SRCARCH=$(shell echo $(ARCH) | \
sed -e 's/x86.*/x86/' -e s'/arm\(32\|64\)/arm/g' \
-e s'/riscv.*/riscv/g')
+export ARCH SRCARCH
# Don't break if the build process wasn't called from the top level
# we need XEN_TARGET_ARCH to generate the proper config
config-build := y
endif
+export CONFIG_SHELL := $(SHELL)
+export YACC = $(if $(BISON),$(BISON),bison)
+export LEX = $(if $(FLEX),$(FLEX),flex)
+
+# Default file for 'make defconfig'.
+export KBUILD_DEFCONFIG := $(ARCH)_defconfig
+
# CLANG_FLAGS needs to be calculated before calling Kconfig
ifneq ($(shell $(CC) --version 2>&1 | head -n 1 | grep clang),)
CLANG_FLAGS :=
tools_fixdep:
$(MAKE) -C tools fixdep
-# Shorthand for kconfig
-kconfig = -f $(BASEDIR)/tools/kconfig/Makefile.kconfig ARCH=$(ARCH) SRCARCH=$(SRCARCH) HOSTCC="$(HOSTCC)" HOSTCXX="$(HOSTCXX)"
-
ifeq ($(config-build),y)
# ===========================================================================
# *config targets only - make sure prerequisites are updated, and descend
.allconfig.tmp: FORCE
set -e; { $(call filechk_kconfig_allconfig); } > $@
-config: FORCE
- $(MAKE) $(kconfig) $@
+config: tools_fixdep FORCE
+ $(Q)$(MAKE) $(build)=tools/kconfig $@
# Config.mk tries to include .config file, don't try to remake it
%/.config: ;
-%config: .allconfig.tmp FORCE
- $(MAKE) $(kconfig) KCONFIG_ALLCONFIG=$< $@
+%config: .allconfig.tmp tools_fixdep FORCE
+ $(Q)$(MAKE) $(build)=tools/kconfig KCONFIG_ALLCONFIG=$< $@
else # !config-build
# changes are detected.
-include include/config/auto.conf.cmd
+# This allows make to build fixdep before invoking defconfig. We can't use
+# "tools_fixdep" which is a .PHONY target and would force make to call
+# "defconfig" again to update $(KCONFIG_CONFIG).
+tools/fixdep:
+ $(MAKE) -C tools fixdep
+
# Allow people to just run `make` as before and not force them to configure
-$(KCONFIG_CONFIG):
- $(MAKE) $(kconfig) defconfig
+$(KCONFIG_CONFIG): tools/fixdep
+ $(Q)$(MAKE) $(build)=tools/kconfig defconfig
# The actual configuration files used during the build are stored in
# include/generated/ and include/config/. Update them if .config is newer than
# This exploits the 'multi-target pattern rule' trick.
# The syncconfig should be executed only once to make all the targets.
include/config/%.conf include/config/%.conf.cmd: $(KCONFIG_CONFIG)
- $(MAKE) $(kconfig) syncconfig
+ $(Q)$(MAKE) $(build)=tools/kconfig syncconfig
ifeq ($(CONFIG_DEBUG),y)
CFLAGS += -O1
$(MAKE) $(clean) arch/riscv
$(MAKE) $(clean) arch/x86
$(MAKE) $(clean) test
- $(MAKE) $(kconfig) clean
+ $(MAKE) $(clean) tools/kconfig
find . \( -name "*.o" -o -name ".*.d" -o -name ".*.d2" \
-o -name ".*.o.tmp" -o -name "*~" -o -name "core" \
+ -o -name '*.lex.c' -o -name '*.tab.[ch]' \
-o -name "*.gcno" -o -name ".*.cmd" -o -name "lib.a" \) -exec rm -f {} \;
rm -f include/asm $(TARGET) $(TARGET).gz $(TARGET).efi $(TARGET).efi.map $(TARGET)-syms $(TARGET)-syms.map *~ core
rm -f asm-offsets.s arch/*/include/asm/asm-offsets.h
nocov-y := $(addprefix $(obj)/,$(nocov-y))
noubsan-y := $(addprefix $(obj)/,$(noubsan-y))
+# Do not include hostprogs rules unless needed.
