ia64/linux-2.6.18-xen.hg

view drivers/char/toshiba.c @ 893:f994bfe9b93b

linux/blktap2: reduce TLB flush scope

c/s 885 added very coarse TLB flushing. Since these flushes always
follow single page updates, single page flushes (when available) are
sufficient.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
author Keir Fraser <keir.fraser@citrix.com>
date Thu Jun 04 10:32:57 2009 +0100 (2009-06-04)
parents 831230e53067
children
line source
1 /* toshiba.c -- Linux driver for accessing the SMM on Toshiba laptops
2 *
3 * Copyright (c) 1996-2001 Jonathan A. Buzzard (jonathan@buzzard.org.uk)
4 *
5 * Valuable assistance and patches from:
6 * Tom May <tom@you-bastards.com>
7 * Rob Napier <rnapier@employees.org>
8 *
9 * Fn status port numbers for machine ID's courtesy of
10 * 0xfc02: Scott Eisert <scott.e@sky-eye.com>
11 * 0xfc04: Steve VanDevender <stevev@efn.org>
12 * 0xfc08: Garth Berry <garth@itsbruce.net>
13 * 0xfc0a: Egbert Eich <eich@xfree86.org>
14 * 0xfc10: Andrew Lofthouse <Andrew.Lofthouse@robins.af.mil>
15 * 0xfc11: Spencer Olson <solson@novell.com>
16 * 0xfc13: Claudius Frankewitz <kryp@gmx.de>
17 * 0xfc15: Tom May <tom@you-bastards.com>
18 * 0xfc17: Dave Konrad <konrad@xenia.it>
19 * 0xfc1a: George Betzos <betzos@engr.colostate.edu>
20 * 0xfc1b: Munemasa Wada <munemasa@jnovel.co.jp>
21 * 0xfc1d: Arthur Liu <armie@slap.mine.nu>
22 * 0xfc5a: Jacques L'helgoualc'h <lhh@free.fr>
23 * 0xfcd1: Mr. Dave Konrad <konrad@xenia.it>
24 *
25 * WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING
26 *
27 * This code is covered by the GNU GPL and you are free to make any
28 * changes you wish to it under the terms of the license. However the
29 * code has the potential to render your computer and/or someone else's
30 * unusable. Please proceed with care when modifying the code.
31 *
32 * Note: Unfortunately the laptop hardware can close the System Configuration
33 * Interface on it's own accord. It is therefore necessary for *all*
34 * programs using this driver to be aware that *any* SCI call can fail at
35 * *any* time. It is up to any program to be aware of this eventuality
36 * and take appropriate steps.
37 *
38 * This program is free software; you can redistribute it and/or modify it
39 * under the terms of the GNU General Public License as published by the
40 * Free Software Foundation; either version 2, or (at your option) any
41 * later version.
42 *
43 * This program is distributed in the hope that it will be useful, but
44 * WITHOUT ANY WARRANTY; without even the implied warranty of
45 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
46 * General Public License for more details.
47 *
48 * The information used to write this driver has been obtained by reverse
49 * engineering the software supplied by Toshiba for their portable computers in
50 * strict accordance with the European Council Directive 92/250/EEC on the legal
51 * protection of computer programs, and it's implementation into English Law by
52 * the Copyright (Computer Programs) Regulations 1992 (S.I. 1992 No.3233).
