ia64/linux-2.6.18-xen.hg

view Documentation/input/amijoy.txt @ 452:c7ed6fe5dca0

kexec: dont initialise regions in reserve_memory()

There is no need to initialise efi_memmap_res and boot_param_res in
reserve_memory() for the initial xen domain as it is done in
machine_kexec_setup_resources() using values from the kexec hypercall.

Signed-off-by: Simon Horman <horms@verge.net.au>
author Keir Fraser <keir.fraser@citrix.com>
date Thu Feb 28 10:55:18 2008 +0000 (2008-02-28)
parents 831230e53067
children
line source
1 Amiga 4-joystick parport extension
2 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
3 Parallel port pins:
5 (2) - Up1 (6) - Up2
6 (3) - Down1 (7) - Down2
7 (4) - Left1 (8) - Left2
8 (5) - Right1 (9) - Right2
9 (13) - Fire1 (11) - Fire2
10 (18) - Gnd1 (18) - Gnd2
12 Amiga digital joystick pinout
13 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
14 (1) - Up
15 (2) - Down
16 (3) - Left
17 (4) - Right
18 (5) - n/c
19 (6) - Fire button
20 (7) - +5V (50mA)
21 (8) - Gnd
22 (9) - Thumb button
24 Amiga mouse pinout
25 ~~~~~~~~~~~~~~~~~~
26 (1) - V-pulse
27 (2) - H-pulse
28 (3) - VQ-pulse
29 (4) - HQ-pulse
30 (5) - Middle button
31 (6) - Left button
32 (7) - +5V (50mA)
33 (8) - Gnd
34 (9) - Right button
36 Amiga analog joystick pinout
37 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
38 (1) - Top button
39 (2) - Top2 button
40 (3) - Trigger button
41 (4) - Thumb button
42 (5) - Analog X
43 (6) - n/c
44 (7) - +5V (50mA)
45 (8) - Gnd
46 (9) - Analog Y
48 Amiga lightpen pinout
49 ~~~~~~~~~~~~~~~~~~~~~
50 (1) - n/c
51 (2) - n/c
52 (3) - n/c
53 (4) - n/c
54 (5) - Touch button
55 (6) - /Beamtrigger
56 (7) - +5V (50mA)
57 (8) - Gnd
58 (9) - Stylus button
60 -------------------------------------------------------------------------------
62 NAME rev ADDR type chip Description
63 JOY0DAT 00A R Denise Joystick-mouse 0 data (left vert, horiz)
64 JOY1DAT 00C R Denise Joystick-mouse 1 data (right vert,horiz)
66 These addresses each read a 16 bit register. These in turn
67 are loaded from the MDAT serial stream and are clocked in on
68 the rising edge of SCLK. MLD output is used to parallel load
69 the external parallel-to-serial converter.This in turn is
70 loaded with the 4 quadrature inputs from each of two game
71 controller ports (8 total) plus 8 miscellaneous control bits
72 which are new for LISA and can be read in upper 8 bits of
73 LISAID.
74 Register bits are as follows:
75 Mouse counter usage (pins 1,3 =Yclock, pins 2,4 =Xclock)
77 BIT# 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00
78 JOY0DAT Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 X7 X6 X5 X4 X3 X2 X1 X0
79 JOY1DAT Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 X7 X6 X5 X4 X3 X2 X1 X0
81 0=LEFT CONTROLLER PAIR, 1=RIGHT CONTROLLER PAIR.
82 (4 counters total).The bit usage for both left and right
83 addresses is shown below. Each 6 bit counter (Y7-Y2,X7-X2) is
84 clocked by 2 of the signals input from the mouse serial
85 stream. Starting with first bit recived:
87 +-------------------+-----------------------------------------+
88 | Serial | Bit Name | Description |
89 +--------+----------+-----------------------------------------+
90 | 0 | M0H | JOY0DAT Horizontal Clock |
91 | 1 | M0HQ | JOY0DAT Horizontal Clock (quadrature) |
92 | 2 | M0V | JOY0DAT Vertical Clock |
93 | 3 | M0VQ | JOY0DAT Vertical Clock (quadrature) |
94 | 4 | M1V | JOY1DAT Horizontall Clock |
95 | 5 | M1VQ | JOY1DAT Horizontall Clock (quadrature) |
96 | 6 | M1V | JOY1DAT Vertical Clock |
97 | 7 | M1VQ | JOY1DAT Vertical Clock (quadrature) |
98 +--------+----------+-----------------------------------------+
100 Bits 1 and 0 of each counter (Y1-Y0,X1-X0) may be