+# $(sort ...) is used here to remove duplicated words and excessive spaces.
+hostprogs-y := $(sort $(hostprogs-y))
+ifneq ($(hostprogs-y),)
+include scripts/Makefile.host
+endif
+
# subdir-builtin may contain duplications. Use $(sort ...)
subdir-builtin := $(sort $(filter %/built_in.o, $(obj-y)))
$(patsubst %$(strip $(1)),%$(sfx), \
$(filter %$(strip $(1)), $(targets))))
# %.init.o <- %.o
-targets += $(call intermediate_targets, .init.o, .o)
+# %.lex.o <- %.lex.c <- %.l
+# %.tab.o <- %.tab.[ch] <- %.y
+targets += $(call intermediate_targets, .init.o, .o) \
+ $(call intermediate_targets, .lex.o, .lex.c) \
+ $(call intermediate_targets, .tab.o, .tab.c .tab.h)
# Build
# ---------------------------------------------------------------------------
# Escape single quote for use in echo statements
escsq = $(subst $(squote),'\$(squote)',$1)
+###
+# Easy method for doing a status message
+ kecho := :
+ quiet_kecho := echo
+silent_kecho := :
+kecho := $($(quiet)kecho)
+
+###
+# filechk is used to check if the content of a generated file is updated.
+# Sample usage:
+#
+# filechk_sample = echo $(KERNELRELEASE)
+# version.h: FORCE
+# $(call filechk,sample)
+#
+# The rule defined shall write to stdout the content of the new file.
+# The existing file will be compared with the new one.
+# - If no file exist it is created
+# - If the content differ the new file is used
+# - If they are equal no change, and no timestamp update
+define filechk
+ $(Q)set -e; \
+ mkdir -p $(dir $@); \
+ trap "rm -f $(dot-target).tmp" EXIT; \
+ { $(filechk_$(1)); } > $(dot-target).tmp; \
+ if [ ! -r $@ ] || ! cmp -s $@ $(dot-target).tmp; then \
+ $(kecho) ' UPD $@'; \
+ mv -f $(dot-target).tmp $@; \
+ fi
+endef
+
# as-insn: Check whether assembler supports an instruction.
# Usage: cflags-y += $(call as-insn,CC FLAGS,"insn",option-yes,option-no)
as-insn = $(if $(shell echo 'void _(void) { asm volatile ( $(2) ); }' \
subdir-all := $(subdir-y) $(subdir-n) $(subdir-) \
$(patsubst %/,%, $(filter %/, $(obj-y) $(obj-n) $(obj-)))
+__clean-files := \
+ $(clean-files) $(hostprogs-y) $(hostprogs-)
+
+__clean-files := $(wildcard $(__clean-files))
+
.PHONY: clean
-clean:: $(subdir-all) ;
+clean:: $(subdir-all)
+ifneq ($(strip $(__clean-files)),)
+ rm -rf $(__clean-files)
+endif
+ @:
# Descending
# ---------------------------------------------------------------------------
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0
+
+# target with $(obj)/ and its suffix stripped
+target-stem = $(basename $(patsubst $(obj)/%,%,$@))
+
+# LEX
+# ---------------------------------------------------------------------------
+quiet_cmd_flex = LEX $@
+ cmd_flex = $(LEX) -o$@ -L $<
+
+$(obj)/%.lex.c: $(src)/%.l FORCE
+ $(call if_changed,flex)
+
+# YACC
+# ---------------------------------------------------------------------------
+quiet_cmd_bison = YACC $(basename $@).[ch]
+ cmd_bison = $(YACC) -o $(basename $@).c --defines=$(basename $@).h -t -l $<
+
+$(obj)/%.tab.c $(obj)/%.tab.h: $(src)/%.y FORCE
+ $(call if_changed,bison)
+
+# ==========================================================================
+# Building binaries on the host system
+# Binaries are used during the compilation of the kernel, for example
+# to preprocess a data file.
