x86/apic: simplify disconnect_bsp_APIC setup of LVT{0/1}

There's no need to read the current values of LVT{0/1} for the
purposes of the function, which seem to be to save the currently
selected vector: in the destination modes used (ExtINT and NMI) the
vector field is ignored and hence can be set to 0.

Note that clear_local_APIC as called by init_bsp_APIC would have
already wiped those registers by writing APIC_LVT_MASKED, and hence
there's nothing useful to preserve if that was the intent. Also note
that there are other places where LVT{0/1} is written to without doing
a read-modify-write (init_bsp_APIC and clear_local_APIC), so if
writing 0s to the reserved parts would cause issues they would be also
triggered by writes elsewhere.

Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
---
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Jan Beulich <jbeulich@suse.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>

diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 5f973fed3c9ff21ba96692cd6d6c1d454c16acf4..ba5d7a50a7ef565a699dc9ae38695e0a8b6b4568 100644 (file)
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -2305,12 +2305,7 @@ void disconnect_bsp_APIC(int virt_wire_setup)
                 * For LVT0 make it edge triggered, active high,
                 * external and enabled
                 */
-               value = apic_read(APIC_LVT0);
-               value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
-                       APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
-                       APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
-               value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
-               value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT);
+               value = APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING | APIC_DM_EXTINT;
                apic_write(APIC_LVT0, value);
        } else {
                /* Disable LVT0 */
@@ -2321,12 +2316,7 @@ void disconnect_bsp_APIC(int virt_wire_setup)
         * For LVT1 make it edge triggered, active high,
         * nmi and enabled
         */
-       value = apic_read(APIC_LVT1);
-       value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
-                       APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
-                       APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
-       value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
-       value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI);
+       value = APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING | APIC_DM_NMI;
        apic_write(APIC_LVT1, value);
 }