#include "qemu/module.h"
#include "sysemu/block-backend.h"
#include "sysemu/dma.h"
-#include "hw/ide/internal.h"
#include "hw/ide/pci.h"
#include "hw/ide/ahci-pci.h"
#include "hw/ide/ahci-sysbus.h"
#include "ahci_internal.h"
+#include "ide-internal.h"
#include "trace.h"
#define HW_IDE_AHCI_INTERNAL_H
#include "hw/ide/ahci.h"
-#include "hw/ide/internal.h"
#include "hw/pci/pci_device.h"
+#include "ide-internal.h"
#define AHCI_MEM_BAR_SIZE 0x1000
#define AHCI_MAX_PORTS 32
*/
#include "qemu/osdep.h"
-#include "hw/ide/internal.h"
#include "hw/scsi/scsi.h"
#include "sysemu/block-backend.h"
#include "scsi/constants.h"
+#include "ide-internal.h"
#include "trace.h"
#define ATAPI_SECTOR_BITS (2 + BDRV_SECTOR_BITS)
#include "sysemu/reset.h"
#include "hw/ide/pci.h"
-#include "hw/ide/internal.h"
+#include "ide-internal.h"
#include "trace.h"
/* CMD646 specific */
#include "qemu/cutils.h"
#include "sysemu/replay.h"
#include "sysemu/runstate.h"
-#include "hw/ide/internal.h"
+#include "ide-internal.h"
#include "trace.h"
/* These values were based on a Seagate ST3500418AS but have been modified
#include "qapi/error.h"
#include "qemu/error-report.h"
#include "qemu/module.h"
-#include "hw/ide/internal.h"
#include "sysemu/block-backend.h"
#include "sysemu/blockdev.h"
#include "sysemu/runstate.h"
+#include "ide-internal.h"
static char *idebus_get_fw_dev_path(DeviceState *dev);
static void idebus_unrealize(BusState *qdev);
#include "qemu/error-report.h"
#include "qemu/module.h"
#include "hw/ide/ide-dev.h"
-#include "hw/ide/internal.h"
#include "sysemu/block-backend.h"
#include "sysemu/blockdev.h"
#include "sysemu/sysemu.h"
#include "qapi/visitor.h"
+#include "ide-internal.h"
static Property ide_props[] = {
DEFINE_PROP_UINT32("unit", IDEDevice, unit, -1),
--- /dev/null
+#ifndef HW_IDE_INTERNAL_H
+#define HW_IDE_INTERNAL_H
+
+/*
+ * QEMU IDE Emulation -- internal header file
+ * only files in hw/ide/ are supposed to include this file.
+ * non-internal declarations are in hw/include/ide-*.h
+ */
+
+#include "hw/ide/ide-bus.h"
+
+/* debug IDE devices */
+#define USE_DMA_CDROM
+
+/* Device/Head ("select") Register */
+#define ATA_DEV_SELECT 0x10
+/* ATA1,3: Defined as '1'.
+ * ATA2: Reserved.
+ * ATA3-7: obsolete. */
+#define ATA_DEV_ALWAYS_ON 0xA0
+#define ATA_DEV_LBA 0x40
+#define ATA_DEV_LBA_MSB 0x0F /* LBA 24:27 */
+#define ATA_DEV_HS 0x0F /* HS 3:0 */
+
+
+/* Bits of HD_STATUS */
+#define ERR_STAT 0x01
+#define INDEX_STAT 0x02
+#define ECC_STAT 0x04 /* Corrected error */
+#define DRQ_STAT 0x08
+#define SEEK_STAT 0x10
+#define SRV_STAT 0x10
+#define WRERR_STAT 0x20
+#define READY_STAT 0x40
+#define BUSY_STAT 0x80
+
+/* Bits for HD_ERROR */
+#define MARK_ERR 0x01 /* Bad address mark */
+#define TRK0_ERR 0x02 /* couldn't find track 0 */
+#define ABRT_ERR 0x04 /* Command aborted */
+#define MCR_ERR 0x08 /* media change request */
+#define ID_ERR 0x10 /* ID field not found */
+#define MC_ERR 0x20 /* media changed */
+#define ECC_ERR 0x40 /* Uncorrectable ECC error */
+#define BBD_ERR 0x80 /* pre-EIDE meaning: block marked bad */
+#define ICRC_ERR 0x80 /* new meaning: CRC error during transfer */
+
+/* Bits of HD_NSECTOR */
+#define CD 0x01
+#define IO 0x02
+#define REL 0x04
+#define TAG_MASK 0xf8
+
+/* Bits of Device Control register */
+#define IDE_CTRL_HOB 0x80
+#define IDE_CTRL_RESET 0x04
+#define IDE_CTRL_DISABLE_IRQ 0x02
+
+/* ACS-2 T13/2015-D Table B.2 Command codes */
+#define WIN_NOP 0x00
+/* reserved 0x01..0x02 */
+#define CFA_REQ_EXT_ERROR_CODE 0x03 /* CFA Request Extended Error Code */
+/* reserved 0x04..0x05 */
+#define WIN_DSM 0x06
+/* reserved 0x07 */
+#define WIN_DEVICE_RESET 0x08
+/* reserved 0x09..0x0a */
+/* REQUEST SENSE DATA EXT 0x0B */
+/* reserved 0x0C..0x0F */
+#define WIN_RECAL 0x10 /* obsolete since ATA4 */
+/* obsolete since ATA3, retired in ATA4 0x11..0x1F */
+#define WIN_READ 0x20 /* 28-Bit */
+#define WIN_READ_ONCE 0x21 /* 28-Bit w/o retries, obsolete since ATA5 */
+/* obsolete since ATA4 0x22..0x23 */
+#define WIN_READ_EXT 0x24 /* 48-Bit */
+#define WIN_READDMA_EXT 0x25 /* 48-Bit */
+#define WIN_READDMA_QUEUED_EXT 0x26 /* 48-Bit, obsolete since ACS2 */
+#define WIN_READ_NATIVE_MAX_EXT 0x27 /* 48-Bit */
+/* reserved 0x28 */
+#define WIN_MULTREAD_EXT 0x29 /* 48-Bit */
+/* READ STREAM DMA EXT 0x2A */
+/* READ STREAM EXT 0x2B */
+/* reserved 0x2C..0x2E */
+/* READ LOG EXT 0x2F */
+#define WIN_WRITE 0x30 /* 28-Bit */
+#define WIN_WRITE_ONCE 0x31 /* 28-Bit w/o retries, obsolete since ATA5 */
+/* obsolete since ATA4 0x32..0x33 */
+#define WIN_WRITE_EXT 0x34 /* 48-Bit */
+#define WIN_WRITEDMA_EXT 0x35 /* 48-Bit */
+#define WIN_WRITEDMA_QUEUED_EXT 0x36 /* 48-Bit */
+#define WIN_SET_MAX_EXT 0x37 /* 48-Bit, obsolete since ACS2 */
+#define WIN_SET_MAX_EXT 0x37 /* 48-Bit */
+#define CFA_WRITE_SECT_WO_ERASE 0x38 /* CFA Write Sectors without erase */