+#
+# Both C and C++ are supported, but preferred language is C for such utilities.
+#
+# Sample syntax (see Documentation/kbuild/makefiles.rst for reference)
+# hostprogs-y := bin2hex
+# Will compile bin2hex.c and create an executable named bin2hex
+#
+# hostprogs-y := lxdialog
+# lxdialog-objs := checklist.o lxdialog.o
+# Will compile lxdialog.c and checklist.c, and then link the executable
+# lxdialog, based on checklist.o and lxdialog.o
+#
+# hostprogs-y := qconf
+# qconf-cxxobjs := qconf.o
+# qconf-objs := menu.o
+# Will compile qconf as a C++ program, and menu as a C program.
+# They are linked as C++ code to the executable qconf
+
+__hostprogs := $(sort $(hostprogs-y) $(hostprogs-m))
+host-cshlib := $(sort $(hostlibs-y) $(hostlibs-m))
+host-cxxshlib := $(sort $(hostcxxlibs-y) $(hostcxxlibs-m))
+
+# C code
+# Executables compiled from a single .c file
+host-csingle := $(foreach m,$(__hostprogs), \
+ $(if $($(m)-objs)$($(m)-cxxobjs),,$(m)))
+
+# C executables linked based on several .o files
+host-cmulti := $(foreach m,$(__hostprogs),\
+ $(if $($(m)-cxxobjs),,$(if $($(m)-objs),$(m))))
+
+# Object (.o) files compiled from .c files
+host-cobjs := $(sort $(foreach m,$(__hostprogs),$($(m)-objs)))
+
+# C++ code
+# C++ executables compiled from at least one .cc file
+# and zero or more .c files
+host-cxxmulti := $(foreach m,$(__hostprogs),$(if $($(m)-cxxobjs),$(m)))
+
+# C++ Object (.o) files compiled from .cc files
+host-cxxobjs := $(sort $(foreach m,$(host-cxxmulti),$($(m)-cxxobjs)))
+
+# Object (.o) files used by the shared libaries
+host-cshobjs := $(sort $(foreach m,$(host-cshlib),$($(m:.so=-objs))))
+host-cxxshobjs := $(sort $(foreach m,$(host-cxxshlib),$($(m:.so=-objs))))
+
+host-csingle := $(addprefix $(obj)/,$(host-csingle))
+host-cmulti := $(addprefix $(obj)/,$(host-cmulti))
+host-cobjs := $(addprefix $(obj)/,$(host-cobjs))
+host-cxxmulti := $(addprefix $(obj)/,$(host-cxxmulti))
+host-cxxobjs := $(addprefix $(obj)/,$(host-cxxobjs))
+host-cshlib := $(addprefix $(obj)/,$(host-cshlib))
+host-cxxshlib := $(addprefix $(obj)/,$(host-cxxshlib))
+host-cshobjs := $(addprefix $(obj)/,$(host-cshobjs))
+host-cxxshobjs := $(addprefix $(obj)/,$(host-cxxshobjs))
+
+#####
+# Handle options to gcc. Support building with separate output directory
+
+_hostc_flags = $(KBUILD_HOSTCFLAGS) $(HOST_EXTRACFLAGS) \
+ $(HOSTCFLAGS_$(target-stem).o)
+_hostcxx_flags = $(KBUILD_HOSTCXXFLAGS) $(HOST_EXTRACXXFLAGS) \
+ $(HOSTCXXFLAGS_$(target-stem).o)
+