53 *
54 */
56 #define TOSH_VERSION "1.11 26/9/2001"
57 #define TOSH_DEBUG 0
59 #include <linux/module.h>
60 #include <linux/kernel.h>
61 #include <linux/sched.h>
62 #include <linux/types.h>
63 #include <linux/fcntl.h>
64 #include <linux/miscdevice.h>
65 #include <linux/ioport.h>
66 #include <asm/io.h>
67 #include <asm/uaccess.h>
68 #include <linux/init.h>
69 #include <linux/stat.h>
70 #include <linux/proc_fs.h>
72 #include <linux/toshiba.h>
74 #define TOSH_MINOR_DEV 181
76 MODULE_LICENSE("GPL");
77 MODULE_AUTHOR("Jonathan Buzzard <jonathan@buzzard.org.uk>");
78 MODULE_DESCRIPTION("Toshiba laptop SMM driver");
79 MODULE_SUPPORTED_DEVICE("toshiba");
81 static int tosh_fn;
82 module_param_named(fn, tosh_fn, int, 0);
83 MODULE_PARM_DESC(fn, "User specified Fn key detection port");
85 static int tosh_id;
86 static int tosh_bios;
87 static int tosh_date;
88 static int tosh_sci;
89 static int tosh_fan;
91 static int tosh_ioctl(struct inode *, struct file *, unsigned int,
92 unsigned long);
95 static const struct file_operations tosh_fops = {
96 .owner = THIS_MODULE,
97 .ioctl = tosh_ioctl,
98 };
100 static struct miscdevice tosh_device = {
101 TOSH_MINOR_DEV,
102 "toshiba",
103 &tosh_fops
104 };
106 /*
107 * Read the Fn key status
108 */
109 #ifdef CONFIG_PROC_FS
110 static int tosh_fn_status(void)
111 {
112 unsigned char scan;
113 unsigned long flags;
115 if (tosh_fn!=0) {
116 scan = inb(tosh_fn);
117 } else {
118 local_irq_save(flags);
119 outb(0x8e, 0xe4);
120 scan = inb(0xe5);
121 local_irq_restore(flags);
122 }
124 return (int) scan;
125 }
126 #endif
129 /*
130 * For the Portage 610CT and the Tecra 700CS/700CDT emulate the HCI fan function
131 */
132 static int tosh_emulate_fan(SMMRegisters *regs)
133 {
134 unsigned long eax,ecx,flags;
135 unsigned char al;
137 eax = regs->eax & 0xff00;
138 ecx = regs->ecx & 0xffff;
140 /* Portage 610CT */
142 if (tosh_id==0xfccb) {
143 if (eax==0xfe00) {
144 /* fan status */
145 local_irq_save(flags);
146 outb(0xbe, 0xe4);
147 al = inb(0xe5);
148 local_irq_restore(flags);
149 regs->eax = 0x00;
150 regs->ecx = (unsigned int) (al & 0x01);
151 }
152 if ((eax==0xff00) && (ecx==0x0000)) {
153 /* fan off */
154 local_irq_save(flags);
155 outb(0xbe, 0xe4);
156 al = inb(0xe5);
157 outb(0xbe, 0xe4);
158 outb (al | 0x01, 0xe5);
159 local_irq_restore(flags);
160 regs->eax = 0x00;
161 regs->ecx = 0x00;
162 }
163 if ((eax==0xff00) && (ecx==0x0001)) {
164 /* fan on */
165 local_irq_save(flags);
166 outb(0xbe, 0xe4);
167 al = inb(0xe5);
168 outb(0xbe, 0xe4);
169 outb(al & 0xfe, 0xe5);
170 local_irq_restore(flags);
171 regs->eax = 0x00;
172 regs->ecx = 0x01;
173 }
174 }
176 /* Tecra 700CS/CDT */
178 if (tosh_id==0xfccc) {
179 if (eax==0xfe00) {
180 /* fan status */
181 local_irq_save(flags);
182 outb(0xe0, 0xe4);
183 al = inb(0xe5);
184 local_irq_restore(flags);
185 regs->eax = 0x00;
186 regs->ecx = al & 0x01;
187 }
188 if ((eax==0xff00) && (ecx==0x0000)) {
189 /* fan off */
190 local_irq_save(flags);
191 outb(0xe0, 0xe4);
192 al = inb(0xe5);
193 outw(0xe0 | ((al & 0xfe) << 8), 0xe4);
194 local_irq_restore(flags);
195 regs->eax = 0x00;
196 regs->ecx = 0x00;
197 }
198 if ((eax==0xff00) && (ecx==0x0001)) {
199 /* fan on */
200 local_irq_save(flags);
201 outb(0xe0, 0xe4);
202 al = inb(0xe5);
203 outw(0xe0 | ((al | 0x01) << 8), 0xe4);
204 local_irq_restore(flags);
205 regs->eax = 0x00;
206 regs->ecx = 0x01;
207 }
208 }
210 return 0;
211 }
214 /*
215 * Put the laptop into System Management Mode
216 */
217 int tosh_smm(SMMRegisters *regs)
218 {
219 int eax;
221 asm ("# load the values into the registers\n\t" \
222 "pushl %%eax\n\t" \
223 "movl 0(%%eax),%%edx\n\t" \
224 "push %%edx\n\t" \
225 "movl 4(%%eax),%%ebx\n\t" \
226 "movl 8(%%eax),%%ecx\n\t" \
227 "movl 12(%%eax),%%edx\n\t" \
228 "movl 16(%%eax),%%esi\n\t" \
229 "movl 20(%%eax),%%edi\n\t" \
230 "popl %%eax\n\t" \
231 "# call the System Management mode\n\t" \
232 "inb $0xb2,%%al\n\t"
233 "# fill out the memory with the values in the registers\n\t" \
234 "xchgl %%eax,(%%esp)\n\t"
235 "movl %%ebx,4(%%eax)\n\t" \
236 "movl %%ecx,8(%%eax)\n\t" \
237 "movl %%edx,12(%%eax)\n\t" \