+#define WIN_MULTWRITE_EXT 0x39 /* 48-Bit */
+/* WRITE STREAM DMA EXT 0x3A */
+/* WRITE STREAM EXT 0x3B */
+#define WIN_WRITE_VERIFY 0x3C /* 28-Bit, obsolete since ATA4 */
+/* WRITE DMA FUA EXT 0x3D */
+/* obsolete since ACS2 0x3E */
+/* WRITE LOG EXT 0x3F */
+#define WIN_VERIFY 0x40 /* 28-Bit - Read Verify Sectors */
+#define WIN_VERIFY_ONCE 0x41 /* 28-Bit - w/o retries, obsolete since ATA5 */
+#define WIN_VERIFY_EXT 0x42 /* 48-Bit */
+/* reserved 0x43..0x44 */
+/* WRITE UNCORRECTABLE EXT 0x45 */
+/* reserved 0x46 */
+/* READ LOG DMA EXT 0x47 */
+/* reserved 0x48..0x4F */
+/* obsolete since ATA4 0x50 */
+/* CONFIGURE STREAM 0x51 */
+/* reserved 0x52..0x56 */
+/* WRITE LOG DMA EXT 0x57 */
+/* reserved 0x58..0x5A */
+/* TRUSTED NON DATA 0x5B */
+/* TRUSTED RECEIVE 0x5C */
+/* TRUSTED RECEIVE DMA 0x5D */
+/* TRUSTED SEND 0x5E */
+/* TRUSTED SEND DMA 0x5F */
+/* READ FPDMA QUEUED 0x60 */
+/* WRITE FPDMA QUEUED 0x61 */
+/* reserved 0x62->0x6F */
+#define WIN_SEEK 0x70 /* obsolete since ATA7 */
+/* reserved 0x71-0x7F */
+/* vendor specific 0x80-0x86 */
+#define CFA_TRANSLATE_SECTOR 0x87 /* CFA Translate Sector */
+/* vendor specific 0x88-0x8F */
+#define WIN_DIAGNOSE 0x90
+#define WIN_SPECIFY 0x91 /* set drive geometry translation, obsolete since ATA6 */
+#define WIN_DOWNLOAD_MICROCODE 0x92
+/* DOWNLOAD MICROCODE DMA 0x93 */
+#define WIN_STANDBYNOW2 0x94 /* retired in ATA4 */
+#define WIN_IDLEIMMEDIATE2 0x95 /* force drive to become "ready", retired in ATA4 */
+#define WIN_STANDBY2 0x96 /* retired in ATA4 */
+#define WIN_SETIDLE2 0x97 /* retired in ATA4 */
+#define WIN_CHECKPOWERMODE2 0x98 /* retired in ATA4 */
+#define WIN_SLEEPNOW2 0x99 /* retired in ATA4 */
+/* vendor specific 0x9A */
+/* reserved 0x9B..0x9F */
+#define WIN_PACKETCMD 0xA0 /* Send a packet command. */
+#define WIN_PIDENTIFY 0xA1 /* identify ATAPI device */
+#define WIN_QUEUED_SERVICE 0xA2 /* obsolete since ACS2 */
+/* reserved 0xA3..0xAF */
+#define WIN_SMART 0xB0 /* self-monitoring and reporting */
+/* Device Configuration Overlay 0xB1 */
+/* reserved 0xB2..0xB3 */
+/* Sanitize Device 0xB4 */
+/* reserved 0xB5 */
+/* NV Cache 0xB6 */
+/* reserved for CFA 0xB7..0xBB */
+#define CFA_ACCESS_METADATA_STORAGE 0xB8
+/* reserved 0xBC..0xBF */
+#define CFA_ERASE_SECTORS 0xC0 /* microdrives implement as NOP */
+/* vendor specific 0xC1..0xC3 */
+#define WIN_MULTREAD 0xC4 /* read sectors using multiple mode*/
+#define WIN_MULTWRITE 0xC5 /* write sectors using multiple mode */
+#define WIN_SETMULT 0xC6 /* enable/disable multiple mode */
+#define WIN_READDMA_QUEUED 0xC7 /* read sectors using Queued DMA transfers, obsolete since ACS2 */
+#define WIN_READDMA 0xC8 /* read sectors using DMA transfers */
+#define WIN_READDMA_ONCE 0xC9 /* 28-Bit - w/o retries, obsolete since ATA5 */
+#define WIN_WRITEDMA 0xCA /* write sectors using DMA transfers */
+#define WIN_WRITEDMA_ONCE 0xCB /* 28-Bit - w/o retries, obsolete since ATA5 */
+#define WIN_WRITEDMA_QUEUED 0xCC /* write sectors using Queued DMA transfers, obsolete since ACS2 */
+#define CFA_WRITE_MULTI_WO_ERASE 0xCD /* CFA Write multiple without erase */
+/* WRITE MULTIPLE FUA EXT 0xCE */
+/* reserved 0xCF..0xDO */
+/* CHECK MEDIA CARD TYPE 0xD1 */
+/* reserved for media card pass through 0xD2..0xD4 */
+/* reserved 0xD5..0xD9 */
+#define WIN_GETMEDIASTATUS 0xDA /* obsolete since ATA8 */
+/* obsolete since ATA3, retired in ATA4 0xDB..0xDD */
+#define WIN_DOORLOCK 0xDE /* lock door on removable drives, obsolete since ATA8 */
+#define WIN_DOORUNLOCK 0xDF /* unlock door on removable drives, obsolete since ATA8 */
+#define WIN_STANDBYNOW1 0xE0
+#define WIN_IDLEIMMEDIATE 0xE1 /* force drive to become "ready" */
+#define WIN_STANDBY 0xE2 /* Set device in Standby Mode */
+#define WIN_SETIDLE1 0xE3
+#define WIN_READ_BUFFER 0xE4 /* force read only 1 sector */
+#define WIN_CHECKPOWERMODE1 0xE5
+#define WIN_SLEEPNOW1 0xE6
+#define WIN_FLUSH_CACHE 0xE7
+#define WIN_WRITE_BUFFER 0xE8 /* force write only 1 sector */
+/* READ BUFFER DMA 0xE9 */
+#define WIN_FLUSH_CACHE_EXT 0xEA /* 48-Bit */
+/* WRITE BUFFER DMA 0xEB */
+#define WIN_IDENTIFY 0xEC /* ask drive to identify itself */
+#define WIN_MEDIAEJECT 0xED /* obsolete since ATA8 */
+/* obsolete since ATA4 0xEE */
+#define WIN_SETFEATURES 0xEF /* set special drive features */
+#define IBM_SENSE_CONDITION 0xF0 /* measure disk temperature, vendor specific */
+#define WIN_SECURITY_SET_PASS 0xF1
+#define WIN_SECURITY_UNLOCK 0xF2
+#define WIN_SECURITY_ERASE_PREPARE 0xF3
+#define WIN_SECURITY_ERASE_UNIT 0xF4
+#define WIN_SECURITY_FREEZE_LOCK 0xF5
+#define CFA_WEAR_LEVEL 0xF5 /* microdrives implement as NOP; not specified in T13! */
+#define WIN_SECURITY_DISABLE 0xF6
+/* vendor specific 0xF7 */
+#define WIN_READ_NATIVE_MAX 0xF8 /* return the native maximum address */
+#define WIN_SET_MAX 0xF9
+/* vendor specific 0xFA..0xFF */