+# $(objtree)/$(obj) for including generated headers from checkin source files
+ifeq ($(KBUILD_EXTMOD),)
+ifdef building_out_of_srctree
+_hostc_flags += -I $(objtree)/$(obj)
+_hostcxx_flags += -I $(objtree)/$(obj)
+endif
+endif
+
+hostc_flags = -Wp,-MD,$(depfile) $(_hostc_flags)
+hostcxx_flags = -Wp,-MD,$(depfile) $(_hostcxx_flags)
+
+#####
+# Compile programs on the host
+
+# Create executable from a single .c file
+# host-csingle -> Executable
+quiet_cmd_host-csingle = HOSTCC $@
+ cmd_host-csingle = $(HOSTCC) $(hostc_flags) $(KBUILD_HOSTLDFLAGS) -o $@ $< \
+ $(KBUILD_HOSTLDLIBS) $(HOSTLDLIBS_$(target-stem))
+$(host-csingle): $(obj)/%: $(src)/%.c FORCE
+ $(call if_changed_dep,host-csingle)
+
+# Link an executable based on list of .o files, all plain c
+# host-cmulti -> executable
+quiet_cmd_host-cmulti = HOSTLD $@
+ cmd_host-cmulti = $(HOSTCC) $(KBUILD_HOSTLDFLAGS) -o $@ \
+ $(addprefix $(obj)/, $($(target-stem)-objs)) \
+ $(KBUILD_HOSTLDLIBS) $(HOSTLDLIBS_$(target-stem))
+$(host-cmulti): FORCE
+ $(call if_changed,host-cmulti)
+$(call multi-depend, $(host-cmulti), , -objs)
+
+# Create .o file from a single .c file
+# host-cobjs -> .o
+quiet_cmd_host-cobjs = HOSTCC $@
+ cmd_host-cobjs = $(HOSTCC) $(hostc_flags) -c -o $@ $<
+$(host-cobjs): $(obj)/%.o: $(src)/%.c FORCE
+ $(call if_changed_dep,host-cobjs)
+
+# Link an executable based on list of .o files, a mixture of .c and .cc
+# host-cxxmulti -> executable
+quiet_cmd_host-cxxmulti = HOSTLD $@
+ cmd_host-cxxmulti = $(HOSTCXX) $(KBUILD_HOSTLDFLAGS) -o $@ \
+ $(foreach o,objs cxxobjs,\
+ $(addprefix $(obj)/, $($(target-stem)-$(o)))) \
+ $(KBUILD_HOSTLDLIBS) $(HOSTLDLIBS_$(target-stem))
+$(host-cxxmulti): FORCE
+ $(call if_changed,host-cxxmulti)
+$(call multi-depend, $(host-cxxmulti), , -objs -cxxobjs)
+
+# Create .o file from a single .cc (C++) file
+quiet_cmd_host-cxxobjs = HOSTCXX $@
+ cmd_host-cxxobjs = $(HOSTCXX) $(hostcxx_flags) -c -o $@ $<
+$(host-cxxobjs): $(obj)/%.o: $(src)/%.cc FORCE
+ $(call if_changed_dep,host-cxxobjs)
+
+# Compile .c file, create position independent .o file
+# host-cshobjs -> .o
+quiet_cmd_host-cshobjs = HOSTCC -fPIC $@
+ cmd_host-cshobjs = $(HOSTCC) $(hostc_flags) -fPIC -c -o $@ $<
+$(host-cshobjs): $(obj)/%.o: $(src)/%.c FORCE
+ $(call if_changed_dep,host-cshobjs)
+
+# Compile .c file, create position independent .o file
+# Note that plugin capable gcc versions can be either C or C++ based
+# therefore plugin source files have to be compilable in both C and C++ mode.
+# This is why a C++ compiler is invoked on a .c file.