238 "movl %%esi,16(%%eax)\n\t" \
239 "movl %%edi,20(%%eax)\n\t" \
240 "popl %%edx\n\t" \
241 "movl %%edx,0(%%eax)\n\t" \
242 "# setup the return value to the carry flag\n\t" \
243 "lahf\n\t" \
244 "shrl $8,%%eax\n\t" \
245 "andl $1,%%eax\n" \
246 : "=a" (eax)
247 : "a" (regs)
248 : "%ebx", "%ecx", "%edx", "%esi", "%edi", "memory");
250 return eax;
251 }
254 static int tosh_ioctl(struct inode *ip, struct file *fp, unsigned int cmd,
255 unsigned long arg)
256 {
257 SMMRegisters regs;
258 SMMRegisters __user *argp = (SMMRegisters __user *)arg;
259 unsigned short ax,bx;
260 int err;
262 if (!argp)
263 return -EINVAL;
265 if (copy_from_user(&regs, argp, sizeof(SMMRegisters)))
266 return -EFAULT;
268 switch (cmd) {
269 case TOSH_SMM:
270 ax = regs.eax & 0xff00;
271 bx = regs.ebx & 0xffff;
272 /* block HCI calls to read/write memory & PCI devices */
273 if (((ax==0xff00) || (ax==0xfe00)) && (bx>0x0069))
274 return -EINVAL;
276 /* do we need to emulate the fan ? */
277 if (tosh_fan==1) {
278 if (((ax==0xf300) || (ax==0xf400)) && (bx==0x0004)) {
279 err = tosh_emulate_fan(&regs);
280 break;
281 }
282 }
283 err = tosh_smm(&regs);
284 break;
285 default:
286 return -EINVAL;
287 }
289 if (copy_to_user(argp, &regs, sizeof(SMMRegisters)))
290 return -EFAULT;
292 return (err==0) ? 0:-EINVAL;
293 }
296 /*
297 * Print the information for /proc/toshiba
298 */
299 #ifdef CONFIG_PROC_FS
300 static int tosh_get_info(char *buffer, char **start, off_t fpos, int length)
301 {
302 char *temp;
303 int key;
305 temp = buffer;
306 key = tosh_fn_status();
308 /* Arguments
309 0) Linux driver version (this will change if format changes)
310 1) Machine ID
311 2) SCI version
312 3) BIOS version (major, minor)
313 4) BIOS date (in SCI date format)
314 5) Fn Key status
315 */
317 temp += sprintf(temp, "1.1 0x%04x %d.%d %d.%d 0x%04x 0x%02x\n",
318 tosh_id,
319 (tosh_sci & 0xff00)>>8,
320 tosh_sci & 0xff,
321 (tosh_bios & 0xff00)>>8,
322 tosh_bios & 0xff,
323 tosh_date,
324 key);
326 return temp-buffer;
327 }
328 #endif
331 /*
332 * Determine which port to use for the Fn key status
333 */
334 static void tosh_set_fn_port(void)
335 {
336 switch (tosh_id) {
337 case 0xfc02: case 0xfc04: case 0xfc09: case 0xfc0a: case 0xfc10:
338 case 0xfc11: case 0xfc13: case 0xfc15: case 0xfc1a: case 0xfc1b:
339 case 0xfc5a:
340 tosh_fn = 0x62;
341 break;
342 case 0xfc08: case 0xfc17: case 0xfc1d: case 0xfcd1: case 0xfce0:
343 case 0xfce2:
344 tosh_fn = 0x68;
345 break;
346 default:
347 tosh_fn = 0x00;
348 break;
349 }
351 return;
352 }
355 /*
356 * Get the machine identification number of the current model
357 */
358 static int tosh_get_machine_id(void __iomem *bios)
359 {
360 int id;
361 SMMRegisters regs;
362 unsigned short bx,cx;
363 unsigned long address;
365 id = (0x100*(int) readb(bios+0xfffe))+((int) readb(bios+0xfffa));
367 /* do we have a SCTTable machine identication number on our hands */
369 if (id==0xfc2f) {
371 /* start by getting a pointer into the BIOS */
373 regs.eax = 0xc000;
374 regs.ebx = 0x0000;
375 regs.ecx = 0x0000;
376 tosh_smm(&regs);
377 bx = (unsigned short) (regs.ebx & 0xffff);
379 /* At this point in the Toshiba routines under MS Windows
380 the bx register holds 0xe6f5. However my code is producing
381 a different value! For the time being I will just fudge the
382 value. This has been verified on a Satellite Pro 430CDT,
383 Tecra 750CDT, Tecra 780DVD and Satellite 310CDT. */
384 #if TOSH_DEBUG
385 printk("toshiba: debugging ID ebx=0x%04x\n", regs.ebx);
386 #endif
387 bx = 0xe6f5;
389 /* now twiddle with our pointer a bit */
391 address = bx;
392 cx = readw(bios + address);
393 address = 9+bx+cx;
394 cx = readw(bios + address);
395 address = 0xa+cx;
396 cx = readw(bios + address);
398 /* now construct our machine identification number */
400 id = ((cx & 0xff)<<8)+((cx & 0xff00)>>8);
401 }
403 return id;
404 }
407 /*
408 * Probe for the presence of a Toshiba laptop
409 *
410 * returns and non-zero if unable to detect the presence of a Toshiba
411 * laptop, otherwise zero and determines the Machine ID, BIOS version and
412 * date, and SCI version.