101 read to determine the state of the related input signal pair.
102 This allows these pins to double as joystick switch inputs.
103 Joystick switch closures can be deciphered as follows:
105 +------------+------+---------------------------------+
106 | Directions | Pin# | Counter bits |
107 +------------+------+---------------------------------+
108 | Forward | 1 | Y1 xor Y0 (BIT#09 xor BIT#08) |
109 | Left | 3 | Y1 |
110 | Back | 2 | X1 xor X0 (BIT#01 xor BIT#00) |
111 | Right | 4 | X1 |
112 +------------+------+---------------------------------+
114 -------------------------------------------------------------------------------
116 NAME rev ADDR type chip Description
117 JOYTEST 036 W Denise Write to all 4 joystick-mouse counters at once.
119 Mouse counter write test data:
120 BIT# 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00
121 JOYxDAT Y7 Y6 Y5 Y4 Y3 Y2 xx xx X7 X6 X5 X4 X3 X2 xx xx
122 JOYxDAT Y7 Y6 Y5 Y4 Y3 Y2 xx xx X7 X6 X5 X4 X3 X2 xx xx
124 -------------------------------------------------------------------------------
126 NAME rev ADDR type chip Description
127 POT0DAT h 012 R Paula Pot counter data left pair (vert, horiz)
128 POT1DAT h 014 R Paula Pot counter data right pair (vert,horiz)
130 These addresses each read a pair of 8 bit pot counters.
131 (4 counters total). The bit assignment for both
132 addresses is shown below. The counters are stopped by signals
133 from 2 controller connectors (left-right) with 2 pins each.
135 BIT# 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00
136 RIGHT Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 X7 X6 X5 X4 X3 X2 X1 X0
137 LEFT Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 X7 X6 X5 X4 X3 X2 X1 X0
139 +--------------------------+-------+
140 | CONNECTORS | PAULA |
141 +-------+------+-----+-----+-------+
142 | Loc. | Dir. | Sym | pin | pin |
143 +-------+------+-----+-----+-------+
144 | RIGHT | Y | RX | 9 | 33 |
145 | RIGHT | X | RX | 5 | 32 |
146 | LEFT | Y | LY | 9 | 36 |
147 | LEFT | X | LX | 5 | 35 |
148 +-------+------+-----+-----+-------+
150 With normal (NTSC or PAL) horiz. line rate, the pots will
151 give a full scale (FF) reading with about 500kohms in one
152 frame time. With proportionally faster horiz line times,
153 the counters will count proportionally faster.
154 This should be noted when doing variable beam displays.
156 -------------------------------------------------------------------------------
158 NAME rev ADDR type chip Description
159 POTGO 034 W Paula Pot port (4 bit) bi-direction and data, and pot counter start.
161 -------------------------------------------------------------------------------
163 NAME rev ADDR type chip Description
164 POTINP 016 R Paula Pot pin data read
166 This register controls a 4 bit bi-direction I/O port
167 that shares the same 4 pins as the 4 pot counters above.
169 +-------+----------+---------------------------------------------+
170 | BIT# | FUNCTION | DESCRIPTION |
171 +-------+----------+---------------------------------------------+
172 | 15 | OUTRY | Output enable for Paula pin 33 |
173 | 14 | DATRY | I/O data Paula pin 33 |
174 | 13 | OUTRX | Output enable for Paula pin 32 |
175 | 12 | DATRX | I/O data Paula pin 32 |
176 | 11 | OUTLY | Out put enable for Paula pin 36 |
177 | 10 | DATLY | I/O data Paula pin 36 |
178 | 09 | OUTLX | Output enable for Paula pin 35 |
179 | 08 | DATLX | I/O data Paula pin 35 |
180 | 07-01 | X | Not used |
181 | 00 | START | Start pots (dump capacitors,start counters) |
182 +-------+----------+---------------------------------------------+
184 -------------------------------------------------------------------------------