+# host-cxxshobjs -> .o
+quiet_cmd_host-cxxshobjs = HOSTCXX -fPIC $@
+ cmd_host-cxxshobjs = $(HOSTCXX) $(hostcxx_flags) -fPIC -c -o $@ $<
+$(host-cxxshobjs): $(obj)/%.o: $(src)/%.c FORCE
+ $(call if_changed_dep,host-cxxshobjs)
+
+# Link a shared library, based on position independent .o files
+# *.o -> .so shared library (host-cshlib)
+quiet_cmd_host-cshlib = HOSTLLD -shared $@
+ cmd_host-cshlib = $(HOSTCC) $(KBUILD_HOSTLDFLAGS) -shared -o $@ \
+ $(addprefix $(obj)/, $($(target-stem)-objs)) \
+ $(KBUILD_HOSTLDLIBS) $(HOSTLDLIBS_$(target-stem).so)
+$(host-cshlib): FORCE
+ $(call if_changed,host-cshlib)
+$(call multi-depend, $(host-cshlib), .so, -objs)
+
+# Link a shared library, based on position independent .o files
+# *.o -> .so shared library (host-cxxshlib)
+quiet_cmd_host-cxxshlib = HOSTLLD -shared $@
+ cmd_host-cxxshlib = $(HOSTCXX) $(KBUILD_HOSTLDFLAGS) -shared -o $@ \
+ $(addprefix $(obj)/, $($(target-stem)-objs)) \
+ $(KBUILD_HOSTLDLIBS) $(HOSTLDLIBS_$(target-stem).so)
+$(host-cxxshlib): FORCE
+ $(call if_changed,host-cxxshlib)
+$(call multi-depend, $(host-cxxshlib), .so, -objs)
+
+targets += $(host-csingle) $(host-cmulti) $(host-cobjs)\
+ $(host-cxxmulti) $(host-cxxobjs) $(host-cshlib) $(host-cshobjs) $(host-cxxshlib) $(host-cxxshobjs)
configfiles=$(wildcard $(srctree)/kernel/configs/$@ $(srctree)/arch/$(SRCARCH)/configs/$@)
+# Don't try to remake this file included by Config.mk.
+$(XEN_ROOT)/.config: ;
+
%.config: $(obj)/conf
$(if $(call configfiles),, $(error No configuration exists for this target on this architecture))
$(Q)$(CONFIG_SHELL) $(srctree)/tools/kconfig/merge_config.sh -m .config $(configfiles)
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0
-
-# LEX
-# ---------------------------------------------------------------------------
-quiet_cmd_flex = LEX $@
- cmd_flex = $(LEX) -o$@ -L $<
-
-$(obj)/%.lex.c: $(src)/%.l FORCE
- $(call if_changed,flex)
-
-# YACC
-# ---------------------------------------------------------------------------
-quiet_cmd_bison = YACC $(basename $@).[ch]
- cmd_bison = $(YACC) -o $(basename $@).c --defines=$(basename $@).h -t -l $<
-
-$(obj)/%.tab.c $(obj)/%.tab.h: $(src)/%.y FORCE
- $(call if_changed,bison)
-
-# ==========================================================================
-# Building binaries on the host system
-# Binaries are used during the compilation of the kernel, for example
-# to preprocess a data file.
-#
-# Both C and C++ are supported, but preferred language is C for such utilities.
-#
-# Sample syntax (see Documentation/kbuild/makefiles.rst for reference)
-# hostprogs-y := bin2hex
-# Will compile bin2hex.c and create an executable named bin2hex
-#
-# hostprogs-y := lxdialog
-# lxdialog-objs := checklist.o lxdialog.o
-# Will compile lxdialog.c and checklist.c, and then link the executable
-# lxdialog, based on checklist.o and lxdialog.o
-#
-# hostprogs-y := qconf
-# qconf-cxxobjs := qconf.o
-# qconf-objs := menu.o
-# Will compile qconf as a C++ program, and menu as a C program.
