xen: arm: Drop EARLY_PRINTK_BAUD from entries which don't set ..._INIT_UART

EARLY_PRINTK_BAUD doesn't do anything unless EARLY_PRINTK_INIT_UART is set.

Furthermore only the pl011 driver implements the init routine at all, so the
entries which use any other UART driver and specified a BAUD were doubly wrong.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Julien Grall <julien.grall@linaro.org>

diff --git a/xen/arch/arm/Rules.mk b/xen/arch/arm/Rules.mk
index 30c78232d977f1f5f337721ff9a24645d8946c67..4ee51a92333cf34d294fd6a4f2e32064b81c3e45 100644 (file)
--- a/xen/arch/arm/Rules.mk
+++ b/xen/arch/arm/Rules.mk
@@ -45,7 +45,6 @@ ifeq ($(debug),y)
 # Early printk for versatile express
 ifeq ($(CONFIG_EARLY_PRINTK), vexpress)
 EARLY_PRINTK_INC := pl011
-EARLY_PRINTK_BAUD := 38400
 EARLY_UART_BASE_ADDRESS := 0x1c090000
 endif
 ifeq ($(CONFIG_EARLY_PRINTK), fastmodel)
@@ -56,12 +55,10 @@ EARLY_UART_BASE_ADDRESS := 0x1c090000
 endif
 ifeq ($(CONFIG_EARLY_PRINTK), exynos5250)
 EARLY_PRINTK_INC := exynos4210
-EARLY_PRINTK_BAUD := 115200
 EARLY_UART_BASE_ADDRESS := 0x12c20000
 endif
 ifeq ($(CONFIG_EARLY_PRINTK), midway)
 EARLY_PRINTK_INC := pl011
-EARLY_PRINTK_BAUD := 115200
 EARLY_UART_BASE_ADDRESS := 0xfff36000
 endif
 ifeq ($(CONFIG_EARLY_PRINTK), omap5432)
@@ -91,7 +88,6 @@ EARLY_UART_REG_SHIFT := 2
 endif
 ifeq ($(CONFIG_EARLY_PRINTK), xgene-storm)
 EARLY_PRINTK_INC := 8250
-EARLY_PRINTK_BAUD := 115200
 EARLY_UART_BASE_ADDRESS := 0x1c020000
 EARLY_UART_REG_SHIFT := 2
 endif
@@ -102,18 +98,15 @@ EARLY_UART_REG_SHIFT := 2
 endif
 ifeq ($(CONFIG_EARLY_PRINTK), juno)
 EARLY_PRINTK_INC := pl011
-EARLY_PRINTK_BAUD := 115200
 EARLY_UART_BASE_ADDRESS := 0x7ff80000
 endif
 ifeq ($(CONFIG_EARLY_PRINTK), hip04-d01)
 EARLY_PRINTK_INC := 8250
-EARLY_PRINTK_BAUD := 115200
 EARLY_UART_BASE_ADDRESS := 0xE4007000
 EARLY_UART_REG_SHIFT := 2
 endif
 ifeq ($(CONFIG_EARLY_PRINTK), seattle)
 EARLY_PRINTK_INC := pl011
-EARLY_PRINTK_BAUD := 115200
 EARLY_UART_BASE_ADDRESS := 0xe1010000
 endif