Use configure to generate sysconfig.xendomains file.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
tools/hotplug/FreeBSD/rc.d/xencommons
tools/hotplug/FreeBSD/rc.d/xendriverdomain
tools/hotplug/Linux/init.d/sysconfig.xencommons
+tools/hotplug/Linux/init.d/sysconfig.xendomains
tools/hotplug/Linux/init.d/xen-watchdog
tools/hotplug/Linux/init.d/xencommons
tools/hotplug/Linux/init.d/xendomains
-ac_config_files="$ac_config_files ../config/Tools.mk hotplug/FreeBSD/rc.d/xencommons hotplug/FreeBSD/rc.d/xendriverdomain hotplug/Linux/init.d/sysconfig.xencommons hotplug/Linux/init.d/xen-watchdog hotplug/Linux/init.d/xencommons hotplug/Linux/init.d/xendomains hotplug/Linux/init.d/xendriverdomain hotplug/Linux/vif-setup hotplug/Linux/xen-hotplug-common.sh hotplug/Linux/xendomains hotplug/NetBSD/rc.d/xencommons hotplug/NetBSD/rc.d/xendriverdomain libxl/xenlight.pc.in libxl/xlutil.pc.in ocaml/xenstored/oxenstored.conf"
+ac_config_files="$ac_config_files ../config/Tools.mk hotplug/FreeBSD/rc.d/xencommons hotplug/FreeBSD/rc.d/xendriverdomain hotplug/Linux/init.d/sysconfig.xencommons hotplug/Linux/init.d/sysconfig.xendomains hotplug/Linux/init.d/xen-watchdog hotplug/Linux/init.d/xencommons hotplug/Linux/init.d/xendomains hotplug/Linux/init.d/xendriverdomain hotplug/Linux/vif-setup hotplug/Linux/xen-hotplug-common.sh hotplug/Linux/xendomains hotplug/NetBSD/rc.d/xencommons hotplug/NetBSD/rc.d/xendriverdomain libxl/xenlight.pc.in libxl/xlutil.pc.in ocaml/xenstored/oxenstored.conf"
ac_config_headers="$ac_config_headers config.h"
"hotplug/FreeBSD/rc.d/xencommons") CONFIG_FILES="$CONFIG_FILES hotplug/FreeBSD/rc.d/xencommons" ;;
"hotplug/FreeBSD/rc.d/xendriverdomain") CONFIG_FILES="$CONFIG_FILES hotplug/FreeBSD/rc.d/xendriverdomain" ;;
"hotplug/Linux/init.d/sysconfig.xencommons") CONFIG_FILES="$CONFIG_FILES hotplug/Linux/init.d/sysconfig.xencommons" ;;
+ "hotplug/Linux/init.d/sysconfig.xendomains") CONFIG_FILES="$CONFIG_FILES hotplug/Linux/init.d/sysconfig.xendomains" ;;
"hotplug/Linux/init.d/xen-watchdog") CONFIG_FILES="$CONFIG_FILES hotplug/Linux/init.d/xen-watchdog" ;;
"hotplug/Linux/init.d/xencommons") CONFIG_FILES="$CONFIG_FILES hotplug/Linux/init.d/xencommons" ;;
"hotplug/Linux/init.d/xendomains") CONFIG_FILES="$CONFIG_FILES hotplug/Linux/init.d/xendomains" ;;
hotplug/FreeBSD/rc.d/xencommons
hotplug/FreeBSD/rc.d/xendriverdomain
hotplug/Linux/init.d/sysconfig.xencommons
+hotplug/Linux/init.d/sysconfig.xendomains
hotplug/Linux/init.d/xen-watchdog
hotplug/Linux/init.d/xencommons
hotplug/Linux/init.d/xendomains
+++ /dev/null
-## Path: System/Virtualization
-## Description: xen domain start/stop on boot
-## Type: string
-## Default:
-#
-# The xendomains script can send SysRq requests to domains on shutdown.
-# If you don't want to MIGRATE, SAVE, or SHUTDOWN, this may be a possibility
-# to do a quick and dirty shutdown ("s e i u o") or at least sync the disks
-# of the domains ("s").
-#
-XENDOMAINS_SYSRQ=""
-
-## Type: integer
-## Default: 100000
-#
-# If XENDOMAINS_SYSRQ is set, this variable determines how long to wait
-# (in microseconds) after each SysRq, so the domain has a chance to react.
-# If you want to a quick'n'dirty shutdown via SysRq, you may want to set
-# it to a relatively high value (1200000).
-#
-XENDOMAINS_USLEEP=100000
-
-## Type: integer
-## Default: 5000000
-#
-# When creating a guest domain, it is sensible to allow a little time for it
-# to get started before creating another domain or proceeding through the
-# boot process. Without this, the booting guests will thrash the disk as they
-# start up. This timeout (in microseconds) specifies the delay after guest
-# domain creation.
