hwmon: (pmbus) remove redundant 'default n' from Kconfig

'default n' is the default value for any bool or tristate Kconfig
setting so there is no need to write it explicitly.

Also since commit f467c5640c29 ("kconfig: only write '# CONFIG_FOO
is not set' for visible symbols") the Kconfig behavior is the same
regardless of 'default n' being present or not:

    ...
    One side effect of (and the main motivation for) this change is making
    the following two definitions behave exactly the same:

        config FOO
                bool

        config FOO
                bool
                default n

    With this change, neither of these will generate a
    '# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied).
    That might make it clearer to people that a bare 'default n' is
    redundant.
    ...

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index 9cdb71baeda443006911465a1678d4af8e93251e..629cb45f8557a0dd936b0827056fb08c30ddd4e7 100644 (file)
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -5,7 +5,6 @@
 menuconfig PMBUS
        tristate "PMBus support"
        depends on I2C
-       default n
        help
          Say yes here if you want to enable PMBus support.
 
@@ -28,7 +27,6 @@ config SENSORS_PMBUS
 
 config SENSORS_ADM1275
        tristate "Analog Devices ADM1275 and compatibles"
-       default n
        help
          If you say yes here you get hardware monitoring support for Analog
          Devices ADM1075, ADM1272, ADM1275, ADM1276, ADM1278, ADM1293,
@@ -49,7 +47,6 @@ config SENSORS_IBM_CFFPS
 
 config SENSORS_IR35221
        tristate "Infineon IR35221"
-       default n
        help
          If you say yes here you get hardware monitoring support for the
          Infineon IR35221 controller.
@@ -59,7 +56,6 @@ config SENSORS_IR35221
 
 config SENSORS_LM25066
        tristate "National Semiconductor LM25066 and compatibles"
-       default n
        help
          If you say yes here you get hardware monitoring support for National
          Semiconductor LM25056, LM25066, LM5064, and LM5066.
@@ -69,7 +65,6 @@ config SENSORS_LM25066
 
 config SENSORS_LTC2978
        tristate "Linear Technologies LTC2978 and compatibles"
-       default n
        help
          If you say yes here you get hardware monitoring support for Linear
          Technology LTC2974, LTC2975, LTC2977, LTC2978, LTC2980, LTC3880,
@@ -88,7 +83,6 @@ config SENSORS_LTC2978_REGULATOR
 
 config SENSORS_LTC3815
        tristate "Linear Technologies LTC3815"
-       default n
        help
          If you say yes here you get hardware monitoring support for Linear
          Technology LTC3815.
@@ -98,7 +92,6 @@ config SENSORS_LTC3815
 
 config SENSORS_MAX16064
        tristate "Maxim MAX16064"
-       default n
        help
          If you say yes here you get hardware monitoring support for Maxim
          MAX16064.
@@ -108,7 +101,6 @@ config SENSORS_MAX16064
 
 config SENSORS_MAX20751
        tristate "Maxim MAX20751"
-       default n
        help
          If you say yes here you get hardware monitoring support for Maxim
          MAX20751.
@@ -118,7 +110,6 @@ config SENSORS_MAX20751
 
 config SENSORS_MAX31785
        tristate "Maxim MAX31785 and compatibles"
-       default n
        help
          If you say yes here you get hardware monitoring support for Maxim
          MAX31785.
@@ -128,7 +119,6 @@ config SENSORS_MAX31785
 
 config SENSORS_MAX34440
        tristate "Maxim MAX34440 and compatibles"
-       default n
        help
          If you say yes here you get hardware monitoring support for Maxim
          MAX34440, MAX34441, MAX34446, MAX34451, MAX34460, and MAX34461.
@@ -138,7 +128,6 @@ config SENSORS_MAX34440
 
 config SENSORS_MAX8688
        tristate "Maxim MAX8688"
-       default n
        help
          If you say yes here you get hardware monitoring support for Maxim
          MAX8688.
@@ -148,7 +137,6 @@ config SENSORS_MAX8688
 
 config SENSORS_TPS40422
        tristate "TI TPS40422"
-       default n
        help
          If you say yes here you get hardware monitoring support for TI
          TPS40422.
@@ -167,7 +155,6 @@ config SENSORS_TPS53679
 
 config SENSORS_UCD9000
        tristate "TI UCD90120, UCD90124, UCD90160, UCD9090, UCD90910"
-       default n
        help
          If you say yes here you get hardware monitoring support for TI
          UCD90120, UCD90124, UCD90160, UCD9090, UCD90910, Sequencer and System
@@ -178,7 +165,6 @@ config SENSORS_UCD9000
 
 config SENSORS_UCD9200
        tristate "TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, UCD9248"
-       default n
        help
          If you say yes here you get hardware monitoring support for TI
          UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248
@@ -189,7 +175,6 @@ config SENSORS_UCD9200
 
 config SENSORS_ZL6100
        tristate "Intersil ZL6100 and compatibles"
-       default n
        help
          If you say yes here you get hardware monitoring support for Intersil
          ZL2004, ZL2005, ZL2006, ZL2008, ZL2105, ZL2106, ZL6100, ZL6105,