]> xenbits.xensource.com Git - qemu-xen.git/commitdiff
hw/cxl/mbox: Add Physical Switch Identify command.
authorJonathan Cameron <Jonathan.Cameron@huawei.com>
Mon, 23 Oct 2023 16:07:57 +0000 (17:07 +0100)
committerMichael S. Tsirkin <mst@redhat.com>
Tue, 7 Nov 2023 08:39:11 +0000 (03:39 -0500)
Enable it for the switch CCI.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20231023160806.13206-9-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
hw/cxl/cxl-mailbox-utils.c
hw/pci-bridge/cxl_downstream.c
include/hw/cxl/cxl.h

index 6741698ee7c87e66010bd2c0fc6c67b41f8a6991..6ada49d37c328b4e47c5dd4dcf903109ac12a2b5 100644 (file)
@@ -70,6 +70,8 @@ enum {
         #define GET_POISON_LIST        0x0
         #define INJECT_POISON          0x1
         #define CLEAR_POISON           0x2
+    PHYSICAL_SWITCH = 0x51,
+        #define IDENTIFY_SWITCH_DEVICE      0x0
 };
 
 
@@ -257,6 +259,67 @@ static CXLRetCode cmd_infostat_identify(const struct cxl_cmd *cmd,
     return CXL_MBOX_SUCCESS;
 }
 
+static void cxl_set_dsp_active_bm(PCIBus *b, PCIDevice *d,
+                                  void *private)
+{
+    uint8_t *bm = private;
+    if (object_dynamic_cast(OBJECT(d), TYPE_CXL_DSP)) {
+        uint8_t port = PCIE_PORT(d)->port;
+        bm[port / 8] |= 1 << (port % 8);
+    }
+}
+
+/* CXL r3 8.2.9.1.1 */
+static CXLRetCode cmd_identify_switch_device(const struct cxl_cmd *cmd,
+                                             uint8_t *payload_in,
+                                             size_t len_in,
+                                             uint8_t *payload_out,
+                                             size_t *len_out,
+                                             CXLCCI *cci)
+{
+    PCIEPort *usp = PCIE_PORT(cci->d);
+    PCIBus *bus = &PCI_BRIDGE(cci->d)->sec_bus;
+    int num_phys_ports = pcie_count_ds_ports(bus);
+
+    struct cxl_fmapi_ident_switch_dev_resp_pl {
+        uint8_t ingress_port_id;
+        uint8_t rsvd;
+        uint8_t num_physical_ports;
+        uint8_t num_vcss;
+        uint8_t active_port_bitmask[0x20];
+        uint8_t active_vcs_bitmask[0x20];
+        uint16_t total_vppbs;
+        uint16_t bound_vppbs;
+        uint8_t num_hdm_decoders_per_usp;
+    } QEMU_PACKED *out;
+    QEMU_BUILD_BUG_ON(sizeof(*out) != 0x49);
+
+    out = (struct cxl_fmapi_ident_switch_dev_resp_pl *)payload_out;
+    *out = (struct cxl_fmapi_ident_switch_dev_resp_pl) {
+        .num_physical_ports = num_phys_ports + 1, /* 1 USP */
+        .num_vcss = 1, /* Not yet support multiple VCS - potentialy tricky */
+        .active_vcs_bitmask[0] = 0x1,
+        .total_vppbs = num_phys_ports + 1,
+        .bound_vppbs = num_phys_ports + 1,
+        .num_hdm_decoders_per_usp = 4,
+    };
+
+    /* Depends on the CCI type */
+    if (object_dynamic_cast(OBJECT(cci->intf), TYPE_PCIE_PORT)) {
+        out->ingress_port_id = PCIE_PORT(cci->intf)->port;
+    } else {
+        /* MCTP? */
+        out->ingress_port_id = 0;
+    }
+
+    pci_for_each_device_under_bus(bus, cxl_set_dsp_active_bm,
+                                  out->active_port_bitmask);
+    out->active_port_bitmask[usp->port / 8] |= (1 << usp->port % 8);
+
+    *len_out = sizeof(*out);
+
+    return CXL_MBOX_SUCCESS;
+}
 /* 8.2.9.2.1 */
 static CXLRetCode cmd_firmware_update_get_info(const struct cxl_cmd *cmd,
                                                uint8_t *payload_in,
@@ -816,6 +879,8 @@ static const struct cxl_cmd cxl_cmd_set_sw[256][256] = {
     [LOGS][GET_SUPPORTED] = { "LOGS_GET_SUPPORTED", cmd_logs_get_supported, 0,
                               0 },
     [LOGS][GET_LOG] = { "LOGS_GET_LOG", cmd_logs_get_log, 0x18, 0 },
+    [PHYSICAL_SWITCH][IDENTIFY_SWITCH_DEVICE] = { "IDENTIFY_SWITCH_DEVICE",
+        cmd_identify_switch_device, 0, 0 },
 };
 
 int cxl_process_cci_message(CXLCCI *cci, uint8_t set, uint8_t cmd,
index 8c0f759adde24e1fe064fd7c153761e8550ab6c7..8d99e1e96d855ca53d4547edff7c74004eb080c8 100644 (file)
@@ -13,6 +13,7 @@
 #include "hw/pci/msi.h"
 #include "hw/pci/pcie.h"
 #include "hw/pci/pcie_port.h"
+#include "hw/cxl/cxl.h"
 #include "qapi/error.h"
 
 typedef struct CXLDownstreamPort {
@@ -23,9 +24,6 @@ typedef struct CXLDownstreamPort {
     CXLComponentState cxl_cstate;
 } CXLDownstreamPort;
 
-#define TYPE_CXL_DSP "cxl-downstream"
-DECLARE_INSTANCE_CHECKER(CXLDownstreamPort, CXL_DSP, TYPE_CXL_DSP)
-
 #define CXL_DOWNSTREAM_PORT_MSI_OFFSET 0x70
 #define CXL_DOWNSTREAM_PORT_MSI_NR_VECTOR 1
 #define CXL_DOWNSTREAM_PORT_EXP_OFFSET 0x90
index 49447258492b94e8a56158a72d2d91ddad96a00c..75e47b6864414f7149a272201d3a3868eaa97af3 100644 (file)
@@ -61,4 +61,10 @@ OBJECT_DECLARE_SIMPLE_TYPE(CXLHost, PXB_CXL_HOST)
 typedef struct CXLUpstreamPort CXLUpstreamPort;
 DECLARE_INSTANCE_CHECKER(CXLUpstreamPort, CXL_USP, TYPE_CXL_USP)
 CXLComponentState *cxl_usp_to_cstate(CXLUpstreamPort *usp);
+
+#define TYPE_CXL_DSP "cxl-downstream"
+
+typedef struct CXLDownstreamPort CXLDownstreamPort;
+DECLARE_INSTANCE_CHECKER(CXLDownstreamPort, CXL_DSP, TYPE_CXL_DSP)
+
 #endif