qemu-img info should only be used directly if the format-specific
information or the name of the format is relevant (some tests explicitly
test format-specific information; test 082 uses qcow2-specific settings
to test the qemu-img interface); otherwise, tests should always use
_img_info instead.
Test 082 was touched only partially. It does test the qemu-img
interface; however, its invocations of qemu-img info are not real tests
but rather verifications, so if format-specific information is not
important for the test, there is no reason not to use _img_info. In
contrast to directly invoking qemu-img info, "qcow2" is replaced by
"IMGFMT"; but as "qcow2" is only mentioned once in test 082 (in
_supported_fmt), I consider this an improvement.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id:
1412105489-7681-2-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
echo
echo "=== Verify image created by Disk2VHD can be opened ==="
-$QEMU_IMG info "$TEST_IMG" 2>&1 | _filter_testdir | _filter_qemu
+_img_info
# success, all done
echo "*** done"
18 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
=== Verify image created by Disk2VHD can be opened ===
-image: TEST_DIR/test-disk2vhd.vhdx
-file format: vhdx
+image: TEST_DIR/test-disk2vhd.IMGFMT
+file format: IMGFMT
virtual size: 256M (268435456 bytes)
-disk size: 260M
cluster_size: 2097152
*** done
# Last -f should win
run_qemu_img create -f foo -f $IMGFMT "$TEST_IMG" $size
-run_qemu_img info "$TEST_IMG"
+_img_info
# Multiple -o should be merged
run_qemu_img create -f $IMGFMT -o cluster_size=4k -o lazy_refcounts=on "$TEST_IMG" $size
run_qemu_img create -f $IMGFMT -o cluster_size=4k -o lazy_refcounts=on -o cluster_size=8k "$TEST_IMG" $size
run_qemu_img info "$TEST_IMG"
run_qemu_img create -f $IMGFMT -o cluster_size=4k,cluster_size=8k "$TEST_IMG" $size
-run_qemu_img info "$TEST_IMG"
+_img_info
echo
echo === create: help for -o ===
# Last -f should win
run_qemu_img convert -f foo -f $IMGFMT "$TEST_IMG" "$TEST_IMG".base
-run_qemu_img info "$TEST_IMG".base
+TEST_IMG="${TEST_IMG}.base" _img_info
# Last -O should win
run_qemu_img convert -O foo -O $IMGFMT "$TEST_IMG" "$TEST_IMG".base
-run_qemu_img info "$TEST_IMG".base
+TEST_IMG="${TEST_IMG}.base" _img_info
# Multiple -o should be merged
run_qemu_img convert -O $IMGFMT -o cluster_size=4k -o lazy_refcounts=on "$TEST_IMG" "$TEST_IMG".base
run_qemu_img convert -O $IMGFMT -o cluster_size=4k -o lazy_refcounts=on -o cluster_size=8k "$TEST_IMG" "$TEST_IMG".base
run_qemu_img info "$TEST_IMG".base
run_qemu_img convert -O $IMGFMT -o cluster_size=4k,cluster_size=8k "$TEST_IMG" "$TEST_IMG".base
-run_qemu_img info "$TEST_IMG".base
+TEST_IMG="${TEST_IMG}.base" _img_info
echo
echo === convert: help for -o ===
run_qemu_img amend -f $IMGFMT -o size=8M -o lazy_refcounts=on -o size=132M "$TEST_IMG"
run_qemu_img info "$TEST_IMG"
run_qemu_img amend -f $IMGFMT -o size=4M,size=148M "$TEST_IMG"
-run_qemu_img info "$TEST_IMG"
+_img_info
echo
echo === amend: help for -o ===
Testing: create -f foo -f qcow2 TEST_DIR/t.qcow2 128M
Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=134217728 encryption=off cluster_size=65536 lazy_refcounts=off
-
-Testing: info TEST_DIR/t.qcow2
-image: TEST_DIR/t.qcow2
-file format: qcow2
+image: TEST_DIR/t.IMGFMT
+file format: IMGFMT
virtual size: 128M (134217728 bytes)
-disk size: 196K
cluster_size: 65536
-Format specific information:
- compat: 1.1
- lazy refcounts: false
Testing: create -f qcow2 -o cluster_size=4k -o lazy_refcounts=on TEST_DIR/t.qcow2 128M
Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=134217728 encryption=off cluster_size=4096 lazy_refcounts=on
Testing: create -f qcow2 -o cluster_size=4k,cluster_size=8k TEST_DIR/t.qcow2 128M
Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=134217728 encryption=off cluster_size=8192 lazy_refcounts=off
-
-Testing: info TEST_DIR/t.qcow2
-image: TEST_DIR/t.qcow2
-file format: qcow2
+image: TEST_DIR/t.IMGFMT
+file format: IMGFMT
virtual size: 128M (134217728 bytes)
-disk size: 28K
cluster_size: 8192
-Format specific information:
- compat: 1.1
- lazy refcounts: false
=== create: help for -o ===
Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=134217728 encryption=off cluster_size=65536 lazy_refcounts=off
Testing: convert -f foo -f qcow2 TEST_DIR/t.qcow2 TEST_DIR/t.qcow2.base
-
-Testing: info TEST_DIR/t.qcow2.base
-image: TEST_DIR/t.qcow2.base
+image: TEST_DIR/t.IMGFMT.base
file format: raw
virtual size: 128M (134217728 bytes)
-disk size: 0
Testing: convert -O foo -O qcow2 TEST_DIR/t.qcow2 TEST_DIR/t.qcow2.base
-
-Testing: info TEST_DIR/t.qcow2.base
-image: TEST_DIR/t.qcow2.base
-file format: qcow2
+image: TEST_DIR/t.IMGFMT.base
+file format: IMGFMT
virtual size: 128M (134217728 bytes)
-disk size: 196K
cluster_size: 65536
-Format specific information:
- compat: 1.1
- lazy refcounts: false
Testing: convert -O qcow2 -o cluster_size=4k -o lazy_refcounts=on TEST_DIR/t.qcow2 TEST_DIR/t.qcow2.base
lazy refcounts: true
Testing: convert -O qcow2 -o cluster_size=4k,cluster_size=8k TEST_DIR/t.qcow2 TEST_DIR/t.qcow2.base
-
-Testing: info TEST_DIR/t.qcow2.base
-image: TEST_DIR/t.qcow2.base
-file format: qcow2
+image: TEST_DIR/t.IMGFMT.base
+file format: IMGFMT
virtual size: 128M (134217728 bytes)
-disk size: 28K
cluster_size: 8192
-Format specific information:
- compat: 1.1
- lazy refcounts: false
=== convert: help for -o ===
lazy refcounts: true
Testing: amend -f qcow2 -o size=4M,size=148M TEST_DIR/t.qcow2
-
-Testing: info TEST_DIR/t.qcow2
-image: TEST_DIR/t.qcow2
-file format: qcow2
+image: TEST_DIR/t.IMGFMT
+file format: IMGFMT
virtual size: 148M (155189248 bytes)
-disk size: 196K
cluster_size: 65536
-Format specific information:
- compat: 1.1
- lazy refcounts: true
=== amend: help for -o ===
echo
echo "=== Base image info before commit and resize ==="
-$QEMU_IMG info "${TEST_IMG}.base" | _filter_testdir
+TEST_IMG="${TEST_IMG}.base" _img_info
echo
echo === Running QEMU Live Commit Test ===
echo
echo "=== Base image info after commit and resize ==="
-$QEMU_IMG info "${TEST_IMG}.base" | _filter_testdir
+TEST_IMG="${TEST_IMG}.base" _img_info
# success, all done
echo "*** done"
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=104857600 backing_file='TEST_DIR/t.IMGFMT.snp1'
=== Base image info before commit and resize ===
-image: TEST_DIR/t.qcow2.base
-file format: qcow2
+image: TEST_DIR/t.IMGFMT.base
+file format: IMGFMT
virtual size: 5.0M (5242880 bytes)
-disk size: 196K
cluster_size: 65536
-Format specific information:
- compat: 1.1
- lazy refcounts: false
=== Running QEMU Live Commit Test ===
{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "BLOCK_JOB_COMPLETED", "data": {"device": "test", "len": 104857600, "offset": 104857600, "speed": 0, "type": "commit"}}
=== Base image info after commit and resize ===
-image: TEST_DIR/t.qcow2.base
-file format: qcow2
+image: TEST_DIR/t.IMGFMT.base
+file format: IMGFMT
virtual size: 100M (104857600 bytes)
-disk size: 196K
cluster_size: 65536
-Format specific information:
- compat: 1.1
- lazy refcounts: false
*** done