-# They are linked as C++ code to the executable qconf
-
-__hostprogs := $(sort $(hostprogs-y) $(hostprogs-m))
-host-cshlib := $(sort $(hostlibs-y) $(hostlibs-m))
-host-cxxshlib := $(sort $(hostcxxlibs-y) $(hostcxxlibs-m))
-
-# C code
-# Executables compiled from a single .c file
-host-csingle := $(foreach m,$(__hostprogs), \
- $(if $($(m)-objs)$($(m)-cxxobjs),,$(m)))
-
-# C executables linked based on several .o files
-host-cmulti := $(foreach m,$(__hostprogs),\
- $(if $($(m)-cxxobjs),,$(if $($(m)-objs),$(m))))
-
-# Object (.o) files compiled from .c files
-host-cobjs := $(sort $(foreach m,$(__hostprogs),$($(m)-objs)))
-
-# C++ code
-# C++ executables compiled from at least one .cc file
-# and zero or more .c files
-host-cxxmulti := $(foreach m,$(__hostprogs),$(if $($(m)-cxxobjs),$(m)))
-
-# C++ Object (.o) files compiled from .cc files
-host-cxxobjs := $(sort $(foreach m,$(host-cxxmulti),$($(m)-cxxobjs)))
-
-# Object (.o) files used by the shared libaries
-host-cshobjs := $(sort $(foreach m,$(host-cshlib),$($(m:.so=-objs))))
-host-cxxshobjs := $(sort $(foreach m,$(host-cxxshlib),$($(m:.so=-objs))))
-
-host-csingle := $(addprefix $(obj)/,$(host-csingle))
-host-cmulti := $(addprefix $(obj)/,$(host-cmulti))
-host-cobjs := $(addprefix $(obj)/,$(host-cobjs))
-host-cxxmulti := $(addprefix $(obj)/,$(host-cxxmulti))
-host-cxxobjs := $(addprefix $(obj)/,$(host-cxxobjs))
-host-cshlib := $(addprefix $(obj)/,$(host-cshlib))
-host-cxxshlib := $(addprefix $(obj)/,$(host-cxxshlib))
-host-cshobjs := $(addprefix $(obj)/,$(host-cshobjs))
-host-cxxshobjs := $(addprefix $(obj)/,$(host-cxxshobjs))
-
-#####
-# Handle options to gcc. Support building with separate output directory
-
-_hostc_flags = $(KBUILD_HOSTCFLAGS) $(HOST_EXTRACFLAGS) \
- $(HOSTCFLAGS_$(target-stem).o)
-_hostcxx_flags = $(KBUILD_HOSTCXXFLAGS) $(HOST_EXTRACXXFLAGS) \
- $(HOSTCXXFLAGS_$(target-stem).o)
-
-# $(objtree)/$(obj) for including generated headers from checkin source files
-ifeq ($(KBUILD_EXTMOD),)
-ifdef building_out_of_srctree
-_hostc_flags += -I $(objtree)/$(obj)
-_hostcxx_flags += -I $(objtree)/$(obj)
-endif
-endif
-
-hostc_flags = -Wp,-MD,$(depfile) $(_hostc_flags)
-hostcxx_flags = -Wp,-MD,$(depfile) $(_hostcxx_flags)
-
-#####
-# Compile programs on the host
-
-# Create executable from a single .c file
-# host-csingle -> Executable
-quiet_cmd_host-csingle = HOSTCC $@
- cmd_host-csingle = $(HOSTCC) $(hostc_flags) $(KBUILD_HOSTLDFLAGS) -o $@ $< \
- $(KBUILD_HOSTLDLIBS) $(HOSTLDLIBS_$(target-stem))
-$(host-csingle): $(obj)/%: $(src)/%.c FORCE
- $(call if_changed_dep,host-csingle)
-
-# Link an executable based on list of .o files, all plain c
-# host-cmulti -> executable
-quiet_cmd_host-cmulti = HOSTLD $@
- cmd_host-cmulti = $(HOSTCC) $(KBUILD_HOSTLDFLAGS) -o $@ \
- $(addprefix $(obj)/, $($(target-stem)-objs)) \
- $(KBUILD_HOSTLDLIBS) $(HOSTLDLIBS_$(target-stem))
-$(host-cmulti): FORCE
- $(call if_changed,host-cmulti)
-$(call multi_depend, $(host-cmulti), , -objs)
-
-# Create .o file from a single .c file
-# host-cobjs -> .o
-quiet_cmd_host-cobjs = HOSTCC $@
- cmd_host-cobjs = $(HOSTCC) $(hostc_flags) -c -o $@ $<
-$(host-cobjs): $(obj)/%.o: $(src)/%.c FORCE
- $(call if_changed_dep,host-cobjs)
-