+
+/* set to 1 set disable mult support */
+#define MAX_MULT_SECTORS 16
+
+#define IDE_DMA_BUF_SECTORS 256
+
+/* feature values for Data Set Management */
+#define DSM_TRIM 0x01
+
+#if (IDE_DMA_BUF_SECTORS < MAX_MULT_SECTORS)
+#error "IDE_DMA_BUF_SECTORS must be bigger or equal to MAX_MULT_SECTORS"
+#endif
+
+/* ATAPI defines */
+
+#define ATAPI_PACKET_SIZE 12
+
+/* The generic packet command opcodes for CD/DVD Logical Units,
+ * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
+#define GPCMD_BLANK 0xa1
+#define GPCMD_CLOSE_TRACK 0x5b
+#define GPCMD_FLUSH_CACHE 0x35
+#define GPCMD_FORMAT_UNIT 0x04
+#define GPCMD_GET_CONFIGURATION 0x46
+#define GPCMD_GET_EVENT_STATUS_NOTIFICATION 0x4a
+#define GPCMD_GET_PERFORMANCE 0xac
+#define GPCMD_INQUIRY 0x12
+#define GPCMD_LOAD_UNLOAD 0xa6
+#define GPCMD_MECHANISM_STATUS 0xbd
+#define GPCMD_MODE_SELECT_10 0x55
+#define GPCMD_MODE_SENSE_10 0x5a
+#define GPCMD_PAUSE_RESUME 0x4b
+#define GPCMD_PLAY_AUDIO_10 0x45
+#define GPCMD_PLAY_AUDIO_MSF 0x47
+#define GPCMD_PLAY_AUDIO_TI 0x48
+#define GPCMD_PLAY_CD 0xbc
+#define GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1e
+#define GPCMD_READ_10 0x28
+#define GPCMD_READ_12 0xa8
+#define GPCMD_READ_CDVD_CAPACITY 0x25
+#define GPCMD_READ_CD 0xbe
+#define GPCMD_READ_CD_MSF 0xb9
+#define GPCMD_READ_DISC_INFO 0x51
+#define GPCMD_READ_DVD_STRUCTURE 0xad
+#define GPCMD_READ_FORMAT_CAPACITIES 0x23
+#define GPCMD_READ_HEADER 0x44
+#define GPCMD_READ_TRACK_RZONE_INFO 0x52
+#define GPCMD_READ_SUBCHANNEL 0x42
+#define GPCMD_READ_TOC_PMA_ATIP 0x43
+#define GPCMD_REPAIR_RZONE_TRACK 0x58
+#define GPCMD_REPORT_KEY 0xa4
+#define GPCMD_REQUEST_SENSE 0x03
+#define GPCMD_RESERVE_RZONE_TRACK 0x53
+#define GPCMD_SCAN 0xba
+#define GPCMD_SEEK 0x2b
+#define GPCMD_SEND_DVD_STRUCTURE 0xad
+#define GPCMD_SEND_EVENT 0xa2
+#define GPCMD_SEND_KEY 0xa3
+#define GPCMD_SEND_OPC 0x54
+#define GPCMD_SET_READ_AHEAD 0xa7
+#define GPCMD_SET_STREAMING 0xb6
+#define GPCMD_START_STOP_UNIT 0x1b
+#define GPCMD_STOP_PLAY_SCAN 0x4e
+#define GPCMD_TEST_UNIT_READY 0x00
+#define GPCMD_VERIFY_10 0x2f
+#define GPCMD_WRITE_10 0x2a
+#define GPCMD_WRITE_AND_VERIFY_10 0x2e
+/* This is listed as optional in ATAPI 2.6, but is (curiously)
+ * missing from Mt. Fuji, Table 57. It _is_ mentioned in Mt. Fuji
+ * Table 377 as an MMC command for SCSi devices though... Most ATAPI
+ * drives support it. */
+#define GPCMD_SET_SPEED 0xbb
+/* This seems to be a SCSI specific CD-ROM opcode
+ * to play data at track/index */
+#define GPCMD_PLAYAUDIO_TI 0x48
+/*
+ * From MS Media Status Notification Support Specification. For
+ * older drives only.
+ */
+#define GPCMD_GET_MEDIA_STATUS 0xda
+#define GPCMD_MODE_SENSE_6 0x1a
+
+#define ATAPI_INT_REASON_CD 0x01 /* 0 = data transfer */
+#define ATAPI_INT_REASON_IO 0x02 /* 1 = transfer to the host */
+#define ATAPI_INT_REASON_REL 0x04
+#define ATAPI_INT_REASON_TAG 0xf8
+
+/* same constants as bochs */
+#define ASC_NO_SEEK_COMPLETE 0x02
+#define ASC_ILLEGAL_OPCODE 0x20
+#define ASC_LOGICAL_BLOCK_OOR 0x21
+#define ASC_INV_FIELD_IN_CMD_PACKET 0x24
+#define ASC_MEDIUM_MAY_HAVE_CHANGED 0x28
+#define ASC_INCOMPATIBLE_FORMAT 0x30
+#define ASC_MEDIUM_NOT_PRESENT 0x3a
+#define ASC_SAVING_PARAMETERS_NOT_SUPPORTED 0x39
+#define ASC_DATA_PHASE_ERROR 0x4b
+#define ASC_MEDIA_REMOVAL_PREVENTED 0x53
+
+#define CFA_NO_ERROR 0x00
+#define CFA_MISC_ERROR 0x09
+#define CFA_INVALID_COMMAND 0x20
+#define CFA_INVALID_ADDRESS 0x21
+#define CFA_ADDRESS_OVERFLOW 0x2f
+
+#define SMART_READ_DATA 0xd0
+#define SMART_READ_THRESH 0xd1
+#define SMART_ATTR_AUTOSAVE 0xd2
+#define SMART_SAVE_ATTR 0xd3
+#define SMART_EXECUTE_OFFLINE 0xd4
+#define SMART_READ_LOG 0xd5
+#define SMART_WRITE_LOG 0xd6
+#define SMART_ENABLE 0xd8
+#define SMART_DISABLE 0xd9
+#define SMART_STATUS 0xda
+
+extern const char *IDE_DMA_CMD_lookup[IDE_DMA__COUNT];
+
+extern const MemoryRegionPortio ide_portio_list[];
+extern const MemoryRegionPortio ide_portio2_list[];
+
+#define ide_cmd_is_read(s) \
+ ((s)->dma_cmd == IDE_DMA_READ)
+
+typedef struct IDEBufferedRequest {
+ QLIST_ENTRY(IDEBufferedRequest) list;
+ QEMUIOVector qiov;
+ QEMUIOVector *original_qiov;
+ BlockCompletionFunc *original_cb;
+ void *original_opaque;
+ bool orphaned;
+} IDEBufferedRequest;
+
+/* These are used for the error_status field of IDEBus */
+#define IDE_RETRY_MASK 0xf8
+#define IDE_RETRY_DMA 0x08
+#define IDE_RETRY_PIO 0x10
+#define IDE_RETRY_ATAPI 0x20 /* reused IDE_RETRY_READ bit */
+#define IDE_RETRY_READ 0x20
+#define IDE_RETRY_FLUSH 0x40
+#define IDE_RETRY_TRIM 0x80
+#define IDE_RETRY_HBA 0x100
+
+#define IS_IDE_RETRY_DMA(_status) \
+ ((_status) & IDE_RETRY_DMA)
+
+#define IS_IDE_RETRY_PIO(_status) \
+ ((_status) & IDE_RETRY_PIO)
+
+/*
+ * The method of the IDE_RETRY_ATAPI determination is to use a previously
+ * impossible bit combination as a new status value.
