAKE_FLATPTR(GET_SEG(SS), &msgout),
+ 0x02000010, // scsi command
+ (u32)MAKE_FLATPTR(GET_SEG(SS), cdbcmd),
+
+ /* handle disconnect */
+ 0x87820000, // phase == msgin ?
+ 0x00000018,
+ 0x07000002, // msgin
+ (u32)MAKE_FLATPTR(GET_SEG(SS), &msgin_tmp),
+ 0x50000000, // re-select
+ 0x00000000,
+ 0x07000002, // msgin
+ (u32)MAKE_FLATPTR(GET_SEG(SS), &msgin_tmp),
+
+ /* dma data, get status, raise irq */
+ dma, // dma data
+ (u32)op->buf_fl,
+ 0x03000001, // status
+ (u32)MAKE_FLATPTR(GET_SEG(SS), &status),
+ 0x07000001, // msgin
+ (u32)MAKE_FLATPTR(GET_SEG(SS), &msgin),
+ 0x98080000, // dma irq
+ 0x00000000,
+ };
+ u32 dsp = (u32)MAKE_FLATPTR(GET_SEG(SS), &script);
+
+ outb(dsp & 0xff, iobase + LSI_REG_DSP0);
+ outb((dsp >> 8) & 0xff, iobase + LSI_REG_DSP1);
+ outb((dsp >> 16) & 0xff, iobase + LSI_REG_DSP2);
+ outb((dsp >> 24) & 0xff, iobase + LSI_REG_DSP3);
+
+ for (;;) {
+ u8 dstat = inb(iobase + LSI_REG_DSTAT);
+ u8 sist0 = inb(iobase + LSI_REG_SIST0);
+ u8 sist1 = inb(iobase + LSI_REG_SIST1);
+ if (sist0 || sist1) {
+ goto fail;
+ }
+ if (dstat & 0x04) {
+ break;
+ }
+ usleep(5);
+ }
+
+ if (msgin == 0 && status == 0) {
+ return DISK_RET_SUCCESS;
+ }
+
+fail:
+ // sledge hammer to get back into a known-good state: hba reset
+ outb(LSI_ISTAT0_SRST, iobase + LSI_REG_ISTAT0);
+ return DISK_RET_EBADTRACK;
+}
+
+int
+lsi_scsi_cmd_data(struct disk_op_s *op, void *cdbcmd, u16 blocksize)
+{
+ if (!CONFIG_LSI_SCSI)
+ return DISK_RET_EBADTRACK;
+
+ struct lsi_lun_s *llun =
+ container_of(op->drive_g, struct lsi_lun_s, drive);
+
+ return lsi_scsi_cmd(llun, op, cdbcmd,
+ GET_GLOBAL(llun->target), GET_GLOBAL(llun->lun),
+ blocksize);
+}
+
+static int
+lsi_scsi_add_lun(struct pci_device *pci, u32 iobase, u8 target, u8 lun)
+{
+ struct lsi_lun_s *llun = malloc_fseg(sizeof(*llun));
+ if (!llun) {
+ warn_noalloc();
+ return -1;
+ }
+ memset(llun, 0, sizeof(*llun));
+ llun->drive.type = DTYPE_LSI_SCSI;
+ llun->drive.cntl_id = pci->bdf;
+ llun->pci = pci;
+ llun->target = target;
+ llun->lun = lun;
+ llun->iobase = iobase;
+
+ char *name = znprintf(16, "lsi %02x:%02x.%x %d:%d",
+ pci_bdf_to_bus(pci->bdf), pci_bdf_to_dev(pci->bdf),
+ pci_bdf_to_fn(pci->bdf), target, lun);
+ int prio = bootprio_find_scsi_device(pci, target, lun);
+ int ret = scsi_init_drive(&llun->drive, name, prio);
+ free(name);
+ if (ret)
+ goto fail;
+ return 0;
+
+fail:
+ free(llun);
+ return -1;
+}
+
+static void
+lsi_scsi_scan_target(struct pci_device *pci, u32 iobase, u8 target)
+{
+ /* TODO: send REPORT LUNS. For now, only LUN 0 is recognized. */
+ lsi_scsi_add_lun(pci, iobase, target, 0);
+}
+
+static void
+init_lsi_scsi(struct pci_device *pci)
+{
+ u16 bdf = pci->bdf;
+ u32 iobase = pci_config_readl(pci->bdf, PCI_BASE_ADDRESS_0)
+ & PCI_BASE_ADDRESS_IO_MASK;
+
+ dprintf(1, "found lsi53c895a at %02x:%02x.%x, io @ %x\n",
+ pci_bdf_to_bus(bdf), pci_bdf_to_dev(bdf),
+ pci_bdf_to_fn(bdf), iobase);
+
+ // reset
+ outb(LSI_ISTAT0_SRST, iobase + LSI_REG_ISTAT0);
+
+ int i;
+ for (i = 0; i < 7; i++)
+ lsi_scsi_scan_target(pci, iobase, i);
+
+ return;
+}
+
+void
+lsi_scsi_setup(void)
+{
+ ASSERT32FLAT();
+ if (!CONFIG_LSI_SCSI)
+ return;
+
+ dprintf(3, "init lsi53c895a\n");
+
+ struct pci_device *pci;
+ foreachpci(pci) {
+ if (pci->vendor != PCI_VENDOR_ID_LSI_LOGIC
+ || pci->device != PCI_DEVICE_ID_LSI_53C895A)
+ continue;
+ init_lsi_scsi(pci);
+ }
+}
projects / seabios.git / commitdiff