The old logic didn't work as intended when an access spanned multiple

fields (for example a 32-bit access to the location of the MSI Message
Data field with the high 16 bits not being covered by any known field).
Remove it and derive which fields not to write to from the accessed
fields' emulation masks: When they're all ones, there's no point in
doing any host write.

This fixes a secondary issue at once: We obviously shouldn't make any
host write attempt when already the host read failed.

This is XSA-128.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>

diff --git a/hw/pass-through.c b/hw/pass-through.c
index eb2704b1c40fecbcb353c96f59e041a80f31aefc..6157afecaa3a9fefe624fc147160c8c0be380c49 100644 (file)
--- a/hw/pass-through.c
+++ b/hw/pass-through.c
@@ -454,7 +454,7 @@ static struct pt_reg_info_tbl pt_emu_reg_header0_tbl[] = {
         .offset     = PCI_INTEL_OPREGION,
         .size       = 4,
         .init_val   = 0,
-        .no_wb      = 1,
+        .emu_mask   = 0xFFFFFFFF,
         .u.dw.read   = pt_intel_opregion_read,
         .u.dw.write  = pt_intel_opregion_write,
         .u.dw.restore  = NULL,
@@ -657,7 +657,6 @@ static struct pt_reg_info_tbl pt_emu_reg_msi_tbl[] = {
         .init_val   = 0x00000000,
         .ro_mask    = 0x00000003,
         .emu_mask   = 0xFFFFFFFF,
-        .no_wb      = 1,
         .init       = pt_common_reg_init,
         .u.dw.read  = pt_long_reg_read,
         .u.dw.write = pt_msgaddr32_reg_write,
@@ -670,7 +669,6 @@ static struct pt_reg_info_tbl pt_emu_reg_msi_tbl[] = {
         .init_val   = 0x00000000,
         .ro_mask    = 0x00000000,
         .emu_mask   = 0xFFFFFFFF,
-        .no_wb      = 1,
         .init       = pt_msgaddr64_reg_init,
         .u.dw.read  = pt_long_reg_read,
         .u.dw.write = pt_msgaddr64_reg_write,
@@ -683,7 +681,6 @@ static struct pt_reg_info_tbl pt_emu_reg_msi_tbl[] = {
         .init_val   = 0x0000,
         .ro_mask    = 0x0000,
         .emu_mask   = 0xFFFF,
-        .no_wb      = 1,
         .init       = pt_msgdata_reg_init,
         .u.w.read   = pt_word_reg_read,
         .u.w.write  = pt_msgdata_reg_write,
@@ -696,7 +693,6 @@ static struct pt_reg_info_tbl pt_emu_reg_msi_tbl[] = {
         .init_val   = 0x0000,
         .ro_mask    = 0x0000,
         .emu_mask   = 0xFFFF,
-        .no_wb      = 1,
         .init       = pt_msgdata_reg_init,
         .u.w.read   = pt_word_reg_read,
         .u.w.write  = pt_msgdata_reg_write,
@@ -1524,7 +1520,7 @@ static void pt_pci_write_config(PCIDevice *d, uint32_t address, uint32_t val,
     uint32_t find_addr = address;
     uint32_t real_offset = 0;
     uint32_t valid_mask = 0xFFFFFFFF;
-    uint32_t read_val = 0;
+    uint32_t read_val = 0, wb_mask;
     uint8_t *ptr_val = NULL;
     int emul_len = 0;
     int index = 0;
@@ -1597,7 +1593,10 @@ static void pt_pci_write_config(PCIDevice *d, uint32_t address, uint32_t val,
     {
         PT_LOG("Error: pci_read_block failed. return value[%d].\n", ret);
         memset((uint8_t *)&read_val, 0xff, len);
+        wb_mask = 0;
     }
+    else
+        wb_mask = 0xFFFFFFFF >> ((4 - len) << 3);
 
     /* pass directly to libpci for passthrough type register group */
     if (reg_grp_entry == NULL)
@@ -1620,6 +1619,11 @@ static void pt_pci_write_config(PCIDevice *d, uint32_t address, uint32_t val,
             valid_mask = (0xFFFFFFFF >> ((4 - emul_len) << 3));
             valid_mask <<= ((find_addr - real_offset) << 3);
             ptr_val = ((uint8_t *)&val + (real_offset & 3));
+            if (reg->emu_mask == (0xFFFFFFFF >> ((4 - reg->size) << 3))) {
+                wb_mask &= ~((reg->emu_mask
+                              >> ((find_addr - real_offset) << 3))
+                             << ((len - emul_len) << 3));
+            }
 
             /* do emulation depend on register size */
             switch (reg->size) {
@@ -1677,8 +1681,19 @@ static void pt_pci_write_config(PCIDevice *d, uint32_t address, uint32_t val,
     val >>= ((address & 3) << 3);
 
 out:
-    if (!(reg && reg->no_wb)) {  /* unknown regs are passed through */
-        ret = pci_write_block(pci_dev, address, (uint8_t *)&val, len);
+    for (index = 0; wb_mask; index += len) {
+        /* unknown regs are passed through */
+        while (!(wb_mask & 0xff)) {
+            index++;
+            wb_mask >>= 8;
+        }
+        len = 0;
+        do {
+            len++;
+            wb_mask >>= 8;
+        } while (wb_mask & 0xff);
+        ret = pci_write_block(pci_dev, address + index,
+                              (uint8_t *)&val + index, len);
 
         if (!ret)
             PT_LOG("Error: pci_write_block failed. return value[%d].\n", ret);

diff --git a/hw/pass-through.h b/hw/pass-through.h
index d7d837c91cb1f9bfad0f3ac132a62a2f6afce664..2f11a808e46ebb8bcb54197f6e99db773fb41cba 100644 (file)
--- a/hw/pass-through.h
+++ b/hw/pass-through.h
@@ -372,8 +372,6 @@ struct pt_reg_info_tbl {
     uint32_t ro_mask;
     /* reg emulate field mask (ON:emu, OFF:passthrough) */
     uint32_t emu_mask;
-    /* no write back allowed */
-    uint32_t no_wb;
     /* emul reg initialize method */
     conf_reg_init init;
     union {