+ */
+#define IS_IDE_RETRY_ATAPI(_status) \
+ (((_status) & IDE_RETRY_MASK) == IDE_RETRY_ATAPI)
+
+static inline uint8_t ide_dma_cmd_to_retry(uint8_t dma_cmd)
+{
+ switch (dma_cmd) {
+ case IDE_DMA_READ:
+ return IDE_RETRY_DMA | IDE_RETRY_READ;
+ case IDE_DMA_WRITE:
+ return IDE_RETRY_DMA;
+ case IDE_DMA_TRIM:
+ return IDE_RETRY_DMA | IDE_RETRY_TRIM;
+ case IDE_DMA_ATAPI:
+ return IDE_RETRY_ATAPI;
+ default:
+ break;
+ }
+ return 0;
+}
+
+static inline IDEState *ide_bus_active_if(IDEBus *bus)
+{
+ return bus->ifs + bus->unit;
+}
+
+/* hw/ide/core.c */
+extern const VMStateDescription vmstate_ide_bus;
+
+#define VMSTATE_IDE_BUS(_field, _state) \
+ VMSTATE_STRUCT(_field, _state, 1, vmstate_ide_bus, IDEBus)
+
+#define VMSTATE_IDE_BUS_ARRAY(_field, _state, _num) \
+ VMSTATE_STRUCT_ARRAY(_field, _state, _num, 1, vmstate_ide_bus, IDEBus)
+
+extern const VMStateDescription vmstate_ide_drive;
+
+#define VMSTATE_IDE_DRIVES(_field, _state) \
+ VMSTATE_STRUCT_ARRAY(_field, _state, 2, 3, vmstate_ide_drive, IDEState)
+
+#define VMSTATE_IDE_DRIVE(_field, _state) \
+ VMSTATE_STRUCT(_field, _state, 1, vmstate_ide_drive, IDEState)
+
+void ide_bus_reset(IDEBus *bus);
+int64_t ide_get_sector(IDEState *s);
+void ide_set_sector(IDEState *s, int64_t sector_num);
+
+void ide_start_dma(IDEState *s, BlockCompletionFunc *cb);
+void dma_buf_commit(IDEState *s, uint32_t tx_bytes);
+void ide_dma_error(IDEState *s);
+void ide_abort_command(IDEState *s);
+
+void ide_atapi_cmd_ok(IDEState *s);
+void ide_atapi_cmd_error(IDEState *s, int sense_key, int asc);
+void ide_atapi_dma_restart(IDEState *s);
+void ide_atapi_io_error(IDEState *s, int ret);
+
+void ide_ioport_write(void *opaque, uint32_t addr, uint32_t val);
+uint32_t ide_ioport_read(void *opaque, uint32_t addr1);
+uint32_t ide_status_read(void *opaque, uint32_t addr);
+void ide_ctrl_write(void *opaque, uint32_t addr, uint32_t val);
+void ide_data_writew(void *opaque, uint32_t addr, uint32_t val);
+uint32_t ide_data_readw(void *opaque, uint32_t addr);
+void ide_data_writel(void *opaque, uint32_t addr, uint32_t val);
+uint32_t ide_data_readl(void *opaque, uint32_t addr);
+
+int ide_init_drive(IDEState *s, BlockBackend *blk, IDEDriveKind kind,
+ const char *version, const char *serial, const char *model,
+ uint64_t wwn,
+ uint32_t cylinders, uint32_t heads, uint32_t secs,
+ int chs_trans, Error **errp);
+void ide_exit(IDEState *s);
+void ide_bus_init_output_irq(IDEBus *bus, qemu_irq irq_out);
+int ide_init_ioport(IDEBus *bus, ISADevice *isa, int iobase, int iobase2);
+void ide_bus_set_irq(IDEBus *bus);
+void ide_bus_register_restart_cb(IDEBus *bus);
+
+void ide_bus_exec_cmd(IDEBus *bus, uint32_t val);
+
+void ide_transfer_start(IDEState *s, uint8_t *buf, int size,
+ EndTransferFunc *end_transfer_func);
+bool ide_transfer_start_norecurse(IDEState *s, uint8_t *buf, int size,
+ EndTransferFunc *end_transfer_func);
+void ide_transfer_stop(IDEState *s);
+void ide_set_inactive(IDEState *s, bool more);
+BlockAIOCB *ide_issue_trim(
+ int64_t offset, QEMUIOVector *qiov,
+ BlockCompletionFunc *cb, void *cb_opaque, void *opaque);
+BlockAIOCB *ide_buffered_readv(IDEState *s, int64_t sector_num,
+ QEMUIOVector *iov, int nb_sectors,
+ BlockCompletionFunc *cb, void *opaque);
+void ide_cancel_dma_sync(IDEState *s);
+
+/* hw/ide/atapi.c */
+void ide_atapi_cmd(IDEState *s);
+void ide_atapi_cmd_reply_end(IDEState *s);
+
+int ide_handle_rw_error(IDEState *s, int error, int op);
+
+#endif /* HW_IDE_INTERNAL_H */
+++ /dev/null
-#ifndef HW_IDE_INTERNAL_H
-#define HW_IDE_INTERNAL_H
-
-/*
- * QEMU IDE Emulation -- internal header file
- * only files in hw/ide/ are supposed to include this file.
