ia64/linux-2.6.18-xen.hg

view drivers/serial/8250.h @ 893:f994bfe9b93b

linux/blktap2: reduce TLB flush scope

c/s 885 added very coarse TLB flushing. Since these flushes always
follow single page updates, single page flushes (when available) are
sufficient.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
author Keir Fraser <keir.fraser@citrix.com>
date Thu Jun 04 10:32:57 2009 +0100 (2009-06-04)
parents 831230e53067
children
line source
1 /*
2 * linux/drivers/char/8250.h
3 *
4 * Driver for 8250/16550-type serial ports
5 *
6 * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
7 *
8 * Copyright (C) 2001 Russell King.
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
14 *
15 * $Id: 8250.h,v 1.8 2002/07/21 21:32:30 rmk Exp $
16 */
18 #include <linux/serial_8250.h>
20 struct old_serial_port {
21 unsigned int uart;
22 unsigned int baud_base;
23 unsigned int port;
24 unsigned int irq;
25 unsigned int flags;
26 unsigned char hub6;
27 unsigned char io_type;
28 unsigned char *iomem_base;
29 unsigned short iomem_reg_shift;
30 };
32 /*
33 * This replaces serial_uart_config in include/linux/serial.h
34 */
35 struct serial8250_config {
36 const char *name;
37 unsigned short fifo_size;
38 unsigned short tx_loadsz;
39 unsigned char fcr;
40 unsigned int flags;
41 };
43 #define UART_CAP_FIFO (1 << 8) /* UART has FIFO */
44 #define UART_CAP_EFR (1 << 9) /* UART has EFR */
45 #define UART_CAP_SLEEP (1 << 10) /* UART has IER sleep */
46 #define UART_CAP_AFE (1 << 11) /* MCR-based hw flow control */
47 #define UART_CAP_UUE (1 << 12) /* UART needs IER bit 6 set (Xscale) */
49 #define UART_BUG_QUOT (1 << 0) /* UART has buggy quot LSB */
50 #define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */
51 #define UART_BUG_NOMSR (1 << 2) /* UART has buggy MSR status bits (Au1x00) */
53 #define PROBE_RSA (1 << 0)
54 #define PROBE_ANY (~0)
56 #define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8)
58 #ifdef CONFIG_SERIAL_8250_SHARE_IRQ
59 #define SERIAL8250_SHARE_IRQS 1
60 #else
61 #define SERIAL8250_SHARE_IRQS 0
62 #endif
64 #if defined(__alpha__) && !defined(CONFIG_PCI)
65 /*
66 * Digital did something really horribly wrong with the OUT1 and OUT2
67 * lines on at least some ALPHA's. The failure mode is that if either
68 * is cleared, the machine locks up with endless interrupts.
69 */
70 #define ALPHA_KLUDGE_MCR (UART_MCR_OUT2 | UART_MCR_OUT1)
71 #elif defined(CONFIG_SBC8560)
72 /*
73 * WindRiver did something similarly broken on their SBC8560 board. The
74 * UART tristates its IRQ output while OUT2 is clear, but they pulled
75 * the interrupt line _up_ instead of down, so if we register the IRQ
76 * while the UART is in that state, we die in an IRQ storm. */
77 #define ALPHA_KLUDGE_MCR (UART_MCR_OUT2)
78 #else
79 #define ALPHA_KLUDGE_MCR 0
80 #endif