-# Link an executable based on list of .o files, a mixture of .c and .cc
-# host-cxxmulti -> executable
-quiet_cmd_host-cxxmulti = HOSTLD $@
- cmd_host-cxxmulti = $(HOSTCXX) $(KBUILD_HOSTLDFLAGS) -o $@ \
- $(foreach o,objs cxxobjs,\
- $(addprefix $(obj)/, $($(target-stem)-$(o)))) \
- $(KBUILD_HOSTLDLIBS) $(HOSTLDLIBS_$(target-stem))
-$(host-cxxmulti): FORCE
- $(call if_changed,host-cxxmulti)
-$(call multi_depend, $(host-cxxmulti), , -objs -cxxobjs)
-
-# Create .o file from a single .cc (C++) file
-quiet_cmd_host-cxxobjs = HOSTCXX $@
- cmd_host-cxxobjs = $(HOSTCXX) $(hostcxx_flags) -c -o $@ $<
-$(host-cxxobjs): $(obj)/%.o: $(src)/%.cc FORCE
- $(call if_changed_dep,host-cxxobjs)
-
-# Compile .c file, create position independent .o file
-# host-cshobjs -> .o
-quiet_cmd_host-cshobjs = HOSTCC -fPIC $@
- cmd_host-cshobjs = $(HOSTCC) $(hostc_flags) -fPIC -c -o $@ $<
-$(host-cshobjs): $(obj)/%.o: $(src)/%.c FORCE
- $(call if_changed_dep,host-cshobjs)
-
-# Compile .c file, create position independent .o file
-# Note that plugin capable gcc versions can be either C or C++ based
-# therefore plugin source files have to be compilable in both C and C++ mode.
-# This is why a C++ compiler is invoked on a .c file.
-# host-cxxshobjs -> .o
-quiet_cmd_host-cxxshobjs = HOSTCXX -fPIC $@
- cmd_host-cxxshobjs = $(HOSTCXX) $(hostcxx_flags) -fPIC -c -o $@ $<
-$(host-cxxshobjs): $(obj)/%.o: $(src)/%.c FORCE
- $(call if_changed_dep,host-cxxshobjs)
-
-# Link a shared library, based on position independent .o files
-# *.o -> .so shared library (host-cshlib)
-quiet_cmd_host-cshlib = HOSTLLD -shared $@
- cmd_host-cshlib = $(HOSTCC) $(KBUILD_HOSTLDFLAGS) -shared -o $@ \
- $(addprefix $(obj)/, $($(target-stem)-objs)) \
- $(KBUILD_HOSTLDLIBS) $(HOSTLDLIBS_$(target-stem).so)
-$(host-cshlib): FORCE
- $(call if_changed,host-cshlib)
-$(call multi_depend, $(host-cshlib), .so, -objs)
-
-# Link a shared library, based on position independent .o files
-# *.o -> .so shared library (host-cxxshlib)
-quiet_cmd_host-cxxshlib = HOSTLLD -shared $@
- cmd_host-cxxshlib = $(HOSTCXX) $(KBUILD_HOSTLDFLAGS) -shared -o $@ \
- $(addprefix $(obj)/, $($(target-stem)-objs)) \
- $(KBUILD_HOSTLDLIBS) $(HOSTLDLIBS_$(target-stem).so)
-$(host-cxxshlib): FORCE
- $(call if_changed,host-cxxshlib)
-$(call multi_depend, $(host-cxxshlib), .so, -objs)
-
-targets += $(host-csingle) $(host-cmulti) $(host-cobjs)\
- $(host-cxxmulti) $(host-cxxobjs) $(host-cshlib) $(host-cshobjs) $(host-cxxshlib) $(host-cxxshobjs)
+++ /dev/null
-# xen/tools/kconfig
-
-# default rule to do nothing
-all:
-
-# Xen doesn't have a silent build flag
-quiet :=
-Q :=
-kecho := :
-
-# eventually you'll want to do out of tree builds
-srctree := $(BASEDIR)
-objtree := $(srctree)
-src := tools/kconfig
-obj := $(src)
-
-# handle functions (most of these lifted from different Linux makefiles
-dot-target = $(dir $@).$(notdir $@)
-depfile = $(subst $(comma),,$(dot-target).d)
-basetarget = $(basename $(notdir $@))
-# target with $(obj)/ and its suffix stripped
-target-stem = $(basename $(patsubst $(obj)/%,%,$@))
-cmd = $(cmd_$(1))
-if_changed = $(cmd_$(1))
-if_changed_dep = $(cmd_$(1))
-
-###
-# filechk is used to check if the content of a generated file is updated.