- * non-internal declarations are in hw/include/ide-*.h
- */
-
-#include "hw/ide/ide-bus.h"
-
-/* debug IDE devices */
-#define USE_DMA_CDROM
-
-/* Device/Head ("select") Register */
-#define ATA_DEV_SELECT 0x10
-/* ATA1,3: Defined as '1'.
- * ATA2: Reserved.
- * ATA3-7: obsolete. */
-#define ATA_DEV_ALWAYS_ON 0xA0
-#define ATA_DEV_LBA 0x40
-#define ATA_DEV_LBA_MSB 0x0F /* LBA 24:27 */
-#define ATA_DEV_HS 0x0F /* HS 3:0 */
-
-
-/* Bits of HD_STATUS */
-#define ERR_STAT 0x01
-#define INDEX_STAT 0x02
-#define ECC_STAT 0x04 /* Corrected error */
-#define DRQ_STAT 0x08
-#define SEEK_STAT 0x10
-#define SRV_STAT 0x10
-#define WRERR_STAT 0x20
-#define READY_STAT 0x40
-#define BUSY_STAT 0x80
-
-/* Bits for HD_ERROR */
-#define MARK_ERR 0x01 /* Bad address mark */
-#define TRK0_ERR 0x02 /* couldn't find track 0 */
-#define ABRT_ERR 0x04 /* Command aborted */
-#define MCR_ERR 0x08 /* media change request */
-#define ID_ERR 0x10 /* ID field not found */
-#define MC_ERR 0x20 /* media changed */
-#define ECC_ERR 0x40 /* Uncorrectable ECC error */
-#define BBD_ERR 0x80 /* pre-EIDE meaning: block marked bad */
-#define ICRC_ERR 0x80 /* new meaning: CRC error during transfer */
-
-/* Bits of HD_NSECTOR */
-#define CD 0x01
-#define IO 0x02
-#define REL 0x04
-#define TAG_MASK 0xf8
-
-/* Bits of Device Control register */
-#define IDE_CTRL_HOB 0x80
-#define IDE_CTRL_RESET 0x04
-#define IDE_CTRL_DISABLE_IRQ 0x02
-
-/* ACS-2 T13/2015-D Table B.2 Command codes */
-#define WIN_NOP 0x00
-/* reserved 0x01..0x02 */
-#define CFA_REQ_EXT_ERROR_CODE 0x03 /* CFA Request Extended Error Code */
-/* reserved 0x04..0x05 */
-#define WIN_DSM 0x06
-/* reserved 0x07 */
-#define WIN_DEVICE_RESET 0x08
-/* reserved 0x09..0x0a */
-/* REQUEST SENSE DATA EXT 0x0B */
-/* reserved 0x0C..0x0F */
-#define WIN_RECAL 0x10 /* obsolete since ATA4 */
-/* obsolete since ATA3, retired in ATA4 0x11..0x1F */
-#define WIN_READ 0x20 /* 28-Bit */
-#define WIN_READ_ONCE 0x21 /* 28-Bit w/o retries, obsolete since ATA5 */
-/* obsolete since ATA4 0x22..0x23 */
-#define WIN_READ_EXT 0x24 /* 48-Bit */
-#define WIN_READDMA_EXT 0x25 /* 48-Bit */
-#define WIN_READDMA_QUEUED_EXT 0x26 /* 48-Bit, obsolete since ACS2 */
-#define WIN_READ_NATIVE_MAX_EXT 0x27 /* 48-Bit */
-/* reserved 0x28 */
-#define WIN_MULTREAD_EXT 0x29 /* 48-Bit */
-/* READ STREAM DMA EXT 0x2A */
-/* READ STREAM EXT 0x2B */
-/* reserved 0x2C..0x2E */
-/* READ LOG EXT 0x2F */
-#define WIN_WRITE 0x30 /* 28-Bit */
-#define WIN_WRITE_ONCE 0x31 /* 28-Bit w/o retries, obsolete since ATA5 */
-/* obsolete since ATA4 0x32..0x33 */
-#define WIN_WRITE_EXT 0x34 /* 48-Bit */
-#define WIN_WRITEDMA_EXT 0x35 /* 48-Bit */
-#define WIN_WRITEDMA_QUEUED_EXT 0x36 /* 48-Bit */
-#define WIN_SET_MAX_EXT 0x37 /* 48-Bit, obsolete since ACS2 */
-#define WIN_SET_MAX_EXT 0x37 /* 48-Bit */
-#define CFA_WRITE_SECT_WO_ERASE 0x38 /* CFA Write Sectors without erase */
-#define WIN_MULTWRITE_EXT 0x39 /* 48-Bit */
-/* WRITE STREAM DMA EXT 0x3A */
-/* WRITE STREAM EXT 0x3B */
-#define WIN_WRITE_VERIFY 0x3C /* 28-Bit, obsolete since ATA4 */
-/* WRITE DMA FUA EXT 0x3D */
-/* obsolete since ACS2 0x3E */
-/* WRITE LOG EXT 0x3F */
-#define WIN_VERIFY 0x40 /* 28-Bit - Read Verify Sectors */
-#define WIN_VERIFY_ONCE 0x41 /* 28-Bit - w/o retries, obsolete since ATA5 */
-#define WIN_VERIFY_EXT 0x42 /* 48-Bit */
-/* reserved 0x43..0x44 */
-/* WRITE UNCORRECTABLE EXT 0x45 */
-/* reserved 0x46 */
-/* READ LOG DMA EXT 0x47 */
-/* reserved 0x48..0x4F */
-/* obsolete since ATA4 0x50 */
-/* CONFIGURE STREAM 0x51 */
-/* reserved 0x52..0x56 */
-/* WRITE LOG DMA EXT 0x57 */
-/* reserved 0x58..0x5A */
-/* TRUSTED NON DATA 0x5B */
-/* TRUSTED RECEIVE 0x5C */
-/* TRUSTED RECEIVE DMA 0x5D */
-/* TRUSTED SEND 0x5E */
-/* TRUSTED SEND DMA 0x5F */
-/* READ FPDMA QUEUED 0x60 */
-/* WRITE FPDMA QUEUED 0x61 */
-/* reserved 0x62->0x6F */
-#define WIN_SEEK 0x70 /* obsolete since ATA7 */
-/* reserved 0x71-0x7F */
-/* vendor specific 0x80-0x86 */
-#define CFA_TRANSLATE_SECTOR 0x87 /* CFA Translate Sector */
-/* vendor specific 0x88-0x8F */
-#define WIN_DIAGNOSE 0x90
-#define WIN_SPECIFY 0x91 /* set drive geometry translation, obsolete since ATA6 */
-#define WIN_DOWNLOAD_MICROCODE 0x92
