seabios q35: Add new PCI slot to irq routing function

q35/ich9 doesn't use the same interrupt mapping function as
i440fx/piix.  PIRQA:D and PIRQE:H are programmed identically, but we
start at index 0, not index -1.  Slots 25 through 31 are also
programmed independently.

When running qemu w/o this patch, a device at address 0:6.0 will have
its PCI interrupt line register programmed with irq 10 (as seen by
info pci), but it actually uses irq 11 (as reported the guest).  Half
of the interrupt lines are misprogrammedi like this.  Functionally, a
fully emulated qemu guest doesn't care much, but when we try to use
device assignment, we really need to know the correct irqs.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>

diff --git a/src/pciinit.c b/src/pciinit.c
index 857e8af781ab8ca3bec2e720061a3d0ef587515a..c670a2bf5b0fc0b9fee5ed40a9d221e4b63a027f 100644 (file)
--- a/src/pciinit.c
+++ b/src/pciinit.c
@@ -91,8 +91,10 @@ const u8 pci_irqs[4] = {
     10, 10, 11, 11
 };
 
+static int (*pci_slot_get_irq)(struct pci_device *pci, int pin);
+
 // Return the global irq number corresponding to a host bus device irq pin.
-static int pci_slot_get_irq(struct pci_device *pci, int pin)
+static int piix_pci_slot_get_irq(struct pci_device *pci, int pin)
 {
     int slot_addend = 0;
 
@@ -104,6 +106,31 @@ static int pci_slot_get_irq(struct pci_device *pci, int pin)
     return pci_irqs[(pin - 1 + slot_addend) & 3];
 }
 
+static int mch_pci_slot_get_irq(struct pci_device *pci, int pin)
+{
+    int irq, slot, pin_addend = 0;
+
+    while (pci->parent != NULL) {
+        pin_addend += pci_bdf_to_dev(pci->bdf);
+        pci = pci->parent;
+    }
+    slot = pci_bdf_to_dev(pci->bdf);
+
+    switch (slot) {
+    /* Slots 0-24 rotate slot:pin mapping similar to piix above, but
+       with a different starting index - see q35-acpi-dsdt.dsl */
+    case 0 ... 24:
+        irq = pci_irqs[(pin - 1 + pin_addend + slot) & 3];
+        break;
+    /* Slots 25-31 all use LNKA mapping (or LNKE, but A:D = E:H) */
+    case 25 ... 31:
+        irq = pci_irqs[(pin - 1 + pin_addend) & 3];
+        break;
+    }
+
+    return irq;
+}
+
 /* PIIX3/PIIX4 PCI to ISA bridge */
 static void piix_isa_bridge_init(struct pci_device *pci, void *arg)
 {
@@ -292,6 +319,8 @@ void i440fx_mem_addr_init(struct pci_device *dev, void *arg)
         pcimem_start = 0x80000000;
     else if (RamSize <= 0xc0000000)
         pcimem_start = 0xc0000000;
+
+    pci_slot_get_irq = piix_pci_slot_get_irq;
 }
 
 void mch_mem_addr_init(struct pci_device *dev, void *arg)
@@ -310,6 +339,8 @@ void mch_mem_addr_init(struct pci_device *dev, void *arg)
 
     /* setup pci i/o window (above mmconfig) */
     pcimem_start = addr + size;
+
+    pci_slot_get_irq = mch_pci_slot_get_irq;
 }
 
 static const struct pci_device_id pci_platform_tbl[] = {