ASoC: sgtl5000: add delay before first I2C access

commit 58cc9c9a175885bbf6bae3acf18233d0a8229a84 upstream.

To quote from section 1.3.1 of the data sheet:
	The SGTL5000 has an internal reset that is deasserted
	8 SYS_MCLK cycles after all power rails have been brought
	up. After this time, communication can start

	...
	1.0us represents 8 SYS_MCLK cycles at the minimum 8.0 MHz SYS_MCLK.

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
index 12528e9ac4c29076ca60851c201435eda2d912b6..715589ff0eda8e2788d341c6badb2911b82be3d1 100644 (file)
--- a/sound/soc/codecs/sgtl5000.c
+++ b/sound/soc/codecs/sgtl5000.c
@@ -1521,6 +1521,9 @@ static int sgtl5000_i2c_probe(struct i2c_client *client,
        if (ret)
                return ret;
 
+       /* Need 8 clocks before I2C accesses */
+       udelay(1);
+
        /* read chip information */
        ret = regmap_read(sgtl5000->regmap, SGTL5000_CHIP_ID, &reg);
        if (ret)