-/* DOWNLOAD MICROCODE DMA 0x93 */
-#define WIN_STANDBYNOW2 0x94 /* retired in ATA4 */
-#define WIN_IDLEIMMEDIATE2 0x95 /* force drive to become "ready", retired in ATA4 */
-#define WIN_STANDBY2 0x96 /* retired in ATA4 */
-#define WIN_SETIDLE2 0x97 /* retired in ATA4 */
-#define WIN_CHECKPOWERMODE2 0x98 /* retired in ATA4 */
-#define WIN_SLEEPNOW2 0x99 /* retired in ATA4 */
-/* vendor specific 0x9A */
-/* reserved 0x9B..0x9F */
-#define WIN_PACKETCMD 0xA0 /* Send a packet command. */
-#define WIN_PIDENTIFY 0xA1 /* identify ATAPI device */
-#define WIN_QUEUED_SERVICE 0xA2 /* obsolete since ACS2 */
-/* reserved 0xA3..0xAF */
-#define WIN_SMART 0xB0 /* self-monitoring and reporting */
-/* Device Configuration Overlay 0xB1 */
-/* reserved 0xB2..0xB3 */
-/* Sanitize Device 0xB4 */
-/* reserved 0xB5 */
-/* NV Cache 0xB6 */
-/* reserved for CFA 0xB7..0xBB */
-#define CFA_ACCESS_METADATA_STORAGE 0xB8
-/* reserved 0xBC..0xBF */
-#define CFA_ERASE_SECTORS 0xC0 /* microdrives implement as NOP */
-/* vendor specific 0xC1..0xC3 */
-#define WIN_MULTREAD 0xC4 /* read sectors using multiple mode*/
-#define WIN_MULTWRITE 0xC5 /* write sectors using multiple mode */
-#define WIN_SETMULT 0xC6 /* enable/disable multiple mode */
-#define WIN_READDMA_QUEUED 0xC7 /* read sectors using Queued DMA transfers, obsolete since ACS2 */
-#define WIN_READDMA 0xC8 /* read sectors using DMA transfers */
-#define WIN_READDMA_ONCE 0xC9 /* 28-Bit - w/o retries, obsolete since ATA5 */
-#define WIN_WRITEDMA 0xCA /* write sectors using DMA transfers */
-#define WIN_WRITEDMA_ONCE 0xCB /* 28-Bit - w/o retries, obsolete since ATA5 */
-#define WIN_WRITEDMA_QUEUED 0xCC /* write sectors using Queued DMA transfers, obsolete since ACS2 */
-#define CFA_WRITE_MULTI_WO_ERASE 0xCD /* CFA Write multiple without erase */
-/* WRITE MULTIPLE FUA EXT 0xCE */
-/* reserved 0xCF..0xDO */
-/* CHECK MEDIA CARD TYPE 0xD1 */
-/* reserved for media card pass through 0xD2..0xD4 */
-/* reserved 0xD5..0xD9 */
-#define WIN_GETMEDIASTATUS 0xDA /* obsolete since ATA8 */
-/* obsolete since ATA3, retired in ATA4 0xDB..0xDD */
-#define WIN_DOORLOCK 0xDE /* lock door on removable drives, obsolete since ATA8 */
-#define WIN_DOORUNLOCK 0xDF /* unlock door on removable drives, obsolete since ATA8 */
-#define WIN_STANDBYNOW1 0xE0
-#define WIN_IDLEIMMEDIATE 0xE1 /* force drive to become "ready" */
-#define WIN_STANDBY 0xE2 /* Set device in Standby Mode */
-#define WIN_SETIDLE1 0xE3
-#define WIN_READ_BUFFER 0xE4 /* force read only 1 sector */
-#define WIN_CHECKPOWERMODE1 0xE5
-#define WIN_SLEEPNOW1 0xE6
-#define WIN_FLUSH_CACHE 0xE7
-#define WIN_WRITE_BUFFER 0xE8 /* force write only 1 sector */
-/* READ BUFFER DMA 0xE9 */
-#define WIN_FLUSH_CACHE_EXT 0xEA /* 48-Bit */
-/* WRITE BUFFER DMA 0xEB */
-#define WIN_IDENTIFY 0xEC /* ask drive to identify itself */
-#define WIN_MEDIAEJECT 0xED /* obsolete since ATA8 */
-/* obsolete since ATA4 0xEE */
-#define WIN_SETFEATURES 0xEF /* set special drive features */
-#define IBM_SENSE_CONDITION 0xF0 /* measure disk temperature, vendor specific */
-#define WIN_SECURITY_SET_PASS 0xF1
-#define WIN_SECURITY_UNLOCK 0xF2
-#define WIN_SECURITY_ERASE_PREPARE 0xF3
-#define WIN_SECURITY_ERASE_UNIT 0xF4
-#define WIN_SECURITY_FREEZE_LOCK 0xF5
-#define CFA_WEAR_LEVEL 0xF5 /* microdrives implement as NOP; not specified in T13! */
-#define WIN_SECURITY_DISABLE 0xF6
-/* vendor specific 0xF7 */
-#define WIN_READ_NATIVE_MAX 0xF8 /* return the native maximum address */
-#define WIN_SET_MAX 0xF9
-/* vendor specific 0xFA..0xFF */
-
-/* set to 1 set disable mult support */
-#define MAX_MULT_SECTORS 16
-
-#define IDE_DMA_BUF_SECTORS 256
-
-/* feature values for Data Set Management */
-#define DSM_TRIM 0x01
-
-#if (IDE_DMA_BUF_SECTORS < MAX_MULT_SECTORS)
-#error "IDE_DMA_BUF_SECTORS must be bigger or equal to MAX_MULT_SECTORS"
-#endif
-
-/* ATAPI defines */
-
-#define ATAPI_PACKET_SIZE 12
-
-/* The generic packet command opcodes for CD/DVD Logical Units,
- * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
-#define GPCMD_BLANK 0xa1
-#define GPCMD_CLOSE_TRACK 0x5b
-#define GPCMD_FLUSH_CACHE 0x35
-#define GPCMD_FORMAT_UNIT 0x04
-#define GPCMD_GET_CONFIGURATION 0x46