-# Sample usage:
-#
-# filechk_sample = echo $(KERNELRELEASE)
-# version.h: FORCE
-# $(call filechk,sample)
-#
-# The rule defined shall write to stdout the content of the new file.
-# The existing file will be compared with the new one.
-# - If no file exist it is created
-# - If the content differ the new file is used
-# - If they are equal no change, and no timestamp update
-# - stdin is piped in from the first prerequisite ($<) so one has
-# to specify a valid file as first prerequisite (often the kbuild file)
-define filechk
- $(Q)set -e; \
- mkdir -p $(dir $@); \
- { $(filechk_$(1)); } > $@.tmp; \
- if [ -r $@ ] && cmp -s $@ $@.tmp; then \
- rm -f $@.tmp; \
- else \
- $(kecho) ' UPD $@'; \
- mv -f $@.tmp $@; \
- fi
-endef
-
-define multi_depend
-$(foreach m, $(notdir $1), \
- $(eval $(obj)/$m: \
- $(addprefix $(obj)/, $(foreach s, $3, $($(m:%$(strip $2)=%$(s)))))))
-endef
-
-# Set our default defconfig file
-KBUILD_DEFCONFIG := $(ARCH)_defconfig
-
-# provide our shell
-CONFIG_SHELL := $(SHELL)
-
-# provide the host compiler
-HOSTCC ?= gcc
-HOSTCXX ?= g++
-YACC = $(if $(BISON),$(BISON),bison)
-LEX = $(if $(FLEX),$(FLEX),flex)
-
-# force target
-PHONY += FORCE
-
-FORCE:
-
-# include the original Makefile and Makefile.host from Linux
-include $(src)/Makefile
-include $(src)/Makefile.host
-
-# Add intermediate targets:
-# When building objects with specific suffix patterns, add intermediate
-# targets that the final targets are derived from.
-intermediate_targets = $(foreach sfx, $(2), \
- $(patsubst %$(strip $(1)),%$(sfx), \
- $(filter %$(strip $(1)), $(targets))))
-
-# %.lex.o <- %.lex.c <- %.l
-# %.tab.o <- %.tab.[ch] <- %.y
-targets += $(call intermediate_targets, .lex.o, .lex.c) \
- $(call intermediate_targets, .tab.o, .tab.c .tab.h)
-
-# clean up rule
-clean-deps = $(foreach f,$(host-cobjs) $(host-cxxobjs),$(dir $f).$(notdir $f).d)
-clean-shipped = $(patsubst %_shipped,%,$(wildcard $(obj)/*_shipped))
-
-clean:
- rm -rf $(clean-files)
- rm -rf $(clean-deps)
- rm -rf $(host-csingle) $(host-cmulti) $(host-cxxmulti) $(host-cobjs) $(host-cxxobjs)
- rm -rf $(clean-shipped)
-
-$(obj)/zconf%: $(src)/zconf%_shipped
- cp -f $< $@
-
-.PHONY: $(PHONY)
projects / people / royger / xen.git / commitdiff