-#
-XENDOMAINS_CREATE_USLEEP=5000000
-
-## Type: string
-## Default: ""
-#
-# Set this to a non-empty string if you want to migrate virtual machines
-# on shutdown. The string will be passed to the xm migrate DOMID command
-# as is: It should contain the target IP address of the physical machine
-# to migrate to and optionally parameters like --live. Leave empty if
-# you don't want to try virtual machine relocation on shutdown.
-# If migration succeeds, neither SAVE nor SHUTDOWN will be executed for
-# that domain.
-#
-XENDOMAINS_MIGRATE=""
-
-## Type: string
-## Default: /var/lib/xen/save
-#
-# Directory to save running domains to when the system (dom0) is
-# shut down. Will also be used to restore domains from if # XENDOMAINS_RESTORE
-# is set (see below). Leave empty to disable domain saving on shutdown
-# (e.g. because you rather shut domains down).
-# If domain saving does succeed, SHUTDOWN will not be executed.
-#
-XENDOMAINS_SAVE=/var/lib/xen/save
-
-## Type: string
-## Default: "--wait"
-#
-# If neither MIGRATE nor SAVE were enabled or if they failed, you can
-# try to shut down a domain by sending it a shutdown request. To do this,
-# set this to "--wait". Omit the "--wait" flag to avoid waiting
-# for the domain to be really down. Leave empty to skip domain shutdown.
-#
-XENDOMAINS_SHUTDOWN="--wait"
-
-## Type: string
-## Default: "--all --wait"
-#
-# After we have gone over all virtual machines (resp. all automatically
-# started ones, see XENDOMAINS_AUTO_ONLY below) in a loop and sent SysRq,
-# migrated, saved and/or shutdown according to the settings above, we
-# might want to shutdown the virtual machines that are still running
-# for some reason or another. To do this, set this variable to
-# "--all --wait", it will be passed to xm shutdown.
-# Leave it empty not to do anything special here.
-# (Note: This will hit all virtual machines, even if XENDOMAINS_AUTO_ONLY
-# is set.)
-#
-XENDOMAINS_SHUTDOWN_ALL="--all --wait"
-
-## Type: boolean
-## Default: true
-#
-# This variable determines whether saved domains from XENDOMAINS_SAVE
-# will be restored on system startup.
-#
-XENDOMAINS_RESTORE=true
-
-## Type: string
-## Default: /etc/xen/auto
-#
-# This variable sets the directory where domains configurations
-# are stored that should be started on system startup automatically.
-# Leave empty if you don't want to start domains automatically
-# (or just don't place any xen domain config files in that dir).
-# Note that the script tries to be clever if both RESTORE and AUTO are
-# set: It will first restore saved domains and then only start domains
-# in AUTO which are not running yet.
-# Note that the name matching is somewhat fuzzy.
-#
-XENDOMAINS_AUTO=/etc/xen/auto
-
-## Type: boolean
-## Default: true
-#
-# If this variable is set to "true", only the domains started via config
-# files in XENDOMAINS_AUTO will be treated according to XENDOMAINS_SYSRQ,
-# XENDOMAINS_MIGRATE, XENDOMAINS_SAVE, XENDMAINS_SHUTDOWN; otherwise
-# all running domains will be.
-# Note that the name matching is somewhat fuzzy.
-#
-XENDOMAINS_AUTO_ONLY=true
-
-## Type: integer
-## Default: 300
-#
-# On xendomains stop, a number of xm commands (xm migrate, save, shutdown,
-# shutdown --all) may be executed. In the worst case, these commands may
-# stall forever, which will prevent a successful shutdown of the machine.
-# If this variable is non-zero, the script will set up a watchdog timer
-# for every of these xm commands and time it out after the number of seconds
-# specified by this variable.
-# Note that SHUTDOWN_ALL will not be called if no virtual machines or only
-# zombies are still running, so you don't need to enable this timeout just
-# for the zombie case.
-# The setting should be large enough to make sure that migrate/save/shutdown
-# can succeed. If you do live migrations, keep in mind that live migration
-# of a 1GB machine over Gigabit ethernet may actually take something like
-# 100s (assuming that live migration uses 10% of the network # bandwidth).
-# Depending on the virtual machine, a shutdown may also require a significant
-# amount of time. So better setup this variable to a huge number and hope the
-# watchdog never fires.
-#
-XENDOMAINS_STOP_MAXWAIT=300
-
--- /dev/null
+## Path: System/Virtualization
+## Description: xen domain start/stop on boot
+## Type: string
+## Default:
+#
+# The xendomains script can send SysRq requests to domains on shutdown.
+# If you don't want to MIGRATE, SAVE, or SHUTDOWN, this may be a possibility
+# to do a quick and dirty shutdown ("s e i u o") or at least sync the disks
+# of the domains ("s").
+#
+XENDOMAINS_SYSRQ=""
+
+## Type: integer
+## Default: 100000
+#
+# If XENDOMAINS_SYSRQ is set, this variable determines how long to wait
+# (in microseconds) after each SysRq, so the domain has a chance to react.