-#define GPCMD_GET_EVENT_STATUS_NOTIFICATION 0x4a
-#define GPCMD_GET_PERFORMANCE 0xac
-#define GPCMD_INQUIRY 0x12
-#define GPCMD_LOAD_UNLOAD 0xa6
-#define GPCMD_MECHANISM_STATUS 0xbd
-#define GPCMD_MODE_SELECT_10 0x55
-#define GPCMD_MODE_SENSE_10 0x5a
-#define GPCMD_PAUSE_RESUME 0x4b
-#define GPCMD_PLAY_AUDIO_10 0x45
-#define GPCMD_PLAY_AUDIO_MSF 0x47
-#define GPCMD_PLAY_AUDIO_TI 0x48
-#define GPCMD_PLAY_CD 0xbc
-#define GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1e
-#define GPCMD_READ_10 0x28
-#define GPCMD_READ_12 0xa8
-#define GPCMD_READ_CDVD_CAPACITY 0x25
-#define GPCMD_READ_CD 0xbe
-#define GPCMD_READ_CD_MSF 0xb9
-#define GPCMD_READ_DISC_INFO 0x51
-#define GPCMD_READ_DVD_STRUCTURE 0xad
-#define GPCMD_READ_FORMAT_CAPACITIES 0x23
-#define GPCMD_READ_HEADER 0x44
-#define GPCMD_READ_TRACK_RZONE_INFO 0x52
-#define GPCMD_READ_SUBCHANNEL 0x42
-#define GPCMD_READ_TOC_PMA_ATIP 0x43
-#define GPCMD_REPAIR_RZONE_TRACK 0x58
-#define GPCMD_REPORT_KEY 0xa4
-#define GPCMD_REQUEST_SENSE 0x03
-#define GPCMD_RESERVE_RZONE_TRACK 0x53
-#define GPCMD_SCAN 0xba
-#define GPCMD_SEEK 0x2b
-#define GPCMD_SEND_DVD_STRUCTURE 0xad
-#define GPCMD_SEND_EVENT 0xa2
-#define GPCMD_SEND_KEY 0xa3
-#define GPCMD_SEND_OPC 0x54
-#define GPCMD_SET_READ_AHEAD 0xa7
-#define GPCMD_SET_STREAMING 0xb6
-#define GPCMD_START_STOP_UNIT 0x1b
-#define GPCMD_STOP_PLAY_SCAN 0x4e
-#define GPCMD_TEST_UNIT_READY 0x00
-#define GPCMD_VERIFY_10 0x2f
-#define GPCMD_WRITE_10 0x2a
-#define GPCMD_WRITE_AND_VERIFY_10 0x2e
-/* This is listed as optional in ATAPI 2.6, but is (curiously)
- * missing from Mt. Fuji, Table 57. It _is_ mentioned in Mt. Fuji
- * Table 377 as an MMC command for SCSi devices though... Most ATAPI
- * drives support it. */
-#define GPCMD_SET_SPEED 0xbb
-/* This seems to be a SCSI specific CD-ROM opcode
- * to play data at track/index */
-#define GPCMD_PLAYAUDIO_TI 0x48
-/*
- * From MS Media Status Notification Support Specification. For
- * older drives only.
- */
-#define GPCMD_GET_MEDIA_STATUS 0xda
-#define GPCMD_MODE_SENSE_6 0x1a
-
-#define ATAPI_INT_REASON_CD 0x01 /* 0 = data transfer */
-#define ATAPI_INT_REASON_IO 0x02 /* 1 = transfer to the host */
-#define ATAPI_INT_REASON_REL 0x04
-#define ATAPI_INT_REASON_TAG 0xf8
-
-/* same constants as bochs */
-#define ASC_NO_SEEK_COMPLETE 0x02
-#define ASC_ILLEGAL_OPCODE 0x20
-#define ASC_LOGICAL_BLOCK_OOR 0x21
-#define ASC_INV_FIELD_IN_CMD_PACKET 0x24
-#define ASC_MEDIUM_MAY_HAVE_CHANGED 0x28
-#define ASC_INCOMPATIBLE_FORMAT 0x30
-#define ASC_MEDIUM_NOT_PRESENT 0x3a
-#define ASC_SAVING_PARAMETERS_NOT_SUPPORTED 0x39
-#define ASC_DATA_PHASE_ERROR 0x4b
-#define ASC_MEDIA_REMOVAL_PREVENTED 0x53
-
-#define CFA_NO_ERROR 0x00
-#define CFA_MISC_ERROR 0x09
-#define CFA_INVALID_COMMAND 0x20
-#define CFA_INVALID_ADDRESS 0x21
-#define CFA_ADDRESS_OVERFLOW 0x2f
-
-#define SMART_READ_DATA 0xd0
-#define SMART_READ_THRESH 0xd1
-#define SMART_ATTR_AUTOSAVE 0xd2
-#define SMART_SAVE_ATTR 0xd3
-#define SMART_EXECUTE_OFFLINE 0xd4
-#define SMART_READ_LOG 0xd5
-#define SMART_WRITE_LOG 0xd6
-#define SMART_ENABLE 0xd8
-#define SMART_DISABLE 0xd9
-#define SMART_STATUS 0xda
-
-extern const char *IDE_DMA_CMD_lookup[IDE_DMA__COUNT];
-
-extern const MemoryRegionPortio ide_portio_list[];
-extern const MemoryRegionPortio ide_portio2_list[];
-
-#define ide_cmd_is_read(s) \
- ((s)->dma_cmd == IDE_DMA_READ)
-
-typedef struct IDEBufferedRequest {
- QLIST_ENTRY(IDEBufferedRequest) list;
- QEMUIOVector qiov;
- QEMUIOVector *original_qiov;
- BlockCompletionFunc *original_cb;
- void *original_opaque;
- bool orphaned;
-} IDEBufferedRequest;
-
-/* These are used for the error_status field of IDEBus */
-#define IDE_RETRY_MASK 0xf8
-#define IDE_RETRY_DMA 0x08
-#define IDE_RETRY_PIO 0x10
-#define IDE_RETRY_ATAPI 0x20 /* reused IDE_RETRY_READ bit */
-#define IDE_RETRY_READ 0x20
-#define IDE_RETRY_FLUSH 0x40
-#define IDE_RETRY_TRIM 0x80
-#define IDE_RETRY_HBA 0x100
-
-#define IS_IDE_RETRY_DMA(_status) \
- ((_status) & IDE_RETRY_DMA)
-
-#define IS_IDE_RETRY_PIO(_status) \
- ((_status) & IDE_RETRY_PIO)
-
-/*
- * The method of the IDE_RETRY_ATAPI determination is to use a previously
- * impossible bit combination as a new status value.