413 */
414 static int tosh_probe(void)
415 {
416 int i,major,minor,day,year,month,flag;
417 unsigned char signature[7] = { 0x54,0x4f,0x53,0x48,0x49,0x42,0x41 };
418 SMMRegisters regs;
419 void __iomem *bios = ioremap(0xf0000, 0x10000);
421 if (!bios)
422 return -ENOMEM;
424 /* extra sanity check for the string "TOSHIBA" in the BIOS because
425 some machines that are not Toshiba's pass the next test */
427 for (i=0;i<7;i++) {
428 if (readb(bios+0xe010+i)!=signature[i]) {
429 printk("toshiba: not a supported Toshiba laptop\n");
430 iounmap(bios);
431 return -ENODEV;
432 }
433 }
435 /* call the Toshiba SCI support check routine */
437 regs.eax = 0xf0f0;
438 regs.ebx = 0x0000;
439 regs.ecx = 0x0000;
440 flag = tosh_smm(&regs);
442 /* if this is not a Toshiba laptop carry flag is set and ah=0x86 */
444 if ((flag==1) || ((regs.eax & 0xff00)==0x8600)) {
445 printk("toshiba: not a supported Toshiba laptop\n");
446 iounmap(bios);
447 return -ENODEV;
448 }
450 /* if we get this far then we are running on a Toshiba (probably)! */
452 tosh_sci = regs.edx & 0xffff;
454 /* next get the machine ID of the current laptop */
456 tosh_id = tosh_get_machine_id(bios);
458 /* get the BIOS version */
460 major = readb(bios+0xe009)-'0';
461 minor = ((readb(bios+0xe00b)-'0')*10)+(readb(bios+0xe00c)-'0');
462 tosh_bios = (major*0x100)+minor;
464 /* get the BIOS date */
466 day = ((readb(bios+0xfff5)-'0')*10)+(readb(bios+0xfff6)-'0');
467 month = ((readb(bios+0xfff8)-'0')*10)+(readb(bios+0xfff9)-'0');
468 year = ((readb(bios+0xfffb)-'0')*10)+(readb(bios+0xfffc)-'0');
469 tosh_date = (((year-90) & 0x1f)<<10) | ((month & 0xf)<<6)
470 | ((day & 0x1f)<<1);
473 /* in theory we should check the ports we are going to use for the
474 fn key detection (and the fan on the Portage 610/Tecra700), and
475 then request them to stop other drivers using them. However as
476 the keyboard driver grabs 0x60-0x6f and the pic driver grabs
477 0xa0-0xbf we can't. We just have to live dangerously and use the
478 ports anyway, oh boy! */
480 /* do we need to emulate the fan? */
482 if ((tosh_id==0xfccb) || (tosh_id==0xfccc))
483 tosh_fan = 1;
485 iounmap(bios);
487 return 0;
488 }
490 static int __init toshiba_init(void)
491 {
492 int retval;
493 /* are we running on a Toshiba laptop */
495 if (tosh_probe())
496 return -ENODEV;
498 printk(KERN_INFO "Toshiba System Managment Mode driver v" TOSH_VERSION "\n");
500 /* set the port to use for Fn status if not specified as a parameter */
501 if (tosh_fn==0x00)
502 tosh_set_fn_port();
504 /* register the device file */
505 retval = misc_register(&tosh_device);
506 if (retval < 0)
507 return retval;
509 #ifdef CONFIG_PROC_FS
510 /* register the proc entry */
511 if (create_proc_info_entry("toshiba", 0, NULL, tosh_get_info) == NULL) {
512 misc_deregister(&tosh_device);
513 return -ENOMEM;
514 }
515 #endif
517 return 0;
518 }
520 static void __exit toshiba_exit(void)
521 {
522 remove_proc_entry("toshiba", NULL);
523 misc_deregister(&tosh_device);
524 }
526 module_init(toshiba_init);
527 module_exit(toshiba_exit);