arm: gic-v3: deactivate interrupts during initialization

On i.MX8, we implemented partition reboot which means Cortex-A reboot
will not impact M4 cores and System control Unit core. However GICv3 is
not reset because we also need to support A72 Cluster reboot without
affecting A53 Cluster.

The gic-v3 controller is configured with EOImode to 1, so during xen
reboot, there is a function call "smp_call_function(halt_this_cpu, NULL, 0);"
but halt_this_cpu never returns, that means other CPUs have no chance to
deactivate the SGI interrupt, because the deactivate_irq operation is at
the end of do_sgi. During the next boot of Xen, CPU0 will issue
GIC_SGI_CALL_FUNCTION to other CPUs. As the Active state for SGI is left
untouched during the reboot, the GIC_SGI_CALL_FUNCTION will still be active
on the non-boot CPUs. This means the interrupt cannot be triggered again
until it get deactivated.

And according to IHI0069D_gic_architecture_specification, chapter
"8.11.3 GICR_ICACTIVER0, Interrupt Clear-Active Register 0", the RW
field of GICR_ICACTIVER0 resets to a value that is architecturally UNKNOWN.
So make sure all interrupts are deactivated during initialization by
clearing the state.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>

diff --git a/xen/arch/arm/gic-v3.c b/xen/arch/arm/gic-v3.c
index c9200d24e18f79a740e9c271a91a9e38c7afc353..0f6cbf6224e94c6755e701be62625362eca511d7 100644 (file)
--- a/xen/arch/arm/gic-v3.c
+++ b/xen/arch/arm/gic-v3.c
@@ -626,9 +626,12 @@ static void __init gicv3_dist_init(void)
         writel_relaxed(priority, GICD + GICD_IPRIORITYR + (i / 4) * 4);
     }
 
-    /* Disable all global interrupts */
+    /* Disable/deactivate all global interrupts */
     for ( i = NR_GIC_LOCAL_IRQS; i < nr_lines; i += 32 )
+    {
         writel_relaxed(0xffffffff, GICD + GICD_ICENABLER + (i / 32) * 4);
+        writel_relaxed(0xffffffff, GICD + GICD_ICACTIVER + (i / 32) * 4);
+    }
 
     /*
      * Configure SPIs as non-secure Group-1. This will only matter
@@ -834,6 +837,11 @@ static int gicv3_cpu_init(void)
         writel_relaxed(priority,
                 GICD_RDIST_SGI_BASE + GICR_IPRIORITYR0 + (i / 4) * 4);
 
+    /*
+     * The activate state is unknown at boot, so make sure all
+     * SGIs and PPIs are de-activated.
+     */
+    writel_relaxed(0xffffffff, GICD_RDIST_SGI_BASE + GICR_ICACTIVER0);
     /*
      * Disable all PPI interrupts, ensure all SGI interrupts are
      * enabled.