- */
-#define IS_IDE_RETRY_ATAPI(_status) \
- (((_status) & IDE_RETRY_MASK) == IDE_RETRY_ATAPI)
-
-static inline uint8_t ide_dma_cmd_to_retry(uint8_t dma_cmd)
-{
- switch (dma_cmd) {
- case IDE_DMA_READ:
- return IDE_RETRY_DMA | IDE_RETRY_READ;
- case IDE_DMA_WRITE:
- return IDE_RETRY_DMA;
- case IDE_DMA_TRIM:
- return IDE_RETRY_DMA | IDE_RETRY_TRIM;
- case IDE_DMA_ATAPI:
- return IDE_RETRY_ATAPI;
- default:
- break;
- }
- return 0;
-}
-
-static inline IDEState *ide_bus_active_if(IDEBus *bus)
-{
- return bus->ifs + bus->unit;
-}
-
-/* hw/ide/core.c */
-extern const VMStateDescription vmstate_ide_bus;
-
-#define VMSTATE_IDE_BUS(_field, _state) \
- VMSTATE_STRUCT(_field, _state, 1, vmstate_ide_bus, IDEBus)
-
-#define VMSTATE_IDE_BUS_ARRAY(_field, _state, _num) \
- VMSTATE_STRUCT_ARRAY(_field, _state, _num, 1, vmstate_ide_bus, IDEBus)
-
-extern const VMStateDescription vmstate_ide_drive;
-
-#define VMSTATE_IDE_DRIVES(_field, _state) \
- VMSTATE_STRUCT_ARRAY(_field, _state, 2, 3, vmstate_ide_drive, IDEState)
-
-#define VMSTATE_IDE_DRIVE(_field, _state) \
- VMSTATE_STRUCT(_field, _state, 1, vmstate_ide_drive, IDEState)
-
-void ide_bus_reset(IDEBus *bus);
-int64_t ide_get_sector(IDEState *s);
-void ide_set_sector(IDEState *s, int64_t sector_num);
-
-void ide_start_dma(IDEState *s, BlockCompletionFunc *cb);
-void dma_buf_commit(IDEState *s, uint32_t tx_bytes);
-void ide_dma_error(IDEState *s);
-void ide_abort_command(IDEState *s);
-
-void ide_atapi_cmd_ok(IDEState *s);
-void ide_atapi_cmd_error(IDEState *s, int sense_key, int asc);
-void ide_atapi_dma_restart(IDEState *s);
-void ide_atapi_io_error(IDEState *s, int ret);
-
-void ide_ioport_write(void *opaque, uint32_t addr, uint32_t val);
-uint32_t ide_ioport_read(void *opaque, uint32_t addr1);
-uint32_t ide_status_read(void *opaque, uint32_t addr);
-void ide_ctrl_write(void *opaque, uint32_t addr, uint32_t val);
-void ide_data_writew(void *opaque, uint32_t addr, uint32_t val);
-uint32_t ide_data_readw(void *opaque, uint32_t addr);
-void ide_data_writel(void *opaque, uint32_t addr, uint32_t val);
-uint32_t ide_data_readl(void *opaque, uint32_t addr);
-
-int ide_init_drive(IDEState *s, BlockBackend *blk, IDEDriveKind kind,
- const char *version, const char *serial, const char *model,
- uint64_t wwn,
- uint32_t cylinders, uint32_t heads, uint32_t secs,
- int chs_trans, Error **errp);
-void ide_exit(IDEState *s);
-void ide_bus_init_output_irq(IDEBus *bus, qemu_irq irq_out);
-int ide_init_ioport(IDEBus *bus, ISADevice *isa, int iobase, int iobase2);
-void ide_bus_set_irq(IDEBus *bus);
-void ide_bus_register_restart_cb(IDEBus *bus);
-
-void ide_bus_exec_cmd(IDEBus *bus, uint32_t val);
-
-void ide_transfer_start(IDEState *s, uint8_t *buf, int size,
- EndTransferFunc *end_transfer_func);
-bool ide_transfer_start_norecurse(IDEState *s, uint8_t *buf, int size,
- EndTransferFunc *end_transfer_func);
-void ide_transfer_stop(IDEState *s);
-void ide_set_inactive(IDEState *s, bool more);
-BlockAIOCB *ide_issue_trim(
- int64_t offset, QEMUIOVector *qiov,
- BlockCompletionFunc *cb, void *cb_opaque, void *opaque);
-BlockAIOCB *ide_buffered_readv(IDEState *s, int64_t sector_num,
- QEMUIOVector *iov, int nb_sectors,
- BlockCompletionFunc *cb, void *opaque);
-void ide_cancel_dma_sync(IDEState *s);
-
-/* hw/ide/atapi.c */
-void ide_atapi_cmd(IDEState *s);
-void ide_atapi_cmd_reply_end(IDEState *s);
-
-int ide_handle_rw_error(IDEState *s, int error, int op);
-
-#endif /* HW_IDE_INTERNAL_H */
#include "qemu/osdep.h"
#include "hw/isa/isa.h"
-#include "hw/ide/internal.h"
+#include "ide-internal.h"
#include "trace.h"
int ide_init_ioport(IDEBus *bus, ISADevice *dev, int iobase, int iobase2)
#include "sysemu/dma.h"
#include "hw/ide/isa.h"
-#include "hw/ide/internal.h"
#include "qom/object.h"
+#include "ide-internal.h"
/***********************************************************/
/* ISA IDE definitions */
#include "sysemu/block-backend.h"
#include "sysemu/dma.h"
-#include "hw/ide/internal.h"
+#include "ide-internal.h"
/* debug MACIO */
// #define DEBUG_MACIO
#include "sysemu/dma.h"
#include "hw/irq.h"
-#include "hw/ide/internal.h"
#include "qom/object.h"
+#include "ide-internal.h"
#define TYPE_MICRODRIVE "microdrive"
OBJECT_DECLARE_SIMPLE_TYPE(MicroDriveState, MICRODRIVE)
#include "sysemu/dma.h"
#include "hw/ide/mmio.h"
-#include "hw/ide/internal.h"
#include "hw/qdev-properties.h"
+#include "ide-internal.h"
/***********************************************************/
/* MMIO based ide port
#include "sysemu/dma.h"
#include "qemu/error-report.h"
#include "qemu/module.h"
-#include "hw/ide/internal.h"
#include "hw/ide/pci.h"
+#include "ide-internal.h"
#include "trace.h"
#define BMDMA_PAGE_SIZE 4096
#include "qemu/osdep.h"
#include "qapi/error.h"
#include "hw/pci/pci.h"
-#include "hw/ide/internal.h"
#include "hw/ide/piix.h"
#include "hw/ide/pci.h"
+#include "ide-internal.h"
#include "trace.h"
static uint64_t bmdma_read(void *opaque, hwaddr addr, unsigned size)
*/
#include "qemu/osdep.h"
-#include "hw/ide/internal.h"
#include "hw/ide/pci.h"
#include "qemu/module.h"
#include "trace.h"
#include "qom/object.h"
+#include "ide-internal.h"
#define TYPE_SII3112_PCI "sii3112"
OBJECT_DECLARE_SIMPLE_TYPE(SiI3112PCIState, SII3112_PCI)
*/
#include "qemu/osdep.h"
-#include "hw/ide/internal.h"
#include "hw/pci/pci.h"
#include "migration/vmstate.h"
#include "qemu/module.h"
#include "hw/isa/vt82c686.h"
#include "hw/ide/pci.h"
#include "hw/irq.h"
+#include "ide-internal.h"
#include "trace.h"
static uint64_t bmdma_read(void *opaque, hwaddr addr,
projects / qemu-xen.git / commitdiff