automation: Add arm32 dom0less testing

At the moment, we only perform a single arm32 test in our CI, checking
whether dom0 boots successfully or not. This is mostly because we do not
have any arm32 runners and we only execute a hypervisor only build.

In order not to leave the arm32 testing in such a poor state, add a
script qemu-smoke-dom0less-arm32.sh to start testing dom0less
configuration, while keeping dom0 to make the test more interesting.

The script is mostly based on the one used for dom0 arm32 testing as well
as the one used for dom0less arm64 testing. We obtain Debian Bullseye
kernel and Alpine Linux busybox-based rootfs. Depending on the test
variant, we prepare a test case contained within domU_check variable,
that will be executed as part of /init script from domU rootfs.

Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>

diff --git a/automation/gitlab-ci/test.yaml b/automation/gitlab-ci/test.yaml
index ce543ef5c0effa04da2cf3cb313984657de322c0..84ab1fee50a46e6f38b504be18fb48d4afd0ac24 100644 (file)
--- a/automation/gitlab-ci/test.yaml
+++ b/automation/gitlab-ci/test.yaml
@@ -210,6 +210,22 @@ qemu-smoke-dom0-arm32-gcc-debug:
     - *arm32-test-needs
     - debian-unstable-gcc-arm32-debug
 
+qemu-smoke-dom0less-arm32-gcc:
+  extends: .qemu-arm32
+  script:
+    - ./automation/scripts/qemu-smoke-dom0less-arm32.sh 2>&1 | tee ${LOGFILE}
+  needs:
+    - *arm32-test-needs
+    - debian-unstable-gcc-arm32
+
+qemu-smoke-dom0less-arm32-gcc-debug:
+  extends: .qemu-arm32
+  script:
+    - ./automation/scripts/qemu-smoke-dom0less-arm32.sh 2>&1 | tee ${LOGFILE}
+  needs:
+    - *arm32-test-needs
+    - debian-unstable-gcc-arm32-debug
+
 qemu-alpine-x86_64-gcc:
   extends: .qemu-x86-64
   script:

diff --git a/automation/scripts/qemu-smoke-dom0less-arm32.sh b/automation/scripts/qemu-smoke-dom0less-arm32.sh
new file mode 100755 (executable)
index 0000000..e3f2b28
--- /dev/null
+++ b/automation/scripts/qemu-smoke-dom0less-arm32.sh
@@ -0,0 +1,99 @@
+#!/bin/bash
+
+set -ex
+
+test_variant=$1
+
+# Prompt to grep for to check if dom0 booted successfully
+dom0_prompt="^/ #"
+
+cd binaries
+# Use the kernel from Debian
+curl --fail --silent --show-error --location --output vmlinuz https://deb.debian.org/debian/dists/bullseye/main/installer-armhf/current/images/netboot/vmlinuz
+# Use a tiny initrd based on busybox from Alpine Linux
+curl --fail --silent --show-error --location --output initrd.tar.gz https://dl-cdn.alpinelinux.org/alpine/v3.15/releases/armhf/alpine-minirootfs-3.15.1-armhf.tar.gz
+
+if [ -z "${test_variant}" ]; then
+    passed="generic test passed"
+    domU_check="
+echo \"${passed}\"
+"
+fi
+
+# dom0/domU rootfs
+# We are using the same rootfs for dom0 and domU. The only difference is
+# that for the former, we set explictly rdinit to /bin/sh, whereas for the
+# latter we rely on using custom /init script with test case inside.
+mkdir rootfs
+cd rootfs
+tar xvzf ../initrd.tar.gz
+echo "#!/bin/sh
+
+mount -t proc proc /proc
+mount -t sysfs sysfs /sys
+mount -t devtmpfs devtmpfs /dev
+${domU_check}
+/bin/sh" > init
+chmod +x init
+find . | cpio -H newc -o | gzip > ../initrd.gz
+cd ..
+
+# XXX QEMU looks for "efi-virtio.rom" even if it is unneeded
+curl -fsSLO https://github.com/qemu/qemu/raw/v5.2.0/pc-bios/efi-virtio.rom
+./qemu-system-arm \
+    -machine virt \
+    -machine virtualization=true \
+    -smp 4 \
+    -m 2048 \
+    -serial stdio \
+    -monitor none \
+    -display none \
+    -machine dumpdtb=virt.dtb
+
+# ImageBuilder
+echo 'MEMORY_START="0x40000000"
+MEMORY_END="0xC0000000"
+
+DEVICE_TREE="virt.dtb"
+XEN="xen"
+XEN_CMD="console=dtuart dom0_mem=512M bootscrub=0"
+
+DOM0_KERNEL="vmlinuz"
+DOM0_RAMDISK="initrd.gz"
+DOM0_CMD="console=hvc0 earlyprintk clk_ignore_unused root=/dev/ram0 rdinit=/bin/sh"
+
+DOMU_KERNEL[0]="vmlinuz"
+DOMU_RAMDISK[0]="initrd.gz"
+DOMU_MEM[0]="512"
+NUM_DOMUS=1
+
+LOAD_CMD="tftpb"
+BOOT_CMD="bootm"
+UBOOT_SOURCE="boot.source"
+UBOOT_SCRIPT="boot.scr"' > config
+
+rm -rf imagebuilder
+git clone https://gitlab.com/ViryaOS/imagebuilder
+bash imagebuilder/scripts/uboot-script-gen -t tftp -d . -c config
+
+# Run the test
+rm -f smoke.serial
+set +e
+echo "  virtio scan; dhcp; tftpb 0x40000000 boot.scr; source 0x40000000"| \
+timeout -k 1 240 \
+./qemu-system-arm \
+    -machine virt \
+    -machine virtualization=true \
+    -smp 4 \
+    -m 2048 \
+    -serial stdio \
+    -monitor none \
+    -display none \
+    -no-reboot \
+    -device virtio-net-pci,netdev=n0 \
+    -netdev user,id=n0,tftp=./ \
+    -bios /usr/lib/u-boot/qemu_arm/u-boot.bin |& tee smoke.serial
+
+set -e
+(grep -q "${dom0_prompt}" smoke.serial && grep -q "${passed}" smoke.serial) || exit 1
+exit 0