+# If you want to a quick'n'dirty shutdown via SysRq, you may want to set
+# it to a relatively high value (1200000).
+#
+XENDOMAINS_USLEEP=100000
+
+## Type: integer
+## Default: 5000000
+#
+# When creating a guest domain, it is sensible to allow a little time for it
+# to get started before creating another domain or proceeding through the
+# boot process. Without this, the booting guests will thrash the disk as they
+# start up. This timeout (in microseconds) specifies the delay after guest
+# domain creation.
+#
+XENDOMAINS_CREATE_USLEEP=5000000
+
+## Type: string
+## Default: ""
+#
+# Set this to a non-empty string if you want to migrate virtual machines
+# on shutdown. The string will be passed to the xm migrate DOMID command
+# as is: It should contain the target IP address of the physical machine
+# to migrate to and optionally parameters like --live. Leave empty if
+# you don't want to try virtual machine relocation on shutdown.
+# If migration succeeds, neither SAVE nor SHUTDOWN will be executed for
+# that domain.
+#
+XENDOMAINS_MIGRATE=""
+
+## Type: string
+## Default: @XEN_LIB_DIR@/save
+#
+# Directory to save running domains to when the system (dom0) is
+# shut down. Will also be used to restore domains from if # XENDOMAINS_RESTORE
+# is set (see below). Leave empty to disable domain saving on shutdown
+# (e.g. because you rather shut domains down).
+# If domain saving does succeed, SHUTDOWN will not be executed.
+#
+XENDOMAINS_SAVE=@XEN_LIB_DIR@/save
+
+## Type: string
+## Default: "--wait"
+#
+# If neither MIGRATE nor SAVE were enabled or if they failed, you can
+# try to shut down a domain by sending it a shutdown request. To do this,
+# set this to "--wait". Omit the "--wait" flag to avoid waiting
+# for the domain to be really down. Leave empty to skip domain shutdown.
+#
+XENDOMAINS_SHUTDOWN="--wait"
+
+## Type: string
+## Default: "--all --wait"
+#
+# After we have gone over all virtual machines (resp. all automatically
+# started ones, see XENDOMAINS_AUTO_ONLY below) in a loop and sent SysRq,
+# migrated, saved and/or shutdown according to the settings above, we
+# might want to shutdown the virtual machines that are still running
+# for some reason or another. To do this, set this variable to
+# "--all --wait", it will be passed to xm shutdown.
+# Leave it empty not to do anything special here.
+# (Note: This will hit all virtual machines, even if XENDOMAINS_AUTO_ONLY
+# is set.)
+#
+XENDOMAINS_SHUTDOWN_ALL="--all --wait"
+
+## Type: boolean
+## Default: true
+#
+# This variable determines whether saved domains from XENDOMAINS_SAVE
+# will be restored on system startup.
+#
+XENDOMAINS_RESTORE=true
+
+## Type: string
+## Default: /etc/xen/auto
+#
+# This variable sets the directory where domains configurations
+# are stored that should be started on system startup automatically.
+# Leave empty if you don't want to start domains automatically
+# (or just don't place any xen domain config files in that dir).
+# Note that the script tries to be clever if both RESTORE and AUTO are
+# set: It will first restore saved domains and then only start domains
+# in AUTO which are not running yet.
+# Note that the name matching is somewhat fuzzy.
+#
+XENDOMAINS_AUTO=/etc/xen/auto
+
+## Type: boolean
+## Default: true
+#
+# If this variable is set to "true", only the domains started via config
+# files in XENDOMAINS_AUTO will be treated according to XENDOMAINS_SYSRQ,
+# XENDOMAINS_MIGRATE, XENDOMAINS_SAVE, XENDMAINS_SHUTDOWN; otherwise
+# all running domains will be.
+# Note that the name matching is somewhat fuzzy.
+#
+XENDOMAINS_AUTO_ONLY=true
+
+## Type: integer
+## Default: 300
+#
+# On xendomains stop, a number of xm commands (xm migrate, save, shutdown,
+# shutdown --all) may be executed. In the worst case, these commands may
+# stall forever, which will prevent a successful shutdown of the machine.
+# If this variable is non-zero, the script will set up a watchdog timer
+# for every of these xm commands and time it out after the number of seconds
+# specified by this variable.
+# Note that SHUTDOWN_ALL will not be called if no virtual machines or only
+# zombies are still running, so you don't need to enable this timeout just
+# for the zombie case.
+# The setting should be large enough to make sure that migrate/save/shutdown
+# can succeed. If you do live migrations, keep in mind that live migration
+# of a 1GB machine over Gigabit ethernet may actually take something like
+# 100s (assuming that live migration uses 10% of the network # bandwidth).
+# Depending on the virtual machine, a shutdown may also require a significant
+# amount of time. So better setup this variable to a huge number and hope the
+# watchdog never fires.
+#
+XENDOMAINS_STOP_MAXWAIT=300
+
projects / xen.git / commitdiff