]> xenbits.xensource.com Git - people/royger/xen.git/commitdiff
xen/arm: domain_build: Check if the address fits the range of physical address
authorAyan Kumar Halder <ayan.kumar.halder@amd.com>
Thu, 18 May 2023 14:39:14 +0000 (15:39 +0100)
committerJulien Grall <jgrall@amazon.com>
Fri, 26 May 2023 12:13:19 +0000 (13:13 +0100)
handle_pci_range() and map_range_to_domain() take addr and len as uint64_t
parameters. Then frame numbers are obtained from addr and len by right shifting
with PAGE_SHIFT. The frame numbers are expressed using unsigned long.

Now if 64-bit >> PAGE_SHIFT, the result will have 52-bits as valid. On a 32-bit
system, 'unsigned long' is 32-bits. Thus, there is a potential loss of value
when the result is stored as 'unsigned long'.

To mitigate this issue, we check if the starting and end address can be
contained within the range of physical address supported on the system. If not,
then an appropriate error is returned.

Signed-off-by: Ayan Kumar Halder <ayan.kumar.halder@amd.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Michal Orzel <michal.orzel@amd.com>
xen/arch/arm/domain_build.c

index 50b85ea783ac43c089d425512cb05868fa30d4a8..cb23f531a8b6be26b09ea9b9695b6f3e74282271 100644 (file)
@@ -1643,6 +1643,13 @@ static int __init handle_pci_range(const struct dt_device_node *dev,
     paddr_t start, end;
     int res;
 
+    if ( (addr != (paddr_t)addr) || (((paddr_t)~0 - addr) < len) )
+    {
+        printk(XENLOG_ERR "%s: [0x%"PRIx64", 0x%"PRIx64"] exceeds the maximum allowed PA width (%u bits)",
+               dt_node_full_name(dev), addr, (addr + len), PADDR_BITS);
+        return -ERANGE;
+    }
+
     start = addr & PAGE_MASK;
     end = PAGE_ALIGN(addr + len);
     res = rangeset_remove_range(mem_holes, PFN_DOWN(start), PFN_DOWN(end - 1));
@@ -2333,6 +2340,13 @@ int __init map_range_to_domain(const struct dt_device_node *dev,
     struct domain *d = mr_data->d;
     int res;
 
+    if ( (addr != (paddr_t)addr) || (((paddr_t)~0 - addr) < len) )
+    {
+        printk(XENLOG_ERR "%s: [0x%"PRIx64", 0x%"PRIx64"] exceeds the maximum allowed PA width (%u bits)",
+               dt_node_full_name(dev), addr, (addr + len), PADDR_BITS);
+        return -ERANGE;
+    }
+
     /*
      * reserved-memory regions are RAM carved out for a special purpose.
      * They are not MMIO and therefore a domain should not be able to